(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Vises（Page2）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
TAKAGI
[Applications]
· For fixing such as welding, drilling and adhesive work
[Specifications]
· Max. opening width: approx. 200 mm- Volume Discount
Standard Price: MYR 85.77 Days to Ship: 4 Day(s) or more -
Parallel Block for Vises - Plain Model【2 Pieces Per Package】
MISUMI
[Features]
·Parallel block that allows you to specify the height in 1 mm increments and freely adjust the gripping width of the workpiece
·Raw material type that is safe even if tool interferes and hardening material type with little settling are availableDays to Ship: 9 Day(s) or more -
NABEYA
For cast parts, the tough cast iron body, the movable body, and the female thread are designed to maintain sufficient strength with a hard material cast under the quality control of a JIS factory. Heading is used for the stopper balls on both ends of the handle to prevent them from falling out. Features rubber rings attached on both ends of the handle on the inside to prevent hands and fingers from getting caught.
- Volume Discount
Standard Price: MYR 2,297.93- Days to Ship: 4 Day(s) or more -
NABEYA
Double clamp type when shipped. Two workpieces can be quickly clamped at the same time even when they have different sizes. When tightened, the Loctite lift prevention mechanism restrains the workpiece from rising up. Can be made into a single clamp type as the standard accessories are reassembled, and the body is made of ductile cast iron that has been quenched on the sliding surface.
Standard Price: MYR 15,675.82- Days to Ship: 13 Day(s) or more -
C-Clamp, B Type, Standard Eco Series
LOBTEX
Approximately 35% less expensive than the manufacturer's conventional products. Strength and quality are equivalent to the conventional product (B type). Tray is mountable.
- Volume Discount
Standard Price: MYR 68.32- Days to Ship: 9 Day(s) -
NABEYA
[Features]
· Capable of easily clasping long objects that cannot be tightened with machine vises.
· Can clamp any work whatever the table (milling machine, sabre, boring machine, etc.) is.
· Convenient for processing of mass produced products.
· Large opening depth.- Volume Discount
Standard Price: MYR 4,743.56- Days to Ship: 12 Day(s) or more -
Vise Mounting Bolt Set【3 Pieces Per Package】
NABEYA
Provided as a set for vise mounting. A set that includes 3 bolts, 3 flat washers, and 3 spring washers.
Standard Price: MYR 87.53 Days to Ship: 4 Day(s) or more -
NABEYA
Beta vise model A components for medium drilling machines.
- Volume Discount
Standard Price: MYR 184.03 Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· It is for light work in steel-plate pressing.
· Lower price with mass production.
· The handle is unichrome plated.- Volume Discount
Standard Price: MYR 24.54- Days to Ship: 4 Day(s) or more -
NABEYA
Made of ductile FCD600, even stronger than cast steel, and has a 35% larger mouth opening. The movable part and main unit are ductile FCD600 which will not be damaged. The high-strength socket S15CK has undergone carburizing and has been machined into a U-shape with 3 set screws to prevent excessive loosening due to impacts from above.
Standard Price: MYR 14,004.90 Days to Ship: 13 Day(s) or more -
Engineer's Vise Jaws (2 Pieces 1 Set)
NABEYA
[Features]
A lead type vise · A sturdy heavy-duty lead type vise.
A jaw plate (2 pcs./set) part.
·Compatible vise: 75/100/125/150/200/250- Volume Discount
Standard Price: MYR 194.82- Days to Ship: 6 Day(s) or more -
HOZAN
X-Y table optimal for precision drilling of circuit boards, etc.
[Features]
· Combining it with a desk drill press makes it optimal for precision hole drilling of circuit boards, etc.
· A small table is adopted for desktop use.
· Workability is further enhanced by combining it with a mini vise (K-24) (with clamp, for K-21).
[Application]
· It also corresponds to drilling of equal pitch.- Volume Discount
Standard Price: MYR 175.52- Days to Ship: 4 Day(s) or more -
NABEYA
[Features]
· The 4 sides excluding the end faces have undergone finishing grinding and are machined in pairs.
· S50C type hardened to HRC46-53 with improved wear resistance.
· Comes inside a strong wooden storage case.
· Also sold separately.
· By using a high-precision parallel block to find the parallelism, precision machining can be performed while preventing the workpiece from floating- Volume Discount
Standard Price: MYR 2,910.66- Days to Ship: 4 Day(s) or more -
Loctite Precision Machine Vise
NABEYA
The lifting prevention mechanism suppresses the lifting of movable parts or workpieces. Made of ductile cast iron to prevent bending and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched (HRC45). The accuracy is higher than the former JIS 0 class. Even if it wears off, it can be easily disassembled to correct accuracy. The parallel accuracy of the parallel specification is within 0.01.
- Volume Discount
Standard Price: MYR 5,248.38- Days to Ship: 6 Day(s) or more -
Loctite Hydraulic Machine Vise Step Jaws
NABEYA
Optional parts for the machining vise series.
- Volume Discount
Standard Price: MYR 1,166.22 Days to Ship: 7 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· With the resin cover, no damage is caused to the material.
· It can firmly hold the material.
· It can firmly hold the material.Standard Price: MYR 15.23- Days to Ship: 8 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· It is exclusively used for perpendicular fixed welding of steel material.
· The side and bottom surfaces have been polished, so they can be processed more accurately.
· A revolutionary clamp that can accomplish speedy welding by temporarily holding and mounting the object.
· Ideal for right angle fixation, welding and brazing of square and round pipes.Standard Price: MYR 810.06- Days to Ship: 8 Day(s) -
Drilling Machine Vise (Reinforced)
TRUSCO NAKAYAMA
[Features]
· A V groove cap (HRC50 to 55 hardness), which is useful for fastening round and irregular articles, is included as standard equipment and provides an excellent retaining force.Standard Price: MYR 757.77- Days to Ship: 8 Day(s) -
Vise Friend【2 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Holds the workpiece without damaging its surface.
· One-touch magnetic attachment/detachment to vises.
· The pad can be replaced.
[Applications]
· Avoids damage caused by tightening onto the mouthpiece of the vise.Standard Price: MYR 69.79- Days to Ship: 8 Day(s) -
Precision vise (wrench tightening type) lifting prevention structure type
TRUSCO NAKAYAMA
[Features]
· Precision finishing by total quenching, total grinding.
· Precision can be retained for long periods of time to prevent uplift.
· Excellent squareness and parallelism enable super-precise processing.
[Applications]
· It is secured to an electromagnetic chuck and used in precision machining.Standard Price: MYR 1,751.31- Days to Ship: 8 Day(s) -
Precision Stainless Steel Vise DM30-1/30-2
NIHONAUTOMATIC
This type enables stabler perpendicular machining. * DM30-2 is a detachable handle type.
Standard Price: MYR 7,257.52 Days to Ship: 11 Day(s) or more -
Precision Stainless Steel Vise DN80-1/80-2
NIHONAUTOMATIC
Can be used for a wide range of cutting, grinding, and tapping using NCs/MCs that require high precision. * DN80-2 is a detachable handle type.
Standard Price: MYR 9,770.54- Days to Ship: 11 Day(s) or more -
TRAD
[Specifications]
·It is made of tough cast iron and equipped with a rotating disk for convenient processing.
·The home vise is designed so that it can be fixed to the workbench.Standard Price: MYR 292.86 Days to Ship: 6 Day(s) or more -
BESSEY
[Features]
·A speed clamp with an arm that slides up and down for instant tightening.
[Applications]
·For woodworking, furniture, sheet metal, and DIY.Standard Price: MYR 196.27- Days to Ship: 8 Day(s) -
BESSEY
[Features]
·A one-touch clamp dedicated to machine tools such as drilling machines and milling machines.
·The position can be changed freely, and the tightening pressure is excellent.
·For mounting, insert and fix in the T-groove of the table.
·It can rotate 360° horizontally and fix the workpiece freely.
[Applications]
·Steel and machining.Standard Price: MYR 1,352.74- Days to Ship: 8 Day(s) -
BESSEY
[Features]
· It is exclusively used for perpendicular fixed welding of steel material.
· A revolutionary clamp that can accomplish speedy welding by temporarily holding and mounting the object, as well as easily fixing objects at 90°, even in the case of materials with different external dimensions.
· Ideal for right angle fixation, welding and brazing of square and round pipes with both identical and differing external dimensions.
[Applications]
· For the welding and canning industries.Standard Price: MYR 1,426.65- Days to Ship: 8 Day(s) or more -
GISUKE
[Features]
·Lightweight aluminum
[Applications]
·For welding, drilling, woodworking and gluingStandard Price: MYR 12.63- Days to Ship: 4 Day(s) or more -
RIKEN KEISOKUKI
For each of the normal, horizontal, and vertical positions, there is 5 μm accuracy for parallelism and squareness. This product has all faces fully quenched.
Standard Price: MYR 8,085.27 Days to Ship: 11 Day(s) or more -
"Curved Jaw-Type Locking Pliers" (with Wire Cutter)
KTC(KYOTO TOOL)
Curved jaws with teeth capable of securely fixing pipes, etc. Can be used as a wire cutter.
- Volume Discount
Standard Price: MYR 74.35- Days to Ship: 8 Day(s) or more -
L Type Clamp (Heavy Duty Type) Standard Type
TRUSCO NAKAYAMA
Strong type can be tightened more securely by final wrench tightening using hex hole on screw head. The maximum tightening pressure at 150 mm clamping is 11.5 kN. Heavy-duty adapter can tighten angles up to about 35°.
Standard Price: MYR 329.07- Days to Ship: 8 Day(s) -
SIGNET
[Features]
· Base has 5 holes for mounting to a workbench.
· With swivel pads included, tapered objects can also be fixed.- Volume Discount
Standard Price: MYR 414.06 Days to Ship: 6 Day(s) or more -
TOP
[Features]
· The push screw part is tough and accurate and can be used for many years due to its rolling machining.
· Speedy operation is possible with a handle.
· The handle head is hexagonal and can be further tightened with a tool such as a wrench.
· The frame is specially shaped so that it can be used safely without bending or torsion.- Volume Discount
Standard Price: MYR 112.65- Days to Ship: 9 Day(s) or more -
GRIPONTOOLS
[Features]
· Epoxy resin coating makes it at least 10 times more resistant to corrosion than nickel plated parts.
· Featuring a long nose shape ideal for clamping in narrow locations.
[Applications]
· For plate metal, welding work.- Volume Discount
Standard Price: MYR 167.35- Days to Ship: 10 Day(s) -
GRIPONTOOLS
[Features]
· Epoxy resin coating makes it at least 10 times more resistant to corrosion than nickel plated parts.
· Ideal for holding sheet metal during sheet metal work.
[Applications]
· For plate metal, welding work.Standard Price: MYR 216.45 Days to Ship: 8 Day(s) -
TRUSCO NAKAYAMA
[Specifications]
·Long size.
·Deep clamping is possible.
·Materials: Cold rolled steel plateStandard Price: MYR 454.95- Days to Ship: 8 Day(s) -
Clamp Multi-Deep Jaw Type, Heavy-Duty Type Adapter
TRUSCO NAKAYAMA
[Features]
· With its deep jaws, the clamp can be attached even when objects are in the way.Standard Price: MYR 443.59- Days to Ship: 8 Day(s) or more -
Parts for C-Clamp, Cap, Ring (B Type C-Clamps)
TRUSCO NAKAYAMA
[Specifications]
·Cap ring for B-type C-Clamp.
·Tip of screw is spherical.Standard Price: MYR 23.99- Days to Ship: 8 Day(s) -
SUPER TOOL
[Features]
· The main body can be mounted at a tilt of up to 24 degrees.
· The spherical seat and washer can firmly fasten workpieces.- Volume Discount
Standard Price: MYR 158.33- Days to Ship: 9 Day(s) or more -
Uni Clamp, Independent Type, Part (Main Body and Independent Metal Washer Set)
SUPER TOOL
[Features]
· A dedicated size which fits snugly to the injection molding machine.- Volume Discount
Standard Price: MYR 94.99- Days to Ship: 9 Day(s) or more -
SUPER TOOL
[Features]
· It moves straight up and down smoothly.
· Built-in bearing allows level adjustments to be made with minimal force.
· Ball swivel can be set to the desired angle.- Volume Discount
Standard Price: MYR 1,450.99- Days to Ship: 9 Day(s) or more -
L‑Type Clamp (Heavy-Duty Model) Heavy Type
SUPER TOOL
[Features]
· With the heavy-duty model, even securer clamping can be achieved by tightening the hexagonal screw head as far as it will go using a wrench.
· The maximum tightening pressure when clamping 150 mm is 13.5 kN.
· The heavy-duty adapter can be tightened to an angle of up to approx. 35°.- Volume Discount
Standard Price: MYR 604.94- Days to Ship: 9 Day(s) or more -
ENGINEER
[Features]
· The back and both of the sides are machined to right angles, so it can be placed vertically or horizontally.
· With special jaws allowing you to clamp thin plates, cylindrical rods, squared timber and more.
· Turning the jaws over allows them to be used as flat jaws.
[Applications]
· Gripping items strongly and continuously; securing workpieces.- Volume Discount
Standard Price: MYR 492.21- Days to Ship: 9 Day(s) -
Dedicated Fastening Screws for Monoblock, M10 T-Nut
KOPAL
[Specifications]
·A dedicated T-nut for fixing the Mono-Bloc clamp to the table.Standard Price: MYR 52.20- Days to Ship: 4 Day(s) or more -
HARP
[Product Specifications]
· Thickness of table, etc., to which vise can be mounted: up to approx. 44 mm
· Height from table, etc., to which vise is mounted to the top of the vise portion: approx. 76 mm
· Vise portion tilt angle: approx. 60°Standard Price: MYR 1,300.47 Days to Ship: 11 Day(s) -
ESCO
【Product Specifications】
・Jaw width-70mm
・Opening-80mm
・Weight-4.0kg
・Alloy steel- Volume Discount
Standard Price: MYR 2,520.02 Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TAKAGI | MISUMI | NABEYA | NABEYA | LOBTEX | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | HOZAN | NABEYA | NABEYA | NABEYA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | NIHONAUTOMATIC | NIHONAUTOMATIC | TRAD | BESSEY | BESSEY | BESSEY | GISUKE | RIKEN KEISOKUKI | KTC(KYOTO TOOL) | TRUSCO NAKAYAMA | SIGNET | TOP | GRIPONTOOLS | GRIPONTOOLS | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | SUPER TOOL | SUPER TOOL | SUPER TOOL | SUPER TOOL | ENGINEER | KOPAL | HARP | ESCO |
| Product Series | Parallel Block for Vises - Plain Model【2 Pieces Per Package】 | Precision vise (wrench tightening type) lifting prevention structure type | Uni Clamp, Independent Type, Part (Main Body and Independent Metal Washer Set) | ||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 9 Day(s) | 12 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 11 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 6 Day(s) or more | 9 Day(s) or more | 10 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 11 Day(s) | 5 Day(s) or more |
Loading...
Configure
Narrow search by specifying Manufacturer
-
- TRUSCO NAKAYAMA (159)
- NABEYA (108)
- ESCO (55)
- SUPER TOOL (26)
- BESSEY (22)
- GRIPONTOOLS (22)
- TAKAGI (14)
- MITSUTOMO (13)
- ARC GREATTOOL (11)
- MURATEC_KDS (9)
- KTC(KYOTO TOOL) (9)
- SMATO (9)
- NIHONAUTOMATIC (8)
- SIGNET (8)
- SK 11 (8)
- E VALUE (6)
- KOPAL (6)
- LOBTEX (6)
- SAKAESEIKI (6)
- TRAD (6)
- GISUKE (5)
- KOBAYASHITEKKO (5)
- GREENCROSS (4)
- HARP (4)
- MCC CORPORATION (4)
- HOZAN (3)
- NEW STRONG (3)
- ARC (2)
- AS ONE (2)
- GIGA SELECTION (2)
- BAKUMA (2)
- KITAGAWATEKKO (2)
- MINITOR (2)
- TOP (2)
- WAKAJISHI (1)
- BESTTOOL (1)
- ENGINEER (1)
- GERARDI (1)
- H & H (1)
- KONDOTEC (1)
- RIKEN KEISOKUKI (1)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy