(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
WIHA Screwdrivers
| Days to Ship |
|
|---|
-
Flat Head Screwdriver with Cap (SoftFinish ®)
WIHA
[Features]
· With a hex bolster for wrenches.
· The hexagonal blade of this screwdriver passes completely through the handle portion and is received by a strong steel cap, allowing difficult screws to be hit with a hammer.
· The blade is made of high grade chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 178.95 Days to Ship: 4 Day(s) or more -
WIHA
Tightening torque has a ±6% margin of error
[Features]
· 1.0-5.0 Nm Torque Vario and Universal Bit Holder with Phillips, Torx, 10 hex bits and a Torque Setter for a 13-piece set.
· German style tough metallic case includedStandard Price: MYR 1,742.09 Days to Ship: 4 Day(s) or more -
Soft Finish® Torque Screwdriver
WIHA
A Soft Finish® handle Torx Screwdriver. The blade is made of chrome vanadium molybdenum steel. It has been quenched with a chrome plated finish. The tip has undergone Wiha ChromTop processing.
Standard Price: MYR 67.80- Days to Ship: 6 Day(s) or more -
WIHA
The blade is made of chrome vanadium steel. It has been quenched and treated with a black oxide finish. This is a Torx screwdriver with a square, cellulose acetate handle to provide good resistance to shock.
Standard Price: MYR 60.65 Days to Ship: 4 Day(s) or more -
Ball Point Magic Ring Hex Screwdriver (Soft Finish)
WIHA
[Features]
· The tip of the hex ballpoint has a spring steel ring to catch hex screws (patent no. 3151178).
· As it can also be used at a tilt angle of 25°, it can easily insert/remove hex screws in difficult-to-reach deep holes and narrow places.
· Made of chrome vanadium steel.
· Quenched with a Chrome Plated FinishStandard Price: MYR 80.55- Days to Ship: 7 Day(s) or more -
Wooden Handle Penetrating Plus Driver
WIHA
[Features]
· Round blade Phillips screwdriver with a hex bolster to increase tightening torque.
· The blade goes through the wooden portion of the handle.
· Made of chrome vanadium steel.
· It has been quenched with a nickel plated finish.
· Wiha wooden handle screwdriver with a leather cap.Standard Price: MYR 72.55 Days to Ship: 9 Day(s) -
Precision Ball Point Driver (Inch Size)
WIHA
[Features]
· Inch PicoFinish ball point hex screwdriver.
· With rotary cup.
· Maximum Inclination Angle 25°Standard Price: MYR 80.76 Days to Ship: 9 Day(s) -
Precision Ball Point Hex Driver (Pico Finish)
WIHA
[Features]
· PicoFinish ball point screwdriver with soft rubber handle.
· With rotary cup.
· Can be operated with a tilt of up to 25°.
· The blade is made of high grade chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 78.55 Days to Ship: 4 Day(s) or more -
Precision Nut Driver (Inch Size)
WIHA
[Features]
· PicoFinish nut driver with soft rubber handle.
· With rotary cup.
· The blade is made of chrome vanadium molybdenum steel.
· Quenched with a Chrome Plated FinishStandard Price: MYR 110.08 Days to Ship: 9 Day(s) -
ESD Torx® Precision Screwdriver
WIHA
[Features]
· This is a precision ESD Torx® screwdriver.
· Handle has an anti-static function.
· Blade: Chrome vanadium steel, fully quenched, chrome plated finish.
· Handle: Precision handle with rotating cap.
· Surface resistivity 106 to 109 ohms.
· Manufacturing Standard: Manufactured in accordance with IEC 61340-5-1.
· Application: Used to assemble electronic parts sensitive to static electricity.Standard Price: MYR 113.07 Days to Ship: 4 Day(s) or more -
System 6 double headed blade (for torx screws)
WIHA
[Features]
· System 6 double headed blade for Torx screws.
· Made of high-grade chrome vanadium molybdenum steel.
· Fully hardened, with chrome plate finish.
· Tips Treated with Precise Wiha ChromTop ProcessStandard Price: MYR 80.49 Days to Ship: 7 Day(s) or more -
Soft Finish® ESD Screwdriver Set (Set of 5)
WIHA
A 5-piece screwdriver set of Soft Finish® ESD anti-static stubby screwdrivers, including 3 Phillips screwdrivers and 2 flathead screwdrivers.
Standard Price: MYR 419.53 Days to Ship: 4 Day(s) or more -
Soft Finish® ESD Flathead Screwdriver
WIHA
[Features]
· A Soft Finish® ESD anti-static flathead screwdriver.
· Blade: High grade chrome vanadium molybdenum steel, fully quenched, chrome plated finish.
· The tip has undergone Wiha ChromTop processing.
· Handle: WIHA SoftFinish Multi-Component Handle.
· Surface resistivity 106 to 109 ohms.
· Manufacturing Standard: IEC 61340-5-1Standard Price: MYR 64.88- Days to Ship: 6 Day(s) or more -
Soft Finish® Screwdriver Set (Set of 6)
WIHA
[Features]
· 6-piece flathead and Phillips screwdriver set with Wiha SoftFinish handle.
· Round blade is made of high-grade chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· High-Precision Wiha ChromTop Process for Corrosion-Resistant TipStandard Price: MYR 524.26 Days to Ship: 9 Day(s) -
Soft Finish® Flathead Screwdriver
WIHA
[Features]
· Round blade flathead screwdriver.
· Wiha SoftFinish handle.
· The blade is made of high grade chrome vanadium molybdenum steel.
· It has been quenched and chrome plated.
· ChromTop Processed TipStandard Price: MYR 78.55 Days to Ship: 7 Day(s) or more -
WIHA
[Features]
· Made of high-grade chrome vanadium molybdenum steel.
· Fully hardened, with chrome plate finish.
· The tip has undergone Wiha ChromTop processing.
· Designed with easily gripped soft finish handle.
· Suitable for use in narrow spacesStandard Price: MYR 69.10- Days to Ship: 7 Day(s) or more -
Soft Finish® ESD Phillips Screwdriver
WIHA
[Features]
· A Soft Finish® ESD anti-static Phillips screwdriver.
· Blade: High grade chrome vanadium molybdenum steel, fully quenched, chrome plated finish.
· The tip has undergone Wiha ChromTop processing.
· Handle: WIHA SoftFinish Multi-Component Handle.
· Surface resistivity 106 to 109 ohms.
· Manufacturing Standard: IEC 61340-5-1Standard Price: MYR 94.77- Days to Ship: 7 Day(s) or more -
Stubby Phillips Screwdriver, 311SP□
WIHA
[Features]
· Made of high-grade chrome vanadium molybdenum steel.
· Fully hardened, with chrome plate finish.
· The tip has undergone Wiha ChromTop processing.
· Designed with easily gripped soft finish handle.
· Suitable for use in narrow spacesStandard Price: MYR 79.57- Days to Ship: 7 Day(s) or more -
Phillips Screwdriver with Hexagon Bolster (Soft Finish®)
WIHA
[Features]
· Includes a hexagonal bolster for tightening with stronger torque.
· The blade is made of high grade chrome vanadium molybdenum steel.
· After quenching, it has been given a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 209.17 Days to Ship: 4 Day(s) or more -
WIHA
[Features]
· T-handle type nut driver.
· A long screw can also be used due to the depth of the shank interior.
· The blade is made of chrome vanadium steel.
· Quenched with Nickel Plated FinishStandard Price: MYR 97.96- Days to Ship: 4 Day(s) or more -
Nut Screwdriver (Soft Finish®)
WIHA
[Features]
· A Soft Finish handle nut screwdriver.
· A protruding nut screw can also be used due to the depth of the shank interior.
· The blade is made of chrome vanadium steel.
· Quenched with a Chrome Plated FinishStandard Price: MYR 84.71- Days to Ship: 7 Day(s) or more -
Hexagon Screwdriver (Soft Finish®)
WIHA
[Features]
· Hex driver for socket cap screws.
· Made of chrome vanadium steel.
· It has been quenched with a chrome plated finish.
· Multi-component, attached with Soft Finish film cushion grip handleStandard Price: MYR 42.17 Days to Ship: 7 Day(s) or more -
Soft Finish® ESD Torque Screwdriver
WIHA
[Features]
· Blade: High grade chrome vanadium molybdenum steel, fully quenched, chrome plated finish.
· The tip has undergone Wiha ChromTop processing.
· Handle: WIHA SoftFinish Multi-Component Handle.
· Surface resistivity 106 to 109 ohms.
· Manufacturing Standard: IEC 61340-5-1Standard Price: MYR 83.78 Days to Ship: 7 Day(s) or more -
Torx Plus® Screwdriver (Soft Finish®)
WIHA
[Features]
· A Soft Finish handle Torx screwdriver.
· The blade is made of chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 72.90- Days to Ship: 4 Day(s) or more -
Set of Soft Finish® Torx® Screwdriver with Magic Spring
WIHA
Set of 6 Torx® Screwdrivers with Magic Springs
[Features]
· SoftFinish® Handle Specification Fits Perfectly in the Palm of the HandStandard Price: MYR 563.18 Days to Ship: 6 Day(s) or more -
Soft Finish® Torx® Screwdriver with Magic Spring
WIHA
Soft Finish® Handle Torx® Screwdriver with MagicSpring
[Features]
· The blade is made of chrome vanadium steel.
· Fully hardened, with chrome plate finish.
· Since the tip is ChromTop processed, it has a high accuracy, and fits Torx screws exactly.
· Ergonomic multi-component handle specification makes it easy to turn screwsStandard Price: MYR 82.86- Days to Ship: 4 Day(s) or more -
Tamper Proof Torx® Driver (Soft Finish®)
WIHA
[Features]
· Screwdriver for tamper-proof Torx screws for theft and risk prevention (hole on the tip).
· The blade is made of high grade chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 90.36- Days to Ship: 4 Day(s) or more -
Phillips Screwdriver with Cap (SoftFinish ®)
WIHA
[Features]
· With a hex bolster for wrenches.
· Fixed screws can be hit with a hammer and loosened with the hexagonal blade passed through the handle and the strengthened steel cap construction.
· The blade is made of high grade chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 123.03- Days to Ship: 4 Day(s) or more -
Magnetizer (Screwdriver Magnet Magnetizer/Demagnetizer)
WIHA
[Features]
· Can be used for magnetization and demagnetization of steel tools such as screwdrivers and tweezers.
· Box is made of high quality green plastic that is resistant to impacts.
· Size: 52 (W) x 29 (D) x 50 (H) mm.
· Magnetize a tool by inserting it through the slot indicated with a plus (+) marking.
· Demagnetize a tool by gliding it through the slot indicated with a minus (-) marking.
· If not completely demagnetized, repeat one more time.Standard Price: MYR 221.00 Days to Ship: 9 Day(s) -
Soft Finish Cross-Head Screwdriver
WIHA
[Features]
· This is a cross-head screwdriver whose blade tip can slant up to 20°.
· The blade is made of high-grade chromium-vanadium-molybdenum steel.
· Fully quenched, chrome plating finish.
· The blade tip is tempered and polished.Standard Price: MYR 90.58- Days to Ship: 13 Day(s) or more -
Interchangeable Flathead Blade for System 4
WIHA
[Features]
· This is a double-headed flathead interchangeable blade for System 4.
· Made of high-grade chrome vanadium molybdenum steel. Fully quenched. Chrome plating.
· The tip has undergone Chrome Top treatment, a colored coating.Standard Price: MYR 89.17- Days to Ship: 4 Day(s) or more -
Soft Finish Handle For System 6
WIHA
[Features]
· This is a Soft Finish blade length-adjustable handle for System 6.
· The hex blade with a 6-mm shaft can be adjusted to 42–144 mm long using the ball clamp system.
[Applications]
· For assembly work and factories.Standard Price: MYR 195.87 Days to Ship: 8 Day(s) -
Ballpoint/Hex Interchangeable Blade For System 4
WIHA
[Features]
· Interchangeable blade of double-headed ballpoint hex and hex for System 4.
· Made of high-grade chrome vanadium molybdenum steel. Fully quenched. Chrome plating.
· The tip has undergone Chrome Top treatment, a colored coating.Standard Price: MYR 89.15- Days to Ship: 10 Day(s) or more -
Cross-Head/Flathead Interchangeable Blade For System 4
WIHA
[Features]
· Double-headed cross-head/flathead interchangeable blade for System 4.
· Made of high-grade chrome vanadium molybdenum steel. Fully quenched. Chrome plating.
· The tip has undergone Chrome Top treatment, a colored coating.Standard Price: MYR 89.17 Days to Ship: 13 Day(s) or more -
Soft Finish ESD Handle For System 4
WIHA
[Features]
Soft Finish ESD handle for System 4. For electrostatic discharge prevention.
· Blade length can be adjusted up to 18–90 mm.
· Blade replacement can be done quickly and reliably using the ball clamp system.
· 106–109Ω surface resistance rate.Standard Price: MYR 166.38 Days to Ship: 10 Day(s) or more -
WIHA
Blades are easily changed and the protruding length can be adjusted from 18 mm to 93 mm.
Standard Price: MYR 409.74 Days to Ship: 10 Day(s) or more -
Replacement Blade For Torx Fix Key Hex Cap Screw
WIHA
[Features]
· This is a replacement blade for Torx Fix key.
· Compatible with hex cap screw size of up to 1.5–4.0 mm.
· High-grade chromium-vanadium-molybdenum steel, fully quenched. Titanium silver.
· This is for tightening screws that need controlled torque. Exhibits efficacy in narrows places.Standard Price: MYR 48.52 Days to Ship: 13 Day(s) or more -
Replacement Blade For Torx Plus Key And Torx Plus Screw
WIHA
[Features]
· This is a replacement blade for Torx Fix key.
· Compatible with Torx Plus screws up to 6IP–25IP.
· High-grade chromium-vanadium-molybdenum steel, fully quenched. Titanium silver.
· This is for tightening screws that need controlled torque. Exhibits efficacy in narrows places.Standard Price: MYR 48.52 Days to Ship: 13 Day(s) or more -
MicroFinish Through Screwdriver (+)
WIHA
[Features]
· With hex bolster that can be engaged with a spanner. Hard screws can be hammered due to the fact that the hex blade which extends into the handle is received by a sturdy steel cap. Highest-grade screwdriver with a MicroFinish handle that is highly resistant to oil and water. The blade is made of high-grade chromium-vanadium-molybdenum steel and has a chrome plating finish. The tip has undergone Wiha Chrome Top treatment.Standard Price: MYR 133.12- Days to Ship: 10 Day(s) or more -
Wiha Soft Finish Dowel Racket Set
WIHA
[Features]
· The anchor holes of perforated concrete, drywalls, bricks, etc. (max. 650 kg/m3) can be easily opened by driving a hammer in. The ø6-mm screwdriver blade has gradations, so the depth of a hole can be measured while working. The blade and cap part where the hammer is hit are insulated and safe, but they are not IEC60900 insulation-certified tools.Standard Price: MYR 316.44 Days to Ship: 13 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA |
| Product Series | ||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 9 Day(s) | 4 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 13 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 10 Day(s) or more | 13 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 10 Day(s) or more | 13 Day(s) or more |
| Tip standards | Flathead (-) | Combination | Torx | Torx | Ballpoint | Phillips (+) | Ballpoint | Ballpoint | Box | Torx | Torx | Phillips (+)/Flathead(-) | Flathead (-) | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Phillips (+) | Phillips (+) | Phillips (+) | Box | Box | Hexagon | Torx | Torx | Torx | Torx | Torx | Phillips (+) | - | Phillips (+) | Flathead (-) | - | Hexagon | Phillips (+)/Flathead(-) | - | Phillips (+)/Flathead(-) | Hexagon | Torx | Phillips (+) | Phillips (+) |
| Tip size / Phillips (+) | - | No.0 / No.1 / No.2 | - | - | - | No.2 | - | - | - | - | - | No.0 / No.1 / No.2 | - | No.1 / No.2 / No.3 | - | - | No.1 / No.2 | No.2 / No.3 | No.4 | - | - | - | - | - | - | - | - | No.1 / No.2 | - | No.1 / No.2 | - | - | - | No.00 | - | - | - | - | No.1 / No.2 / No.3 | No.2 |
| Tip size / flathead (-) blade width (mm) B1 | 6.5 | - | - | - | - | - | - | - | - | - | - | 3 ～ 4 | 2.5 ～ 5.5 | 4.5 ～ 6.5 | 4 | 4 ～ 8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 ～ 3.5 | - | - | 2 | - | - | - | - | - | - |
| Shaft length L (mm) | 125 | - | 60 ～ 115 | 60 | 100 ～ 150 | 100 | 60 | 50 | 60 | 40 | - | 60 ～ 100 | 75 ～ 125 | 80 ～ 150 | 200 | 25 | 80 ～ 100 | 25 | 200 | 125 ～ 230 | 125 | 75 | 60 | 60 ～ 130 | 80 ～ 130 | 60 ～ 100 | 60 ～ 115 | 80 ～ 100 | - | 80 ～ 100 | - | - | - | - | - | - | 20 | 20 | 80 ～ 150 | 100 |
| Single Product/Set Classification | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Set Product |
| Shaft type | Square | - | Round | Round | Square | Round | Square | Square | Round | Round | Square | Round | Round | Round | Round | Round | Round | Round | Square | Round | Round | Square | Round | Round | Round | Round | Round | Square | - | Round | - | - | - | - | - | - | - | - | Square | - |
| Magnet | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | - | - | - | - | - | - | - | - | NA | NA |
| Shaft through | Available | NA | NA | NA | NA | Available | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | - | - | - | - | - | - | - | - | - | - | Available | NA |
| Bolster | Included | NA | NA | NA | NA | Included | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | Included | NA | NA | NA | NA | NA | NA | NA | NA | Included | - | - | - | - | - | - | - | - | - | - | Included | NA |
| Grip Type | Rubber | Rubber | Rubber | Resin | Rubber | Wooden handle | Rubber | Rubber | Rubber | Rubber | - | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | - | - | - | - | - | - | - | - | - | - | Resin | - |
| Tip size / flathead (-) blade thickness (mm) B2 | 1.2 | - | - | - | - | - | - | - | - | - | - | 0.5 ～ 0.8 | 0.4 ～ 1 | 0.8 ～ 1.2 | 0.8 | 0.8 ～ 1.2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.25 ～ 0.6 | - | - | 0.4 | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | 2 ～ 3 | - | - | 4 ～ 8 | - | - | 2 | - | - | - | - | - | - | - | - | - | - | - | 6 ～ 13 | 4 ～ 17 | 3 | - | - | - | - | - | - | - | - | - | - | 1.3 ～ 4 | - | - | - | 1.5 ～ 2.5 | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | 7/64 | - | 3/32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
-
Tip size / Phillips (+)
-
Tip size / flathead (-) blade width (mm) B1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.0, 1.2, 1.6
- 1.2
- 1.2、1.8、2.3
- 1.2、1.8、2.4、3.0
- 1.3
- 1.35
- 1.4
- 1.4, 2.0, 2.4
- 1.5
- 1.5, 2.0, 3.0
- 1.6
- 1.8
- 1.9
- 1.95
- 2
- 2.1
- 2.3
- 2.4
- 2.5
- 2.5、3.0、4.0
- 2.6
- 2.65
- 3
- 3, 5, 6
- 3.1
- 3.4
- 3.5
- 3.6
- 4
- 4 × 6
- 4.3
- 4.5
- 4.5, 5.5, 7.0
- 4.5、6.0
- 4.7
- 4.9
- 5
- 5.5
- 6
- 6.25
- 6.3
- 6.35
- 6.5
- 7
- 7, 9, 12
- 7.2
- 8
- 8, 9, 10, 12, 14
- 9
- 9, 11
- 9.5
- 10
- 11
- 12
- 13
- 14
- 16
- 18
- 30
- 100
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 80~150
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
-
Shaft type
-
Magnet
-
Shaft through
-
Bolster
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- ESCO (832)
- PB SWISS TOOLS (127)
- VESSEL (91)
- ANEX (68)
- ENGINEER (54)
- WERA (46)
- TRUSCO NAKAYAMA (45)
- WIHA (40)
- KTC(KYOTO TOOL) (38)
- TONE (37)
- HOZAN (29)
- SK 11 (19)
- SUNFLAG (17)
- HIRAI KOGU (16)
- KO-KEN TOOL (15)
- AS ONE (14)
- ARC (9)
- SIGNET (7)
- E VALUE (6)
- BONDHUS (5)
- ARC GREATTOOL (4)
- BESTTOOL (4)
- EIGHT TOOL (4)
- HANDIWORK (4)
- HAZET (3)
- TRAD (3)
- WILLIAMS (3)
- FUJIYA (2)
- Ｍ＆Ｍ (2)
- SMATO (2)
- SUEKAGE TOOL (2)
- TGK (2)
- TOP (2)
- HIOS (1)
- MITOLOY (1)
- TAKAGI (1)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy