(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Jaws (for Inner Diameter Clamping) (CP127) (Part Numbers)
- Volume Discount
The wedge of the expansion bolt spreads the base in 8 directions, securely clamping the workpiece, and it can handle a wide variety of irregularly shaped workpieces. With a clamping stroke of 0.3 mm in diameter, it is suitable for lost wax, die-cast, extruded materials, drawn materials, pre-processed workpieces, etc. [Applications]·Inner diameter clamp base for CP125
Part Number
Configured Part Number is shown.
Drawing
Product Specification
- This is a RoHS directive compliant product.
- Mouthpiece: A7075, anodized surface treatment, silver
- Accessory: o-ring···1 pc.
Specifications Table
Usage Example
(1) Mounting the die (for inner diameter clamp)
· Install the o-ring into the groove on the top surface of the form clamp.
· Set the die so that the straight pin fits into the positioning hole of the die, and secure it with the expansion bolt (for inner diameter clamp).
Note: When mounting the die, make sure the cam shaft is fully loosened (turned counterclockwise until it stops).
(2) Self-cutting the die
2-1. Measure the diameter of the self-cutting section with the cam shaft fully loosened. Then, tighten and fix the cam shaft so that the processed section expands by 0.3 mm in diameter.
2-2. Self-cut the jaws to match the shape of the workpiece.
(Please perform self-cutting of the jaws within the allowable self-cutting range.)
(3) Setting the workpiece
After self-cutting, loosen the cam shaft, set the workpiece, then turn the cam shaft again to clamp it.
Product Feature Details
- The wedge of the expansion bolt spreads the jaws in eight directions, securely clamping the workpiece and accommodating a wide variety of irregularly shaped workpieces.
- The clamping stroke is 0.3 mm in diameter. Suitable for lost wax, die-cast, extruded material, drawn material, and pre-processed workpieces.
(1) When the cam shaft is tightened, the expansion bolt is retracted.
(2) At the same time, the jaws expand outward in eight directions from the center, clamping the inner shape of the workpiece.
Performance / Test Information
Performance curve
Cautions and Prohibitions
- To prevent damage and deformation, do not perform tightening without the workpiece. In addition, tightening beyond the allowable tightening torque will significantly reduce the durability of the jaws.
| Part Number |
|---|
| CP127-06501 |
| CP127-12001 |
| CP127-16001 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable form clamp | Applicable external clamp |
|---|---|---|---|---|---|---|---|
MYR 1,010.69 | 1 Piece(s) | Available | 5 Day(s) or more | 10 | CP125-06501 | CP127-06501B | |
MYR 2,273.12 | 1 Piece(s) | 9 Day(s) | 10 | CP125-12001 | CP127-12001B | ||
MYR 3,247.39 | 1 Piece(s) | 9 Day(s) | 10 | CP125-16001 | CP127-16001B |
Loading...
Basic Information
| Clamp Type | Related Part |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Block Type External Clamp (CP124)
- Inner Diameter Clamp (CP130)
- Form Clamp (CP125)
- Taper Bolt Used for The ID Clamp
- Use for Side Lock Adapter Lathe
- External Shape Clamp (CP120)
- Mouthpiece (CP121)
- Adapter for External Clamp Lathe (CP122)
Customers Who Viewed This Item Also Viewed
-
-
-
Compact Inner Diameter Clamp (CP131)IMAO
Standard Price : MYR 140.86-
Days to Ship : 2 Day(s) or more
-
Jaws (for external shape clamping) (CP126)IMAO
Standard Price : MYR 1,407.17-
Days to Ship : 8 Day(s) or more
-
External Shape Clamp (Small Diameter Type) (CP123)IMAO
Standard Price : MYR 1,257.90-
Days to Ship : 8 Day(s) or more
-
-
Extension Bolt (Use for Inside Clamp)IMAO
Standard Price : MYR 159.91-
Days to Ship : 5 Day(s) or more
-
-
-
-
Coaxial Vertical Pseudo Lighting IFV SeriesIMAC
Standard Price : MYR 2,734.61-
Days to Ship : 13 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy