(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Pliers/Nippers/Pincers（Page14）
| Days to Ship |
|
|---|
-
End Sleeve Crimping Pliers 9781
KNIPEX
[Features]
· For crimping 0.5 to 6.0 mm2 end sleeves compliant with article 1 or article 4 of DIN46228.
· Ideal for crimping work in deep and narrow areas such as switch boxes.
· Oil tempered and quenched special tool steel is used for the material.
· Compatible terminal: End sleeve.
· Head finish: Polished.
· Handle Specification: Plastic Coating- Volume Discount
Standard Price: MYR 556.52 Days to Ship: 10 Day(s) -
Crimper Pliers 9752-04/9752-05/9752-06/9752-08/9752-09/9752-10/9752-13/9752-19/9752-23
KNIPEX
Jaw replacement cannot be performed.
[Features]
· Next generation crimping pliers that adopt a design that maximizes the effect of the principle of leverage.
· For crimping work with terminals, etc., that do not require soldering.
· It can crimp with 30% less force than the conventional crimp pliers.
· Head finish: Black finish.
· Handle specification: Plastic coating.Standard Price: MYR 1,223.20- Days to Ship: 5 Day(s) or more -
Crimper Pliers 9752-14/9752-20
KNIPEX
The design maximizes leverage, ensuring excellent crimping with less power. The 20° angled head, lightweight body, and short type design make working much easier.
[Features]
· For crimping work with terminals, etc., that do not require soldering.
· This series of crimping pliers has been set precisely at the factory to conform with standards.
· Compatible terminal: (9752-14) Open barrel terminal (2.8+4.8 mm).
· Compatible Terminal: (9752-20) COAX, BNC, TNC Connector.
· SW1.72 mm for Conductor.
· shield5.4 mm for RG58.
· shield6.48 mm for RG59/62/71/223: 9752-20.Standard Price: MYR 1,686.57 Days to Ship: 5 Day(s) or more -
Crimp Combination Pliers, 9752-50
KNIPEX
For crimping work with terminals, etc., that do not require soldering.
Standard Price: MYR 1,193.23- Days to Ship: 5 Day(s) or more -
Crimping pliers (for scotch lock connector)
KNIPEX
For crimping U-shaped contact single scotch connectors for telephone lines and signal cables.
[Features]
· For crimping single scotch connectors for telephone lines and signal cables.
· U-shaped part removes coating and coverings, so stripping (peeling) is not required.
· The side cutter has been carefully quenched.
· Compatible terminal: Single Scotch lock connector.
· Head finish: Polished.
· Handle Specification: Plastic CoatingStandard Price: MYR 451.90 Days to Ship: 18 Day(s) -
Western Plug Crimping Pliers (6, 8-Pin) 9751-10
KNIPEX
[Features]
· Professional tool for cutting and stripping telephone ribbon cable.
· For crimping of RJ11/12 (width 9.65 mm) type and RJ45 (width 11.68 mm) type Western plugs with 6 or 8 pins.
· As force can be applied in parallel, it can be securely crimped.
· Compatible terminal: Western plug.
· Replacement blade part number: 9759-06.
· Head finish: Polished.
· Handle Specification: Plastic Coating- Volume Discount
Standard Price: MYR 448.39 Days to Ship: 9 Day(s) -
End Sleeve Crimping Pliers 9753-04/9753-14
KNIPEX
[Features]
· For crimping end sleeves compliant with article 1 or article 4 of DIN46228.
· For crimping work with terminals, etc., that do not require soldering.
· Insert the end sleeve from the side of the tool and crimp it.
· Compatible terminal: End sleeve.
· Head finish: Polished.
· Handle specification: Comfort.
· Square crimping: 9753-04.
· Hex crimping: 9753-14.Standard Price: MYR 1,846.10- Days to Ship: 8 Day(s) -
End Sleeve Crimping Pliers 9753-08/9753-09
KNIPEX
[Features]
· For crimping end sleeves compliant with article 1 or article 4 of DIN46228.
· For crimping work with terminals, etc., that do not require soldering.
· Insert the end sleeve from the front of the tool and crimp it.
· Compatible terminal: End sleeve.
· Head finish: Polished.
· Handle specification: Comfort.
· Square crimping: 9753-08.
· Hex crimping: 9753-09.Standard Price: MYR 1,899.27 Days to Ship: 9 Day(s) or more -
KNIPEX
[Features]
· Easy to handle nippers that can cut objects with less force than general bolt end-cutting nippers.
· Style: 12° tip bend.
· Head Finish: PolishedStandard Price: MYR 592.71 Days to Ship: 5 Day(s) or more -
Grip Pliers for Welding 4224-280
KNIPEX
[Features]
· Enables plates, piping, etc., to be firmly gripped.
· Head finish: Nickel chrome plated.
· Handle Specification: Nickel Chrome Plating- Volume Discount
Standard Price: MYR 434.21 Days to Ship: 8 Day(s) -
Grip Pliers for Welding 4234-280
KNIPEX
[Features]
· Enables plates, piping, etc., to be firmly gripped.
· Head finish: Nickel chrome plated.
· Handle Specification: Nickel Chrome Plating- Volume Discount
Standard Price: MYR 421.54 Days to Ship: 8 Day(s) -
KNIPEX
[Features]
· For tightening and loosening thin bolts and nuts.
· Oil tempered and quenched special tool steel is used for the material.
· Style: 20° bent (8421-200).
· Head finish: Polished.
· Handle specification: Plastic coating.Standard Price: MYR 263.54 Days to Ship: 5 Day(s) or more -
FIT (F Type) Nippers with Spring
TSUNODA
Fits perfectly in the palm of the hand. For cutting iron, copper and aluminum wire and stranded cable.
Standard Price: MYR 107.41 Days to Ship: 11 Day(s) -
FIT (F Type) Pliers with Spring
TSUNODA
It fits perfectly in the palm of your hand. Suitable for processing boards and wire rods.
·It has a wire strip hole.
(⌀1.2)
·CRAFTTOOLSFIT with combination pliers spring
· Carbon steel for machine structuresStandard Price: MYR 106.93 Days to Ship: 9 Day(s) -
FIT (F Type) Long-Nose Pliers with Spring
TSUNODA
Fits perfectly in the palm of the hand. It is convenient for bending wire using the tip.
Standard Price: MYR 87.13 Days to Ship: 11 Day(s) -
TSUNODA
Sandwich structure without play even when well-used. There is a blade at the tip of the thin head, so it is ideal for cutting in narrow places.
Standard Price: MYR 168.45 Days to Ship: 9 Day(s) -
TSUNODA
Sandwich structure without play even when well-used. As the tip has been finished very finely, small rounding can also be produced cleanly.
Standard Price: MYR 100.52 Days to Ship: 8 Day(s) or more -
Trinity Round Nose Pliers (with groove) TM-03
TSUNODA
Sandwich structure without play even when well-used. It is used for detailed machining, or wire cutting, using the tip.
Standard Price: MYR 182.85 Days to Ship: 9 Day(s) -
Trinity Round Nose Pliers (with groove) TM-04
TSUNODA
Sandwich structure without play even when well-used. Convenient for mounting parts at places where fingers cannot enter.
Standard Price: MYR 156.20 Days to Ship: 9 Day(s) -
Trinity Curved Nose Needle Nose Pliers (with groove)
TSUNODA
Sandwich structure without play even when well-used. As the tip is bent through 45 degrees, it is convenient because components on a desktop can be held easily.
Standard Price: MYR 177.88 Days to Ship: 8 Day(s) -
Trinity Fine Nose Needle Nose Pliers (without groove)
TSUNODA
Sandwich structure without play even when well-used. You can work without injury even in places where fingers cannot enter.
Standard Price: MYR 157.28 Days to Ship: 9 Day(s) -
Trinity Fine Nose Lead Pliers (without groove)
TSUNODA
Sandwich structure without play even when well-used. Small, difficult-to-hold components can be attached and removed without damage.
Standard Price: MYR 106.14 Days to Ship: 10 Day(s) or more -
Trinity Flat Mouth Lead Pliers (without groove)
TSUNODA
Sandwich structure without play even when well-used. Can bend metal plates, and crush caulking balls or ball chips.
Standard Price: MYR 123.80 Days to Ship: 9 Day(s) -
TSUNODA
Uses rust resistant high grade stainless steel, which is used outdoors and for work in high moisture areas.
Standard Price: MYR 187.99 Days to Ship: 9 Day(s) -
Stainless Steel Multi-Longnose (Head Type)
TSUNODA
Uses rust resistant high grade stainless steel, which is used outdoors and for work in high moisture areas.
Standard Price: MYR 180.23 Days to Ship: 9 Day(s) -
TSUNODA
Uses rust resistant high grade stainless steel, which is used outdoors and for work in high moisture areas.
Standard Price: MYR 174.01 Days to Ship: 10 Day(s) -
TSUNODA
The wide grip part makes it ideal for holding board.
Also, the grip is vinyl-coated to prevent slipping.Standard Price: MYR 82.68 Days to Ship: 11 Day(s) -
Standard Price: MYR 88.53 Days to Ship: 9 Day(s) -
Tapered Radio Pliers Bent Type FNP-125N
TSUNODA
The tip is bent, making it suitable for detailed work such as attaching and removing parts that you don't want to damage, or working on the tip.
Standard Price: MYR 77.06 Days to Ship: 11 Day(s) -
TSUNODA
Uses a sandwich structure (three layered) without play even when well-used.
Standard Price: MYR 154.66 Days to Ship: 9 Day(s) -
TSUNODA
One side is flat to prevent shifting of wire materials, enabling easy rounding.
Standard Price: MYR 118.83 Days to Ship: 11 Day(s) -
Combination Pliers, Anti-Rust Oil Treatment【1-4 Pieces Per Package】
TSUNODA
Convenient for electrical work, steel wire cutting, bending, etc.
Non-oxidation overall hardening, blade high-frequency hardening.Standard Price: MYR 51.26- Days to Ship: 8 Day(s) or more -
Micro Long Nose Plier, With Spring, With Serrated Tip
TSUNODA
A convenient multi-functional type that can also handle cutting and peeling.
Non-oxidation overall hardening, blade high-frequency hardening.Standard Price: MYR 108.88 Days to Ship: 9 Day(s) -
Standard Price: MYR 62.56 Days to Ship: 8 Day(s) or more -
Standard Price: MYR 41.56 Days to Ship: 9 Day(s) -
Standard Price: MYR 61.69 Days to Ship: 8 Day(s) or more -
TSUNODA
Since there are no grooves in the jaw, you can grip flat, small, and fine objects and work on them without damaging them.
Standard Price: MYR 62.76 Days to Ship: 10 Day(s) -
TSUNODA
Even if it is small, it can "grab," "cut," and "bend," making it easier to perform detailed work such as attaching and removing parts, cutting wire rods, and processing the tip.
Standard Price: MYR 66.05 Days to Ship: 9 Day(s) -
TSUNODA
It's compact size makes it easy to carry around, making it easy to carry out detailed work such as attaching and removing parts, cutting wire rods, and processing the tip.
Standard Price: MYR 68.75 Days to Ship: 9 Day(s) -
TSUNODA
Since the tip is long and thin, it can be used for work in narrow and intricate places, and when the gripper pinches, the groove bites in, allowing you to work with great force.
Standard Price: MYR 80.73 Days to Ship: 9 Day(s) -
Standard Price: MYR 82.91 Days to Ship: 8 Day(s) -
TSUNODA
Useful for cutting in electrical work and wiring and bending metal plates.
Standard Price: MYR 63.60 Days to Ship: 8 Day(s) or more -
TSUNODA
Useful for cutting in electrical work and wiring and bending metal plates. With a spring that opens and closes which is ideal for continuous cutting.
Standard Price: MYR 65.53- Days to Ship: 9 Day(s) -
TSUNODA
The cutting surface is cut beautifully, and it is convenient for cutting wall edges.
Standard Price: MYR 84.22 Days to Ship: 8 Day(s) or more -
TSUNODA
The long and narrow shape makes it convenient for maintenance of electronic equipment.
·Overall length (mm): 145
·Weight (g): 70Standard Price: MYR 79.65- Days to Ship: 9 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Category |
| Plier Type |
| Plier Type |
| Nipper Type |
| Overall Length(mm) |
| Shaft/hole |
| With or without Spring |
| Steel Wire Cutting Performance(φ/mm) |
| Copper Wire Cutting Performance(φ/mm) |
| Piano Wire Cutting Performance(φ/mm) |
| Plastic Cutting Performance(φ/mm) |
| Stranded Wire Cutting Ability(φ/mm) |
| Stainless steel cutting ability(φ/mm) |
| VA (VVF) Wire Cutting Capacity(φ/mm) |
| With/without tip claw replacement function |
| Tip claw diameter(mm) |
| Compatible Ring Size(mm) |
| Parts Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA | TSUNODA |
| Product Series | Crimper Pliers 9752-04/9752-05/9752-06/9752-08/9752-09/9752-10/9752-13/9752-19/9752-23 | Combination Pliers, Anti-Rust Oil Treatment【1-4 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 10 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 18 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) or more | 5 Day(s) or more | 8 Day(s) | 8 Day(s) | 5 Day(s) or more | 11 Day(s) | 9 Day(s) | 11 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 10 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 10 Day(s) | 11 Day(s) | 9 Day(s) | 11 Day(s) | 9 Day(s) | 11 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 10 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 9 Day(s) |
| Product Category | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Nippers | Pliers | Pliers | Pliers | Nippers | Pliers | Pliers | Nippers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Nippers | Pliers | Pliers | Pliers | Nippers | Pliers | Pliers | Pliers | Nippers | Nippers | Nippers | Pliers | Pliers | Pliers | Pliers | Nippers | Pliers | Pliers | Nippers | Pliers |
| Plier Type | - | - | - | - | Pliers | - | - | - | - | Pliers | Pliers | Pliers | - | - | - | - | Pliers | - | - | - | - | - | - | - | - | - | Pliers | Pliers | Pliers | - | - | - | - | - | - | - | Pliers | - | - | - | - | - | - | - | - |
| Plier Type | Pliers | Pliers | Pliers | Pliers | - | Pliers | Pliers | Pliers | - | - | - | - | - | Pliers | Longnose pliers | - | - | Longnose pliers | Longnose pliers | Longnose pliers | Longnose pliers | Lead Pliers | Lead Pliers | Pliers | Longnose pliers | - | - | - | - | - | Pliers | Pliers | Longnose pliers | - | - | - | - | Pliers | Longnose pliers | Pliers | - | Longnose pliers | Longnose pliers | - | Longnose pliers |
| Nipper Type | - | - | - | - | - | - | - | - | Nippers | - | - | - | Nippers | - | - | Nippers | - | - | - | - | - | - | - | - | - | Nippers | - | - | - | Nippers | - | - | - | Nippers | Nippers | Nippers | - | - | - | - | Nippers | - | - | Nippers | - |
| Overall Length(mm) | 180 | 250 | 195 | 220 | 155 | 190 | 180 | 190 | 200 | 280 | 280 | 200 | 134 | 140 | 163 | 122 | 128 | 136 | 154 | 151 | 154 | 128 | 128 | 175 | 167 | 138 | 210 | 160 | 132 | 140 | 140 | 137 ～ 212 | 162 | 116 | 127 | 118 | 118 | 118 | 124 | 144 | 129 | 161 | 140 ～ 161 | 132 | 145 ～ 165 |
| Shaft/hole | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With or without Spring | NA | - | - | - | Available | - | Available | - | - | - | - | - | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | NA | NA | NA | NA | Available | Available | NA | NA | NA | Available | Available | Available | Available | Available | Available | Available | Available | Available | NA | Available | NA | Available |
| Steel Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | 1 | 1 | 1.2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 2 | - | - | - | - | - | - | - | - | - | 1.2 | 1 ～ 1.2 | - | - |
| Copper Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | 2.6 | 2.6 | 2.6 | 1 | - | 1.2 | 1.2 | 1.2 | 1.2 | - | - | 2 | 1.2 | 1.2 | - | - | - | 2 | 2 | 2.6 ～ 4 | 2.6 | 2 | 1 | 2 | - | 2 | 2 | 2 | 2 | 2.6 | 2 ～ 2.6 | 2 | 2 ～ 2.6 |
| Piano Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | 3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Plastic Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 | - | - | - | - | - | - | - | - | - |
| Stranded Wire Cutting Ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | 2 | 2 | 2 | 1.25 | - | - | - | - | - | - | - | 2 | 1.25 | 1.25 | - | - | - | 2 | 2 | 2 ～ 8 | 2 | 2 | 2 | 2 | - | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Stainless steel cutting ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | 1 | 0.8 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.6 | - | 0.8 ～ 1.6 | 0.9 | 0.9 | - | - | - | 0.9 | 0.9 | 0.9 | 0.9 | 1 | 0.8 ～ 1 | 0.6 | 0.9 |
| VA (VVF) Wire Cutting Capacity(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With/without tip claw replacement function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip claw diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Ring Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Parts Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Product Category
-
Plier Type
-
Plier Type
-
Nipper Type
-
Overall Length(mm)
- 36
- 46
- 100
- 102
- 102.5
- 104
- 105
- 106
- 108
- 109
- 110
- 111.5
- 112
- 112.5
- 113.5
- 115
- 116
- 117
- 117.5
- 118
- 120
- 122
- 123
- 124
- Approx. 124
- 125
- 125.5
- 126
- 127
- 128
- 128.5
- 129
- 130
- 131
- 132
- 132.5
- 133
- 133.5
- 134
- 134.5
- 135
- 135.5
- 136
- Approx. 136
- 137
- 138
- Approx. 138
- 139
- 140
- 141
- 142
- 143
- 144
- 144.5
- 145
- 146
- 146.5
- 147
- 148
- 149
- Approx. 149
- 150
- 151
- 152
- Approx. 152
- 152.5
- 153
- 154
- 154.5
- 155
- 155.5
- 156
- Approx. 156
- 157
- 158
- 158.5
- 159
- 160
- Approx. 160
- 161
- 162
- 163
- Approx. 163
- 164
- 165
- 166
- 167
- 167.5
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 183
- 185
- 186
- 187
- 187.5
- 188
- 189
- 190
- 192
- 193
- 194
- 195
- 197
- 199
- 200
- Approx. 200
- 201
- 201.5
- 202
- 203
- 204
- 205
- 206
- 207
- 208
- 210
- 212
- 213
- 214.5
- 215
- 216
- 217
- 219
- 220
- 223
- 223.5
- 224
- 225
- 227
- 228
- 229
- 230
- 232
- 235
- 236
- 240
- 241
- 242
- 245
- 249
- 250
- 252
- 253
- 260
- 265
- 266
- 275
- Approximately 275
- 280
- 285
- Approximately 285
- 287
- 290
- 297
- 300
- 305
- 310
- 320
- 370
- 380
- 400
- 443
- 455
- 465
- 560
- 570
- 580
- 590
- 600
- 620
- 770
- 920
-
Shaft/hole
-
With or without Spring
-
Steel Wire Cutting Performance(φ/mm)
- 0.18-1.9
- 0.18-1.6
- 0.2 to 0.9
- 0.3-2.6
- 0.5
- 0.6
- 0.8
- 0.8 (Soft Iron Wire)
- 0.8×1.2
- Tip blade: 0.8 or less, Side blade: 1.2 or less
- 0.9
- 1
- 1.2
- 1.2 (Soft Iron Wire)
- Approx. 1.3
- 1.4
- 1.5
- 1.6
- 1.6 (soft iron wire)
- 1.8
- 1.9
- 2
- 2.15
- 2.2
- 2.3 (soft iron wire)
- 2.4
- 2.5
- 2.6
- 2.75
- 2.8
- 3
- 3..5
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.8
- 5
- 5.5
- -
- Cannot cut
-
Copper Wire Cutting Performance(φ/mm)
- 0.10～0.60
- 0.10～0.65
- 0.1～0.80
- 0.10～0.80
- 0.1 to 1.00
- 0.10 to 1.00
- 0.1～1.25
- 0.10～1.25
- 0.13-1.2
- 0.18-1.6
- 0.18～0.8
- 0.2～0.80
- 0.20～0.80
- 0.2～1.00
- 0.20～1.00
- 0.2～1.20
- 0.20～1.20
- 0.20～1.25
- 0.2～1.60
- 0.20～1.60
- 0.2 to 2
- 0.2 to 2.3
- 0.3～1.60
- 0.30～1.60
- 0.3～2.00
- 0.30～2.00
- 0.35～0.80
- 0.35～1.00
- 0.35 to 1.25
- 0.4～2.00
- 0.40～2.00
- 0.5
- 0.6
- 0.8
- 0.9
- 1
- 1.00～0.80
- 1.2
- Tip blade: 1.2 or less, Side blade: 1.2 or less
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.8
- 2
- 2.3
- 2.5
- 2.6
- 2.8
- 2.9
- 3
- 3.2
- 3.3
- 3.5
- 3.6
- 4
- 4.5
- 5
- 7.0
- 8.0
- 9
- 10
- 11.5
- 12
- 13
- 14
- 15
- -
-
Piano Wire Cutting Performance(φ/mm)
-
Plastic Cutting Performance(φ/mm)
- 1
- 1.5
- 2
- 3
- 4
- 5
- 5.0(ABS resin)
- 6
- 6.0(ABS resin)
- 8
- 9
- 10
-
Stranded Wire Cutting Ability(φ/mm)
-
Stainless steel cutting ability(φ/mm)
-
VA (VVF) Wire Cutting Capacity(φ/mm)
-
With/without tip claw replacement function
-
Tip claw diameter(mm)
- 0.5–0.7
- 0.8
- 0.9
- 1.25
- 1.3
- Tip diameter (ømm): 1.3
- 1.4
- 1.7
- 1.8
- Tip diameter (ømm): 1.8
- 2
- 2.0～2.4
- 2.25
- 2.3
- 2.5
- 3.2
- 3.4
- 3.5
- 4.4
- 4.5
- 16.5
-
Compatible Ring Size(mm)
-
Parts Type
Narrow search by specifying Manufacturer
-
- ESCO (378)
- KNIPEX (244)
- MUROMOTO TEKKO (92)
- FUJIYA (63)
- HOZAN (42)
- TSUNODA (40)
- TOP (40)
- TRUSCO NAKAYAMA (38)
- ENGINEER (37)
- KTC(KYOTO TOOL) (34)
- 3PEAKS (29)
- KEIBA (27)
- WIHA (25)
- TONE (21)
- LOBTEX (18)
- MITOLOY (14)
- HANAZONO TOOL (10)
- IGARASHIPLIERS (10)
- SMATO (9)
- ARC (8)
- Ｍ＆Ｍ (8)
- SUPER TOOL (8)
- E VALUE (7)
- GRIPONTOOLS (7)
- LINDSTROM (7)
- SIGNET (7)
- SK 11 (7)
- TGK (5)
- AS ONE (4)
- ARC GREATTOOL (3)
- HAZET (3)
- TRAD (3)
- GOOT (2)
- HANDIWORK (2)
- NEPROS (2)
- ANEX (1)
- BESTTOOL (1)
- H & H (1)
- PROZONE (1)
CAD
-
- 2D
- 3D
Related Categories to Pliers/Nippers/Pincers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy