(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Material Plates（Page2）
Aside from resin plates, resin processed products such as resin rods, resin pipes, resin washers/collars, and resin bolts are available.
| Days to Ship |
|
|---|
-
TOMBO No.9001 NAFLON PTFE Tape
NICHIAS
· A fluororesin (PTFE) tape.
· Recommended for motors and insulating materials used at high temperatures thanks to its excellent electric properties, non-adhesiveness, and low coefficient of friction.Standard Price: MYR 114.65- Days to Ship: 6 Day(s) or more -
Acrylic Cast Sheet (TS Sheet), Transparent / Milky White Semi-Transparent
HIKARI
Uses an acrylic plate manufactured by Sumitomo Chemical Co., Ltd. (Plate thickness: 2 mm, 3 mm and 5 mm). Available in plate size: approx. 3 ft × 6 ft.
*Quantity: Available in single or multiple quantities.
[Features]
· This material has the highest transparency of known plastic materials.
· Lighter than glass with the same transparency and surface gloss.
· One of the few plastics that can withstand severe conditions such as outdoor use and lighting.
· Optimal for machining such as drilling, cutting, engraving, and printing, etc.- Volume Discount
Standard Price: MYR 35.33- Days to Ship: 7 Day(s) or more -
HIKARI
Uses an acrylic plate manufactured by Sumitomo Chemical Co., Ltd. (Plate thickness: 2 mm, 3 mm and 5 mm). Available in plate size: 3 ft × 6 ft.
*Quantity: Available in single or multiple quantities.
[Features]
· This material has the highest transparency of known plastic materials.
· Lighter than glass with the same transparency and surface gloss.
· One of the few plastics that can withstand severe conditions such as outdoor use and lighting.
· Optimal for machining such as drilling, cutting, engraving, and printing, etc.
· Although this material is resistant to the effects of alcohol-based chemicals, the penetration of adhesive processing related solvents (adhesive solutions) differs to that of the extruded plate. Therefore, caution is necessary.- Volume Discount
Standard Price: MYR 68.44 Days to Ship: 8 Day(s) -
ACRYSUNDAY
· Sunday Sheet has a higher shock strength than acrylic resin, etc.
· Not only machining such as cutting and drilling but also heat processing such as bending and adhesive processing are possible.
· This can also be used as a decorative illumination member and construction material thanks to its self-extinguishing property.
· The Japanese paper model has durability thanks to laminating the Japanese paper of a flying dragon pattern with vinyl chloride resin.Standard Price: MYR 176.90 Days to Ship: 9 Day(s) -
MISUMI
PBT plates have excellent insulation properties, machined properties, low water supply properties, and long-term thermal stability, so they are used in automotive electrical components, etc.
Days to Ship: 8 Day(s) or more -
![[Clean & Pack]PEEK Plates](//my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311033829_002.jpg?$product_view_b$)
MISUMI
Two types of cleaning methods are available: "degreasing" and "precision cleaning." They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.Cleaning Method Product Part Number Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Use Case Degreasing SL-□□ Anti-rust packing Removal of organic stains General environment Regular assembly process Post battery assembly process Precision cleaning SH-□□ Degassing double packing Removal of organic stains
Removal of contamination and dustsClean environment
(Class 10 to 1,000)Battery assembly process LCD-related post assembly process In-vehicle camera assembly process
[Features]·PEEK is a super Engineered Plastic with high heat and chemical resistance.Days to Ship: 6 Day(s) or more -
Standard Price: MYR 3,264.27- Days to Ship: 20 Day(s) or more -
POLYPENCO_JAPAN
Nylon 6 resin plate produced by cast molding.
[Features]
・ This is a basic grade of MC nylon with improved mechanical strength, thermal properties, chemical properties, and abrasion-resistance compared to general 6 nylon.
・ Possible to mold large materials (1,000 × 2,000 mm for plates, up to 1,000 mm in diameter for round materials).
・ Has excellent oil and heat resistance and is used for parts used in various environments including food to steel.
・ Continuous operating temperature: 120°C.
・ Excellent self-lubricating properties and can be used in situations where lubricant oil cannot be used.
[Applications]
・ For various parts in general industrial machines, transport machines, food packaging machines, etc.
・ For wheels, gears, sprockets, rollers, bearings, liners, star wheels, guides, pallets.- Volume Discount
Standard Price: MYR 48.98- Days to Ship: 4 Day(s) or more -
POLYPENCO_JAPAN
Duratron® PEI is a material that is extrusion molded from polyetherimide resin. An engineering thermoplastic with a continuous operating temperature of 170°C.
Standard Price: MYR 2,411.38- Days to Ship: 19 Day(s) or more -
POLYPENCO_JAPAN
[Note] For products weighing 30 kg or more, please confirm receiving heavy deliveries.
- Volume Discount
Standard Price: MYR 1,676.24- Days to Ship: 13 Day(s) or more -
POLYPENCO_JAPAN
Duratron® PEI is a material that is extrusion molded from polyetherimide resin. An engineering thermoplastic with a continuous operating temperature of 170°C.
Standard Price: MYR 2,415.56 Days to Ship: 19 Day(s) or more -
HIKARI
Available in four polycarbonate (PC) plate sizes (t = 2 mm, 3 mm). Color: smoky brown and transparent.
*Quantity: Available in single or multiple quantities.- Volume Discount
Standard Price: MYR 85.53- Days to Ship: 8 Day(s)
![[Clean & Pack]PEEK Plates](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311033829_002.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Material |
| Environmental Compliance |
| Grade |
| Color |
| Hole Drilling |
| Finishing Method |
| Length, A Dimension(mm) |
| Width, B Dimension(mm) |
| Plate Thickness, T Dimension(mm) |
| A/B Dimension Tolerance(mm) |
| T Dimension Tolerance(mm) |
| Through Hole, Bolt Nominal Diameter |
| Counterbore Hole, Bolt Nominal Diameter |
| Threaded Insert, Bolt Nominal Diameter |
| A Side Pitch, F Dimension(mm) |
| B Side Pitch, G Dimension(mm) |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NICHIAS | HIKARI | HIKARI | ACRYSUNDAY | MISUMI | MISUMI | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | POLYPENCO_JAPAN | HIKARI |
| Product Series | Acrylic Cast Sheet (TS Sheet), Transparent / Milky White Semi-Transparent | |||||||||||
| CAD |
|
| ||||||||||
| Days to Ship | 6 Day(s) or more | 7 Day(s) or more | 8 Day(s) | 9 Day(s) | 8 Day(s) or more | 6 Day(s) or more | 20 Day(s) or more | 4 Day(s) or more | 19 Day(s) or more | 13 Day(s) or more | 19 Day(s) or more | 8 Day(s) |
| Material | Fluororesin (fluoropolymer, PTFE) | Acrylic | Acrylic | PVC | PBT | Material 2 | MC Nylon | MC Nylon | PEI | PEI | PEI | Polycarbonate |
| Environmental Compliance | - | - | - | - | - | RoHS compliant (10 substances) | - | - | - | - | - | - |
| Grade | Standard | Weather Resistant | Weather Resistant | Standard | Standard | Standard / Conductive / Sliding | Weather Resistant | Standard | Standard | Standard | Standard | Impact Resistant |
| Color | Translucent White | Translucent White / Transparent | White | - | White | Black Color / Gray Color | Black Gray | Blue | Amber | Amber | Light Brown | Natural Brown / Transparent |
| Hole Drilling | No Drilling Alteration | No Drilling Alteration | No Drilling Alteration | No Drilling Alteration | 2 Holes, Horizontal ～ No Drilling Alteration | 2 Holes, Horizontal ～ No Drilling Alteration | No Drilling Alteration | No Drilling Alteration | No Drilling Alteration | No Drilling Alteration | No Drilling Alteration | No Drilling Alteration |
| Finishing Method | - | - | - | - | - | Circular Saw Cutting, Right Angle Assurance / Side Milling, etc. / 6-Sided Milling, etc. / Upper and Lower Side Milling, etc. | - | - | - | - | - | - |
| Length, A Dimension(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Width, B Dimension(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Plate Thickness, T Dimension(mm) | - | - | - | - | - | 5 ～ 40 | - | - | - | - | - | - |
| A/B Dimension Tolerance(mm) | - | - | - | - | - | －0.2 to 0 / －0.5 to 0 / 0 to ＋0.2 | - | - | - | - | - | - |
| T Dimension Tolerance(mm) | - | - | - | - | - | 0 to ＋0.2 / ±0.10 | - | - | - | - | - | - |
| Through Hole, Bolt Nominal Diameter | - | - | - | - | - | 3 ～ 10 | - | - | - | - | - | - |
| Counterbore Hole, Bolt Nominal Diameter | - | - | - | - | - | 3 ～ 8 | - | - | - | - | - | - |
| Threaded Insert, Bolt Nominal Diameter | - | - | - | - | - | 3 ～ 10 | - | - | - | - | - | - |
| A Side Pitch, F Dimension(mm) | - | - | - | - | - | 6 ～ 241.5 | - | - | - | - | - | - |
| B Side Pitch, G Dimension(mm) | - | - | - | - | - | 4.5 ～ 145.5 | - | - | - | - | - | - |
| Cleaning Method | - | - | - | - | - | Degreasing / Precision Cleaning | - | - | - | - | - | - |
![[Clean & Pack]PEEK Plates](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311033829_002.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Material
-
Environmental Compliance
-
Grade
-
Color
-
Hole Drilling
-
Finishing Method
-
Length, A Dimension(mm)
[20-500/1mm Unit(s)]
-
Width, B Dimension(mm)
[20-500/1mm Unit(s)]
-
Plate Thickness, T Dimension(mm)
-
A/B Dimension Tolerance(mm)
-
T Dimension Tolerance(mm)
-
Through Hole, Bolt Nominal Diameter
-
Counterbore Hole, Bolt Nominal Diameter
-
Threaded Insert, Bolt Nominal Diameter
-
A Side Pitch, F Dimension(mm)
[4.5-495.5/0.5mm Unit(s)]
-
B Side Pitch, G Dimension(mm)
[4.5-495.5/0.5mm Unit(s)]
-
Cleaning Method
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Material Plates
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy