(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
V Belt Pulleys, Idlers
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
NABEYA BI-TECH
"Shaft hole, keyway and push screw machining standardized."
[Features]
· Japan's first standard inch size product.
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Imbalance mass allowance on outer circumference is 0.2% of pulley mass or 3 g, whichever is larger.
· Same accuracy as the balance prescribed in JIS B 1854-1987, "General use V-pulley".* M-type pulleys are exempt.
[Applications]
· Fans, etc.- Volume Discount
Standard Price: MYR 42.61- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
High-speed, high power transmission V-belt pulley that conforms with JIS B 1855.
[Features]
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Enables high speed and high power transmission to make it possible to design a system with a smaller pulley diameter, shorter shaft distance and fewer belts.
· Full lineup. 491 size. 3V: 153 size, 5V: 257 size, 8V: 81 size.
· 230 size has been added into JIS standard 261 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JIS B 1855-1991, "Slim V-pulley").
· Imbalance tolerance on the outer circumference guaranteed to be 0.1% of pulley mass.
[Applications]
· Fans, etc.- Volume Discount
Standard Price: MYR 69.80- Days to Ship: 7 Day(s) or more -
NABEYA BI-TECH
V pulley to international standards. Either general purpose V-belt, or narrow width V-belt can be used.
[Features]
· Consistent production from casting to machining and surface treatment.
· The cell production method allows the production of many kinds of products in low volume, with short lead times.
· Can be attached and removed from shaft / positioned with hex or socket wrench. In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission is achieved.- Volume Discount
Standard Price: MYR 154.25- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
Top-quality pulley, with materials, machining precision and balance accuracy exceeding JIS standards.
[Features]
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Shaft hole, keyway and push screw machining standardized.
· A: 146 size, B: 218 size, C: 212 size, D: 74 size.
· 369 size has been added into JIS standard 281 size separately.
· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Imbalance tolerance on outer circumference is 0.1% of pulley mass.
· Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
[Applications]
· Fans, etc.- Volume Discount
Standard Price: MYR 194.16- Days to Ship: 7 Day(s) or more -
NABEYA BI-TECH
V-belt pulley with high power transmission and large rotation ratio.
[Features]
· High transmission efficiency. ISO 9982 compliant.
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Makes it possible to design a high-transmission efficiency system with a small pulley diameter, short shaft distance and narrow pulley width.
・ Can be attached and removed from shaft and positioned with hex or socket wrench.
· In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission can be achieved.
· Set the imbalance tolerance on the outer circumference to 1 g or 0.1% of the total mass of the pulley and bushing, whichever is larger.
· Balancing is adjusted using a balancing machine.
[Applications]
· Automobiles, manufacturing machinery, air-conditioning equipment, electric tools, household appliances, etc.- Volume Discount
Standard Price: MYR 148.82- Days to Ship: 8 Day(s) or more -
KANEMITSU
Nominal diameter 2 to 24 inches, with 1 to 4 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotator.
[Features]
· A wide range of model configurations: 95 A type, 132 B types and 102 C types, with pitches ranging from 2° to 30° and 1 to 6 grooves.
· High-performance, high-quality NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.
· Dimensional precision to JIS reference standards, with thorough quality control.
· Groove part shape and dimensions table.
· Maximum speed: NS standard V-pulley is recommended to be of circumferential speed under 25 m/s specification.
· Recommended minimum pulley diameter: A type 3° or greater, B type 5° or greater, and C type 8° or greater.Standard Price: MYR 41.31- Days to Ship: 4 Day(s) or more -
NABEYA BI-TECH
Gauge for checking wear of pulley V-groove part. Orders can be made for individual shapes, or as a set for each groove shape. A gap has been provided between the gauge and the outer circumference of the pulley and the bottom of the V-groove. Early replacement is recommended for transmission efficiency.
- Volume Discount
Standard Price: MYR 273.87- Days to Ship: 8 Day(s) or more -
NABEYA BI-TECH
Full lineup of V-belt pulleys that conform to JIS B 1854.
[Features]
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Shaft hole, keyway and push screw machining standardized.
· Extensive product range. 650 size. A: 146 size, B: 218 size, C: 212 size, D: 74 size.
· 369 size has been added into JIS standard 281 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
[Applications]
· Fans, etc.- Volume Discount
Standard Price: MYR 94.84- Days to Ship: 5 Day(s) or more -
KANEMITSU
Nominal diameter 2 to 30 inches, with 1 to 5 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotation.
[Features]
· Extensive range of applications, with high level of model configuration, and safety for quality to satisfy user needs.
· The NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.
· Dimensional precision to JIS reference standards, with thorough quality control.Standard Price: MYR 41.28- Days to Ship: 4 Day(s) or more -
KANEMITSU
Good balance is a benefit of this narrow width V belt pulley with bushing set, requiring no shaft hole, or key machining. Pulley replacement is easy. Shaft hole diameters standardized to both new JIIS / previous JIS. Material exceeds FC200
Standard Price: MYR 577.66- Days to Ship: 7 Day(s) or more -
EVERON
[Features]
· Shaft hole, and keyway processing, etc. become unnecessary, and delivery date management becomes easy
[Applications]
· For speed change by belt conduction.Standard Price: MYR 112.75- Days to Ship: 8 Day(s) -
NABEYA BI-TECH
Full lineup of V-belt pulleys that conform to JIS B 1854.
[Features]
· Consistent production from casting to machining and surface treatment.
· Shaft hole, keyway and push screw machining standardized.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
· Imbalance tolerance on outer circumference is 0.1% of pulley mass.
· Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
[Applications]
· Fans, etc.- Volume Discount
Standard Price: MYR 2,746.24- Days to Ship: 7 Day(s) or more -
NABEYA BI-TECH
Lightweight V-belt pulley made of sheet metal.
[Features]
· Rotation molding method imparts a rigidity suitable for light/moderate load transmission in general industrial machinery.
· Pulley grooves are rounded with no sharp corners to avoid damage to the belt.
· Lightweight, so the entire machine, including base, pillow block, etc., can be made lighter and more compact.
[Applications]
· Fans, etc.- Volume Discount
Standard Price: MYR 56.14- Days to Ship: 7 Day(s) or more -
Engineering Plastic V-Pulley Idler (VIP)
IMAO
[Features]
· Adaptive V-belt M type, A type, B type resin pulley idler.
· Integrated ball bearing- Volume Discount
Standard Price: MYR 66.73- Days to Ship: 9 Day(s) or more -
NABEYA BI-TECH
Safe and reliable fastening system. Responding to a design change is easy.
- Volume Discount
Standard Price: MYR 83.69- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
Fine rotation ratio adjustment. Simple structure, precision machining. No rattling due to micro vibrations / shock loads.
- Volume Discount
Standard Price: MYR 253.92- Days to Ship: 8 Day(s) or more -
KANEMITSU
Nominal diameter 4 to 30 inches, with 2 to 6 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable on high-speed rotator.
Standard Price: MYR 156.31- Days to Ship: 7 Day(s) or more -
KANEMITSU
Nominal diameter ø67 to 710, with 1 to 3 runners available in wide selection, good balance measurements, and directly usable on high speed rotator.
[Features]
· SNS JIS V pulley is a new addition to the mechanical series, with 360 types standardized, rotation ratio, distance between shafts etc. can be freely selected.
· Ingenuity has been applied to the shape design etc. to prevent damage to the shaft or bearing.
· Shaft etc. can be preserved, useful for saving labor.
· Can also be used for machines with heavy loads and shocks etc.
· High-precision machining, for good transmission efficiency, and regular rotation ration is achieved.
· As the SNS and JIS V-pulleys, on all balancing machine products, machine using aligned balance measurements, they have good quality high-precision and are directly usable on high-speed rotators.Standard Price: MYR 67.31- Days to Ship: 4 Day(s) or more -
KANEMITSU
JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø150 to 1000, groove no. 2 to 10. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (large transmission capacity FC250)
[Features]
· JIS standard sizes in addition to a wide range of intermediate sizing standardized, with free selection of rotation ratio and shaft distance etc., for easy design.
· JIS B 1855 slim V-pulley dimensions adopted for interchangeability.
· Material exceeding FC200 (large transmission capacity FC250) used, with various dimensions displaying 100% performance for high precision, vibration, and balance.
· Compared with previous products (A.B.C.....shape), narrow width V belt (3W, 5V, 8V types), there are many advantages due to the very large transmission capacity of the belt, with high horsepower greatly reducing costs.
· Due to the compactness of the pulley, it can be used for low speed horsepower not possible due to large sizes with conventional products, and it is now possible to change the chain and gear transmission.
· Power sheave has enough strength to withstand.
· Since release, it has been used by many, so can be adopted with confidence.
· Band-power ACE, and power scrum are interchangeable even when used with groove guide wheels, and max wedge belt.Standard Price: MYR 502.37- Days to Ship: 7 Day(s) or more -
KANEMITSU
Good balance is a benefit of this narrow width V belt pulley with bushing set, requiring no shaft hole, or key machining. Pulley replacement is easy. Shaft hole diameters standardized to both new JIIS / previous JIS. Material exceeds FC200
Standard Price: MYR 129.48- Days to Ship: 6 Day(s) or more -
NABEYA BI-TECH
NBK idler has a special seal applied to bearings. No scattering of grease by centrifugal force, or suction of dust. The effective weight of the grease is great, improving durability of the idler.
- Volume Discount
Standard Price: MYR 147.00- Days to Ship: 2 Day(s) or more -
NABEYA BI-TECH
Idler for use for a variety of guides.
- Volume Discount
Standard Price: MYR 199.87- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
[Features]
· Can can be used as an idler for light load wires.
· Material / Finish: SPCC, trivalent chromate treatment- Volume Discount
Standard Price: MYR 133.45- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
Highest quality pulley, with materials together with machining and balance accuracy exceeding JIS standards.
[Features]
● Consistent production from casting to machining and surface treatment.
● The cell production method allows the production of many kinds of products in low volume, with short lead times.
● Shaft hole, keyway, and set screw machining standardized.
● Easy set-up.
● A: 146 size, B: 218 size, C: 212 size, D: 74 size.
● 369 size has been added into JIS standard 281 size separately.
● Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
● Top quality pulley with materials, machining and balance accuracy exceeding JIS standards (JISB1854-1987 "General use V-pulley").
● Imbalance tolerance on the outer circumference is 0.1% of the pulley mass.
● Surface treatment, for improving corrosion resistance is a electrodeposition coating with beautiful finish.
[Material / finishing]
FC200 or higher, painted (NSK Blue)- Volume Discount
Standard Price: MYR 60.01- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
ISOMEC bushing can be used simply by machining a straight hole into the rotating body.
- Volume Discount
Standard Price: MYR 182.90- Days to Ship: 8 Day(s) or more -
NABEYA BI-TECH
ISOMEC bushing can be used simply by connecting a bolt to the rotating body.
- Volume Discount
Standard Price: MYR 254.04- Days to Ship: 8 Day(s) or more -
KANEMITSU
Nominal diameter ø118 to 900, with 1 to 5 runners available in wide selection, good balance measurements, and directly usable on high-speed rotator.
Standard Price: MYR 145.34- Days to Ship: 4 Day(s) or more -
KANEMITSU
JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø67 to 630, groove no. 1 to 6. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (greater transmission capacity FC250)
Standard Price: MYR 89.73- Days to Ship: 7 Day(s) or more -
KANEMITSU
JIS K6372 standard. Pulley does not require shaft hole and keyway machining. Can be use with toothed belt (synchro belt, timing belt). Toothed type H, teeth no. 28 (carbon steel) teeth no. 30 (exceeds FC200 material)
[Features]
· Nominal diameter from 4 to 30 inches, 2 to 6 grooves for rich lineup, and dimensional precision to JIS reference standards, good balance measurements, can be used directly on high-speed rotator.Standard Price: MYR 368.17- Days to Ship: 7 Day(s) or more -
KANEMITSU
JIS K6372 standard. Pulley does not require shaft hole and keyway machining. Can be use with toothed belt (synchro belt, timing belt). Toothed type L. Teeth no. 36 (material: carbon steel), teeth no. 40 (material: exceeds FC200)
Standard Price: MYR 263.85- Days to Ship: 7 Day(s) or more -
Engineering Plastic / V-Idler VME
NABEYA BI-TECH
● Material/finish
· Main body: glass fiber reinforced nylon 66
· Bearing: steel, rubber seal- Volume Discount
Standard Price: MYR 49.11- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | KANEMITSU | NABEYA BI-TECH | NABEYA BI-TECH | KANEMITSU | KANEMITSU | EVERON | NABEYA BI-TECH | NABEYA BI-TECH | IMAO | NABEYA BI-TECH | NABEYA BI-TECH | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | NABEYA BI-TECH |
| Product Series | |||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||
| Days to Ship | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 8 Day(s) | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more |
Loading...
Configure
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to V Belt Pulleys, Idlers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy