Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Smart Fiber Amplifier E3NX-FA (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

It is an [Advanced] fiber amplifier with a difference in on-site response. Detection distance: 2 basic performances of 1.5 times, minimum detection object: about 1/10 times, have improved.

[Features]
· Detection distance: 2 basic performances of 1.5 times, minimum detection object: about 1/10 times*, have improved.
· Easy setting [Smart tuning] with advanced light volume adjustment range of 40,000 times
· Even with saturation of the amount of received light, it is optimized by light quantity adjustment and stable detection is achieved. Provision for high visibility [white display].
· Difference between passing time and light receiving amount are visible[Solution viewer] and is reliable with [Change finder] where display value of high speed work can be seen

Part Number

Configured Part Number is shown.

Product Specifications
Part Numbers
Catalog

Drawing

Pre-Wired Type

*Cord specifications

Part number	Outer diameter	Number of wires	Others
Model E3NX-FA11 (-5)	⌀4.0	3 contacts	Conductor cross-sectional area: 0.2 mm² Insulator diameter: ⌀0.9 mm Standard length: 2 m Minimum bending radius: 12 mm
Model E3NX-FA41
Model E3NX-FAH*1
Model E3NX-FA*1AN
Model E3NX-FA21	⌀4.0	5 Pins
Model E3NX-FA51	⌀4.0	5 Pins

Reduced wiring connector type

Smart fiber amplifier E3NX-FA, wire saving connector type, drawing

*Cord specifications

Part number	Outer diameter	Number of wires
E3X-CN12	⌀2.6	Simplex
E3X-CN22	⌀4.0	2 contacts
E3X-CN11		3 contacts
Model E3X-CN21		4 contacts

M8 connector type

Connector type for sensor communication unit

Product Specification

Standard type, high-performance type, infrared type

Items	Type	Standard			High-function					Infrared Type
	NPN output	Model E3NX-FA11	Model E3NX-FA6	Model E3NX-FA11-5*1	Model E3NX-FA21	Model E3NX-FA7	Model E3NX-FA7TW	Model E3NX-FA24	-	Model E3NX-FAH11	Model E3NX-FAH6
	PNP output	Model E3NX-FA41	Model E3NX-FA8	-	Model E3NX-FA51	Model E3NX-FA9	Model E3NX-FA9TW	Model E3NX-FA54	Model E3NX-FA54TW	Model E3NX-FAH41	Model E3NX-FAH8
	Connection method	Pre-wired	Connector for simplified wiring	Pre-wired	Pre-wired	Connector for simplified wiring		M8 Connector		Pre-wired	Connector for simplified wiring
Input/output	Output	1 output			2 output	1 output	2 output	1 output	2 output	1 output
Input/output	External input	-			1 input	1 input	-	1 input	-	-
Light source (emission wavelength)		Red 4-element light emitting diode (625 nm)								Infrared emitting diode (870 nm)
Power supply voltage		10 to 30 V DC, including 10% ripple (pp)
Power consumption*2		At 24 V power supply voltage [Standard type] Normal mode: 840 mW or less (current consumption 35 mA or less), Eco function ON: 650 mW or less (current consumption 27 mA or less), Eco function LO: 750 mW or less (current consumption 31 mA or less) [High-performance type / Sensor communication unit type] Normal mode: 920 mW or less (current consumption: 38 mA or less), Eco function ON: 680 mW or less (current consumption: 28 mA or less), Eco function LO: 800 mW or less (current consumption: 33 mA or less) [Infrared Type] Normal mode: 1080 mW or less (current consumption: 45 mA or less) Eco mode ON: 920 mW or less (current consumption 38 mA or less), Eco mode LO: 1020 mW or less (current consumption 42 mA or less)
Control output		Load power supply voltage: 30 V DC or less, open collector output type (varies depending on NPN/PNP output type) Load current: 100 mA or less when connecting 1 to 3 units, 20 mA or less when connecting 4 or more units (residual voltage, less than 10 mA load current: 1 V or less, 10 to 100 mA load current: 2 V or less) Off-state current: 0.1 mA or less
External input		-			See *3		-	See *3	-
Indicator light		7-segment display (sub-digital display: green, main digital display: white) Display direction: Normal / reverse display switchable OUT indicator light (orange), L/D indicator light (orange), ST indicator light (blue), DPC indicator light (green) OUT selection indicator light (orange) (2 output only)
Protection circuit		Power supply reverse connection protection, output short circuit protection, output reverse connection protection
Response time	Fastest mode (SHS)	Operation and recovery: 30 μs each for single output type (60 μs each in fastest mode (SHS2) for model E3NX-FA11-5) 32 μs each for dual output type
	High-speed mode (HS)	Operation and recovery: 250 μs each
	Standard mode (Stnd)	Operation and recovery: 1 ms each
	Giga Power mode (GIGA)	Operation and recovery: 16 ms each
Sensitivity Adjustment		Smart tuning (2-point tuning, full auto tuning, positioning tuning, maximum sensitivity tuning, power tuning, percent tuning (-99% to +99%)) or manual adjustment
Maximum number of units that can be connected		30 units
Mutual interference prevention units*4	Fastest mode (SHS)	0 units Note: When the detection function is set to the fastest mode (SHS2), the E3NX-FA11-5 model supports 2 units. When other models are set to the fastest mode (SHS), the mutual interference prevention function is disabled.
	High-speed mode (HS)	10 units
	Standard mode (Stnd)	10 units
	Giga Power mode (GIGA)	10 units
function	Auto power control (APC)	Available (always enabled)
	Dynamic power control (DPC)	available
	Timer	Selectable from timer function disabled, off-delay, on-delay, one-shot, and on/off-delay. 1 ms to 9,999 ms
	Zero reset	Negative display possible (The threshold also shifts)
	Reset settings*5	Selectable from initial reset (factory default) and user reset (saved state)
	Eco mode*6	Selectable from OFF (digital display lit), ECO ON (digital display off), and ECO LO (digital display dimly lit)
	Bank switching settings	Selectable from BANK1 to 4
	Power tuning at the time of shipment	Selectable from ON/OFF and execute at power start								Selectable from ON/OFF
	Output 1 Settings	Selectable from normal detection mode, area detection mode, and differential detection mode								Selectable from normal detection mode, area detection mode
	Output 2 settings	-			Normal detection mode, alarm output mode, error output mode, differential detection mode can be selected	-	Normal detection mode, alarm output mode, error output mode, differential detection mode can be selected	-	Normal detection mode, alarm output mode, error output mode, differential detection mode can be selected	-
	External input settings	-			Input OFF, tuning, power tuning, light emission OFF, zero reset, BANK switching can be selected		-	Input OFF, tuning, power tuning, light emission OFF, zero reset, BANK switching can be selected	-
	Hysteresis width setting	Selectable from standard settings or user settings. In case of user settings, hysteresis width can be set from 0 to 9,999
Operating ambient illuminance		Light receiving surface illuminance, Incandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or less
Ambient temperature range*7		During operation: When connecting 1 to 2 units: -25°C to +55°C, When connecting 3 to 10 units: -25°C to +50°C, When connecting 11 to 16 units: -25°C to +45°C, When connecting 17 to 30 units: -25°C to +40°C When storing: -30 to +70°C (no freezing or condensation)
Ambient humidity range		When operating/storing: 35 to 85% RH each in the above ambient temperature range (no condensation)
High		2,000 m or less
Installation environment		Pollution Level 3
Insulation resistance		20 MΩ or more (500 V DC insulation resistance tester)
Withstand voltage		1,000 V AC 50/60 Hz for 1 min
Vibration (endurance)		10 to 55 Hz, 1.5 mm double amplitude, 2 hours in each direction of X, Y, and Z
Shock (endurance)		500 m/s² in Each X, Y, Z Direction 3 times
Weight (packaging state/main body only)		approx. 115 g/ approx. 75 g	approx. 60 g/ approx. 20 g	approx. 115 g/ approx. 75 g	approx. 115 g/ approx. 75 g	approx. 60 g / approx. 20 g		approx. 65 g / approx. 25 g		approx. 115 g/ approx. 75 g	approx. 60 g/ approx. 20 g
Material	Case	Polycarbonate (PC)
	cover	Polycarbonate (PC)
	Cord	PVC
Accessory		Instruction manual

*1. In SHS2 mode, this type supports mutual interference prevention for up to two units.
*2. When the power supply voltage is 10 V to 30 V
[Standard type]
Normal mode: 990 mW or less (33 mA or less current consumption at 30 V power supply voltage / 65 mA or less current consumption at 10 V power supply voltage)
Eco function ON: 780 mW or less (26 mA or less current consumption at 30 V power supply voltage / 42 mA or less current consumption at 10 V power supply voltage)
Eco function LO: 840 mW or less (28 mA or less current consumption at 30 V power supply voltage / 45 mA or less current consumption at 10 V power supply voltage)
[Advanced Function Type]
Normal mode: 1,020 mW or less (34 mA or less current consumption at 30 V power supply voltage / 67 mA or less current consumption at 10 V power supply voltage)
Eco function ON: 810 mW or less (27 mA or less current consumption at 30 V power supply voltage / 44 mA or less current consumption at 10 V power supply voltage)
Eco function LO: 870 mW or less (29 mA or less current consumption at 30 V power supply voltage / 48 mA or less current consumption at 10 V power supply voltage)
[Infrared type]
Normal mode: 1,260 mW or less (42 mA or less current consumption at 30 V power supply voltage / 80 mA or less current consumption at 10 V power supply voltage)
Eco function ON: 1,050 mW or less (35 mA or less current consumption at 30 V power supply voltage / 60 mA or less current consumption at 10 V power supply voltage)
Eco function LO: 1,140 mW or less (38 mA or less current consumption at 30 V power supply voltage / 70 mA or less current consumption at 10 V power supply voltage)

*3. The details regarding input are as follows.

-	Contact input (relay, switch)	Non-contact input (transistor)	Input time *3-1
NPN type	When ON: short-circuit to 0 V (outflow current: 1 mA or less) When OFF: open, or short-circuit to Vcc	When ON: 1.5 V or less (outflow current: 1 mA or less) When OFF: Vcc - 1.5 V to Vcc (leakage current: 0.1 mA or less)	ON: 9 ms or more OFF: 20 ms or more
PNP type	When ON: short-circuit to Vcc (sink current: 3 mA or less) When OFF: open, or short-circuit to 0 V	When ON: Vcc - 1.5 V to Vcc (sink current: 3 mA or less) When OFF: 1.5 V or less (leakage current: 0.1 mA or less)	ON: 9 ms or more OFF: 20 ms or more

*3-1. Only when tuning or power tuning is selected by external input, both ON and OFF must be 25 ms or more.

* 4. Tuning does not change the number of units. This is the smallest number of mutual interference prevention units for the models E3NX and E3NC.
Check the number of mutual interference prevention units and response speed for each model.
* 5. BANK is not reset by user reset and is not saved by user save.
*6. The Eco function LO has been added from the July 2014 production lot.
*7. If the number of connected units is 11 or more, the ambient temperature range will be less than 50°C.

Analog output type, sensor communication unit type

Items	Type	Analog output type	For sensor communication unit
	NPN output	Model E3NX-FA11AN	Model E3NX-FA10	Model E3NX-FA0	Model E3NX-FAH0
	PNP output	Model E3NX-FA41AN	Model E3NX-FA40	Model E3NX-FA0	Model E3NX-FAH0
	Connection method	Pre-wired	For sensor communication unit Pre-wired with connector	Connection connector for sensor communication unit
Input/output	Output	2 output	1 output	- *1
Input/output	External input	-	-	- *1
Light source (emission wavelength)		Red 4-element light emitting diode (625 nm)			Infrared emitting diode (870 nm)
Power supply voltage		10 to 30 V DC, including 10% ripple (pp)	Supplied from the connector through the sensor communication unit
Power consumption*2		At 24 V power supply voltage Normal mode: 960 mW or less (current consumption: 40 mA or less) Eco mode ON: 770 mW or less (current consumption: 32 mA or less) Eco mode LO: 870 mW or less (current consumption: 36 mA or less)	At 24 V power supply voltage Normal mode: 920 mW or less (current consumption: 38 mA or less) Eco function ON: 680 mW or less (current consumption: 26 mA or less) Eco function LO: 800 mW or less (current consumption: 33 mA or less)		At 24 V power supply voltage Normal mode: 1,080 mW or less (current consumption: 45 mA or less) Eco function ON: 920 mW or less (current consumption: 38 mA or less) Eco function LO: 1020 mW or less (current consumption: 42 mA or less)
Control output		Load power supply voltage: 30 V DC or less, open collector output type (Depends on NPN/PNP output format) Load current: 100 mA or less when connecting 1 to 3 units, 20 mA or less when connecting 4 or more units (residual voltage less than 10 mA load current: 1 V or less, 10 to 100 mA load current: 2 V or less) Off-state current: 0.1 mA or less		-
Analog output (reference value)		Voltage output: DC 1–5 V (Load of 10 kΩ or more connected) Temperature characteristics: 0.3% F.S./°C	-
Indicator light		7-segment display (sub-digital display: green, main digital display: white) Display direction: Normal / reverse display switchable OUT indicator light (orange), L/D indicator light (orange), ST indicator light (blue), DPC indicator light (green) OUT selection indicator light (orange) (2 output only)
Protection circuit		Power supply reverse connection protection, output short circuit protection, output reverse connection protection		Power supply reverse connection protection, output short circuit protection
Control output Response time	Fastest mode (SHS)	Operation and recovery: 80 μs each	Operation and recovery: 32 μs each
	High-speed mode (HS)	Operation and recovery: 250 μs each	Operation and recovery: 250 μs each
	Standard mode (Stnd)	Operation and recovery: 1 ms each	Operation and recovery: 1 ms each
	Giga Power mode (GIGA)	Operation and recovery: 16 ms each	Operation and recovery: 16 ms each
Sensitivity Adjustment		Smart tuning (2-point tuning, full auto tuning, positioning tuning, maximum sensitivity tuning, power tuning, percent tuning (-99% to +99%)) or manual adjustment
Maximum number of units that can be connected		30 units	16 units	30 units when using model E3NW-ECT (When connected to the Omron NJ series) 16 units when using model E3NW-CRT (Note: Model E3NX-FAH0 cannot be connected.) 16 units when using model E3NW-CCL
Mutual interference prevention units*3	Fastest mode (SHS)	0 units (Note: When the detection function is set to the fastest mode (SHS), the mutual interference prevention function is disabled.)
	High-speed mode (HS)	10 units
	Standard mode (Stnd)	10 units
	Giga Power Mode (GIGA)	10 units
function	Auto power control (APC)	Available (always enabled)
	Dynamic power control (DPC)	available
	Timer	Selectable from timer function disabled, off-delay, on-delay, one-shot, and on/off-delay. 1 ms to 9,999 ms
	Zero reset	Negative display possible (The threshold also shifts)
	Reset settings*4	Selectable from initial reset (factory default) and user reset (saved state)
	Eco mode	Selectable from OFF (digital display lit), ECO ON (digital display off), and ECO LO (digital display dimly lit)
	Bank switching settings	Selectable from BANK1 to 4
	Power tuning settings	Selectable from ON/OFF
	Output 1 Settings	Selectable from Normal detection mode, Area detection mode, and Differential detection mode (only for models E3NX-FA10/40)
	Output 2 settings	Selectable from analog scaling, analog offset, and more	-	Selectable from Normal detection mode, Alarm output mode, Error output mode, or Differential detection mode (E3NX-FA0 model only) .
	Hysteresis width setting	Selectable from standard settings or user settings. In case of user settings, hysteresis width can be set from 0 to 9,999
Operating ambient illuminance		Light receiving surface illuminance, Incandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or less
Ambient temperature range*5		During operation: When connecting 1 to 2 units: -25°C to +55°C, When connecting 3 to 10 units: -25°C to +50°C, When connecting 11 to 16 units: -25°C to +45°C, When connecting 17 to 30 units: -25 to +40°C When storing: -30 to +70°C (no freezing or condensation )	During operation: When 1 to 2 units are connected: 0 to 55°C, When 3 to 10 units are connected: 0 to 50°C, When 11 to 16 units are connected: 0 to 45°C When storing: -30 to +70°C (no freezing or condensation )	During operation: When connecting 1 to 2 units: 0 to 55°C, When connecting 3 to 10 units: 0 to 50°C, When connecting 11 to 16 units: 0 to 45°C, When connecting 17 to 30 units: 0 to 40°C When storing: -30 to +70°C (no freezing or condensation)
Ambient humidity range		When operating/storing: 35 to 85% RH each in the above ambient temperature range (no condensation)
High		2,000 m or less
Installation environment		Pollution Level 3
Insulation resistance		20 MΩ or more (500 V DC insulation resistance tester)
Withstand voltage		1,000 V AC 50/60 Hz for 1 min
Vibration (endurance)		10 to 55 Hz, 1.5 mm double amplitude for 2 hours in each of X, Y, and Z directions
Shock (endurance)		500 m/s² X, Y, Z directions 3 times each	150 m/s² in each X, Y, Z direction 3 times
Weight (Packaging state / Main body only)		approx. 115 g / approx. 75 g	approx. 95 g / approx. 45 g	approx. 65 g / approx. 25 g	approx. 65 g / approx. 25 g
Material	Case	Polycarbonate (PC)
	cover	Polycarbonate (PC)
	Cord	PVC
Accessory		Instruction manual

* 1. 2 sensor outputs are assigned to the PLC through the network.
By operating via the PLC network, various settings can be changed and detection values can be read.
*2. When the power supply voltage is 10 V to 30 V
[Analog output type]
Normal mode: 1,080 mW or less (36 mA or less current consumption at 30 V power supply voltage / 75 mA or less current consumption at 10 V power supply voltage)
Eco function ON: 840 mW or less (28 mA or less current consumption at 30 V power supply voltage / 55 mA or less current consumption at 10 V power supply voltage)
Eco function LO: 960 mW or less (32 mA or less current consumption at 30 V power supply voltage / 65 mA or less current consumption at 10 V power supply voltage)
*3. Tuning does not change the number of units.
This is the smallest number of mutual interference prevention units for the models E3NX and E3NC. Check the number of mutual interference prevention units and response speed for each model.
*4. BANK is not reset by user reset and is not saved by user save.
*5. If the number of connected units is 11 or more, the ambient temperature range will be less than 50°C.

: 30; 60; 90

Part Number
E3NX-FA0
E3NX-FA6
E3NX-FA6M
E3NX-FA7
E3NX-FA7M
E3NX-FA7TW
E3NX-FA8
E3NX-FA9TW
E3NX-FA11 2M
E3NX-FA11 5M
E3NX-FA11AN 2M
E3NX-FA11M 2M
E3NX-FA21 2M
E3NX-FA21M 2M
E3NX-FA24
E3NX-FA41 2M
E3NX-FA51 2M
E3NX-FA54
E3NX-FAH11 2M

Standard Unit Price	Minimum order quantity	Days to Ship	Type	Detected Objects	Light Source	Amplifier Installation Type	Detection Distance [Classification] (mm)	Ambient Operating Temperature (°C)	Amplifier Function (Selectable only when Amplifier is installed)	Product Type	Output Mode	Operation Mode	Cable Length (m)	Timer	Applicable Sensors	Overview	Input/Output	Mounting Method	Specifications	Type	Light Source	Connection Method	Operating Ambient Temperature Range (°C)	Cord Length (m)
MYR 844.23	1 Piece(s)	5 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects	[Red] Red 4-element type light emitting diode	Amplifier only	-	0 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	Threshold Automatic Correction / Counter / External Input / Response time setting / Power Tuning Function	Sensor communication unit type	-	Light ON/Dark-ON (selectable)	-	-	-	-	-	DIN rail or optional bracket (type E39-L143)	Smart tuning	-	-	Connector type (for sensor communication unit)	-	-
MYR 674.18	1 Piece(s)	2 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects / Microscopic Object	[Red] Red 4-element type light emitting diode	Amplifier only	~400	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	Threshold Automatic Correction / Counter / External Input / Response time setting / Power Tuning Function	Standard type	NPN	Light ON/Dark-ON (selectable)	-	-	-	-	1 Output	DIN rail or optional bracket (type E39-L143)	Smart tuning	-	-	Connector type (wire-saving)	-	-
MYR 789.65	1 Piece(s)	5 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects	[Red] Red 4-element type light emitting diode	Amplifier only	-	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	-	Standard type	NPN	Light ON/Dark-ON (selectable)	-	-	-	-	1 Output	-	Manual adjustment of fiber emitting light intensity	-	-	Connector type (wire-saving)	-	-
MYR 814.46	1 Piece(s)	5 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects / Microscopic Object	[Red] Red 4-element type light emitting diode	Amplifier only	~400	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	Threshold Automatic Correction / Counter / External Input / Response time setting / Power Tuning Function	High function type	NPN	Light ON/Dark-ON (selectable)	-	-	-	-	1 Output + 1 Input	DIN rail or optional bracket (type E39-L143)	Smart tuning	-	-	Connector type (wire-saving)	-	-
MYR 814.46	1 Piece(s)	5 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects / Microscopic Object	[Red] Red 4-element type light emitting diode	Amplifier only	~400	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	Threshold Automatic Correction / Counter / External Input / Response time setting / Power Tuning Function	High function type	NPN	Light ON/Dark-ON (selectable)	-	-	-	-	1 Output + 1 Input	DIN rail or optional bracket (type E39-L143)	Manual adjustment of fiber emitting light intensity	-	-	Connector type (wire-saving)	-	-
MYR 814.46	1 Piece(s)	5 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects / Microscopic Object	[Red] Red 4-element type light emitting diode	Amplifier only	~400	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	Threshold Automatic Correction / Counter / External Input / Response time setting / Power Tuning Function	High function type	NPN	Light ON/Dark-ON (selectable)	-	-	-	-	2 Output	DIN rail or optional bracket (type E39-L143)	Smart tuning	-	-	Connector type (wire-saving)	-	-
MYR 789.65	1 Piece(s)	5 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects / Microscopic Object	[Red] Red 4-element type light emitting diode	Amplifier only	~400	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	Threshold Automatic Correction / Counter / External Input / Response time setting / Power Tuning Function	Standard type	PNP	Light ON/Dark-ON (selectable)	-	-	-	-	1 Output	DIN rail or optional bracket (type E39-L143)	Smart tuning	-	-	Connector type (wire-saving)	-	-
MYR 814.46	1 Piece(s)	5 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects / Microscopic Object	[Red] Red 4-element type light emitting diode	Amplifier only	~400	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	Threshold Automatic Correction / Counter / External Input / Response time setting / Power Tuning Function	High function type	PNP	Light ON/Dark-ON (selectable)	-	-	-	-	2 Output	DIN rail or optional bracket (type E39-L143)	Smart tuning	-	-	Connector type (wire-saving)	-	-
MYR 720.60	1 Piece(s)	2 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects / Microscopic Object	[Red] Red 4-element type light emitting diode	Amplifier only	~400	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	Threshold Automatic Correction / Counter / External Input / Response time setting / Power Tuning Function	Standard type	NPN	Light ON/Dark-ON (selectable)	2	-	-	-	1 Output	DIN rail or optional bracket (type E39-L143)	Smart tuning	-	-	Pre-wired cable	-	-
MYR 792.10	1 Piece(s)	5 Day(s) or more	[Fiber Unit] Fiber Sensor	Opaque Objects	[Red] Red 4-element type light emitting diode	Amplifier Separation Type	-	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	-	Standard type	NPN	-	5	Timer included	-	-	1 output	-	Smart tuning	Separated Type (Amplifier Only)	Red light (4 elements)	Pre-wired type	-25 to +55 (when 1-2 units are connected)	5
MYR 1,191.86	1 Piece(s)	9 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects	[Red] Red 4-element type light emitting diode	Amplifier only	-	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	-	Analog output type	NPN	Light ON/Dark-ON (selectable)	2	-	-	-	2 Output	-	Smart tuning	-	-	Pre-wired cable	-	-
MYR 845.23	1 Piece(s)	5 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects	[Red] Red 4-element type light emitting diode	Amplifier only	-	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	-	Standard type	NPN	Light ON/Dark-ON (selectable)	2	-	-	-	1 Output	-	Manual adjustment of fiber emitting light intensity	-	-	Pre-wired cable	-	-
MYR 742.08	1 Piece(s)	2 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects / Microscopic Object	[Red] Red 4-element type light emitting diode	Amplifier only	~400	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	Threshold Automatic Correction / Counter / External Input / Response time setting / Power Tuning Function	High function type	NPN	Light ON/Dark-ON (selectable)	2	-	-	-	2 Output + 1 Input	DIN rail or optional bracket (type E39-L143)	Smart tuning	-	-	Pre-wired cable	-	-
MYR 878.26	1 Piece(s)	5 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects	[Red] Red 4-element type light emitting diode	Amplifier only	-	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	-	High function type	NPN	Light ON/Dark-ON (selectable)	2	-	-	-	2 Output + 1 Input	-	Manual adjustment of fiber emitting light intensity	-	-	Pre-wired cable	-	-
MYR 877.26	1 Piece(s)	5 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects	[Red] Red 4-element type light emitting diode	Amplifier only	~1000	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	External Input / Power Tuning Function	High function type	NPN	Light ON/Dark-ON (selectable)	-	-	Compatible connector (XS3F-M42-40-A)	Smart fiber sensor (1 output / 1 input), M8 connector type	1 Output + 1 Input	DIN rail or optional bracket (type E39-L143)	Smart tuning	-	-	Connector type (M8)	-	-
MYR 845.23	1 Piece(s)	14 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects / Microscopic Object	[Red] Red 4-element type light emitting diode	Amplifier only	~400	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	Threshold Automatic Correction / Counter / External Input / Response time setting / Power Tuning Function	Standard type	PNP	Light ON/Dark-ON (selectable)	2	-	-	-	1 Output	DIN rail or optional bracket (type E39-L143)	Smart tuning	-	-	Pre-wired cable	-	-
MYR 878.26	1 Piece(s)	5 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects / Microscopic Object	[Red] Red 4-element type light emitting diode	Amplifier only	~400	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	Threshold Automatic Correction / Counter / External Input / Response time setting / Power Tuning Function	High function type	PNP	Light ON/Dark-ON (selectable)	2	-	-	-	2 Output + 1 Input	DIN rail or optional bracket (type E39-L143)	Smart tuning	-	-	Pre-wired cable	-	-
MYR 877.26	1 Piece(s)	5 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects	[Red] Red 4-element type light emitting diode	Amplifier only	~1000	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	External Input / Power Tuning Function	High function type	PNP	Light ON/Dark-ON (selectable)	-	-	Compatible connector (XS3F-M42-40-A)	Smart fiber sensor (1 output / 1 input), M8 connector type	1 Output + 1 Input	DIN rail or optional bracket (type E39-L143)	Smart tuning	-	-	Connector type (M8)	-	-
MYR 869.58	1 Piece(s)	14 Day(s) or more	[Fiber Sensor (Amplifier)] Fiber Sensor (Amplifier)	Opaque Objects	Infrared LED	Amplifier only	-	-25 (when 1 or 2 units are connected)～55 (when 1 or 2 units are connected)	-	Infrared type	NPN	Light ON/Dark-ON (selectable)	2	-	-	-	1 Output	-	Smart tuning	-	-	Pre-wired cable	-	-

Product TOP

Basic Information

Case Material	Polycarbonate	Operating Environment	Cold Resistance	Ambient Operating Temperature(%)	35::85
Power Supply Voltage(V)	10-30 V DC	Response Time (Standard Mode)(ms)	1	Shape (Amplifier)	Square shape

Configure

19 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Type
- Fiber Unit
  - Fiber Sensor
- Fiber Sensor (Amplifier)
  - Fiber Sensor (Amplifier)
Clear
Detected Objects
- Opaque Objects
- Microscopic Object
Clear
Light Source
- Red
  - Red 4-element type light emitting diode
- Infrared LED
Clear
Amplifier Installation Type
- Amplifier Separation Type
- Amplifier only
Clear
Detection Distance [Classification](mm)
- ~400
- ~1000
Clear
Amplifier Function (Selectable only when Amplifier is installed)
- Threshold Automatic Correction
- Counter
- External Input
- Response time setting
- Power Tuning Function
Clear
Product Type
Analog output type

High function type

Infrared type

Sensor communication unit type

Standard type
Clear
Output Mode
- NPN
- PNP
Clear
Operation Mode
- Light ON/Dark-ON (selectable)
Clear
Cable Length(m)
2

5
Clear
Timer
Timer included
Clear
Applicable Sensors
Compatible connector (XS3F-M42*-40*-A)
Clear
Overview
- Smart fiber sensor (1 output / 1 input), M8 connector type
Clear
Input/Output
1 Output

1 output

1 Output + 1 Input

2 Output

2 Output + 1 Input
Clear
Mounting Method
- DIN rail or optional bracket (type E39-L143)
Clear
Specifications
- Manual adjustment of fiber emitting light intensity
- Smart tuning
Clear
Type
- Separated Type (Amplifier Only)
Clear
Light Source
- Red light (4 elements)
Clear
Connection Method
- Connector type (M8)
- Connector type (for sensor communication unit)
- Connector type (wire-saving)
- Pre-wired cable
- Pre-wired type
Clear
Operating Ambient Temperature Range(°C)
- -25 to +55 (when 1-2 units are connected)
Clear
Cord Length(m)
- 5
Clear
type
- E3NX
- E3NX-FA
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

2 Day(s) or Less

5 Day(s) or Less

9 Day(s) or Less

14 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Fiber optic unit E32
OMRON

Standard Price : MYR 146.28-

Days to Ship : 1 Day(s) or more
Smart Fiber Amplifier [E3X-HD]
OMRON

Standard Price : MYR 428.79-

Days to Ship : 2 Day(s) or more
Simple Fiber Amplifier Unit [E3X-SD/NA]
OMRON

Standard Price : MYR 394.12-

Days to Ship : 2 Day(s) or more
Wire Saving Connector
OMRON

Standard Price : MYR 52.18-

Days to Ship : 2 Day(s) or more
Mounting Bracket [F3W]
OMRON

Standard Price : MYR 86.29-

Days to Ship : 5 Day(s) or more
Laser type compact built-in amplifier photoelectric sensor E3Z-LT/LR/LL
OMRON

Standard Price : MYR 1,120.29-

Days to Ship : 2 Day(s) or more
Lens for Fiber Optic Unit [E32]
OMRON

Standard Price : MYR 196.00-

Days to Ship : 2 Day(s) or more
Color mark detection, small amplifier built-in photoelectric sensor [E3ZM-V]
OMRON

Standard Price : MYR 981.80-

Days to Ship : 5 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Smart Fiber Amplifier E3NX-FA (Part Numbers)

Drawing

Pre-Wired Type

Reduced wiring connector type

M8 connector type

Connector type for sensor communication unit

Product Specification

Standard type, high-performance type, infrared type

Analog output type, sensor communication unit type

Basic Information

Configure

Specification/Dimensions

Type

Detected Objects

Light Source

Amplifier Installation Type

Detection Distance [Classification](mm)

Amplifier Function (Selectable only when Amplifier is installed)

Product Type

Output Mode

Operation Mode

Cable Length(m)

Timer

Applicable Sensors

Overview

Input/Output

Mounting Method

Specifications

Type

Light Source

Connection Method

Operating Ambient Temperature Range(°C)

Cord Length(m)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm