Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded (Part Numbers)

[Features]
· Polishing Relief Groove is smaller than the conventional products to avoid a workpiece getting stuck
[ ! ] For Diamond Shapes, a step will be produced at the base of the P dimension.

(i)Caution

Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

Type		[ M ] Material	[ H ] Hardness
ELANA	Round	SCM435	Hardening 35~40HRC
ELAND	Diamond
TELANA	Round	SCM415	Carburized Treated Hardness: 55HRC~ (Depth: 0.7 ~ 0.8) Anti-carburizing on Threads
TELAND	Diamond

Type		[ M ] Material	[ H ] Hardness	[ S ] Surface Treatment
R-LANA	Round	SCM435	35~40HRC (Surface 750HV ~ )	Hard Chrome Plating
R-LAND	Diamond
D-LANA	Round	SKD11 Equivalent	55HRC ~ (Surface 3000HV)	Dicoat^® Treated
D-LAND	Diamond
H-LANA	Round	SKD11 Equivalent	55HRC ~ (Surface 3000HV)	TiCN Treatment
H-LAND	Diamond

Specifications

Part Number		-	P	-	B	-	L

Type	D
ELANA	8	-	P6.0	-	B15	-	L10
ELATA	10	-	P8.8	-	B10

Part Number							P Configurable 0.1mm Increment	B Configurable 1mm Increment	L Selection							ℓ₁	H	R	W	Unit Price
Type					D_h7		P Configurable 0.1mm Increment	B Configurable 1mm Increment	L Selection							ℓ₁	H	R	W	ELANA	ELAND	TELANA	TELAND	R-LANA	R-LAND	D-LANA	D-LAND	H-LANA	H-LAND
Hardened (Round) ELANA (Diamond) ELAND	Carburized (Round) TELANA (Diamond) TELAND	Hard Chrome (Round) R-LANA (Diamond) R-LAND	Dicoat (Round) D-LANA (Diamond) D-LAND	TiCN (Round) H-LANA (Diamond) H-LAND	6	0 -0.012	3.0~7.0	[ ! ] 2~30 (B≤P×4)	5	8	10					6	9	1	1~2
					8	0 -0.015	3.0~9.0		5	8	10	12	15			10	11	1.5	1~2
					10		4.5~12.0		(5)	(8)	10	12	15			12	13	2	1~3
					10T		4.5~12.0		(5)	(8)	10	12	15			18	13	2	1~3
					12	0 -0.018	9.0~13.0			(8)	10	12	15	18		15	15	3	4
					16	0 -0.018	13.0~16.0				(10)	12	15	18	20	18	19	4	5

[ ! ] W Dimension D6, D8: W=2 when P>5.0 D10, 10T: W=1 when P<5.0, W=2 when 5.0≤P≤7.0, W=3 when P>7.0 [ NG ] L dimension in ( ) is not applicable to Diamond Shape, Dicoat^® and TiCN treatment.
[ ! ] B Dimension 5 mm ~ will be selected for Dicoat^® Treated / TiCN Treated items.

Alterations

Alterations
Code

Alteration Details

Application Conditions

Ordering Example

Wear Groove Alterations

Drill 4 grooves at B Dimension. The wear and tear of the grooves indicate the degree of wears.
Groove Depth: 0.2 mm (±0.05 mm)
Groove Shape: V Groove (90°)

[ ! ] Applicable to Hardening, Carburized and Round Shape Products only
[ ! ] Applicable when B ≥ 4

[ ! ] When used together with RTC, the groove starts from the area of R value + 1 mm.

ELANA8-P6.0-B15-L10-MK

Flat Position

Ordering Code: KC

[ ! ] Applicable to Diamond Shape Type only.
[ ! ] Changes the flat position to 90° from the standard position 0°.

ELAND8-P6.5-B10-L8-KC

Flat Machining

Ordering Code: KD

[ ! ] Applicable to Round Shape Type only.
[ ! ] Machining on one side.
[ ! ]H-P ≥ 2

TELANA10-P8.8-B10-L10-KD

Wrench Flats

Ordering Code: SC
Adds wrench flats.

H	9	11	13	15	19
H1	7	8	11	13	17

[ ! ] Applicable to Round Shape Type only.

R-LANA8-P6.5-B10-L10-SC

Thread Dia.

Ordering Code: MC8
Changes the thread diameter.

[ ! ] Applicable to Threaded Type only.
[ ! ] D/3 ≤ M < D, Mmin3

TELANA10-P8.8-B10-L10-MC8

Thread Length

Ordering Code: FC15
Changes the thread length.

FC = 1 mm Increment
D6~10:M ≤ FC ≤ Mx3
D12, 16:M ≤ FC ≤ Mx2.5
D20: M ≤ FC ≤ Mx2
[ ! ] Applicable to Threaded Type only.
[NG] Not applicable to Dicoat and TiCN treatment

TELANA10-P8.8-B10-L10-FC15

RTC

Upper Relief Radius Change

Ordering Code: RTC1
Changes the relief to the following radius R.
Selection: R1, R2, R3

[ ! ]RTC ≤ (H-P)/2
[ ! ] Applicable when B ≥ 5

ELANA10-P8.8-B10-L10-RTC1

Tip Angle Change

Ordering Code: RC60
Changes the tip angle.
Selection 60° ,90° ,120°

－

ELANA6-P8.0-B14-L5-RC60

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
D-LANA6-P[3-7/0.1]-B[5-30/1]-L[5,8,10]
D-LANA8-P[3-10/0.1]-B[5-30/1]-L[5,8,10,12,15]
D-LANA10-P[4.5-12/0.1]-B[5-30/1]-L[10,12,15]
D-LANA10T-P[4.5-12/0.1]-B[5-30/1]-L[10,12,15]
D-LANA12-P[9-13/0.1]-B[5-30/1]-L[10,12,15,18]
D-LANA16-P[13-18/0.1]-B[5-30/1]-L[12,15,18,20]
D-LAND6-P[3-8/0.1]-B[5-30/1]-L[5,8,10]
D-LAND8-P[3-10/0.1]-B[5-30/1]-L[5,8,10,12,15]
D-LAND10-P[4.5-12/0.1]-B[5-30/1]-L[10,12,15]
D-LAND10T-P[4.5-12/0.1]-B[5-30/1]-L[10,12,15]
D-LAND12-P[9-13/0.1]-B[5-30/1]-L[10,12,15,18]
D-LAND16-P[13-18/0.1]-B[5-30/1]-L[12,15,18,20]
ELANA6-P[3-7/0.1]-B[2-30/1]-L[5,8,10]
ELANA8-P[3-10/0.1]-B[2-30/1]-L[5,8,10,12,15]
ELANA10-P[4.5-12/0.1]-B[2-30/1]-L[5,8,10,12,15]
ELANA10T-P[4.5-12/0.1]-B[2-30/1]-L[5,8,10,12,15]
ELANA12-P[9-13/0.1]-B[2-30/1]-L[8,10,12,15,18]
ELANA16-P[13-18/0.1]-B[2-30/1]-L[10,12,15,18,20]
ELAND6-P[3-7/0.1]-B[2-30/1]-L[5,8,10]
ELAND8-P[3-10/0.1]-B[2-30/1]-L[5,8,10,12,15]
ELAND10-P[4.5-12/0.1]-B[2-30/1]-L[10,12,15]
ELAND10T-P[4.5-12/0.1]-B[2-30/1]-L[10,12,15]
ELAND12-P[9-14/0.1]-B[2-30/1]-L[10,12,15,18]
ELAND16-P[13-18/0.1]-B[2-30/1]-L[12,15,18,20]
H-LANA6-P[3-8/0.1]-B[5-30/1]-L[5,8,10]
H-LANA8-P[3-10/0.1]-B[5-30/1]-L[5,8,10,12,15]
H-LANA10-P[4.5-12/0.1]-B[5-30/1]-L[10,12,15]
H-LANA10T-P[4.5-12/0.1]-B[5-30/1]-L[10,12,15]
H-LANA12-P[9-14/0.1]-B[5-30/1]-L[10,12,15,18]
H-LANA16-P[13-18/0.1]-B[5-30/1]-L[12,15,18,20]
H-LAND6-P[3-8/0.1]-B[5-30/1]-L[5,8,10]
H-LAND8-P[3-10/0.1]-B[5-30/1]-L[5,8,10,12,15]
H-LAND10-P[4.5-12/0.1]-B[5-30/1]-L[10,12,15]
H-LAND10T-P[4.5-12/0.1]-B[5-30/1]-L[10,12,15]
H-LAND12-P[9-14/0.1]-B[5-30/1]-L[10,12,15,18]
H-LAND16-P[13-18/0.1]-B[5-30/1]-L[12,15,18,20]
R-LANA6-P[3-8/0.1]-B[2-30/1]-L[5,8,10]
R-LANA8-P[3-10/0.1]-B[2-30/1]-L[5,8,10,12,15]
R-LANA10-P[4.5-12/0.1]-B[2-30/1]-L[5,8,10,12,15]
R-LANA10T-P[4.5-12/0.1]-B[2-30/1]-L[5,8,10,12,15]
R-LANA12-P[9-14/0.1]-B[2-30/1]-L[8,10,12,15,18]
R-LANA16-P[13-18/0.1]-B[2-30/1]-L[10,12,15,18,20]
R-LAND6-P[3-8/0.1]-B[2-30/1]-L[5,8,10]
R-LAND8-P[3-10/0.1]-B[2-30/1]-L[5,8,10,12,15]
R-LAND10-P[4.5-12/0.1]-B[2-30/1]-L[10,12,15]
R-LAND10T-P[4.5-12/0.1]-B[2-30/1]-L[10,12,15]
R-LAND12-P[9-14/0.1]-B[2-30/1]-L[10,12,15,18]
R-LAND16-P[13-18/0.1]-B[2-30/1]-L[12,15,18,20]
TELANA6-P[3-8/0.1]-B[2-30/1]-L[5,8,10]
TELANA8-P[3-10/0.1]-B[2-30/1]-L[5,8,10,12,15]
TELANA10-P[4.5-12/0.1]-B[2-30/1]-L[5,8,10,12,15]
TELANA10T-P[4.5-12/0.1]-B[2-30/1]-L[5,8,10,12,15]
TELANA12-P[9-14/0.1]-B[2-30/1]-L[8,10,12,15,18]
TELANA16-P[13-18/0.1]-B[2-30/1]-L[10,12,15,18,20]
TELAND6-P[3-8/0.1]-B[2-30/1]-L[5,8,10]
TELAND8-P[3-10/0.1]-B[2-30/1]-L[5,8,10,12,15]
TELAND10-P[4.5-12/0.1]-B[2-30/1]-L[10,12,15]
TELAND10T-P[4.5-12/0.1]-B[2-30/1]-L[10,12,15]
TELAND12-P[9-14/0.1]-B[2-30/1]-L[10,12,15,18]
TELAND16-P[13-18/0.1]-B[2-30/1]-L[12,15,18,20]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Insertion Guide Tip Shape	Insertion Guide Outer Dia. P (Ø)	Mounting Side Outer Dia. D (Ø)	Material	Heat Treatment	Concentricity	Surface Treatment	L (mm)	Positioning Part Length B (mm)
-	1 Piece(s)	6 Day(s) or more	10	Round	3 ～ 7	6	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	Dicoat Treated	5 ～ 10	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	Round	3 ～ 10	8	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	Dicoat Treated	5 ～ 15	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	Round	4.5 ～ 12	10	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	Dicoat Treated	10 ～ 15	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	Round	4.5 ～ 12	10T	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	Dicoat Treated	10 ～ 15	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	Round	9 ～ 13	12	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	Dicoat Treated	10 ～ 18	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	Round	13 ～ 18	16	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	Dicoat Treated	12 ～ 20	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	Diamond	3 ～ 8	6	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	Dicoat Treated	5 ～ 10	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	Diamond	3 ～ 10	8	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	Dicoat Treated	5 ～ 15	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	Diamond	4.5 ～ 12	10	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	Dicoat Treated	10 ～ 15	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	Diamond	4.5 ～ 12	10T	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	Dicoat Treated	10 ～ 15	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	Diamond	9 ～ 13	12	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	Dicoat Treated	10 ～ 18	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	Diamond	13 ～ 18	16	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	Dicoat Treated	12 ～ 20	5 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	3 ～ 7	6	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Not Provided	5 ～ 10	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	3 ～ 10	8	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Not Provided	5 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	4.5 ～ 12	10	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Not Provided	5 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	4.5 ～ 12	10T	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Not Provided	5 ～ 15	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	9 ～ 13	12	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Not Provided	8 ～ 18	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	13 ～ 18	16	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Not Provided	10 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	3 ～ 7	6	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Not Provided	5 ～ 10	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	3 ～ 10	8	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Not Provided	5 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	4.5 ～ 12	10	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Not Provided	10 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	4.5 ～ 12	10T	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Not Provided	10 ～ 15	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	9 ～ 14	12	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Not Provided	10 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	13 ～ 18	16	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Not Provided	12	2 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Round	3 ～ 8	6	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	TiCN Treatment	5 ～ 10	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Round	3 ～ 10	8	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	TiCN Treatment	5 ～ 15	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Round	4.5 ～ 12	10	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	TiCN Treatment	10 ～ 15	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Round	4.5 ～ 12	10T	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	TiCN Treatment	10 ～ 15	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Round	9 ～ 14	12	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	TiCN Treatment	10 ～ 18	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Round	13 ～ 18	16	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	TiCN Treatment	12 ～ 20	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Diamond	3 ～ 8	6	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	TiCN Treatment	5 ～ 10	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Diamond	3 ～ 10	8	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	TiCN Treatment	5 ～ 15	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Diamond	4.5 ～ 12	10	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	TiCN Treatment	10 ～ 15	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Diamond	4.5 ～ 12	10T	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	TiCN Treatment	10 ～ 15	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Diamond	9 ～ 14	12	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	TiCN Treatment	10 ～ 18	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Diamond	13 ～ 18	16	[Steel] SKD11 Equivalent	Directly Quenching	Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)	TiCN Treatment	12 ～ 20	5 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	3 ～ 8	6	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Hard Chrome Plating	5 ～ 10	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	3 ～ 10	8	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Hard Chrome Plating	5 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	4.5 ～ 12	10	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Hard Chrome Plating	5 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	4.5 ～ 12	10T	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Hard Chrome Plating	5 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	9 ～ 14	12	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Hard Chrome Plating	8 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	13 ～ 18	16	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Hard Chrome Plating	10 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	3 ～ 8	6	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Hard Chrome Plating	5 ～ 10	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	3 ～ 10	8	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Hard Chrome Plating	5 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	4.5 ～ 12	10	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Hard Chrome Plating	10 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	4.5 ～ 12	10T	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Hard Chrome Plating	10 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	9 ～ 14	12	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Hard Chrome Plating	10 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	13 ～ 18	16	[Steel] SCM435	Directly Quenching	Standard Grade Ø0.03	Hard Chrome Plating	12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	3 ～ 8	6	[Steel] SCM415	Carburized	Standard Grade Ø0.03	Not Provided	5 ～ 10	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	3 ～ 10	8	[Steel] SCM415	Carburized	Standard Grade Ø0.03	Not Provided	5 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	4.5 ～ 12	10	[Steel] SCM415	Carburized	Standard Grade Ø0.03	Not Provided	5 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	4.5 ～ 12	10T	[Steel] SCM415	Carburized	Standard Grade Ø0.03	Not Provided	5 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	9 ～ 14	12	[Steel] SCM415	Carburized	Standard Grade Ø0.03	Not Provided	8 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Round	13 ～ 18	16	[Steel] SCM415	Carburized	Standard Grade Ø0.03	Not Provided	10 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	3 ～ 8	6	[Steel] SCM415	Carburized	Standard Grade Ø0.03	Not Provided	5 ～ 10	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	3 ～ 10	8	[Steel] SCM415	Carburized	Standard Grade Ø0.03	Not Provided	5 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	4.5 ～ 12	10	[Steel] SCM415	Carburized	Standard Grade Ø0.03	Not Provided	10 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	4.5 ～ 12	10T	[Steel] SCM415	Carburized	Standard Grade Ø0.03	Not Provided	10 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	9 ～ 14	12	[Steel] SCM415	Carburized	Standard Grade Ø0.03	Not Provided	10 ～ 12	2 ～ 30
-	1 Piece(s)	7 Day(s) or more	10	Diamond	13 ～ 18	16	[Steel] SCM415	Carburized	Standard Grade Ø0.03	Not Provided	12	2 ～ 30

Product TOP

Basic Information

Basic Shape	Pin for Fixtures - Shouldered	Insertion Guide Tip Type	Tip R (Shape B)	Mounting Side Shape	Threaded
Insertion Guide Tolerance	Standard Grade 0/-0.05

Configure

60 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Insertion Guide Tip Shape
- Round
- Diamond
Clear
Insertion Guide Outer Dia. P(Ø)
[3-18/0.1Ø Unit(s)]
Clear
Mounting Side Outer Dia. D(Ø)
6

8

10

10T

12

16
Clear
Material
- Steel
  - SKD11 Equivalent
  - SCM415
  - SCM435
Clear
Heat Treatment
- Directly Quenching
- Carburized
Clear
Concentricity
- Standard Grade Ø0.03
- Standard Grade Ø0.05 (Dicoat Treated, TiCN Treated)
Clear
Surface Treatment
- Dicoat Treated
- Hard Chrome Plating
- Not Provided
- TiCN Treatment
Clear
L(mm)
5

8

10

12

15

18

20
Clear
Positioning Part Length B(mm)
[2-30/1mm Unit(s)]
Clear
type
- D-LANA
- D-LAND
- ELANA
- ELAND
- H-LANA
- H-LAND
- R-LANA
- R-LAND
- TELANA
- TELAND
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

7 Day(s) or Less

8 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 949.56- Days to Ship : 6 Day(s) or more
Angles - Resin
MISUMI Days to Ship : -
Bushings for Locating Pins - Copper Alloy, Flanged
MISUMI Days to Ship : 8 Day(s) or more
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Locating Pins for Fixtures - Standard Grade, No Shoulder - Threaded
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures - Tip Shape Selectable, Standard Grade, Shouldered - Threaded
MISUMI

Days to Ship : 6 Day(s) or more
Pivot Pins - Lock Nut with Shoulder
MISUMI

Days to Ship : 2 Day(s) or more
Locating Pins for Fixtures - Standard Grade, Shouldered - Set Screw
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures - Tip Shape Selectable, Standard Grade, No Shoulder - Threaded
MISUMI

Days to Ship : 6 Day(s) or more
V-Shaped Locating Block Sets - Flat Bottom Type
MISUMI

Standard Price : MYR 113.85-

Days to Ship : 1 Day(s) or more
Locating Pins for Fixtures Height Adjusting Pins - Threaded
MISUMI

Days to Ship : 9 Day(s) or more
Pivot Pins - Cotter Pins
MISUMI

Days to Ship : 1 Day(s) or more
V-Shaped Locating Block Sets - Plate Holding Type
MISUMI

Standard Price : MYR 123.29-

Days to Ship : 1 Day(s) or more
Locating Pins for Fixtures - Precision Grade, Shouldered - Threaded
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures - Tip Shape Selectable, Standard Grade, Shouldered - Set Screw
MISUMI

Days to Ship : 6 Day(s) or more
Magnets with Holders - Strong Type
MISUMI

Standard Price : MYR 36.26-

Days to Ship : 1 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded (Part Numbers)

(i)Caution

Specifications

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Insertion Guide Tip Shape

Insertion Guide Outer Dia. P(Ø)

Mounting Side Outer Dia. D(Ø)

Material

Heat Treatment

Concentricity

Surface Treatment

L(mm)

Positioning Part Length B(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm