(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Pliers/Nippers/Pincers（Page10）
| Days to Ship |
|
|---|
-
Magic Tip Snap Ring Pliers for Shaft (90° Tip)
WIHA
[Features]
· Magic tip snap ring pliers for shafts in accordance with DIN ISO 5254.
· Head shape: Tip angle of 90°.
· Design: Includes a high-elasticity, high-accuracy magic tip which uses the highest grade ball bearing steel.
· Magic Tip, subjected to special surface processing resistant to rust, prevents the snap ring from flying off.
· Heat-treated for excellent durability and the tip is slim for outstanding operability.
· Material: Chrome vanadium tool steel, tempering.
· Application: Used when installing or removing the snap ring on/from the shaft and axle.Standard Price: MYR 227.65- Days to Ship: 7 Day(s) or more -
Magic Tip Snap Ring Pliers Set, 4 pcs
WIHA
[Features]
· Magic tip snap ring pliers 4-piece set.
· Design: Includes a high-elasticity, high-accuracy magic tip which uses the highest grade ball bearing steel.
· Heat-treated for excellent durability and the tip is slim for outstanding operability.
· Application: A set of 2 pieces each of snap ring pliers for holes and shafts.
· Used with insertion/removal of snap rings for bore hole and axle.
· Weight: 650 gStandard Price: MYR 1,041.05 Days to Ship: 11 Day(s) -
WIHA
[Features]
· A 4-piece set of conventional-type snap ring pliers that have already permeated the market.
· Design: Basic snap ring pliers which satisfy the acceptable basic performance in the marketplace.
· The tip is precision machined to enable work at high speed.
· Maintains accuracy, even during tightening, and does not bend.
· Application: Used with snap rings for bore hole insertion/removal and axle installation/removal.
· Weight: 680 g.
· A set of 2 pieces each of snap ring pliers for holes and shafts.Standard Price: MYR 838.80 Days to Ship: 11 Day(s) -
Combination pliers (electrical work pliers professional)
WIHA
Combination pliers in accordance with DIN ISO 5746.
[Features]
· Versatile pliers that can be used for holding objects in addition to cutting soft and hard wires and cables.
· Jaw section is serrated.
· The blade is induction hardened to roughly HRC 60.
· The material is special tool steelStandard Price: MYR 216.75- Days to Ship: 7 Day(s) or more -
Precision Crimping Pliers (Die Exchange Type)
ENGINEER
Crimping pliers capable of handling more than 300 types of terminals with 3 interchangeable dies.
[Features]
· Crimped with high-precision die, for amazingly fine finish.
· Can be replaced with separately sold die to handle more terminals.
· Equipped with a replaceable-type die, it is convenient to carry.
· With wire stripper and cutter (PAD-11, PAD-12, PAD-13).
· Can be mounted on the PAD-11, 12, 13 main units (PAD-11S, PAD-12S, PAD-13S).
[Applications]
· Ideal for crimping of various terminals in electrical work, trial manufacture of electronic equipment, etc.- Volume Discount
Standard Price: MYR 164.12- Days to Ship: 9 Day(s) or more -
ENGINEER
Equipped with a stopper that can freely adjust the strip length between 2 and 20 mm.
[Features]
· Just by holding the grip, a flat cable with a width of 12 mm or less can be easily stripped in a single action.
· Solid wires from AWG20 to 10 can be stripped.
* The core may be disconnected when stripping wires with a thin insulating coating (such as fluoropolymer wire).- Volume Discount
Standard Price: MYR 145.13 Days to Ship: 9 Day(s) -
ENGINEER
This is a tip cutter, perfect for cutting fine wire using a precision vertical operation.
[Features]
· Uses environmentally friendly elastomer resin and gently fits to hands.
· The grip part supports ESD anti-static countermeasures, with a surface resistance value of 1 x 10⁶ to 10⁷ Ω/sq. that allows secure work on circuit boards.
* Not an insulated tool.- Volume Discount
Standard Price: MYR 169.84 Days to Ship: 9 Day(s) -
ENGINEER
With a small head, these nippers are perfect for circuit board work, and for creating models.
[Features]
· Head is compact and can cut vertically.
· The blade part has high durability thanks to thorough hardening which achieves sharp cutting ability.
· With fitting to prevent the blade from opening enough for the spring to fall out.
· Uses environmentally friendly elastomer for the grip part that tightly fits to hands.
· The grip part has a surface resistance value of approximately 1 x 10^6 to 1 x 10^7 Ω/sq (not an insulated tool).
[Applications]
· It can be used for fine processing, gate processing, cutting of etching parts, etc.
· Ideal for cutting parts of plastic models.- Volume Discount
Standard Price: MYR 107.06 Days to Ship: 9 Day(s) -
ENGINEER
Orthodox type longnose pliers.
[Features]
· Classic type with sturdy body and flexible tip.
[Applications]
· For detailed work.
· Ideal for detailed work on copper wire, thin wire bending, cutting and precision work.- Volume Discount
Standard Price: MYR 96.19 Days to Ship: 9 Day(s) -
Wire stripper (for ultra fine wire, thin wire, thick wire)
ENGINEER
A high-performance stripping unit with excellent sharpness and wear resistance.
[Features]
· Utilizes precision polishing finishing and achieves a shape that is extremely close to a perfect circle.
· Maintains outstanding sharpness without damaging the core wire.
· The stripping hole is designed to fit both stranded wires and solid wires.
· High-carbon steel body for excellent resistance to wear.
· Boasts excellent oil resistance.
· Uses an eco-friendly elastomer design for the grip.
[Applications]
· Optimal for stripping stranded and single wires.- Volume Discount
Standard Price: MYR 174.36- Days to Ship: 9 Day(s) -
ENGINEER
Optimal for the bending of wires, wire casting, and coiling
[Features]
· Round-nose tip.
[Applications]
· Optimal for the bending of wires, wire casting, and coiling.- Volume Discount
Standard Price: MYR 113.91 Days to Ship: 9 Day(s) -
LOBTEX
Incorporated a special single-action spring mechanism to simplify work. and the soft grip reduces hand fatigue during long working hours.
[Features]
· Adopted a special spring mechanism and soft grip to reduce hand fatigue during long working hours- Volume Discount
Standard Price: MYR 81.57- Days to Ship: 8 Day(s) or more -
LOBTEX
[Features]
·The standard for grabbing, turning, and cutting.
·There are two mouth widths depending on the size of the object to be grasped.
·It is rust-resistant and has excellent durability.
·For grasping things that cannot be grasped by hand.
·For cutting, twisting, bending, and pulling wire rods.
·For bending thin iron plates, etc.
·For tightening and removing bolts and nuts.- Volume Discount
Standard Price: MYR 95.66 Days to Ship: 8 Day(s) or more -
LOBTEX
[Features]
· The curved toothing is perfect for clamping round items such as pipes.
· The straight part of the tooth tip engages firmly even small fragments through a fine slip-resistant treatment.
· Can be used as a non-stop wrench to turn while keeping the target object fixed- Volume Discount
Standard Price: MYR 130.85- Days to Ship: 9 Day(s) -
Vise Pliers Curved Type (with Cutter)
LOBTEX
Pliers that can hold a member while holding it in its mouth.
[Features]
·A cutter blade function is added to the features of the VM type.
·It can also be used as a wire cutter.
·Versatile tool with functions such as adjustable wrench, pliers, vise, and pliers.
[Applications]
·Convenient for gripping, turning, twisting, bending, and cutting iron plates, wires, angles, copper wires, etc.
·It is widely used in various fields such as woodworking, metalworking, and machine work.- Volume Discount
Standard Price: MYR 94.59- Days to Ship: 8 Day(s) or more -
LOBTEX
[Features]
· Ideal for clamping flat objects such as plates and square timber.
· Wide range of uses, such as sheet metal and welding work, etc.- Volume Discount
Standard Price: MYR 123.56- Days to Ship: 8 Day(s) or more -
LOBTEX
[Features]
· Optimal for fine work such as bolt tightening or pin extraction, etc., in narrow spaces where fingers cannot reach- Volume Discount
Standard Price: MYR 134.99- Days to Ship: 9 Day(s) -
LOBTEX
With wide bore width and deep jaws, it is optimal as temporary stop for angle/channel steel.
- Volume Discount
Standard Price: MYR 143.15- Days to Ship: 8 Day(s) or more -
Vise Pliers C Type (with Plate)
LOBTEX
The clamp part has a swivel pad shape that makes it ideal for holding tilted objects and subtle shapes.
- Volume Discount
Standard Price: MYR 159.90- Days to Ship: 9 Day(s) -
LOBTEX
With wide and deep bore width, optimal as temporary stop for deep locations.
Standard Price: MYR 305.28- Days to Ship: 8 Day(s) -
LOBTEX
It is effective for holding pipes. Ideal for both welding and riveting.
- Volume Discount
Standard Price: MYR 246.82 Days to Ship: 8 Day(s) -
LOBTEX
The flow of gases can be stopped without a closing valve on the copper pipe.
[Features]
· For blocking of copper tubing in air conditioners and freezers, and of hoses for automobiles, etc.- Volume Discount
Standard Price: MYR 234.24 Days to Ship: 9 Day(s) -
Pliers Set (Master Grip Type) PLG3
TONE
[Features]
· A set of Master Grip pliers, longnose pliers, and strong nippers.
· The hooks fit onto the fingertips even if oily.
· The hook prevents the hand from slipping even when working at at a downward incline in deep areas, etc.
· The hooks convey the force that fingertips apply even in delicate work that involves fine opening and closing- Volume Discount
Standard Price: MYR 332.50 Days to Ship: 9 Day(s) -
HOZAN
Heavy-snippers that have wear-resistance improved by about 60% compared to conventional models.
[Features]
· Hard chrome-plated finish with high wear resistance and smooth sharpness maintained.
· Also suitable for cutting aramid fibers used for optical fiber cables, etc.
[Applications]
· Ideal for cutting thin aluminum plates or copper wires.- Volume Discount
Standard Price: MYR 136.00 Days to Ship: 1 Day(s) or more -
HOZAN
Compact general-purpose pliers.
[Features]
· Coil spring device and elastomer grip adopted to reduce fatigue during continuous work.
· Anti-slip knurling helps to hold the workpiece firmly.
· The blade has HRC58 hardness capable of cutting 2.6 mmφ (diameter 2.6 mm) copper wire and 2 mm2 copper stranded wire.
[Applications]
· Convenient for cutting copper wire, etc. General purpose type.- Volume Discount
Standard Price: MYR 13.48- Days to Ship: 1 Day(s) or more -
HOZAN
Clip joint (fitting piece) removal/attachment pliers for clip type roller chains, a 2 way type which can also be used on the side.
[Features]
· Supports a wide variety of uses, from production machine chains to chains on bicycles and motorized 2-wheel vehicles.
· Daily maintenance is made simpler with these pliers specifically designed for chains.
· P-221, which can also be used on the side, allows installing and removing of the chain in narrow places.
· The steps and V-shaped grooves securely hold a clip, suppressing sliding in the lateral direction and enabling reliable work.
· When removing or attaching the clip, there is no need to worry about whether to hook the step to the clip or pin.
· The tips of pliers have magnets to prevent the removed clip from getting lost.
[Applications]
· For attachment and detachment of roller chain clips of industrial machinery, bicycles, etc.- Volume Discount
Standard Price: MYR 114.93 Days to Ship: 1 Day(s) or more -
Nipper N-23 and Spring for N-23【1-10 Pieces Per Package】
HOZAN
Nippers that come equipped with a coil spring to prevent fatigue even during continuous work.
[Features]
· Uses an elastomer grip which is soft on the hands.
· Equipped with coil spring to prevent fatigue even during continuous work.
· Long blade length.
· Can be used to cut the wires coming out of the modular jack at once.
· Not too long and not too short to be a size that feels just right.
[Applications]
· Cutting wiring cords, etc.- Volume Discount
Standard Price: MYR 13.48- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 200.35 Days to Ship: 8 Day(s) -
(Merry) "Heavy-Duty Sharp-Edged Crimping Nippers"
MUROMOTO TEKKO
Wire cutters with strong crimping that have a excellent cut end due to the sharp blade specifications.
[Features]
·Simple crimping of terminals 1.25 to 3.5 sq.
・ The blade is sharply polished with a sharp blade specification, and the cut end is almost straight.
·Light sharpness due to the adoption of the eccentric lever principle. Cutting capacity is improved compared to the conventional product (206S-200).
·225 mm size, flush cut type.
·With non-slip grip (molded cover). With holes for mounting fall prevention string.
[Applications]
・ Ideal for cutting soft iron wire, copper wire, VA wire, Insulok, and electrical equipment.
·For electrical work with 225 mm molded grips with holes for mounting fall prevention devices.- Volume Discount
Standard Price: MYR 207.90 Days to Ship: 9 Day(s) -
MUROMOTO TEKKO
Powerful oblique nippers with a blade angle of 40°. Ideal for cutting work in electrical and communication work.
- Volume Discount
Standard Price: MYR 183.97- Days to Ship: 9 Day(s) -
Diamond type truss screw pliers
3PEAKS
With changed vertical grooves and holding part, truss screws are now supported. Securely holds objects at 3 points with a tip shape with excellent holding ability and a diamond shape.
- Volume Discount
Standard Price: MYR 138.73- Days to Ship: 9 Day(s) or more -
"Neji-Saurus GT" Screw Removal Pliers
TRUSCO NAKAYAMA
A rescue tool for "screw troubles". Considering the design, original color has been adopted. Equipped with cutting blades to easily cut φ1.2 mm copper wires. Grips and removes crushed screws, rusted screws and over-fastened screws.
Standard Price: MYR 132.55 Days to Ship: 8 Day(s) -
TRUSCO NAKAYAMA
An improved model of long-nose pliers. The tip is long, making it ideal for deep work. Includes a pliers function.
Standard Price: MYR 115.81 Days to Ship: 8 Day(s) -
TRUSCO NAKAYAMA
It has a wide range of applications such as precision machining and electric appliances repair.
Standard Price: MYR 96.42 Days to Ship: 9 Day(s) -
KNIPEX
[Features]
· The gripping surface has a shape that supports plates and pipes, allowing it to be used in a wide range of applications.
· The side cutter can cut soft wire, hard wire, and piano wire.
· Hardness of the cutter which has been carefully quenched is approximately HRC 64.
· Oil tempered and quenched high quality special tool steel is used for the material.
· Head finish: Polished.
· Handle Specification: Plastic Coating- Volume Discount
Standard Price: MYR 228.31- Days to Ship: 8 Day(s) or more -
KNIPEX
[Features]
· It can cut hard wires and piano wires.
· Hardness of the cutter which has been carefully quenched is approximately HRC 64.
· Oil tempered and quenched high quality special tool steel is used for the material.
· Head finish: Polished.
· Handle Specification: Comfort- Volume Discount
Standard Price: MYR 224.50- Days to Ship: 5 Day(s) or more -
KNIPEX
[Features]
· The gripping surface has a shape that supports plates and pipes, allowing it to be used in a wide range of applications.
· The side cutter can cut soft wire, hard wire, and piano wire.
· Hardness of the cutter which has been carefully quenched is approximately HRC 64.
· Oil tempered and quenched high quality special tool steel is used for the material.
· Head finish: Chrome plated.
· Handle Specification: ComfortStandard Price: MYR 435.23 Days to Ship: 8 Day(s) -
KNIPEX
Cutting, Grasping, Bending
[Features]
· The cutter portion has undergone a very thorough hardening process, enabling it to cut through piano wire as well.
· It can easily grasp pipe-shaped objects.
· Demonstrates the full potential of the lever principle through its unique lever design, making cutting, gripping, and bending work easier.
· The gripping surface has a shape that supports plates and pipes, allowing it to be used in a wide range of applications.
· The side cutter can cut soft wire and hard wire.
· Cuts thick cable more efficiently with a longer side cutter.
· Hardness of the cutter which has been carefully quenched is approximately HRC 60.
· Oil tempered and quenched special tool steel is used for the material.
· Head finish: Chrome plated.
· Handle specification: Comfort.- Volume Discount
Standard Price: MYR 205.31- Days to Ship: 5 Day(s) or more -
KNIPEX
[Features]
· The gripping surface has a shape that supports plates and pipes, allowing it to be used in a wide range of applications.
· The side cutter can cut soft wire and hard wire.
· Cuts thick cable more efficiently with a longer side cutter.
· Head finish: Polished.
· Handle Specification: Plastic Coating- Volume Discount
Standard Price: MYR 139.48- Days to Ship: 5 Day(s) or more -
KNIPEX
[Features]
· Cutting, grasping, bending.
· The cutter portion has undergone a very thorough hardening process, enabling it to cut through piano wire as well.
· It can easily grasp pipe-shaped objects.
· Demonstrates the full potential of the lever principle through its unique lever design, making cutting, gripping, and bending work easier.
· The gripping surface has a shape that supports plates and pipes, allowing it to be used in a wide range of applications.
· The side cutter can cut soft wire and hard wire.
· Cuts thick cable more efficiently with a longer side cutter.
· Head finish: Polished.
· Hardness of the cutter which has been carefully quenched is approximately HRC 60.
· Oil tempered and quenched special tool steel is used for the material.
· Handle Specification: Comfort- Volume Discount
Standard Price: MYR 182.52- Days to Ship: 5 Day(s) or more -
Powerful Pliers for Overhead Wire Construction
KNIPEX
Cutting, Grasping, Bending
[Features]
· The cutter portion has undergone a very thorough hardening process, enabling it to cut through piano wire as well.
· It can easily grasp pipe-shaped objects.
· Powerful pliers for overhead wire construction capable of also cutting ACSR (Aluminum stranded wire containing a steel core).
· This unique lever design maximizes an effect of the principle of leverage, thus it can minimize the burden of cutting.
· Head tip gripping surface has cross cut serrations.
· Grip surface of lower part of joint has a lateral cut.
· Head Finish: Polished- Volume Discount
Standard Price: MYR 462.33- Days to Ship: 9 Day(s) -
Electrician's Pliers 1301/1302/1305
KNIPEX
Electrician's pliers that are ideal for all sort of work related to cables.
[Features]
· Pliers that are ideal for wiring work.
· Cutting medium-hardness wires.
· High-frequency quench-treated precision cutting blade and approx. 60 HRC blade hardness.
· With precision strip hole.
· Crimping of end sleeve.
· Vanadium electric steel, forged, multi-stage oil-quenched.
[Applications]
· Ideal for working involving grasping or bending wires.Standard Price: MYR 326.85- Days to Ship: 5 Day(s) or more -
KNIPEX
Essential tool for work related to electrical facilities.
[Features]
· 1.5 mm2 and 2.5 mm2 single core precision stripping is possible.
· The hardness of the precision cutter part, which has been quenched, is approximately HRC 60, and it can cut soft wires of up to 4.0 mm in diameter.
· Oil tempered and quenched high quality special tool steel is used for the material.
· Head finish: 1422-160 (polished), 1425-160 (chrome plated).
· Handle Specification: ComfortStandard Price: MYR 342.03- Days to Ship: 5 Day(s) or more -
KNIPEX
[Features]
· For machining fine wire, precious metals, and gemstones.
· It is also perfect for bending and cutting of precision electronic components.
· The tip is a precisely machined cone type.
· Head: Polished (1901), chrome plated (1903).
· Handle Specification: Plastic CoatingStandard Price: MYR 273.68- Days to Ship: 5 Day(s) or more -
KNIPEX
[Features]
· Head has a short, flat shape.
· Grip surface has linear cut for slip prevention.
· Oil tempered and quenched special tool steel is used for the material.
· Head: Polished.
· Handle: Plastic coating- Volume Discount
Standard Price: MYR 161.61- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Category |
| Plier Type |
| Plier Type |
| Nipper Type |
| Overall Length(mm) |
| Shaft/hole |
| With or without Spring |
| Steel Wire Cutting Performance(φ/mm) |
| Copper Wire Cutting Performance(φ/mm) |
| Piano Wire Cutting Performance(φ/mm) |
| Plastic Cutting Performance(φ/mm) |
| Stranded Wire Cutting Ability(φ/mm) |
| Stainless steel cutting ability(φ/mm) |
| VA (VVF) Wire Cutting Capacity(φ/mm) |
| With/without tip claw replacement function |
| Tip claw diameter(mm) |
| Compatible Ring Size(mm) |
| Parts Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | WIHA | WIHA | WIHA | WIHA | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | TONE | HOZAN | HOZAN | HOZAN | HOZAN | MUROMOTO TEKKO | MUROMOTO TEKKO | MUROMOTO TEKKO | 3PEAKS | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 7 Day(s) or more | 11 Day(s) | 11 Day(s) | 7 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) or more | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) or more | 5 Day(s) or more | 8 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Product Category | Pliers | Pliers | Pliers | Pliers | Pliers / Parts | Pliers | Nippers | Nippers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Nippers | Pliers / Parts | Pliers | Nippers / Parts | Pliers | Nippers | Nippers | Pliers | Pliers | Pliers | Nippers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Nippers | Pliers | Pliers |
| Plier Type | Retaining Ring Pliers | Retaining Ring Pliers | Retaining Ring Pliers | - | - | - | - | - | - | - | - | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | - | - | Pliers | - | - | - | - | Pliers | - | - | - | - | - | - | - | - | - | - | - | - | Pliers | - |
| Plier Type | - | - | - | Pliers | Pliers | Pliers | - | - | Longnose pliers | Pliers | Pliers | - | - | - | - | - | - | - | - | - | - | - | - | - | Longnose pliers | - | - | Pliers | - | - | - | Pliers | Longnose pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | - | - | Pliers |
| Nipper Type | - | - | - | - | - | - | Nippers | Nippers | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Nippers | - | - | Nippers | - | Nippers | Nippers | - | - | - | - | - | - | - | - | - | - | - | - | Nippers | - | - |
| Overall Length(mm) | 140 ～ 300 | - | - | 160 ～ 200 | - | 170 | 122 | 123 | 160 | 175 | 145 | 150 ～ 200 | 202 | 188 ～ 224 | 105 ～ 224 | 192 ～ 224 | 123 ～ 164 | 170 ～ 455 | 170 ～ 250 | 250 ～ 455 | 235 | 185 | - | 160 | 150 ～ 163 | 165 | 133 | 236 | 230 | 150 ～ 185 | 150 ～ 215 | 160 | 172 | 132 | 180 ～ 225 | 180 ～ 225 | 225 | 140 ～ 200 | 140 ～ 250 | 160 ～ 200 | 240 | 160 | 160 | 130 | 125 ～ 180 |
| Shaft/hole | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With or without Spring | - | - | - | - | - | Available | Available | Available | NA | Available | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | Available | - | Available | NA | NA | NA | NA | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Steel Wire Cutting Performance(φ/mm) | - | - | - | 3 ～ 3.6 | - | - | - | - | - | - | - | 2 ～ 2.6 | 2.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4 | 3 | 1.5 ～ 1.6 | - | - | 1.5 | 1.6 | - | - | - | - | - | - | - | - | - | - | - |
| Copper Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | 0.6 | 0.8 | 2.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.6 | - | 1.6 | 5 | 4 | 2 ～ 3 | - | - | 2.6 | 2 | 11.5 ～ 14 | 11.5 ～ 14 | 14 | 9 ～ 13 | 9 ～ 15 | 10 ～ 13 | - | - | - | - | - |
| Piano Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 ～ 2.5 | 2 ～ 2.5 | 2.5 | - | - | - | - | - | - | - | - |
| Plastic Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stranded Wire Cutting Ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stainless steel cutting ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| VA (VVF) Wire Cutting Capacity(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.6X3 core | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With/without tip claw replacement function | NA | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | NA | - | - | - | - | - | - | - | - | - | - | - |
| Tip claw diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Ring Size(mm) | 3-8 ～ 85-140 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Parts Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Spring | - | Spring | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Product Category
-
Plier Type
-
Plier Type
-
Nipper Type
-
Overall Length(mm)
- 36
- 46
- 100
- 102
- 102.5
- 104
- 105
- 106
- 108
- 109
- 110
- 111.5
- 112
- 112.5
- 113.5
- 115
- 116
- 117
- 117.5
- 118
- 120
- 122
- 123
- 124
- Approx. 124
- 125
- 125.5
- 126
- 127
- 128
- 128.5
- 129
- 130
- 131
- 132
- 132.5
- 133
- 133.5
- 134
- 134.5
- 135
- 135.5
- 136
- Approx. 136
- 137
- 138
- Approx. 138
- 139
- 140
- 141
- 142
- 143
- 144
- 144.5
- 145
- 146
- 146.5
- 147
- 148
- 149
- Approx. 149
- 150
- 151
- 152
- Approx. 152
- 152.5
- 153
- 154
- 154.5
- 155
- 155.5
- 156
- Approx. 156
- 157
- 158
- 158.5
- 159
- 160
- Approx. 160
- 161
- 162
- 163
- Approx. 163
- 164
- 165
- 166
- 167
- 167.5
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 183
- 185
- 186
- 187
- 187.5
- 188
- 189
- 190
- 192
- 193
- 194
- 195
- 197
- 199
- 200
- Approx. 200
- 201
- 201.5
- 202
- 203
- 204
- 205
- 206
- 207
- 208
- 210
- 212
- 213
- 214.5
- 215
- 216
- 217
- 219
- 220
- 223
- 223.5
- 224
- 225
- 227
- 228
- 229
- 230
- 232
- 235
- 236
- 240
- 241
- 242
- 245
- 249
- 250
- 252
- 253
- 260
- 265
- 266
- 275
- Approximately 275
- 280
- 285
- Approximately 285
- 287
- 290
- 297
- 300
- 305
- 310
- 320
- 370
- 380
- 400
- 443
- 455
- 465
- 560
- 570
- 580
- 590
- 600
- 620
- 770
- 920
-
Shaft/hole
-
With or without Spring
-
Steel Wire Cutting Performance(φ/mm)
- 0.18-1.9
- 0.18-1.6
- 0.2 to 0.9
- 0.3-2.6
- 0.5
- 0.6
- 0.8
- 0.8 (Soft Iron Wire)
- 0.8×1.2
- Tip blade: 0.8 or less, Side blade: 1.2 or less
- 0.9
- 1
- 1.2
- 1.2 (Soft Iron Wire)
- Approx. 1.3
- 1.4
- 1.5
- 1.6
- 1.6 (soft iron wire)
- 1.8
- 1.9
- 2
- 2.15
- 2.2
- 2.3 (soft iron wire)
- 2.4
- 2.5
- 2.6
- 2.75
- 2.8
- 3
- 3..5
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.8
- 5
- 5.5
- -
- Cannot cut
-
Copper Wire Cutting Performance(φ/mm)
- 0.10～0.60
- 0.10～0.65
- 0.1～0.80
- 0.10～0.80
- 0.1 to 1.00
- 0.10 to 1.00
- 0.1～1.25
- 0.10～1.25
- 0.13-1.2
- 0.18-1.6
- 0.18～0.8
- 0.2～0.80
- 0.20～0.80
- 0.2～1.00
- 0.20～1.00
- 0.2～1.20
- 0.20～1.20
- 0.20～1.25
- 0.2～1.60
- 0.20～1.60
- 0.2 to 2
- 0.2 to 2.3
- 0.3～1.60
- 0.30～1.60
- 0.3～2.00
- 0.30～2.00
- 0.35～0.80
- 0.35～1.00
- 0.35 to 1.25
- 0.4～2.00
- 0.40～2.00
- 0.5
- 0.6
- 0.8
- 0.9
- 1
- 1.00～0.80
- 1.2
- Tip blade: 1.2 or less, Side blade: 1.2 or less
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.8
- 2
- 2.3
- 2.5
- 2.6
- 2.8
- 2.9
- 3
- 3.2
- 3.3
- 3.5
- 3.6
- 4
- 4.5
- 5
- 7.0
- 8.0
- 9
- 10
- 11.5
- 12
- 13
- 14
- 15
- -
-
Piano Wire Cutting Performance(φ/mm)
-
Plastic Cutting Performance(φ/mm)
- 1
- 1.5
- 2
- 3
- 4
- 5
- 5.0(ABS resin)
- 6
- 6.0(ABS resin)
- 8
- 9
- 10
-
Stranded Wire Cutting Ability(φ/mm)
-
Stainless steel cutting ability(φ/mm)
-
VA (VVF) Wire Cutting Capacity(φ/mm)
-
With/without tip claw replacement function
-
Tip claw diameter(mm)
- 0.5–0.7
- 0.8
- 0.9
- 1.25
- 1.3
- Tip diameter (ømm): 1.3
- 1.4
- 1.7
- 1.8
- Tip diameter (ømm): 1.8
- 2
- 2.0～2.4
- 2.25
- 2.3
- 2.5
- 3.2
- 3.4
- 3.5
- 4.4
- 4.5
- 16.5
-
Compatible Ring Size(mm)
-
Parts Type
Narrow search by specifying Manufacturer
-
- ESCO (378)
- KNIPEX (244)
- MUROMOTO TEKKO (92)
- FUJIYA (63)
- HOZAN (42)
- TSUNODA (40)
- TOP (40)
- TRUSCO NAKAYAMA (38)
- ENGINEER (37)
- KTC(KYOTO TOOL) (34)
- 3PEAKS (29)
- KEIBA (27)
- WIHA (25)
- TONE (21)
- LOBTEX (18)
- MITOLOY (14)
- HANAZONO TOOL (10)
- IGARASHIPLIERS (10)
- SMATO (9)
- ARC (8)
- Ｍ＆Ｍ (8)
- SUPER TOOL (8)
- E VALUE (7)
- GRIPONTOOLS (7)
- LINDSTROM (7)
- SIGNET (7)
- SK 11 (7)
- TGK (5)
- AS ONE (4)
- ARC GREATTOOL (3)
- HAZET (3)
- TRAD (3)
- GOOT (2)
- HANDIWORK (2)
- NEPROS (2)
- ANEX (1)
- BESTTOOL (1)
- H & H (1)
- PROZONE (1)
CAD
-
- 2D
- 3D
Related Categories to Pliers/Nippers/Pincers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy