Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Linear Slide Cylinder with Multifunctionality, LCR Series (Part Numbers)

Volume Discount

Contributes to tact up, miniaturization and energy savings of equipment compared to the traditional linear guide cylinder.

Part Number

Configured Part Number is shown.

Product specification
Part Numbers
Catalog

Contributes to increased equipment speed, compactness, and energy saving through weight reduction compared to conventional linear guide cylinders

Pursuing lightweight design: Achieves up to 10% reduction compared to conventional models through thorough weight reduction.
Weight reduction of moving parts enables increased equipment speed, compactness, and energy saving.
Enhanced rigidity: Achieves increased rigidity compared to previous models (LCS) through high stiffness of the linear guide and slide table.

Rear piping port provided as standard (except for ⌀6: diameter 6 mm)

Stopper for stroke adjustment: adjustment range per side 0–5 mm

Shock absorber type stopper absorbs impact at the stroke end

Equipped with mounting holes on 2 surfaces

Normal operation
Slide table, hand, workpiece, piston rod, magnet, cylinder switch, spring

When the cushioning mechanism is operating

Buffer mechanism

Specifications

Items		LCR
Tube inner diameter (mm)		⌀6	⌀8	⌀12	⌀16	⌀20	⌀25
Operation method		Double Acting
Operating fluid		Compressed Air
Maximum operating pressure (MPa)		0.7
Minimum operating pressure (MPa)		0.15 (*1)
Pressure Resistance (MPa)		1.05
Ambient temperature (℃)		-10 to +60 (no freezing)
Connection port diameter	Body Side	M3	M5			Rc 1/8
Connection port diameter	Rear of main body	—	M3			M5	Rc 1/8
Stroke tolerance (mm)		+2.0 0 (Note 2)
Piston Speed (mm/s)		50 to 500 (Note 3)
Cushion		With Rubber Cushion
Lubrication		Not required (When lubrication is needed, use turbine oil class 1 ISOVG32)

Note 1: When using a shock absorber type stopper with ⌀6, the pressure will be 0.2 MPa.
Note 2: When used without a stopper, please note that there is a slight gap between the end plate and the floating bushing.
Note 3: When using the stroke adjustment stopper, please use at 50–200 mm/s.

: 30; 60; 90

Part Number
LCR-6-10
LCR-6-10-P[72,73]
LCR-6-20
LCR-6-20-P[72,73]
LCR-6-30
LCR-6-30-P[72,73]
LCR-6-40
LCR-6-40-P[72,73]
LCR-6-50
LCR-6-50-P[72,73]
LCR-8-10
LCR-8-10-P[72,73]
LCR-8-20
LCR-8-20-P[72,73]
LCR-8-30
LCR-8-30-P[72,73]
LCR-8-40
LCR-8-40-P[72,73]
LCR-8-50
LCR-8-50-P[72,73]
LCR-8-75
LCR-8-75-P[72,73]
LCR-12-10
LCR-12-10-P[72,73]
LCR-12-20
LCR-12-20-P[72,73]
LCR-12-30
LCR-12-30-P[72,73]
LCR-12-40
LCR-12-40-P[72,73]
LCR-12-50
LCR-12-50-P[72,73]
LCR-12-75
LCR-12-75-P[72,73]
LCR-12-100
LCR-12-100-P[72,73]
LCR-16-10
LCR-16-10-P[72,73]
LCR-16-20
LCR-16-20-P[72,73]
LCR-16-30
LCR-16-30-P[72,73]
LCR-16-40
LCR-16-40-P[72,73]
LCR-16-50
LCR-16-50-P[72,73]
LCR-16-75
LCR-16-75-P[72,73]
LCR-16-100
LCR-16-100-P[72,73]
LCR-16-125
LCR-16-125-P[72,73]
LCR-20-10
LCR-20-10-P[72,73]
LCR-20-20
LCR-20-20-P[72,73]
LCR-20-30
LCR-20-30-P[72,73]
LCR-20-40
LCR-20-40-P[72,73]
LCR-20-50
LCR-20-50-P[72,73]
LCR-20-75
LCR-20-75-P[72,73]
LCR-20-75-T2H-D-A1D
LCR-20-75-T2H-D-A2D
LCR-20-100
LCR-20-100-P[72,73]
LCR-20-125
LCR-20-125-P[72,73]
LCR-20-150
LCR-20-150-P[72,73]
LCR-25-10
LCR-25-10-P[72,73]
LCR-25-20
LCR-25-20-P[72,73]
LCR-25-30
LCR-25-30-P[72,73]
LCR-25-40
LCR-25-40-P[72,73]
LCR-25-50
LCR-25-50-P[72,73]
LCR-25-75
LCR-25-75-P[72,73]
LCR-25-100
LCR-25-100-P[72,73]
LCR-25-125
LCR-25-125-P[72,73]
LCR-25-150
LCR-25-150-P[72,73]

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Cylinder I.D. (Ø)	Stroke (mm)	Table Size: Length L (mm)	Stroke (Range) (mm)	Maximum Loading Weight (Range) (kg)	Table Size: Width W (mm)	Table Size Length (Range) (mm)	Table Size Width (Range) (mm)	Table Size Height (Range) (mm)	Table Size: Height H (mm)	Driving Load Tolerance (Vertical) (kg)	Table Surface Treatment	Operating Speed (mm/s)	Allowable Static Moment MA (N•m)	Allowable Static Moment MB (N•m)	Allowable Static Moment MC (N•m)	Pneumatic Fitting Diameter	Specifications	Switch	Stopper	Option	Stroke (mm)	Table size length (mm)	table size width (mm)	table size height	Lead wire length (m)	Number of switches	Stopper Block Material	Plug Included	Stroke adjustment range	Clean Specifications *Table Length Differs From Standard
-	1 Piece(s)		22 Day(s) or more	6	10	58	～30	1.1～5.0	25	50.1～100.0	～25.0	20.1～30.0	21	1.4	[Anodize] Alumite	50～500	1.7	3.5	1.7	M3	Standard type	-	-	-	10	60	25	21mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	6	10	58	～30	1.1～5.0	25	50.1～100.0	～25.0	20.1～30.0	21	1.4	[Anodize] Alumite	50～500	1.7	3.5	1.7	M3	Standard type	-	-	-	10	60	25	21mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	6	20	58	～30	1.1～5.0	25	50.1～100.0	～25.0	20.1～30.0	21	1.4	[Anodize] Alumite	50～500	1.7	3.5	1.7	M3	Standard type	-	-	-	20	60	25	21mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	6	20	58	～30	1.1～5.0	25	50.1～100.0	～25.0	20.1～30.0	21	1.4	[Anodize] Alumite	50～500	1.7	3.5	1.7	M3	Standard type	-	-	-	20	60	25	21mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		16 Day(s) or more	6	30	68	～30	1.1～5.0	25	50.1～100.0	～25.0	20.1～30.0	21	1.4	[Anodize] Alumite	50～500	1.7	3.5	1.7	M3	Standard type	-	-	-	30	70	25	21mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		16 Day(s) or more	6	30	68	～30	1.1～5.0	25	50.1～100.0	～25.0	20.1～30.0	21	1.4	[Anodize] Alumite	50～500	1.7	3.5	1.7	M3	Standard type	-	-	-	30	70	25	21mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	6	40	88	31～50	1.1～5.0	25	50.1～100.0	～25.0	20.1～30.0	21	1.6	[Anodize] Alumite	50～500	10.7	5.6	10.7	M3	Standard type	-	-	-	40	90	25	21mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	6	40	88	31～50	1.1～5.0	25	50.1～100.0	～25.0	20.1～30.0	21	1.6	[Anodize] Alumite	50～500	10.7	5.6	10.7	M3	Standard type	-	-	-	40	90	25	21mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	6	50	98	31～50	1.1～5.0	25	50.1～100.0	～25.0	20.1～30.0	21	1.6	[Anodize] Alumite	50～500	10.7	5.6	10.7	M3	Standard type	-	-	-	50	100	25	21mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	6	50	98	31～50	1.1～5.0	25	50.1～100.0	～25.0	20.1～30.0	21	1.6	[Anodize] Alumite	50～500	10.7	5.6	10.7	M3	Standard type	-	-	-	50	100	25	21mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	8	10	57	～30	1.1～5.0	30	50.1～100.0	25.1～50.0	20.1～30.0	25	1.4	[Anodize] Alumite	50～500	1.7	3.5	1.7	M5	Standard type	-	-	-	10	59	30	25mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	8	10	57	～30	1.1～5.0	30	50.1～100.0	25.1～50.0	20.1～30.0	25	1.4	[Anodize] Alumite	50～500	1.7	3.5	1.7	M5	Standard type	-	-	-	10	59	30	25mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		42 Day(s) or more	8	20	57	～30	1.1～5.0	30	50.1～100.0	25.1～50.0	20.1～30.0	25	1.4	[Anodize] Alumite	50～500	1.7	3.5	1.7	M5	Standard type	-	-	-	20	59	30	25mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		42 Day(s) or more	8	20	57	～30	1.1～5.0	30	50.1～100.0	25.1～50.0	20.1～30.0	25	1.4	[Anodize] Alumite	50～500	1.7	3.5	1.7	M5	Standard type	-	-	-	20	59	30	25mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		16 Day(s) or more	8	30	67	～30	1.1～5.0	30	50.1～100.0	25.1～50.0	20.1～30.0	25	1.4	[Anodize] Alumite	50～500	1.7	3.5	1.7	M5	Standard type	-	-	-	30	69	30	25mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		16 Day(s) or more	8	30	67	～30	1.1～5.0	30	50.1～100.0	25.1～50.0	20.1～30.0	25	1.4	[Anodize] Alumite	50～500	1.7	3.5	1.7	M5	Standard type	-	-	-	30	69	30	25mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	8	40	86	31～50	1.1～5.0	30	50.1～100.0	25.1～50.0	20.1～30.0	25	1.6	[Anodize] Alumite	50～500	10.7	5.6	10.7	M5	Standard type	-	-	-	40	88	30	25mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	8	40	86	31～50	1.1～5.0	30	50.1～100.0	25.1～50.0	20.1～30.0	25	1.6	[Anodize] Alumite	50～500	10.7	5.6	10.7	M5	Standard type	-	-	-	40	88	30	25mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		32 Day(s) or more	8	50	96	31～50	1.1～5.0	30	50.1～100.0	25.1～50.0	20.1～30.0	25	1.6	[Anodize] Alumite	50～500	10.7	5.6	10.7	M5	Standard type	-	-	-	50	98	30	25mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		32 Day(s) or more	8	50	96	31～50	1.1～5.0	30	50.1～100.0	25.1～50.0	20.1～30.0	25	1.6	[Anodize] Alumite	50～500	10.7	5.6	10.7	M5	Standard type	-	-	-	50	98	30	25mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		16 Day(s) or more	8	75	121	51～100	1.1～5.0	30	100.1～150.0	25.1～50.0	20.1～30.0	25	1.6	[Anodize] Alumite	50～500	10.7	5.6	10.7	M5	Standard type	-	-	-	75	123	30	25mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		16 Day(s) or more	8	75	121	51～100	1.1～5.0	30	100.1～150.0	25.1～50.0	20.1～30.0	25	1.6	[Anodize] Alumite	50～500	10.7	5.6	10.7	M5	Standard type	-	-	-	75	123	30	25mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	12	10	79	～30	1.1～5.0	40	50.1～100.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	5.7	9.8	5.7	M5	Standard type	-	-	-	10	82	40	30mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	12	10	79	～30	1.1～5.0	40	50.1～100.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	5.7	9.8	5.7	M5	Standard type	-	-	-	10	82	40	30mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	12	20	79	～30	1.1～5.0	40	50.1～100.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	5.7	9.8	5.7	M5	Standard type	-	-	-	20	82	40	30mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	12	20	79	～30	1.1～5.0	40	50.1～100.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	5.7	9.8	5.7	M5	Standard type	-	-	-	20	82	40	30mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	12	30	79	～30	1.1～5.0	40	50.1～100.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	5.7	9.8	5.7	M5	Standard type	-	-	-	30	82	40	30mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	12	30	79	～30	1.1～5.0	40	50.1～100.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	5.7	9.8	5.7	M5	Standard type	-	-	-	30	82	40	30mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	12	40	89	31～50	1.1～5.0	40	50.1～100.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	5.7	9.8	5.7	M5	Standard type	-	-	-	40	92	40	30mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	12	40	89	31～50	1.1～5.0	40	50.1～100.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	5.7	9.8	5.7	M5	Standard type	-	-	-	40	92	40	30mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		16 Day(s) or more	12	50	99	31～50	1.1～5.0	40	100.1～150.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	5.7	9.8	5.7	M5	Standard type	-	-	-	50	102	40	30mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		16 Day(s) or more	12	50	99	31～50	1.1～5.0	40	100.1～150.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	5.7	9.8	5.7	M5	Standard type	-	-	-	50	102	40	30mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		16 Day(s) or more	12	75	133	51～100	1.1～5.0	40	100.1～150.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	22.2	9.8	22.2	M5	Standard type	-	-	-	75	136	40	30mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		16 Day(s) or more	12	75	133	51～100	1.1～5.0	40	100.1～150.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	22.2	9.8	22.2	M5	Standard type	-	-	-	75	136	40	30mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		92 Day(s) or more	12	100	158	51～100	1.1～5.0	40	150.1～200.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	22.2	9.8	22.2	M5	Standard type	-	-	-	100	161	40	30mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		92 Day(s) or more	12	100	158	51～100	1.1～5.0	40	150.1～200.0	25.1～50.0	20.1～30.0	30	2.8	[Anodize] Alumite	50～500	22.2	9.8	22.2	M5	Standard type	-	-	-	100	161	40	30mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	16	10	83.5	～30	1.1～5.0	50	50.1～100.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	17.8	19.2	17.8	M5	Standard type	-	-	-	10	87	50	38mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	16	10	83.5	～30	1.1～5.0	50	50.1～100.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	17.8	19.2	17.8	M5	Standard type	-	-	-	10	87	50	38mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	16	20	83.5	～30	1.1～5.0	50	50.1～100.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	17.8	19.2	17.8	M5	Standard type	-	-	-	20	87	50	38mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	16	20	83.5	～30	1.1～5.0	50	50.1～100.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	17.8	19.2	17.8	M5	Standard type	-	-	-	20	87	50	38mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	16	30	83.5	～30	1.1～5.0	50	50.1～100.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	17.8	19.2	17.8	M5	Standard type	-	-	-	30	87	50	38mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	16	30	83.5	～30	1.1～5.0	50	50.1～100.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	17.8	19.2	17.8	M5	Standard type	-	-	-	30	87	50	38mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	16	40	93.5	31～50	1.1～5.0	50	50.1～100.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	17.8	19.2	17.8	M5	Standard type	-	-	-	40	97	50	38mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	16	40	93.5	31～50	1.1～5.0	50	50.1～100.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	17.8	19.2	17.8	M5	Standard type	-	-	-	40	97	50	38mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		47 Day(s) or more	16	50	103.5	31～50	1.1～5.0	50	100.1～150.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	17.8	19.2	17.8	M5	Standard type	-	-	-	50	107	50	38mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		47 Day(s) or more	16	50	103.5	31～50	1.1～5.0	50	100.1～150.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	17.8	19.2	17.8	M5	Standard type	-	-	-	50	107	50	38mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		16 Day(s) or more	16	75	145.5	51～100	1.1～5.0	50	100.1～150.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	37.3	19.2	37.3	M5	Standard type	-	-	-	75	149	50	38mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		16 Day(s) or more	16	75	145.5	51～100	1.1～5.0	50	100.1～150.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	37.3	19.2	37.3	M5	Standard type	-	-	-	75	149	50	38mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	16	100	170.5	51～100	1.1～5.0	50	150.1～200.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	37.3	19.2	37.3	M5	Standard type	-	-	-	100	174	50	38mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	16	100	170.5	51～100	1.1～5.0	50	150.1～200.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	37.3	19.2	37.3	M5	Standard type	-	-	-	100	174	50	38mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	16	125	195.5	101～250	1.1～5.0	50	150.1～200.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	37.3	19.2	37.3	M5	Standard type	-	-	-	125	199	50	38mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	16	125	195.5	101～250	1.1～5.0	50	150.1～200.0	25.1～50.0	30.1～40.0	38	4.9	[Anodize] Alumite	50～500	37.3	19.2	37.3	M5	Standard type	-	-	-	125	199	50	38mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	20	10	95.5	～30	5.1～10.0	54	50.1～100.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	31.1	37.6	31.1	Rc1/8	Standard type	-	-	-	10	99.5	54	48mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	20	10	95.5	～30	5.1～10.0	54	50.1～100.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	31.1	37.6	31.1	Rc1/8	Standard type	-	-	-	10	99.5	54	48mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	20	20	95.5	～30	5.1～10.0	54	50.1～100.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	31.1	37.6	31.1	Rc1/8	Standard type	-	-	-	20	99.5	54	48mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	20	20	95.5	～30	5.1～10.0	54	50.1～100.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	31.1	37.6	31.1	Rc1/8	Standard type	-	-	-	20	99.5	54	48mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		16 Day(s) or more	20	30	95.5	～30	5.1～10.0	54	50.1～100.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	31.1	37.6	31.1	Rc1/8	Standard type	-	-	-	30	99.5	54	48mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		16 Day(s) or more	20	30	95.5	～30	5.1～10.0	54	50.1～100.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	31.1	37.6	31.1	Rc1/8	Standard type	-	-	-	30	99.5	54	48mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	20	40	105.5	31～50	5.1～10.0	54	100.1～150.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	31.1	37.6	31.1	Rc1/8	Standard type	-	-	-	40	109.5	54	48mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	20	40	105.5	31～50	5.1～10.0	54	100.1～150.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	31.1	37.6	31.1	Rc1/8	Standard type	-	-	-	40	109.5	54	48mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		16 Day(s) or more	20	50	115.5	31～50	5.1～10.0	54	100.1～150.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	31.1	37.6	31.1	Rc1/8	Standard type	-	-	-	50	119.5	54	48mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		16 Day(s) or more	20	50	115.5	31～50	5.1～10.0	54	100.1～150.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	31.1	37.6	31.1	Rc1/8	Standard type	-	-	-	50	119.5	54	48mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		27 Day(s) or more	20	75	152	51～100	5.1～10.0	54	150.1～200.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	56.2	37.6	56.2	Rc1/8	Standard type	-	-	-	75	156	54	48mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		27 Day(s) or more	20	75	152	51～100	5.1～10.0	54	150.1～200.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	56.2	37.6	56.2	Rc1/8	Standard type	-	-	-	75	156	54	48mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
MYR 2,411.48	1 Piece(s)	Available	19 Day(s) or more	20	-	-	51～100	5.1～10.0	-	150.1～200.0	50.1～75.0	40.1～50.0	-	7	-	50～ 500	56.2	37.6	56.2	Rc1/8	Standard type	T2H	A1	Stopper port: Side and bottom surface ports available	75	156	54	48mm	1	Includes 2 pcs.	Steel	Not Included	Not Included	-
MYR 2,411.48	1 Piece(s)	Available	19 Day(s) or more	20	-	-	51～100	5.1～10.0	-	150.1～200.0	50.1～75.0	40.1～50.0	-	7	-	50～ 500	56.2	37.6	56.2	Rc1/8	Standard type	T2H	A2	Stopper port: Side and bottom surface ports available	75	156	54	48mm	1	Includes 2 pcs.	Steel	Not Included	Not Included	-
-	1 Piece(s)		55 Day(s) or more	20	100	177	51～100	5.1～10.0	54	150.1～200.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	56.2	37.6	56.2	Rc1/8	Standard type	-	-	-	100	181	54	48mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		55 Day(s) or more	20	100	177	51～100	5.1～10.0	54	150.1～200.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	56.2	37.6	56.2	Rc1/8	Standard type	-	-	-	100	181	54	48mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	20	125	202	101～250	5.1～10.0	54	200.1～300.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	56.2	37.6	56.2	Rc1/8	Standard type	-	-	-	125	206	54	48mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	20	125	202	101～250	5.1～10.0	54	200.1～300.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	56.2	37.6	56.2	Rc1/8	Standard type	-	-	-	125	206	54	48mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	20	150	227	101～250	5.1～10.0	54	200.1～300.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	56.2	37.6	56.2	Rc1/8	Standard type	-	-	-	150	231	54	48mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	20	150	227	101～250	5.1～10.0	54	200.1～300.0	50.1～75.0	40.1～50.0	48	7	[Anodize] Alumite	50～500	56.2	37.6	56.2	Rc1/8	Standard type	-	-	-	150	231	54	48mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		16 Day(s) or more	25	10	107.5	～30	10.1～20.0	72	100.1～150.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	65.1	116.3	65.1	Rc1/8	Standard type	-	-	-	10	111.5	72	60mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		16 Day(s) or more	25	10	107.5	～30	10.1～20.0	72	100.1～150.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	65.1	116.3	65.1	Rc1/8	Standard type	-	-	-	10	111.5	72	60mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	25	20	107.5	～30	10.1～20.0	72	100.1～150.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	65.1	116.3	65.1	Rc1/8	Standard type	-	-	-	20	111.5	72	60mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	25	20	107.5	～30	10.1～20.0	72	100.1～150.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	65.1	116.3	65.1	Rc1/8	Standard type	-	-	-	20	111.5	72	60mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	25	30	107.5	～30	10.1～20.0	72	100.1～150.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	65.1	116.3	65.1	Rc1/8	Standard type	-	-	-	30	111.5	72	60mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	25	30	107.5	～30	10.1～20.0	72	100.1～150.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	65.1	116.3	65.1	Rc1/8	Standard type	-	-	-	30	111.5	72	60mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	25	40	117.5	31～50	10.1～20.0	72	100.1～150.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	65.1	116.3	65.1	Rc1/8	Standard type	-	-	-	40	121.5	72	60mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	25	40	117.5	31～50	10.1～20.0	72	100.1～150.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	65.1	116.3	65.1	Rc1/8	Standard type	-	-	-	40	121.5	72	60mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	25	50	127.5	31～50	10.1～20.0	72	100.1～150.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	65.1	116.3	65.1	Rc1/8	Standard type	-	-	-	50	131.5	72	60mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	25	50	127.5	31～50	10.1～20.0	72	100.1～150.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	65.1	116.3	65.1	Rc1/8	Standard type	-	-	-	50	131.5	72	60mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	25	75	173	51～100	10.1～20.0	72	150.1～200.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	127.5	116.3	127.5	Rc1/8	Standard type	-	-	-	75	177	72	60mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	25	75	173	51～100	10.1～20.0	72	150.1～200.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	127.5	116.3	127.5	Rc1/8	Standard type	-	-	-	75	177	72	60mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	25	100	198	51～100	10.1～20.0	72	200.1～300.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	127.5	116.3	127.5	Rc1/8	Standard type	-	-	-	100	202	72	60mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	25	100	198	51～100	10.1～20.0	72	200.1～300.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	127.5	116.3	127.5	Rc1/8	Standard type	-	-	-	100	202	72	60mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	25	125	223	101～250	10.1～20.0	72	200.1～300.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	127.5	116.3	127.5	Rc1/8	Standard type	-	-	-	125	227	72	60mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	25	125	223	101～250	10.1～20.0	72	200.1～300.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	127.5	116.3	127.5	Rc1/8	Standard type	-	-	-	125	227	72	60mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping
-	1 Piece(s)		22 Day(s) or more	25	150	248	101～250	10.1～20.0	72	200.1～300.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	127.5	116.3	127.5	Rc1/8	Standard type	-	-	-	150	252	72	60mm	-	-	-	-	-	No (Standard)
-	1 Piece(s)		22 Day(s) or more	25	150	248	101～250	10.1～20.0	72	200.1～300.0	50.1～75.0	50.1～75.0	60	13.1	[Anodize] Alumite	50～500	127.5	116.3	127.5	Rc1/8	Standard type	-	-	-	150	252	72	60mm	-	-	-	-	-	Exhaust Treatment / Vacuum Sweeping

Product TOP

Basic Information

Type	Linear Slide Cylinder	Table Material	Aluminum Alloy	Guide Type	Linear Guide
Environment	General Purpose	Max. Operating Pressure(MPa)	0.7	Min. Operating Pressure(MPa)	0.15
Table Surface Treatment	Anodizing

Configure

196 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Cylinder I.D.(Ø)
6

8

12

16

20

25
Clear
Stroke(mm)
10

20

30

40

50

75

100

125

150
Clear
Table Size: Length L(mm)
57

58

67

68

79

83.5

86

88

89

93.5

95.5

96

98

99

103.5

105.5

107.5

115.5

117.5

121

127.5

133

145.5

152

158

170.5

173

177

195.5

198

202

223

227

248
Clear
Stroke (Range)(mm)
～30

31～50

51～100

101～250
Clear
Maximum Loading Weight (Range)(kg)
1.1～5.0

5.1～10.0

10.1～20.0
Clear
Table Size: Width W(mm)
25

30

40

50

54

72
Clear
Table Size Length (Range)(mm)
50.1～100.0

100.1～150.0

150.1～200.0

200.1～300.0
Clear
Table Size Width (Range)(mm)
～25.0

25.1～50.0

50.1～75.0
Clear
Table Size Height (Range)(mm)
20.1～30.0

30.1～40.0

40.1～50.0

50.1～75.0
Clear
Table Size: Height H(mm)
21

25

30

38

48

60
Clear
Driving Load Tolerance (Vertical)(kg)
1.4

1.6

2.8

4.9

7

13.1
Clear
Table Surface Treatment
- Anodize
  - Alumite
Clear
Specifications
Fall Prevention type

Low-speed type

Standard type
Clear
Switch
T2H

A
Clear
Stopper
- A1
- A2
Clear
Option
- Stopper port: Side and bottom surface ports available
Clear
Stroke(mm)
10

20

30

40

50

75

100

125

150
Clear
Table size length(mm)
59

60

69

70

82

87

88

90

92

97

98

99.5

100

102

107

109.5

111.5

119.5

121.5

123

131.5

136

149

156

161

174

177

181

199

202

206

227

231

252
Clear
table size width(mm)
25

30

40

50

54

72
Clear
table size height
- 21mm
- 25mm
- 30mm
- 38mm
- 48mm
- 60mm
Clear
Lead wire length(m)
- 1
Clear
Number of switches
- Includes 2 pcs.
Clear
Stopper Block Material
- Steel
Clear
Plug Included
- Not Included
Clear
Stroke adjustment range
- Not Included
Clear
Clean Specifications *Table Length Differs From Standard
Exhaust Treatment

No (Standard)

Vacuum Sweeping
Clear
type
- LCR
- LCR-F
- LCR-Q
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

16 Day(s) or Less

17 Day(s) or Less

19 Day(s) or Less

22 Day(s) or Less

23 Day(s) or Less

24 Day(s) or Less

27 Day(s) or Less

32 Day(s) or Less

42 Day(s) or Less

47 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Linear Slide Cylinder LCG Series with Complex Function
CKD

Days to Ship : 15 Day(s) or more
Super Rodless Cylinder SRL3 Series
CKD

Days to Ship : 14 Day(s) or more
Rodless, Magnet Type, Super Rodless Cylinder, MRL2 Series
CKD

Days to Ship : 16 Day(s) or more
Table Type Rotary Actuator GRC/GRC-K Series
CKD

Days to Ship : 15 Day(s) or more
Cylinder Switch, F Series
CKD

Standard Price : MYR 89.72-

Days to Ship : 5 Day(s) or more
Linear Slide Cylinder LCM Series with Complex Function
CKD

Days to Ship : 13 Day(s) or more
Space-Saving Small size Compact Cylinder, MSDG Series
CKD

Days to Ship : 25 Day(s) or more
[NEW]Linear Slide CylinderLCW Series
CKD

Days to Ship : 17 Day(s) or more
Centering Hand, BHE Series
CKD

Days to Ship : 21 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Linear Slide Cylinder with Multifunctionality, LCR Series (Part Numbers)

Contributes to increased equipment speed, compactness, and energy saving through weight reduction compared to conventional linear guide cylinders

Basic Information

Configure

Specification/Dimensions

Cylinder I.D.(Ø)

Stroke(mm)

Table Size: Length L(mm)

Stroke (Range)(mm)

Maximum Loading Weight (Range)(kg)

Table Size: Width W(mm)

Table Size Length (Range)(mm)

Table Size Width (Range)(mm)

Table Size Height (Range)(mm)

Table Size: Height H(mm)

Driving Load Tolerance (Vertical)(kg)

Table Surface Treatment

Specifications

Switch

Stopper

Option

Stroke(mm)

Table size length(mm)

table size width(mm)

table size height

Lead wire length(m)

Number of switches

Stopper Block Material

Plug Included

Stroke adjustment range

Clean Specifications *Table Length Differs From Standard

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm