(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
AS ONE Liquid Feeder Equipment
| Days to Ship |
|
|---|
-
Dry Vacuum Pump DA-20D 5.33kpa
AS ONE
【Product Specifications】
・Model number： ◎DA-20D
・Discharge air volume： 20/24 (L/min)
・Exhaust speed (L/min)： 20/24
・Achieving pressure (kPa)： 5.33
・Inlet diameter (OD) x (ID) mm： 9 x 5
・Internal thermal protector
・Power supply： 100V, 50/60Hz
・Size (mm)： 118 x 242 x 178
・Weight (kg)： 7.2
・Gas contact unit material： Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/heat-resistant NBR (nitrile rubber)
・*Unloader valve is an option (A mechanism that eliminates the differential pressure between pump head and outside by inhaling outside air into the pump head when a diaphragm type dry vacuum pump stops operating).Standard Price: MYR 5,149.96 Days to Ship: 11 Day(s) -
Purge Flow Meter, RK1650 Series
AS ONE
【Product Specifications】
・Model number： RK1650-10A1
・Length： 104mm
・Target gas： AIR
・Maximum flow rate (L/min)： 1
・Body material： Stainless steel (SUS304)
・Connection port： Rc1/8
・Supply pressure： 0.1MPaStandard Price: MYR 1,435.25- Days to Ship: 8 Day(s) or more -
AS ONE
【Product Specifications】
・Model number： KS4-A
・Type： Side mounting (rise ON, 1 point detection)
・Maximum use voltage： 250VAC DC200V
・Maximum opening/closing capacity： 50VA 50W (coil load 8VA)
・Maximum switching current： 0.5A
・Withstand voltage contact between： DC400V
・Contact resistance： 100mΩ or less (initial value)
・Insulation resistance： 100MΩ or more (500VDC, between lead and body)
・Insulation pressure resistance： 2,000VAC, 1 second (between lead and body)
・Material： Stainless
・Available temperature： 100℃
・*Control unit is required to control separately.- Volume Discount
Standard Price: MYR 379.94 Days to Ship: 11 Day(s) -
Purge Flow Meter, RK1250 Series
AS ONE
【Product Specifications】
・Model number： RK1250-12A01
・Length： 126mm
・Target gas： AIR
・Maximum flow rate (L/min)： 0.1
・Body material： Stainless steel (SUS316)
・Connection port： Rc1/4
・Supply pressure： 0.1MPaStandard Price: MYR 3,326.54- Days to Ship: 9 Day(s) or more -
Flexible Fluorine Hose, E-SJ Series
AS ONE
Using a 100% oil-free dry vacuum pump, this pump can handle any corrosive gases such as acid gases and organic solvents to suck and transfer.
Standard Price: MYR 4,010.09- Days to Ship: 16 Day(s) or more -
AS ONE
【Product Specifications】
・Model number： AJD00007
・Material： Outer layer/PVC (vinyl chloride resin), inner layer/FEP (fluorine polymer)
・Maximum operating temperature： 77℃
・Embrittlement temperature： -40℃
・1 roll (15m)
・Inner diameter x outer diameter x thickness： φ3.18 x φ6.35 x 1.59mm
・*Sold by 15m unit.Standard Price: MYR 1,218.50- Days to Ship: 9 Day(s) or more -
AS ONE
· Because of the shielding effect of the conductive PFA part (the outer surface), dielectric breakdown of the tube and the related risk of ignition, which is due to spark discharge, or discharge within an electrically insulating atmosphere, can be prevented.
· As PFA-HG material has been used for the wetted part, there is little elution of fluorine ions in the liquid.
· The conductive part is striped, so the interior fluid status can be checked.Standard Price: MYR 375.80 Days to Ship: 20 Day(s) or more -
Mini Check Valve (Made of Fluorine Resin)
AS ONE
· An ultra-small, precise check valve, developed for high-safety analysis and biochemical use, where fluororesin has been used for the connection part.
· Features excellent resistance to chemicals, and usable with a great variety of fluids for piping and connections.
· Pulling the plunger of the syringe causes it to suction from the IN side, and pushing causes it to discharge from the OUT side.- Volume Discount
Standard Price: MYR 527.40- Days to Ship: 8 Day(s) or more -
Tube Fitting PL6-M5【3,786 Pieces Per Package】
AS ONE
【Product Specifications】
・Model number： PL6-M5
・Material： Body/PBT (Polybutylene terephthalate), Metal portion/yellow copper (no electrolytic nickel plating), O-ring/NBR (nitrile rubber), Open ring/POM (polyacetal)
・Fluid used： Air, water
・Used vacuum pressure： -100kPa
・Maximum operating pressure： 1.0MPa
・Operating temperature range： 0 - 60℃
・Type： Elbow
・Applicable tube outer diameter： φ6mm
・Applicable screw size： M5 x 0.8Standard Price: MYR 41.87 Days to Ship: 11 Day(s) -
Linicon Vacuum Pump, LV Series
AS ONE
【Product Specifications】
・Model number： LV-660 (50Hz)
・Achieving vacuum degree (kPa)： Approx -80 (-600mmHg)
・Discharge air volume (L/min)： 25
・Power consumption (50/60Hz)： 70
・Rated hour： Continuous
・Discharge port size： PT1/4 (with silencer)
・Inlet port size： PT1/4
・Power supply： 100VAC 60Hz only
・Power cord length： 1.5m cabtyre cord
・Power switch： With toggle switch
・Size： 241 x 177 x 204mm
・Weight： 6.3kg
・Accessories： Socket, plug (for φ8mm), silencer x 1 piece eachStandard Price: MYR 3,161.58- Days to Ship: 8 Day(s) -
Polyurethane Tube φ5.0 x φ8mm Black 1 Roll (20m)
AS ONE
【Product Specifications】
・Model number： UB0850-20-B
・Material： PU (polyurethane)
・Operating temperature range： -15 to +60℃
・Maximum operating pressure： 0.8MPa (at20℃・65%RH)
・Used vacuum pressure： -100kPa
・Fluid used： Water, air
・1 roll (20m)
・Color： Black
・Inner diameter x outer diameter： φ5.0 x φ8mm
・*The sales will be 20m units.
・*Display price is the price of 20m.
・*When you use water by connecting to one touch joint, please use an insert ring (sold separately).Standard Price: MYR 362.73 Days to Ship: 9 Day(s) or more -
AS ONE
【Product Specifications】
・Model number： FM-PF200-201-A500-21
・Flow rate (mL/min)： 50 - 500
・Highest pressure： 0.35MPa (G)
・Fluid temperature： MAX 40℃
・Flow rate accuracy： +/- 5% at FS
・Connection port size： TV1/4
・Material： PFA, PCTFE (fluoropolymer, perfluor packing
・Size： 32 x 98 (maximum) x 106mm
・With upper needle valveStandard Price: MYR 4,247.54 Days to Ship: 36 Day(s) -
Electric Feedthrough for Vacuum
AS ONE
Electrical feedthrough for transporting and controlling electrical signals into equipment that maintains a vacuum state.
- Volume Discount
Standard Price: MYR 963.77- Days to Ship: 8 Day(s) or more -
Conductive (Antistatic) Tube Cover, CTC Series【20 Pieces Per Package】
AS ONE
【Product Specifications】
・Model number： CTC-05
・Outer diameter of applicable tube (φ)： 6, 8mm, 1/4""
・Quantity： 1 roll (20m)
・Material： Conductive PP (polypropylene)
・Volume resistivity： 5.0 x 10^2Ω・cm
・Potential amount of surface charging： 0.11 - 1.14kV (measurement distance 1m)
・Operating temperature range： Room temperature to 85℃ (temperature of tube surface)
・Please make sure you ground the product when you use it.- Volume Discount
Standard Price: MYR 580.39- Days to Ship: 12 Day(s) or more -
Standard Price: MYR 426.98- Days to Ship: 9 Day(s) or more -
AS ONE
Brushless motor with excellent durability is used.
- Volume Discount
Standard Price: MYR 1,349.79 Days to Ship: 20 Day(s) or more -
Hand Pump unit/dedicated hose/replacement rubber
AS ONE
Because it is made from ABS, it is light and resistant to seawater, etc. As a diaphragm type, it can tolerate some dirt and sand.
- Volume Discount
Standard Price: MYR 521.75- Days to Ship: 9 Day(s) or more -
AS ONE
Suctions in when the handle is pressed down and discharges when the handle is pulled up.
Standard Price: MYR 2,985.17- Days to Ship: 10 Day(s) or more -
AS ONE
Pump that can be used to transfer solvents even in areas without a drive source.
[Features]
·Can be used for transferring solvents with high viscosity.
[Applications]
·Ideal for transferring thick liquids like honey.Standard Price: MYR 5,124.50 Days to Ship: 16 Day(s) or more -
AS ONE
Suitable for transferring cutting fluid / waste liquid / solvents, etc. from drums. Because it does not run on electricity, it can be used in explosion-proof areas as well.
Standard Price: MYR 7,473.27- Days to Ship: 15 Day(s) or more -
Aspirator Water Steel and fluoropolymer Water Pump
AS ONE
Aspirator that features a high vacuum and high exhaust. Made of metal, with better accuracy than glass and stable performance.
Standard Price: MYR 207.66- Days to Ship: 8 Day(s) or more -
Naflon® PTFE Tube (Metric Size)
AS ONE
· Great high temperature mechanical strength and sturdy with regard to bending fatigue.
· Features low permeation resistance and can be used as a hose for halogen gases such as chlorine, etc.- Volume Discount
Standard Price: MYR 126.13- Days to Ship: 5 Day(s) or more -
AS ONE
[Features]
· Great high temperature mechanical strength and sturdy with regard to bending fatigue.
· Features low permeation resistance and can be used as a hose for halogen gases such as chlorine, etc.- Volume Discount
Standard Price: MYR 229.13- Days to Ship: 9 Day(s) or more -
AS ONE
Pure fluororesin tube that does not contain any fillers or plasticizers.
[Features]
·Liquid feeder equipment with excellent chemical, heat and weather resistance.
·Excellent non-adhesiveness, so dirt and scale do not easily adhere.
·Deterioration of electrical characteristics is extremely small at high temperatures and high humidity.
[Applications]
·Ideal for electrical insulation.- Volume Discount
Standard Price: MYR 1,375.78- Days to Ship: 9 Day(s) or more -
AS ONE
[Features]
·This is a pure fluororesin tube containing no fillers or plasticizers.
·It has excellent chemical resistance, heat resistance, and weather resistance.
·It has excellent non-adhesiveness and is resistant to dirt and scale.
·It is suitable for electrical insulation applications because it exhibits very little deterioration in electrical properties in high temperature, high humidity, and high frequency regions.
[Applications]
·Suitable for electrical insulation applications- Volume Discount
Standard Price: MYR 182.38- Days to Ship: 9 Day(s) or more -
NAFLON PFA-HG Tube (Inch Size)
AS ONE
· Eluted fluorine ions are reduced.
· The inner surface of the tube has been smoothed (Rt = 0.2 μm).
· It has reduced the accumulation of particles and chemicals.
· Reduces cleaning time.
· Superior transparency and dielectric strength.
· Reduces the amount of chemical liquid permeation by reducing the surface area inside the tube.
· It improves stress crack resistance under stressful environments (e.g. sulfuric acid hydrogen peroxide or fuming sulfuric acid).- Volume Discount
Standard Price: MYR 215.40- Days to Ship: 5 Day(s) or more -
AS ONE
· Has high dimensional accuracy as well as superior pressure resistance and chemical resistance.
· Excellent flame retardant properties (UL94 V-O, low outgassing).
· Features excellent acid and alkali resistance at high temperatures.
· It has excellent hydrolytic stability and is not chemically affected even in water at high temperature or high pressure.- Volume Discount
Standard Price: MYR 804.31- Days to Ship: 8 Day(s) or more -
AS ONE
· A fluororesin type with excellent chemical resistance, heat resistance and electrical insulation.
· The length is freely telescopic, suitable for piping of movable components.
· Translucent tube made from PFA that enables the flow of chemicals to be easily confirmed.- Volume Discount
Standard Price: MYR 1,199.67 Days to Ship: 9 Day(s) or more -
AS ONE
· Suitable for HPLC piping.
· As the inner surface of the tube is smooth and non-adhesive, it has dirt resistant properties.
· It is transparent, allowing the state of the interior to be seen.- Volume Discount
Standard Price: MYR 793.79- Days to Ship: 8 Day(s) -
AS ONE
· Replace the PTFE fittings and valves with abacus type ferrules and fasten with a cap nut to close the hole and block fluid.
Standard Price: MYR 129.80 Days to Ship: 12 Day(s) or more -
Miniature CTFE 2 Way Cork (Tube Connection Type)
AS ONE
· Boasts superior chemical resistance due to the fluorine resin material used for all parts.
· The body is compactly miniaturized and does not take up space.Standard Price: MYR 1,633.19 Days to Ship: 21 Day(s) -
Miniature CTFE 3 Way Cork (Tube Connection Type)
AS ONE
· Boasts superior chemical resistance due to the fluorine resin material used for all parts.
· The body is compactly miniaturized and does not take up space.- Volume Discount
Standard Price: MYR 1,297.53 Days to Ship: 8 Day(s) -
Chemical Resistant CTFE Luer Valve
AS ONE
· Boasts superior chemical resistance due to the fluorine resin material used for all parts.
· The lock type can be connected with a single touch, making operation simple.- Volume Discount
Standard Price: MYR 907.13- Days to Ship: 8 Day(s) -
AS ONE
· Orifice diameter is large since valve (core rod) component is press-fitted.
· A press-fit type allowing the main unit to be easily installed.- Volume Discount
Standard Price: MYR 902.19- Days to Ship: 8 Day(s) or more -
Azufuron Female 2-Way Valve Press-Fit Type
AS ONE
· Replacing the separately sold male connectors (male screw + acorn nut specification) allows for a tube connection of the desired size.
· A press-fit type allowing the main unit to be easily installed.- Volume Discount
Standard Price: MYR 1,173.51 Days to Ship: 8 Day(s) -
AS FLON YK Connection Half Male Threaded Valve
AS ONE
· One side is fixed with a male screw connection, and the other side with an acorn nut.
Standard Price: MYR 1,450.78- Days to Ship: 8 Day(s) or more -
AS FLON® YK Connection Half-Tapped Valve
AS ONE
One side is a female thread connection, and the other side is a part for piping that is fixed with a cap nut.
- Volume Discount
Standard Price: MYR 959.20- Days to Ship: 21 Day(s) -
AS ONE
· A press-fit type PTFE valve can be connected to individually adjust the flow rate.
· The side of the main body has a PT screw thread, and can be connected with various joints (plug included).Standard Price: MYR 4,855.22- Days to Ship: 21 Day(s) -
AS ONE
· A single line can be divided into multiple lines.
· The side of the main body has a PT screw thread, and can be connected with various joints (plug included).Standard Price: MYR 2,429.91- Days to Ship: 20 Day(s) or more -
Chemical liquid valve (manual)
AS ONE
· The body is made of New PFA with excellent corrosion resistance that supports chemical solutions such as acid, alkali, and ultra pure water.
· By supporting the movement of the diaphragm with a buffer, distortion and breakage of the diaphragm can be prevented, providing it with back pressure resistance and a long service life.Standard Price: MYR 1,674.18 Days to Ship: 53 Day(s) or more -
Rear Fitting (for PVDF Hard Tube)
AS ONE
· Features outstanding chemical resistance and autoclave tolerance.
· Made entirely of PVDF, featuring excellent chemical resistance and mechanical strength.Standard Price: MYR 125.87 Days to Ship: 12 Day(s) or more -
Rear Fitting (for PVDF Soft Tube)
AS ONE
· Features outstanding chemical resistance and autoclave tolerance.
· Made entirely of PVDF, featuring excellent chemical resistance and mechanical strength.Standard Price: MYR 136.67- Days to Ship: 12 Day(s) or more -
Super-Small Type Coupling (PP / With Valve)
AS ONE
· PP material provides excellent resistance to chemicals and enables gamma ray sterilization.
· Features a thumb-operable latch structure, allowing for one-handed attachment and removal.- Volume Discount
Standard Price: MYR 235.55- Days to Ship: 5 Day(s) or more -
Tube For Liquid Feeding, NAFLON BT Tube
AS ONE
· More flexible, easier to bend, and transparent compared to regular PTFE tubing.
· Withstands almost all chemicals.
· Excellent non-adhesiveness and washing is easy.- Volume Discount
Standard Price: MYR 118.51- Days to Ship: 17 Day(s) or more -
Standard Price: MYR 717.64 Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Flow rate range(ml/min) |
| Size(mm) |
| Inner Diameter × Outer Diameter(mm) |
| Overall Length(m) |
| Operating Pressure(mpa) |
| Compatible Tube Outer Diameter(mm) |
| Screw Size |
| Other |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE |
| Product Series | Conductive (Antistatic) Tube Cover, CTC Series【20 Pieces Per Package】 | ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 11 Day(s) | 8 Day(s) or more | 11 Day(s) | 9 Day(s) or more | 16 Day(s) or more | 9 Day(s) or more | 20 Day(s) or more | 8 Day(s) or more | 11 Day(s) | 8 Day(s) | 9 Day(s) or more | 36 Day(s) | 8 Day(s) or more | 12 Day(s) or more | 9 Day(s) or more | 20 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 15 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 8 Day(s) | 12 Day(s) or more | 21 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 21 Day(s) | 21 Day(s) | 20 Day(s) or more | 53 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 5 Day(s) or more | 17 Day(s) or more | 9 Day(s) or more |
| Product Type | - | - | - | - | - | - | Liquid feeding tube | Tube joint | - | - | - | - | - | - | Tubing pump | Fluid feed pump | Handy Pump | Handy Pump | Handy Pump | Handy Pump | Tube joint | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube | Spiral Tube | Liquid feeding tube | Tube joint | Tube joint | Tube joint | Tube joint | Tube joint | Tube joint | Other | Tube joint | Tube joint | Tube joint | Other | Tube joint | Tube joint | Tube joint | Liquid feeding tube | Tube joint |
| Flow rate range(ml/min) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 400 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Size(mm) | - | - | - | - | - | - | - | - | - | 135×91×146 ～ 241×177×204 | - | - | - | - | - | 69.2×50.0×73.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Inner Diameter × Outer Diameter(mm) | - | - | - | - | - | - | 2×3 | - | - | - | - | - | - | - | 0.8×4.1 ～ 9.7×14.6 | - | 36×45 | - | - | - | - | 0.5×1.0 ～ 49×53 | 2×3 ～ 10×12 | 3.17×6.35 ～ 9.52×12.7 | 1.59×3.17 ～ 10.7 ×12.7 | 2.17×3.17 ～ 3.96×6.35 | 0.025x0.794 ～ 1.0x1.588 | φ4×φ6 | 0.5x1.588 ～ 1.00x1.588 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | φ2×φ4 ～ φ7×φ10 | - |
| Overall Length(m) | - | - | - | - | - | - | 10 | - | - | - | - | - | - | - | 7.5 ～ 15 | - | 0.25 | 0.632 | 1.1 | - | - | - | - | - | - | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operating Pressure(mpa) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0～0.10(0～1kgf/cm2) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Vacuum-0.84 | - | 16.2 |
| Compatible Tube Outer Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | φ6 | φ1.6 | φ3 | - | - | - | φ6 ～ φ8 | φ6 ～ φ8 | φ6 ～ φ8 | φ6 ～ φ8 | - | - | - | - | - | - |
| Screw Size | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Option | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Product Type
-
Flow rate range(ml/min)
-
Size(mm)
-
Inner Diameter × Outer Diameter(mm)
- 0.025x0.794
- 0.065x0.794
- 0.1x0.794
- 0.125x0.794
- 0.13×(1/16)
- 0.13x1.588
- 0.17×(1/16)
- 0.17x1.588
- 0.175x0.794
- 0.2x0.794
- 0.25x0.794
- 0.25×(1/16)
- 0.25x1.588
- 0.46×0.92
- 0.5x0.794
- 0.5×1.0
- 0.50×(1/16)
- 0.5×1.5
- 0.5x1.588
- 0.56×1.06
- 0.68×1.18
- 0.7×1.7
- 0.75×(1/16)
- 0.75x1.588
- 0.8×1.4
- 0.8×4.1
- 0.86×1.46
- 0.9×1.7
- 0.96×1.56
- 1.00×(1/16)
- 1.0x1.588
- 1.00x1.588
- 1 x 3
- 1.07×1.67
- 1.19×1.79
- 1.35×1.95
- 1.5×2.5
- 1.59×3.17
- 1.6×4.9
- 2×3
- 2.0×3.0
- 2X4
- 2×4
- φ2×φ4
- 2.17×3.17
- 2.5×3.5
- 3×4
- 3.0×4.0
- 3×5
- 3×8
- 3.1×6.5
- 3.17×6.35
- 3.96×6.35
- 4×5
- 4.0×5.0
- 4X6
- 4×6
- 4.0×6.0
- φ4×φ6
- 4×10
- 4.35×6.35
- 4.8×8.1
- 4.8×9.8
- 5×6
- 5×7
- 6X8
- 6×8
- 6.0×8.0
- 6×12
- 6.35×9.52
- 6.4×9.7
- 6.4×11.4
- 7×9
- φ7×φ10
- 7.52×9.52
- 7.9×11.3
- 7.9×13
- 8×9
- 8X10
- 8×10
- 8.0×10.0
- 8×17
- 9×10
- 9×12
- 9.52×12.7
- 9.7×14.6
- 10×11
- 10X12
- 10×12
- 10.7 ×12.7
- 11×12
- 11×13
- 12×13
- 12×14
- 12.7×26
- 13×15
- 13×16
- 14×16
- 15×17
- 16×17.5
- 16×18
- 16×19
- 19×21
- 20×23
- 21.5×23.5
- 22×24
- 23×25
- 23×27
- 25×27
- 25×28
- 26×29
- 27.5×29.5
- 33×36
- 36×45
- 39×42
- 46×50
- 49×53
-
Overall Length(m)
-
Operating Pressure(mpa)
- Vacuum-0.84
- 0～0.10(0～1kgf/cm2)
- 0.75
- 0.82
- 1
- 1.09
- 1.45
- 1.63
- 1.65
- 1.75
- 1.83
- 2.04
- 2.18
- 2.28
- 2.40
- 2.92
- 3.00
- 3.27
- 16.2
- 24
- 29
- 34
-
Compatible Tube Outer Diameter(mm)
-
Screw Size
- R 1/4
- R 1/8
- R 1/2
- R 3/4
- Other
-
Other
Narrow search by specifying Manufacturer
-
- AS ONE (219)
- SANPLATEC (9)
- HAKKOH (2)
- CHUKOH (1)
- FLONCHEMICAL (1)
- MUSASHI_ (1)
- NIREI INDUSTRY (1)
- TRUSCO NAKAYAMA (1)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy