(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Precision Metal Cutter KCM-370NESC (Part Numbers)
[Features]
· Popular large cutter in the KCM series.
· Extremely quiet, capable of precision cutting. Easily cuts stainless steel.
· Clean cutting without dust, sparks, or smells.
· Choose the height when working with the low floor model.
· Safe and good workability with low rotation speed.
· Accurately set the cutting dimension from 0 to 850 mm with the sizing and cutting device's 1 mm scale.
· Angled cutting up to 45° right and left can be set in 1° increments on the guide plate.
· Securely fasten the materials to be cut with the flexing prevention structure.
· Saw blade support shaft is highly rigid, making stable cutting work possible.
· Prevents saw clogging with the unique chip remover.
· Excellent operability, with the switch on the side of the saw blade head.
· Increase workability by using a sub-vise and machine table.
Japanese Only
Part Number
Configured Part Number is shown.
KCM-370NESC
Basic Information
| Voltage(V) | Three-phase 200 | Maximum Number of Load-Free Rotations(rpm) | 18/22 | Power Consumption(W) | 1,500 |
|---|---|---|---|---|---|
| Constant Dimension Stopper(mm) | 0 to 850 | Angle cutting(°) | Left/Right 90 to 45 | Flange dimensions | P.C.D ø66 to ø10 × 4 |
| Machine Dimensions(mm) | 700 × 985 × 1,300 | Coolant Pump Output (50/60 Hz)(W) | 40 | Coolant Tank Capacity(L) | Approx. 25 |
| Cutting Fluid | Use dedicated cutting fluid for this machine diluted with approximately 20 parts water | Accessory | Dedicated cutting fluid (1 L container), metal saw × 1, single-ended wrench 27 mm, hex wrench 5/8/10 mm, dedicated brush, grounded 3P 20 A plug × 1 of each | Mass(kg) | Approx. 250 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Benchtop Circular Saw K-210 Replacement Parts (Disk Cutter)
- Tabletop Portable All-Purpose Sawing Machine
- Pipe Cutter Beaver SAW P400
- Pipe Cutter Beaver Saw Replacement Blade
- Beaver Saw Dedicated Separately Sold Product Pipe Support
- Bolt Cutter (Offset Type)
- Spare Blade (For EA545BH-1 to 7)
- Small Screws Cutter set EA545AK-100
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy