(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
PCLN Type (External Diameter/End-Face Machining) (Part Numbers)
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard
Part Number
Configured Part Number is shown.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Preferred Hand | Shank Height (mm) | Link Width (mm) | B (mm) | F1 (mm) | F2 (mm) | H1=h (mm) | L1 (mm) | L2 (mm) | Sheet | Wrench | Lever | Lock Screw | Shim Pin | Punch |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 396.31 | 1 Piece(s) | 10 Day(s) | Left Handed | 16 | 16 | 16 | 20 | 14 | 16 | 100 | 22 | LC-32N | FH-2.5 | LL-1N | LS-1N | LSP-1 | PC-1 | ||
MYR 416.50 | 1 Piece(s) | 10 Day(s) | Left Handed | 20 | 20 | 20 | 25 | 15 | 20 | 125 | 22 | LC-32N | FH-2.5 | LL-1N | LS-1N | LSP-1 | PC-1 | ||
MYR 416.50 | 1 Piece(s) | 10 Day(s) | Left Handed | 20 | 20 | 20 | 25 | 20 | 20 | 125 | 27 | LC-42N | LW-3 | LL-2N | LS-2N | LSP-2 | PC-2 | ||
MYR 452.80 | 1 Piece(s) | 10 Day(s) | Left Handed | 25 | 25 | 25 | 32 | 18 | 25 | 150 | 22 | LC-32N | FH-2.5 | LL-1N | LS-1N | LSP-1 | PC-1 | ||
MYR 452.80 | 1 Piece(s) | 10 Day(s) | Left Handed | 25 | 25 | 25 | 32 | 20 | 25 | 150 | 27 | LC-42N | LW-3 | LL-2N | LS-2N | LSP-2 | PC-2 | ||
MYR 452.80 | 1 Piece(s) | 10 Day(s) | Left Handed | 25 | 25 | 25 | 32 | 25 | 25 | 150 | 32 | LC-53N | LW-3 | LL-5N | LS-4N | LSP-3 | - | ||
MYR 391.55 | 1 Piece(s) | 6 Day(s) or more | Right Handed | 16 | 16 | 16 | 20 | 14 | 16 | 100 | 22 | LC-32N | FH-2.5 | LL-1N | LS-1N | LSP-1 | PC-1 | ||
MYR 416.50 | 1 Piece(s) | 10 Day(s) | Right Handed | 20 | 20 | 20 | 25 | 20 | 20 | 100 | 27 | LC-42N | LW-3 | LL-2N | LS-2N | LSP-2 | PC-2 | ||
MYR 416.50 | 1 Piece(s) | 10 Day(s) | Right Handed | 20 | 20 | 20 | 25 | 15 | 20 | 125 | 22 | LC-32N | FH-2.5 | LL-1N | LS-1N | LSP-1 | PC-1 | ||
MYR 416.50 | 1 Piece(s) | 10 Day(s) | Right Handed | 20 | 20 | 20 | 25 | 20 | 20 | 125 | 27 | LC-42N | LW-3 | LL-2N | LS-2N | LSP-2 | PC-2 | ||
MYR 452.80 | 1 Piece(s) | 10 Day(s) | Right Handed | 25 | 25 | 25 | 32 | 18 | 25 | 150 | 22 | LC-32N | FH-2.5 | LL-1N | LS-1N | LSP-1 | PC-1 | ||
MYR 452.80 | 1 Piece(s) | 10 Day(s) | Right Handed | 25 | 25 | 25 | 32 | 20 | 25 | 150 | 27 | LC-42N | LW-3 | LL-2N | LS-2N | LSP-2 | PC-2 | ||
MYR 452.80 | 1 Piece(s) | 10 Day(s) | Right Handed | 25 | 25 | 25 | 32 | 25 | 25 | 150 | 32 | LC-53N | LW-3 | LL-5N | LS-4N | LSP-3 | - | ||
MYR 533.43 | 1 Piece(s) | 10 Day(s) | Right Handed | 32 | 32 | 25 | 32 | 20 | 32 | 170 | 27 | LC-42N | LW-3 | LL-2N | LS-2N | LSP-2 | PC-2 | ||
MYR 533.43 | 1 Piece(s) | 10 Day(s) | Right Handed | 32 | 32 | 32 | 40 | 27 | 32 | 170 | 32 | LC-53N | LW-3 | LL-5N | LS-4N | LSP-3 | - |
Loading...
Basic Information
| Applicable Tip Shape | C (80° Diamond) | Use | Major Diameter / End Surface | Clamp Shape | Lever Lock |
|---|---|---|---|---|---|
| Applicable Chip Clearance Angle | Negative | Reference Corner R (rε) | 0.8 |
Specification/Dimensions
-
Preferred Hand
- Right Handed
- Left Handed
-
Shank Height(mm)
-
Link Width(mm)
-
B(mm)
- 16
- 20
- 25
- 32
-
F1(mm)
-
F2(mm)
-
H1=h(mm)
- 16
- 20
- 25
- 32
-
L1(mm)
-
L2(mm)
-
Sheet
- LC-53N
- LC-42N
- LC-32N
-
Wrench
-
Lever
-
Lock Screw
-
Shim Pin
- LSP-3
- LSP-2
- LSP-1
-
Punch
- PC-2
- PC-1
-
type
- PCLNL1616H-09
- PCLNL2020K-09
- PCLNL2020K-12
- PCLNL2525M-09
- PCLNL2525M-12
- PCLNL2525M-16
- PCLNR1616H-09
- PCLNR2020H-12*
- PCLNR2020K-09
- PCLNR2020K-12
- PCLNR2525M-09
- PCLNR2525M-12
- PCLNR2525M-16
- PCLNR3225P-12
- PCLNR3232P-16
Days to Ship
-
- All
- 6 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- SEC-30 Type Bit ETGN Type
- SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)
- SEC-D Type Tool Bit, DSBN Type
- Sumiboron Round Tip Bite PRDC Type
- SUMIBORON, Round Insert Tool Bit, PRGN Type
- Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDNCN-E11
- Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13JCR/L
- Holder For Front-Turning, SCLC-N-F
Customers Who Viewed This Item Also Viewed
-
SEC-70 Type Tool Bit PCLN Type (Cutting Direction: Right)SUMITOMO_ELEC_
Standard Price : MYR 381.67-
Days to Ship : 7 Day(s) or more
-
-
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing"KYOCERA
Standard Price : MYR 50.55-
Days to Ship : 4 Day(s) or more
-
S-SCLC-A Type Steel Bar (inner diameter, inner end surface machining)KYOCERA
Standard Price : MYR 601.95-
Days to Ship : 6 Day(s) or more
-
NC Starting Drills for Chamfering (90°), Coated_NC-SD-VYAMAWA MFG
Standard Price : MYR 85.93-
Days to Ship : 5 Day(s) or more
-
WTKN-N Type (outer diameter, end surface, profile machining)KYOCERA
Standard Price : MYR 508.31-
Days to Ship : 10 Day(s)
-
60° Triangle Negative with Hole TNGG16○○-S "Finishing"KYOCERA
Standard Price : MYR 26.79-
Days to Ship : 4 Day(s) or more
-
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting"KYOCERA
Standard Price : MYR 25.52-
Days to Ship : 4 Day(s) or more
-
Turning Insert Diamond 80°, Negative, with Hole, CNMG1204○○AH "for Intermediate to Rough Cutting / with Honing" for Aluminum / Nonferrous Metals
KYOCERA
Standard Price : MYR 54.41
Days to Ship : 6 Day(s) or more
-
60° Triangle Negative with Hole TNGG16○○-B "Finishing to Medium"
KYOCERA
Standard Price : MYR 35.72-
Days to Ship : 4 Day(s) or more
-
Inner Diameter Thread Cutting Tip 11IR/L○○ISO-TFKYOCERA
Standard Price : MYR 54.94
Days to Ship : 6 Day(s) or more
-
EX-GOLD Drills Regular with Internal Coolant Supply_EX-HO-GDROSG
Standard Price : MYR 436.54-
Days to Ship : 2 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy