(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
CC-Link/LT Analog Output Unit (Part Numbers)
CC-Link/LT analog output unit for an on-board/on-equipment wire saving network.
[Features]
· Analog output unit for general-purpose sequencer.
· Conversion of analog input signal to digital values, and for conversion of digital values to analog output signal.
· The number of input/output points (occupied stations) varies by the last channel permitted for conversion.
· The number of input/output points (occupied stations) can be reduced.
· A dedicated flat cable is directly attached to the unit (50 cm).
[Applications]
· Network communication.
Part Number
Configured Part Number is shown.
CL2DA2-B
CC-Link/LT Analog Unit Terminal Block Type Analog Output Unit Specifications
CL2DA2-B external appearance
CL2DA2-B dimensional drawing, unit: mm
| Analog Output Points | 2 points (2 channels) | ||
|---|---|---|---|
| Digital Input | Voltage: -4,096 to +4,095 Current: -96 to +4,095 | ||
| Analog Output | Voltage | -10 to +10 V DC (external load resistance: 1 kΩ to 1 MΩ) | |
| Current | 0 to 20 mA DC (external load resistance: 0 to 600 Ω) | ||
| Input/Output Characteristics, Resolution | Output Range | Digital Input Value (Maximum Resolution) | |
| Voltage Output | 0 To 5 V | 0 to 4,000 (1.25 mV) | |
| 1 To 5 V | 0 to 4,000 (1 mV) | ||
| 0 To 10 V | 0 to 4,000 (2.5 mV) | ||
| -10 To 10 V | -4,000 to 4,000 (2.5 mV) | ||
| Current Output | 0 To 20 mA | 0 to 4,000 (5 μA) | |
| 4 To 20 mA | 0 to 4,000 (4 μA ) | ||
| Precision (Precision With Respect To Maximum Analog Output Value) | Ambient Temperature: 25±5°C | ±0.2% | |
| Ambient Temperature: 0 To 55°C | ±0.4% | ||
| Temperature Coefficient | ±80 ppm/°C (0.0080%/°C） | ||
| D/A Conversion Speed | 200 μs / 2 channels | ||
| Absolute Maximum Output | Voltage | ±12 V | |
| Current | 21 mA | ||
| Output Short-Circuit Protection | Available | ||
| Isolation Method | Between communication system and all analog outputs at once: photocoupler insulation, transformer insulation Between power supply system and all analog outputs at once: photocoupler insulation, transformer insulation Between communication system and power supply system: photocoupler insulation, transformer insulation Between channels: non-insulation | ||
| Dielectric Strength | Between communication system and all analog outputs at once, between power supply system and all analog outputs at once, between communication system and power supply system: 500 V AC for 1 minute | ||
| Insulation Resistance | Between communication system and all analog outputs at once, between power supply system and all analog outputs at once, between communication system and power supply system: 10 MΩ or more at 500 V DC | ||
| Protection Grade | IP2X | ||
| Number Of Occupied Stations | 2 stations in 16-point mode | ||
| Unit Power Supply | Voltage | 24 V DC (20.4 to 28.8 V DC, Ripple Ratio within 5%) | |
| Current | 170 mA | ||
| Current At Startup | 470 mA | ||
| External Wiring Connection Method | 14-point Direct Attachment Terminal Block (M3 Screw) | ||
| Mass | 0.15 kg | ||
| Ambient Operating Temperature | 0 to 55℃ | ||
|---|---|---|---|
| Ambient Storage Temperature | -25 to 75℃ | ||
| Ambient Operating Humidity | 5 to 95% RH, assuming no condensation | ||
| Ambient Storage Humidity | 5 to 95% RH, assuming no condensation | ||
| Vibration Resistance | JIS B 3502, IEC 61131-2 Compliant | Under Intermittent Vibration | Frequency: 5 to 8.4 Hz, Amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Acceleration: 9.8 m/s2 Sweeps: 10 sweeps each in X, Y and Z directions |
| Under Continuous Vibration | Frequency: 5 to 8.4 Hz, Amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Acceleration: 4.9 m/s2 | ||
| Impact Resistance | Conforms to JIS B 3502, IEC 61131-2 (147 m/s2, 3 sweeps in 3 directions of X, Y and Z) | ||
| Operating Atmosphere | No corrosive gas | ||
| Operating Altitude | 0 to 2,000 m | ||
| Installation Location | Inside the control panel | ||
| Overvoltage Category | II or lower | ||
| Pollution Degree | 2 or less | ||
| Part Number |
|---|
| CL2DA2-B |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS |
|---|---|---|---|---|---|
MYR 99,999.00 | 1 Piece(s) | Quote | 6 |
Loading...
Basic Information
| Type | Output | A/D Conversion Speed (Conversion Time) | 100 to Less Than 500 μS | Terminal shape | Terminal Block |
|---|---|---|---|---|---|
| Representative Standard | CE / UL | Voltage output range | DC-10 to 10V | Current output range | DC 0–20 mA |
Specification/Dimensions
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- CC-Link Analog Input/Output (Input) Unit
- Process input unit CS1W-P
- CJ series analog input/output unit
- Process Input/Output Unit CJ1W-PH41U / AD04U
- NX Series Load Cell Input Unit NX-RS□□□
- CC-Link IE Field Network Block Type Remote Unit NZ2GN Series (Analog Input/Output)
- Input/Output Module, CPX Series
- CC-Link Analog Input Module
Customers Who Viewed This Item Also Viewed
-
CC-Link Digital/Analog Conversion Unit Screw Terminal Block TypeMITSUBISHI
Standard Price : MYR 1,921.67-
Days to Ship : 4 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy