(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
SUMIBORON Insert C (80° Diamond) 2NC-CCGT-N-FV (Part Numbers)
[Features]
· Original CBN sintered tool (SUMIBORON) insert.
· High hardness and excellent heat-resistant properties.
| Part Number |
|---|
| 2NCCCGT09T304NFVBNC2010 |
| 2NCCCGT09T304NFVBNC2020 |
| 2NCCCGT09T308NFVBNC2010 |
| 2NCCCGT09T308NFVBNC2020 |
| 2NCCCGT060204NFVBNC2010 |
| 2NCCCGT060204NFVBNC2020 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Nose Radius | Material Type | Inscribed circle (mm) | Thickness (mm) | Cutting Edge Length (mm) | Hole Diameter (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 365.53 | 1 Piece(s) | 10 Day(s) or more | 0.4 | BNC2010 | ø9.525 | 3.97 | 2.4 | ø4.4 | ||
MYR 365.53 | 1 Piece(s) | 10 Day(s) or more | 0.4 | BNC2020 | ø9.525 | 3.97 | 2.4 | ø4.4 | ||
MYR 365.53 | 1 Piece(s) | 10 Day(s) or more | 0.8 | BNC2010 | ø9.525 | 3.97 | 2.3 | ø4.4 | ||
MYR 365.53 | 1 Piece(s) | 10 Day(s) or more | 0.8 | BNC2020 | ø9.525 | 3.97 | 2.3 | ø4.4 | ||
MYR 365.53 | 1 Piece(s) | 10 Day(s) or more | 0.4 | BNC2010 | ø6.35 | 2.38 | 2.3 | ø2.8 | ||
MYR 365.53 | 1 Piece(s) | 10 Day(s) or more | 0.4 | BNC2020 | ø6.35 | 2.38 | 2.3 | ø2.8 |
Loading...
Basic Information
| Shape | C (80° Diamond) | Work Material | High-Hardness Material | Use | Outer Diameter / Inner Diameter |
|---|---|---|---|---|---|
| No. of Usable Corners | 2 | Rake Angle | Positive | Preferred Hand | No Preferred Hand |
| Clearance Angle(°) | 7 | Specification Details | For hardened steel machining | Material | Coated SUMIBORON |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Blade Tip Replacement Tip S (Square) SCGT-R-FX
- Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○CQ "for Finishing to Intermediate Cutting / Pull-up"
- Square 90°, Positive, without Hole SPGN No Breaker "Cast Iron"
- Diamond Shape 35° / Positive With Hole VPGT
- Kyocera Turning Insert PV720 PVD Cermet (CNMG/CPMH)
- T-Max P Insert for turning, Trigon 80°, Lathe Negative Tip, WNMG080412-QM-1105
- Standard Insert, 90° Square-Shape, Negative, SNMN
- Standard Insert, 80° Diamond-Shape, Positive, CCGW
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy