(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
MIRAI INDUSTRY General Purpose Tools (Options, Others)
| Days to Ship |
|
|---|
-
Magnet Finder (High Sensitivity Type) (Magnet Detector)
MIRAI INDUSTRY
[Features]
· The easy-to-see matrix LED lamp and buzzer let you accurately detect the magnet of a slide box and mark the position as a point for opening a hole. (Marking can be made in two ways: stamping and projection.)
· Comes with a level, which is convenient for cutting into boxes and installing instruments.
· With battery-saving feature. The auto power-off function automatically turns off the power after approx. one and a half minutes.
· A unique system eliminates the need for cumbersome sensitivity adjustment.
· The compact body fits in a breast pocket.- Volume Discount
Standard Price: MYR 36.51 Days to Ship: 9 Day(s) or more -
Fire-Resistant Black Fire-Resistant Sheet
MIRAI INDUSTRY
[Features]
· The mesh type slides to let you apply it after fixing the pipes.
· Openings in a hollow wall no longer need to be reinforced.
· Application into through holes in a floor can be done from above the floor.
· The universal fireproofing member can be used in both walls and floors.
· The lightweight material can be carried around with ease.
· Shaped into sheets, which makes it easy to measure and apply specified amounts.
· Expands to at least twice the size when heated to 300°C or higher temperatures, to prevent spreading of fire.
· Less processing is required, and hardly any waste is generated or dust is raised.Standard Price: MYR 49.43- Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· A slim, vertically long twin-compartment resin case that lets you store a knife and a cutter, etc., vertically side by side. (The case sits upright on a belt without taking space to the side.)
· The belt-on case is made of impact-resistant resin and has locks at both the front and rear.- Volume Discount
Standard Price: MYR 119.27- Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· The LED light lets you perform leveling and scribing in darkness.
· The level gauge can be separated from the LED light section. (A standalone LED light is also available.)
· You can also scribe hole centers of panel boxes for an oval hole saw, etc.- Volume Discount
Standard Price: MYR 87.29- Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· Use one of two blades of different lengths according to the location. The blade angle is also freely adjustable.
· Comes with a slip-resistant, easy-to-use rubber grip.
· The case type lets you carry it on your belt, and taking out the saw is easy. (The case is made of impact-resistant resin and also has a lock mechanism.)
· Can be stored in the twin-compartment case for DENKO MAC.- Volume Discount
Standard Price: MYR 56.22- Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· Uses a strong J-type blade specially designed for professional use.
· The metal rail is covered with resin to achieve excellent electrical insulation property.
· Comes with an auto lock mechanism that prevents the blade from returning even when a strong force is applied during work.
· The large grip is perfect for on-site work.
· The case is made of impact-resistant resin and also has a lock mechanism.
· Can be stored in the twin-compartment case for DENKO MAC.- Volume Discount
Standard Price: MYR 49.31- Days to Ship: 9 Day(s) or more -
Hammer Cutter (Plaster Board / Veneer Cutout Knife)
MIRAI INDUSTRY
[Features]
· A perfect knife for making cutouts in plaster boards, veneers, etc.
· You can make cutouts quickly and easily.
· The gun grip is easy to grip.
· The blade length can be adjusted according to the sheet thickness, so damage to the objects in the wall can be prevented.
· The sharp blade tip ensures a very clean cut.
· A replacement blade is set in the main body.- Volume Discount
Standard Price: MYR 90.69- Days to Ship: 9 Day(s) or more -
Boxutter 2, Center Detector (Metal Detector)
MIRAI INDUSTRY
[Features]
· The sensitivity lamp let you tell the sensitivity level just by looking.
・ The level of the sensitivity lamp let you tell the center of the buried object from.
・ Sensitivity is freely adjustable according to the depth of the buried object.
・ The swiveling head is adjustable to an easy-to-use angle according to the wall surface.
・ With a power lamp that clearly tells the remaining battery level.
・ The non-directional round detection surface finds object from any direction.
・ A scriber point is provided at the center of the detection surface.
・ Thin reinforcing bars (9.09 mm), etc., are not detectable, so you can easily tell what the buried objects are (enclosures, pipes, etc.)Standard Price: MYR 1,373.89 Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
You can install a cable hanger (with bolt clip) to a suspension bolt in double-layer ceiling with a single action, and also wire its cables, without using a stepladder.
Standard Price: MYR 166.56 Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· Used for securing Hikari Mold and Plastic Mold to wall surfaces.
· The staples are thinner than nails, which is perfect for thin moldings.
· You can use it like a stapler to drive in staples successively.
· It can also be used as a standard tucker.Standard Price: MYR 21.47- Days to Ship: 3 Day(s) or more -
Portable Sharpening Stone (For DENKO MAC)
MIRAI INDUSTRY
[Features]
· Portable sharpening stone you can carry in your pocket for quick horning.
· Comes with an easy-to-carry plastic base that keeps the whetstone from cracking.
· You can carry it by passing a string through the hole.
· Can also be used for stainless steel blades.
· Use it after wetting.- Volume Discount
Standard Price: MYR 68.04 Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· Use one of two blades of different lengths according to the location. The blade angle is also freely adjustable. (The short type is foldable into a small size, with the blade stored inside the grip.)
· Comes with a slip-resistant, easy-to-use rubber grip.
· The case type lets you carry it on your belt, and taking out the saw is easy. (The case is made of impact-resistant resin and also has a lock mechanism.)
· The tip of the blade is pointed, so slit holes can be made easily.
· The blade of the short type has a pointed tip and a back blade, so slit holes can be made easily and even paper, etc., can be cut. Also, the non-set-type blade can cut along the edges of a box. (Perfect for opening a hole for a switch box.)
· Can be stored in the twin-compartment case for DENKO MAC.- Volume Discount
Standard Price: MYR 56.22- Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· Cuts like a knife. Cuts well and generates no cutting powder.
· Comes with a slip-resistant, easy-to-use rubber grip.
· The case type lets you carry it on your belt, and taking out the saw is easy. (The case is made of impact-resistant resin and also has a lock mechanism.)
· Can be stored in the twin-compartment case for DENKO MAC.- Volume Discount
Standard Price: MYR 96.60- Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Specifications]·MIRAI INDUSTRY CO.,LTD. general-purpose tools (options, others) ·Compatible pipes: Clamp tube, Pakkun flexible tube
- Volume Discount
Standard Price: MYR 38.49- Days to Ship: 9 Day(s) or more -
Scriber Pen (Sharpenable Scriber Pen)
MIRAI INDUSTRY
[Features]
· Even when the lead has deformed, no worries. Simply sharpen it like a pencil.
· Perfect for concrete walls, boards, etc.
· The long lead can be pulled out and sharpened. (KPT-2□ has graduated markings to let you sharpen the lead five times.)
· Toluene- and xylene-free.Standard Price: MYR 25.07- Days to Ship: 9 Day(s) or more -
Fire-Resistant Black Putty Ace G
MIRAI INDUSTRY
[Features]
· Filler material that expands to at least four times the size when heated to 300°C or higher temperatures, to prevent spreading of fire.
· Installation is easy — simply fill Putty Ace G in the opening.
· Set it in a caulking gun and apply. Gaps will be filled evenly and easily.
· Saves you the trouble of cutting and processing using power tools, etc.
· When filling through holes in a floor, the entire work can be performed from above the floor.
· Multiple pipes can be placed in one opening, which increases work efficiency and also reduces cost.
· The lightweight material can be carried around with ease.
· The water-resistant putty does not drop in performance even when wet.Standard Price: MYR 183.47 Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· Simply install it on a ceiling joist. You can use a magnet detector to easily find where a down light hole should be made.
· The installation position (hole position) can be set freely.
· Reusable.- Volume Discount
Standard Price: MYR 27.58 Days to Ship: 9 Day(s) or more -
Deck Drill Bit (NOSS-Type Drill)
MIRAI INDUSTRY
[Features]
· Use it to drill holes (ø13 mm) in deck plates.
· The shank diameter is ø9.5 mm, so a small power drill will do.
· The shank has V-grooves to prevent slipping.
· Comes with a protective ring that protects the chucks of the power drill.Standard Price: MYR 327.49 Days to Ship: 9 Day(s) or more -
DENKO Scale (150MM Straight Ruler With Wire / Pipe Sizes)
MIRAI INDUSTRY
[Features]
· 150‑mm straight ruler with size graduations for IV lines and VE pipes (similar to thick steel conduit pipes / CD pipes).
· The JIS Class 1-compliant scale (stainless steel with silver finish) is strong and durable.
· Its compact size makes the ruler easy to use and carry in a breast pocket.- Volume Discount
Standard Price: MYR 35.53 Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· Quick-drying universal marker that lets you write on plastic, metal, glass, ceramic, wood, fabric, etc.
· The ink develops a vivid color on any surface, and has excellent water resistance and weather resistance.
· The marker uses a pigment ink resistant to color transfers onto PVC sheets, PVC tiles, etc.- Volume Discount
Standard Price: MYR 34.53 Days to Ship: 9 Day(s) or more -
DENKOMAC (Cable Sleeve Stripping Knife)
MIRAI INDUSTRY
[Features]
DM-12, DM-12H
・ Easy-to-use size with short blade length
・ It uses hard-to-break steel
・ The blade has a scale that is convenient for measuring the VVF coating cut length, etc., and a file groove on one side that can prepare the cut surface of the copper wire
・ The case is made of impact-resistant resin and has a lock mechanism (Excluding no case)
・ Grip with rubber that is hard to slip and easy to use
Excluding DM-12 and DM-12H
・ No need to fold the blade. It can be hung on a belt with the case, and the knife can be taken in and out very smoothly
・ There are 2 types, a rubber grip that is hard to slip and easy to use, and a plastic grip that is strong against impact (The case is made of impact-resistant plastic)
· It uses a special steel that cuts well. There is also a stainless steel blade type that does not rust easily (DM-S1B)Standard Price: MYR 161.73- Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· You can cut CD pipes, PF pipes, moldings and various other objects with ease.
· Comes with a case that can be worn on a belt. Taking out the cutter is easy.
· Impact-resistant resin case. It also has a lock mechanism.
· The blade cuts over its entire length, so it lasts twice as long. When the blade becomes dull, simply flip it 180 degrees and use the other side.
· The sharp stainless steel blade is used.
· Can be stored in the twin-compartment case for DENKO MAC.- Volume Discount
Standard Price: MYR 75.71- Days to Ship: 9 Day(s) or more -
Vinyl Tape Holder (Wire Holder For Suspending Plastic Tape)
MIRAI INDUSTRY
[Features]
· Holder for suspending a plastic tape on a work belt, etc. The plastic tape can be removed/installed easily with one hand.
*Attach it to a work belt, D-ring on a safety harness, etc.- Volume Discount
Standard Price: MYR 64.09 Days to Ship: 9 Day(s) or more -
Bushing Punch (Bushing Press-Fitting Tool For Ceiling Foundation Members)
MIRAI INDUSTRY
[Features]
· Used for installing wiring bushings to ceiling foundation members (double bars).
· Cable-protecting wiring bushing is installed at the same time a hole is punched.
· Wiring bushings do not project from the double bars, so the ceiling material can be installed cleanly.Standard Price: MYR 2.62- Days to Ship: 9 Day(s) or more -
Point Finder (Box Finding Magnet)
MIRAI INDUSTRY
[Specifications]·To be attached to a plaster ring to detect an enclosure.
Standard Price: MYR 4.91- Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
・ Since it is a 2-point detection type that notifies with 2 lamps, it is easy to identify buried objects (enclosures, pipes, steel frames, reinforcing bars, nails), etc.
・ It detects the exact position of any metal (steel, copper, aluminum, lead, etc.) from the surface of the wall
・ Knob type for easy dial (sensitivity) adjustment
・ It comes with a notch gauge for the slide box (Japanese room box). (If you use the attached "SB hole saw drilling centering gauge," you can easily drill a box hole with the SB hole saw)Standard Price: MYR 1,176.38 Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· Magnet detector for detecting magnettype boxes behind walls. (You can roughly tell where the magnet of a magnet-type slide box or slide box fitted with Point Finder is.)
· The compass responds to a magnet and moves in a unique pattern to tell you whether it is a magnet or iron.- Volume Discount
Standard Price: MYR 97.87 Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· Used for binding reinforcing bars together using metal wires (binding wires).
· The super-long type is perfect for thick slabs.- Volume Discount
Standard Price: MYR 64.09 Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· A new hammer that lets you drive in nails easily in places where use of a standard hammer is difficult.
· Eliminates mis-striking and permits speedy nailing action.
· The rubber grip prevents slipping.
· LH-270 has a compact body of just 270 mm in overall length, but its grip extends in two stages to exert superior driving power. Can be stored in a tool box.Standard Price: MYR 489.04 Days to Ship: 9 Day(s) or more -
Only Rib OK (Rib Cutter For M Bars)
MIRAI INDUSTRY
[Features]
· Used for cutting ribs on ceiling foundation members (M bars).
(By cutting off the ribs, you can easily remove or trim the M bars that would otherwise interfere with the opening of down light holes. )
· The compact tool can be used in holes of small openings (ø75).Standard Price: MYR 979.33 Days to Ship: 9 Day(s) or more -
Lever Block (Chain Block With Ratchet Lever)
MIRAI INDUSTRY
[Features]
· The ultra-compact, lightweight body is convenient for carrying around. Easy to use in small and high places.
· Incorporates a nickel-plated chain that is strong and resistant to corrosion/wear.
· The hook latch has a stopper, so there is no need to worry about accidental release.
*We can custom-design blocks of 2 m, 3 m and 4 m in lifting height. (No storage case)Standard Price: MYR 1,629.56 Days to Ship: 9 Day(s) or more -
LGS Stud Punch (Hole Opening Tool For Ceiling Foundation Members)
MIRAI INDUSTRY
[Features]
· You can easily open holes in ceiling/wall foundation members and install dedicated wiring bushings in the holes.Standard Price: MYR 671.36- Days to Ship: 9 Day(s) or more -
Heat Insulation Material Drill Bit (Groove Cutting Bit For Heat Insulation Materials)
MIRAI INDUSTRY
[Features]
· Turning drill bit that lets you easily cut grooves for PF pipes (up to 22) in heat insulation materials (styrofoam, urethane foam, etc.).
· Simply attach it on your existing power drill. There is no specific cutting direction, meaning that you can cut out material along a straight line or curved line as desired.Standard Price: MYR 11.89 Days to Ship: 9 Day(s) or more -
Heat Insulation Material Stamping Tool
MIRAI INDUSTRY
[Features]
· Used for stamping styrofoam, urethane foam and other heat insulation materials.
· Lets you create clean stamped holes with ease.
· The blade tip is hardened.
*When stamping a hole in heat insulation material, make sure the hole continues straight to the mounting plate.
· The drill type can also be used with an impact driver.- Volume Discount
Standard Price: MYR 68.60- Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· Used for protecting cables when they are pulled out from a ceiling foundation member, etc.
· All you need is push it into a prepared hole made with a dedicated tool (LGS Stud Punch). It does not project from the ceiling joist, so the ceiling material can be installed cleanly.Standard Price: MYR 2.80- Days to Ship: 9 Day(s) or more -
Dedicated Electrical Wiring Tucker Cable Tucker
MIRAI INDUSTRY
[Features]
· Tool for securing cables on wall surfaces, etc.
· Comes with an adjuster that lets you use two different types of staples with one machine.
· You can use it like a stapler to drive in staples successively.- Volume Discount
Standard Price: MYR 87.04- Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· Perfect for cutting out box mounting holes in plaster boards, veneers, etc.
· The handy saw is compact, lightweight and easy to use like a knife.
· No cut-in hole is required. The double-edged blade, which is curved on one side and straight on the other, can be used for many different purposes.
· The rubber grip prevents slipping. Comes with a resin case.
· The replaceable blade can be changed easily.
· The straight edge part has pull teeth, as well as push teeth that do not easily damage the cables.- Volume Discount
Standard Price: MYR 94.64- Days to Ship: 9 Day(s) or more -
MIRAI INDUSTRY
[Features]
· Use this waterproof spray for fireproof putty in a humid location exposed to water, etc. (Fireproof Putty: MTKB-FP(4))
· A very durable film is formed.Standard Price: MYR 222.09 Days to Ship: 9 Day(s) or more -
Feed-Through Bushing (For Cable Exits)
MIRAI INDUSTRY
[Features]
· Use to protect cables when feeding them through from boxes, switchboards, etc.
· The short type has a neat design with no protrusions from the threaded parts when mounted.
・ It can also be attached to thick plates.Standard Price: MYR 20.76 Days to Ship: 3 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY |
| Product Series | Bushing Punch (Bushing Press-Fitting Tool For Ceiling Foundation Members) | LGS Stud Punch (Hole Opening Tool For Ceiling Foundation Members) | Heat Insulation Material Drill Bit (Groove Cutting Bit For Heat Insulation Materials) | ||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 3 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 3 Day(s) or more |
| Type | Other | Caulking/Sealing Related | Cutting Tool Related | Scale Related | Cutting Tool Related | Cutting Tool Related | Cutting Tool Related | Other | Cable Related Supplies | Cable Tie Tool Related | Other | Cutting Tool Related | Cutting Tool Related | Cable Related Supplies | Marker Related | Caulking/Sealing Related | Other | Other | Scale Related | Marker Related | Cutting Tool Related | Cutting Tool Related | Cable Tie Tool Related | Press-Fit Tool Related | Other | Other | Other | Cable Tie Tool Related | Other | Cutting Tool Related | Cable Tie Tool Related | Cutting Tool Related | Cutting Tool Related | Other | Cable Related Supplies | Cable Related Supplies | Cutting Tool Related | Caulking/Sealing Related | Cable Related Supplies |
Loading...
Configure
Specification/Dimensions
-
Type
- Cutting Tool Related
- Sheet Metal Tool Related
- Cable Tie Tool Related
- Cable Related Supplies
- Pneumatic Tool Related
- Caulking/Sealing Related
- Press-Fit Tool Related
- Scale Related
- Marker Related
- Other
Narrow search by specifying Manufacturer
-
- MISUMI (1)
- MIRAI INDUSTRY (39)
- HELLERMANNTYTON (4)
- DAIA (2)
- HAKKO (2)
- HOZAN (1)
- IKURA SEIKI (1)
- 3M (1)
- VESSEL (1)
- WAGO (1)
- WEIDMULLER (1)
CAD
-
- 2D
- 3D
Related Categories to General Purpose Tools (Options, Others)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy