(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
SUNGIL Keyless Bushing (Fastening Fittings)
| Days to Ship |
|
|---|
-
Keyless bushing A.P.LOCK SAPL-A Series
SUNGIL
[Features]
·Self-centering function: Prevents fine off-centering
·Small diameter difference between inner diameter (d) and outer diameter (D), low surface pressure allows installation on small hubs
·Inner diameter standardized from ⌀5 to ⌀50
·Simple in concept and easy to assemble
·Stainless steel material (vacuum environment) or electroless nickel plating (corrosion prevention) product can be selected depending on the usage environment.- Volume Discount
Standard Price: MYR 107.04- Days to Ship: 4 Day(s) or more -
Keyless bushing A.P.LOCK SAPC Series
SUNGIL
[Features]
·Aluminum material
At High-Speed Servo Control Positioning, The Moment of Inertia Reduction is an important factor in system performance. The Use of Aluminum A.P.Lock suitable for aluminum pulley enables high-speed use with low inertia.
·Ideal for aluminum pulleys
When driving a servo motor with a timing pulley, there is a slip problem because the conventional friction coupling unit has a high surface pressure and does not fit the hub diameter. However, the SAPC series reduces the number of bolts based on the torque specification of the servo motor, to reduce surface pressure, so that tightening with aluminum pulley is done without any difficulty.
·Finishing structure
Since it is designed to allow the bearing push plate to work, it is not necessary to use a separate bearing push plate.
·Easy positioning of assembly
Conventional power locks require a gap of 1 mm from the counterparts in consideration of disassembly, but the SAPC series has a structure that is easy to disassemble even when there is no hub movement space when disassembled. It is also easy to locate.- Volume Discount
Standard Price: MYR 116.44- Days to Ship: 4 Day(s) or more -
Keyless Bushing A.P.LOCK SAPA Series
SUNGIL
[Features]
·Aluminum material
At High-Speed Servo Control Positioning, The Moment of Inertia Reduction is an important factor in system performance. The Use of Aluminum A.P.Lock suitable for aluminum pulley enables high-speed use with low inertia.
·High torque transmission
Because it uses high-rigidity aluminum alloy to transmit high torque, it can be used not only for aluminum pulleys but also for general steel pulleys.
·Ideal for clean rooms
Electroless nickel plated bolts and aluminum body are used as standard , making it ideal for clean rooms.- Volume Discount
Standard Price: MYR 116.32- Days to Ship: 9 Day(s) or more -
Keyless Bushing A.P.LOCK SAPL-AK Series
SUNGIL
[Features]
·Self-centering function: Prevents minute off-centering.
·The diameter difference between the inner diameter (d) and the outer diameter (D) is small, and the low surface pressure makes it possible to install even small hubs.
·Standardized inner diameter ⌀4.5 to ⌀40.
·Simple in concept and easy to assemble.
·Stainless steel (vacuum environment) or electroless nickel plating (corrosion prevention) products can be selected depending on the operating environment.- Volume Discount
Standard Price: MYR 131.10- Days to Ship: 4 Day(s) or more -
Keyless Bushing A.P.LOCK SAPL-AS Series
SUNGIL
[Features]
·Self-centering function: Prevents minute off-centering.
·The diameter difference between the inner diameter (d) and the outer diameter (D) is small, and the low surface pressure makes it possible to install even small hubs.
·Standardized inner diameter from ⌀4.5 to ⌀40.
·Simple in concept and easy to assemble.
·Stainless steel material (vacuum environment) or electroless nickel plating (corrosion prevention) can be selected depending on the usage environment.- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 328.00- Days to Ship: 9 Day(s) or more -
Keyless Bushing A.P.LOCK SAPL-C Series
SUNGIL
[Features]
· Self-centering Capability: Minimal Off-centering Prevention.
・The difference in diameter between the inner diameter (d) and the outer diameter (D) is small, so that it can be mounted on a small hub with low surface pressure. (A.P. Lock of the most compact design)
·Suitable for Short Hubs.
·Since the inner ring is in close contact with the hub section, the hub does not move during tightening.
·Stainless Steel or Electroless Nickel plated products can be selected depending on the environment.- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 151.00- Days to Ship: 9 Day(s) or more -
Keyless Bushing A.P.LOCK SAPL-CK Series
SUNGIL
[Features]
· Self-centering Capability: Minimal Off-centering Prevention.
・The difference in diameter between the inner diameter (d) and the outer diameter (D) is small, so that it can be mounted on a small hub with low surface pressure. (A.P. Lock of the most compact design)
·Suitable for Short Hubs.
·Since the inner ring is in close contact with the hub section, the hub does not move during tightening.
·Stainless Steel or Electroless Nickel plated products can be selected depending on the environment.- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 179.88- Days to Ship: 9 Day(s) or more -
Keyless bushing A.P.LOCK SAPL-CS Series
SUNGIL
[Features]
· Self-centering Capability: Minimal Off-centering Prevention.
・The difference in diameter between the inner diameter (d) and the outer diameter (D) is small, so that it can be mounted on a small hub with low surface pressure. (A.P. Lock of the most compact design)
·Suitable for Short Hubs.
·Since the inner ring is in close contact with the hub section, the hub does not move during tightening.
·Stainless Steel or Electroless Nickel plated products can be selected depending on the environment.- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 363.19- Days to Ship: 4 Day(s) or more -
Keyless bushing A.P.LOCK SAPL-B Series
SUNGIL
[Features]
· Self-centering Capability: Minimal Off-centering Prevention.
·The outer diameter of the cover is larger than that of the SAPL-A type, and the bolt size is larger, which makes it relatively durable compared to the same inner diameter.- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 141.56- Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Shaft Bore Dia. d(Ø) |
| Hub Dia.(Ø) |
| Body Material |
| Allowable Torque Range(N•m) |
| Centering |
| Surface Treatment |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
| Cleaning Method |
| Use |
| Characteristics/Applications |
| Environmentally friendly |
|
|
|
|
|
|
|
|
| |
| Brand | SUNGIL | SUNGIL | SUNGIL | SUNGIL | SUNGIL | SUNGIL | SUNGIL | SUNGIL | SUNGIL |
| Product Series | |||||||||
| CAD |
|
|
|
|
|
|
|
|
|
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more |
| Type | Flanged | Flanged | Flanged | Flanged | Flanged | Thin Wall | Thin Wall | Thin Wall | Flanged |
| Shaft Bore Dia. d(Ø) | 5 ～ 50 | 8 ～ 35 | 5 ～ 35 | 5 ～ 50 | 5 ～ 40 | 5 ～ 30 | 5 ～ 30 | 5 ～ 30 | 8 ～ 30 |
| Hub Dia.(Ø) | 16 ～ 72 | 19 ～ 56 | 16 ～ 57 | 16 ～ 72 | 16 ～ 62 | 12 ～ 41 | 12 ～ 41 | 12 ～ 41 | 22 ～ 55 |
| Body Material | Steel | Aluminum | Aluminum | Steel | Stainless Steel | Steel | Steel | Stainless Steel | Steel |
| Allowable Torque Range(N•m) | 2.0~20.0 ～ 1000.1~3000.0 | 2.0~20.0 ～ 200.1~300.0 | 2.0~20.0 ～ 500.1~700.0 | 2.0~20.0 ～ 1000.1~3000.0 | 2.0~20.0 ～ 300.1~500.0 | 2.0~20.0 ～ 500.1~700.0 | 2.0~20.0 ～ 500.1~700.0 | 2.0~20.0 ～ 150.1~200.0 | 2.0~20.0 ～ 500.1~700.0 |
| Centering | Provided | None | None | Provided | Provided | Provided | Provided | Provided | Provided |
| Surface Treatment | None | Anodize | Anodize | Electroless Nickel Plating | None | None | Electroless Nickel Plating | None | None |
| Tightening Structure | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type |
| Tightening Method | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) |
| Allowable Torque(N•m) | 7 ～ 1500 | 6 ～ 230 | 6 ～ 576 | 4.6 ～ 1362 | 2.8 ～ 430.6 | 9 ～ 523 | 9 ～ 523 | 3 ～ 168 | 18 ～ 510 |
| Cleaning Method | - | - | - | - | - | - | - | - | - |
| Use | - | - | - | - | - | - | - | - | - |
| Characteristics/Applications | - | - | - | - | - | - | - | - | - |
| Environmentally friendly | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Type
-
-
Straight -
Nut Tightening -
-
Direct Mounting -
Sleeve
-
-
Shaft Bore Dia. d(Ø)
-
Hub Dia.(Ø)
-
Body Material
-
Allowable Torque Range(N•m)
- 2.0~20.0
- 20.1~50.0
- 50.1~70.0
- 70.1~100.0
- 100.1~150.0
- 150.1~200.0
- 200.1~300.0
- 300.1~500.0
- 500.1~700.0
- 700.1~1000.0
- 1000.1~3000.0
- 3000.1~10000.0
- 10000.1~300000.0
-
Centering
-
Surface Treatment
- None
- Black Oxide
- Electroless Nickel Plating
- Anodize
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
-
Cleaning Method
- Degreasing
- Precision Cleaning
-
Use
- General
- For Clean Environments
-
Characteristics/Applications
- Clean washed
-
Environmentally friendly
- RoHS Compliant (10 Substances)
Narrow search by specifying Manufacturer
-
- MISUMI (14)
- ISEL (10)
- SUNGIL (9)
- SXN (6)
- MIKI PULLEY (3)
- KATAYAMA CHAIN (2)
- CAP (1)
- EVERON (1)
CAD
-
- 2D
- 3D
Related Categories to Keyless Bushing (Fastening Fittings)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy