(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Compact Basic Switch V (Part Numbers)
Compact basic switch thoroughly pursuing reliability and safety.
[Features]
· Omron's best-selling micro switch, available in a wide variety of types from 10 A to 21 A
· Can be used for applications such as current interruption when opening or closing doors
· Available in two types of cases: thermoplastic and thermoset Meets a variety of requirements, including heat resistance and tracking resistance
(i)Caution
- The product images are representative only.
Part Number
Configured Part Number is shown.
Drawing
Thermoplastic case V-21/V-16/V-11/V-21 (IN)
*1. The dimensional tolerance of the parts not specified in the above drawing is +/- 0.4 mm.
*2. The values for operating characteristics apply to operation in the A direction (down).
Specifications Table
Performance
| Items | Part number | ||||||
|---|---|---|---|---|---|---|---|
| V-10 series | V-11 series | V-15 series | V-16 Series | V-21 Series | V-21 (IN) Series | ||
| Allowable operation speed | 0.1 mm to 1 m/s (for pin push button type) | ||||||
| Allowable operation Frequency | Mechanical | 600 times/min (for pin push button type) | |||||
| Electrical | 60 times/min | ||||||
| Insulation resistance | 100 MΩ or higher (at 500 V DC with insulation resistance tester) | ||||||
| Contact resistance (initial value) | 15 mΩ or less | ||||||
| Withstand voltage*1 | Between terminals of the same polarity | 1,000 V AC 50/60 Hz for 1 min | |||||
| Between current-carrying metal parts and ground | AC1,500V 50/60 Hz 1 min | AC2,000V 50/60 Hz 1 min | AC1,500V 50/60 Hz 1 min | 2,000 V AC 50/60 Hz for 1 min | |||
| Between each terminal and non-current-carrying metal parts | AC1,500V 50/60 Hz 1 min | AC2,000V 50/60 Hz 1 min | AC1,500V 50/60 Hz 1 min | 2,000 V AC 50/60 Hz for 1 min | |||
| Vibration*2 | Malfunction | Frequency 10 to 55 Hz double amplitude 1.5 mm | |||||
| Impact*2 | Endurance | Max. 1,000 m/s2 | |||||
| Malfunction | Max. 200 m/s2 | Max. 300 m/s2 | |||||
| Durability | Mechanical | More than 50 million times (60 times/min) | |||||
| Electrical | More than 300,000 times (30 times/min) Heat Resistant type: more than 50,000 times (30 times/min) | More than 300,000 times (30 times/min) | More than 100,000 times (30 times/min) Heat Resistant type: more than 20,000 times (30 times/min) | More than 100,000 times (30 times/min) | |||
| Protective Structure | IEC standard IP40 | ||||||
| Appliance Class | Class I | ||||||
| PTI (Proof tracking index) | 175 | ||||||
| Operating temperature range | -25 to +105℃ * V-21 series: -25 to +80℃ (heat-resistant type: -25 to +150℃) 60% RH or less (no freezing or condensation) | ||||||
| Operating humidity range | 85% RH or less (at +5 to +35℃) | ||||||
| Weight | Approximately 62 g (for pin push button type) | ||||||
*The values given above are initial values.
* 1. The withstanding voltages are those when a separator is used.
*2. The given values apply to the free position and total travel position for the pin push button type; the total travel position for the lever type. The closed or open circuit of the contact is within 1 ms.
Product Specification
Operating characteristics
| Type | Operating characteristics | |||||
|---|---|---|---|---|---|---|
| Operating force | Release force | Pre travel | Over travel | Movement differential | Operating position | |
| max.OF | min. RF | max. PT | min. OT | max. MD | OP | |
| V-21-1*6 V-16-1*6 | 3.92N | 0.78N | 1.2 mm | 1.0 mm | 0.4 mm | 14.7 +/- 0.4 mm |
| V-16-1*5 | 1.96 N | 0.49 N | ||||
| V-11-1*4 | 0.98 N | 0.20 N | ||||
| V-211-1*6 V-161-1*6 | 3.92N | 0.49 N | 1.6 mm | 0.8 mm | 0.6 mm | 15.2 +/- 0.5 mm |
| V-161-1*5 | 1.96 N | 0.49 N | ||||
| V-111-1*4 | 0.98 N | 0.15 N | ||||
| V-212-1*6 V-162-1*6 | 2.45 N | 0.25 N | 4.0 mm | 1.6 mm | 1.5 mm | 15.2 +/- 1.2 mm |
| V-162-1*5 | 1.23 N | 0.14 N | ||||
| V-112-1*4 | 0.59 N | 0.06 N | ||||
| V-213-1*6 V-163-1*6 | 1.27N | 0.12N | 9.0 mm | 2.0 mm | 2.8 mm | 15.2 (-3.2 to +2.6) mm |
| V-163-1*5 | 0.69N | 0.06 N | ||||
| V-113-1*4 | 0.34N | - | 9.0 mm | 3.2 mm | 2.8 mm | 15.2+/-2.6 mm |
| V-214-1*6 V-164-1*6 | 2.45 N | 0.25 N | 4.0 mm | 1.6 mm | 1.5 mm | 18.7+/-12 mm |
| V-164-1*5 | 1.23 N | 0.14 N | ||||
| V-114-1*4 | 0.59 N | 0.06 N | ||||
| V-215-1*6 V-165-1*6 | 4.71N | 0.49 N | 1.6 mm | 0.8 mm | 0.6 mm | 20.7+/-0.6 mm |
| V-165-1*5 | 2.35N | 0.49 N | ||||
| V-115-1*4 | 1.18 N | 0.15 N | ||||
| V-216-1*6 V-166-1*6 | 2.45 N | 0.25 N | 4.0 mm | 1.6 mm | 1.5 mm | 20.7+/-1.2 mm |
| V-166-1*5 | 1.23 N | 0.14 N | ||||
| V-116-1*4 | 0.59 N | 0.06 N | ||||
*The values for operating characteristics apply to operation in the A direction (down).
Model number display
Model Standard
Contact Specifications
Terminal Type/Shape
*The above is for a contact specification of 1c. 1a and 1b have 2 terminals. For terminal locations, see "Contact Specifications."
Technical Information
Contact Specifications
| Items | Type | ||||||
|---|---|---|---|---|---|---|---|
| V-21 | V-16 | V-15 | V-11 | V-10 | V-21 (IN) | ||
| Contact | Specifications | Rivet | |||||
| Material | Silver Alloy | Silver | Indium alloy | ||||
| Interval (standard value) | 1 mm (F gap) | ||||||
| Inrush Current | Normally closed | Max. 50 A | Max. 40 A | Max. 36 A | Max. 24 A | Max. 50 A | |
| Normally open | |||||||
| Minimum applicable load (reference value) | 5 V DC 160 mA | ||||||
Rated conditions
| Model | Rated Voltage | Items |
|---|---|---|
| Resistant load | ||
| V-21 series | AC250V | 21A |
| DC125V DC250V | 0.6 A 0.3 A | |
| V-16 series | AC250V | 16A |
| DC125V DC250V | 0.6 A 0.3 A | |
| V-15 series | AC250V | 15A |
| DC125V DC250V | 0.6 A 0.3 A | |
| V-11 series | AC250V | 11A |
| DC125V DC250V | 0.6 A 0.3 A | |
| V-10 series | AC250V | 10A |
| DC125V DC250V | 0.6 A 0.3 A | |
| V-21 (IN) series | DC30V | 12A |
*The above ratings are based on tests conducted under the following conditions.
(1) Ambient temperature: 20+/-2°C
(2) Ambient humidity: 65 +/- 5% RH
(3) Operation frequency: 30 times/min
Usage Examples
Installation
The switch should be securely installed using M3 screws and plain washers or spring lock washers, etc. The tightening torque should be 0.39 to 0.59 N⋅m.
Mounting Hole Dimensions
Cautions and Prohibitions
Safety Precautions
About Soldering
- Connection to soldering terminals
As a general rule, the processing time for soldering should be 5 seconds or less at a soldering iron tip of 60 W (iron tip temperature +250 to 350℃), and no external force should be applied for 1 minute after soldering.
Flux should be used in minimum quantities. If flux enters inside the switch, it may cause contact failure. - Connection to #187 tab terminal
Use a #187 tab receptacle and insert it straight into the terminal.
Excessive external force applied to the terminals from the horizontal or vertical direction may cause deformation of the terminals and damage to the housing. - Connection to #250 tab terminal
Use a #250 tab receptacle and insert it straight into the terminal.
Excessive external force applied to the terminals from the horizontal or vertical direction may cause deformation of the terminals and damage to the housing.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Detector Shape | Rated Operating Voltage (V) | Lever Shape Type | DC Rated Operating Voltage (V) | Plunger Shape Type | Operating Temperature Range (℃) | Acquired Standards | Protection Structure | Body Material | Force Required for Push Side O.F. (N) | Motion to Switching P.T. (mm) | Contact Type | Contact Point Type | Contact Material | Mechanical Operation Frequency (times/min or Less) | Rated Conductance Current (A) | Main Body External Dimension, Width W (mm) | Main Body External Dimension, Height H (mm) | Main Body External Dimension, Length L (mm) | Current Type | Actuator type | Specification of Terminal | Format Standard | Contact structure/specification | Details Type | Required Force for Push Side, O.F. (detailed numerical values) (N) | AC Rating Details | A Rated Voltage (v) | DC Rated Voltage (v) | Acquired Standards |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 14.28 | 1 Piece(s) | 9 Day(s) or more | Plunger Type | 125 / 250 / 250 AC | - | 8 ～ 250 | Top Plunger | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 1.2 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Plunger type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 0.98 | - | - | - | - | ||
MYR 13.48 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～150 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 1.2 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC/DC | Plunger type | Terminals with solder | Heat resistant type (150℃) | 1c (double throw) | - | 0.98 | - | - | - | - | ||
MYR 14.71 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 / 250 / 250 AC | - | 8 ～ 250 | Top Plunger | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.2 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Plunger type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.96 | - | - | - | - | ||
MYR 14.28 | 1 Piece(s) | 2 Day(s) or more | Plunger Type | 125 / 250 / 250 AC | - | 8 ～ 250 | Top Plunger | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.2 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Plunger type | #187 tab terminal | General form (105℃) | 1c (double throw) | - | 1.96 | - | - | - | - | ||
MYR 10.98 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 / 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～105 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.2 | Single Pole Normally Open | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC/DC | Pin push button type | Soldering terminal | General type (105℃) | 1a (normally open) | Micro Switch | 1.96N | AC250V 10A | 250 | 125 ～ 250 | UL/CSA/RU | ||
MYR 15.57 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 1.2 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 11 | 10.3 | 15.9 | 27.8 | AC | Plunger type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 0.98 | - | - | - | - | ||
MYR 14.28 | 1 Piece(s) | 2 Day(s) or more | Plunger Type | 125 / 250 / 250 AC | - | 8 ～ 250 | Top Plunger | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Plunger type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.96 | - | - | - | - | ||
MYR 15.57 | 1 Piece(s) | 1 Day(s) or more | Plunger Type | 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～150 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Plunger type | Terminals with solder | Heat resistant type (150℃) | 1c (double throw) | - | 1.96 | - | - | - | - | ||
MYR 14.28 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 / 250 / 250 AC | - | 8 ～ 250 | Top Plunger | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~4 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Plunger type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 3.92 | - | - | - | - | ||
MYR 14.28 | 1 Piece(s) | 2 Day(s) or more | Plunger Type | 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Plunger type | #250 tab terminal | General form (105℃) | 1c (double throw) | - | 1.96 | - | - | - | - | ||
MYR 14.28 | 1 Piece(s) | 2 Day(s) or more | Plunger Type | 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Plunger type | #187 tab terminal | General form (105℃) | 1c (double throw) | - | 1.96 | - | - | - | - | ||
MYR 16.00 | 1 Piece(s) | 2 Day(s) or more | Plunger Type | 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~4 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Plunger type | #187 tab terminal | General form (105℃) | 1c (double throw) | - | 3.92 | - | - | - | - | ||
MYR 15.35 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Plunger type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.96 | - | - | - | - | ||
MYR 13.69 | 1 Piece(s) | 23 Day(s) or more | Plunger Type | 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC/DC | Plunger type | - | General form (105℃) | 1c (double throw) | - | 3.92 | - | - | - | - | ||
MYR 13.05 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～150 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.2 | Single Pole Normally Open | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC/DC | Plunger type | Terminals with solder | Heat resistant type (150℃) | 1a (normally open) | - | 1.96 | - | - | - | - | ||
MYR 14.28 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Plunger type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.96 | - | - | - | - | ||
MYR 13.05 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 / 250 / 250 AC | - | 8 ～ 250 | Top Plunger | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC/DC | Plunger type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.96 | - | - | - | - | ||
MYR 16.00 | 1 Piece(s) | 2 Day(s) or more | Plunger Type | 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 16 | 10.3 | 15.9 | 27.8 | AC | Plunger type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.96 | - | - | - | - | ||
MYR 14.34 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 16 | 10.3 | 15.9 | 27.8 | AC/DC | Plunger type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 3.92 | - | - | - | - | ||
MYR 15.62 | 1 Piece(s) | 5 Day(s) or more | Plunger Type | 125 / 250 / 250 AC | - | 125 ～ 250 | Top Plunger | -25～105 | UL / CSA | IEC IP40 | [Resin] Thermoplastic | ~2 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 16 | 10.3 | 15.9 | 27.8 | AC/DC | Pin push button type | #187 tab terminal | General type (105℃) | 1c (double throw) | Micro Switch | 1.96N | AC250V 16A | 250 | 125 ～ 250 | UL/CSA/RU | ||
MYR 16.00 | 1 Piece(s) | 2 Day(s) or more | Plunger Type | 125 / 250 / 250 AC | - | 8 ～ 250 | Top Plunger | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~4 | 1.2 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 21 | 10.3 | 15.9 | 27.8 | AC | Plunger type | #250 tab terminal | General form (80℃) | 1c (double throw) | - | 3.92 | - | - | - | - | ||
MYR 16.86 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 1.6 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 0.98 | - | - | - | - | ||
MYR 14.34 | 1 Piece(s) | 23 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～150 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 1.6 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC/DC | Lever type | Terminals with solder | Heat resistant type (150℃) | 1c (double throw) | - | 0.98 | - | - | - | - | ||
MYR 16.86 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 125 / 250 / 250 AC | [Hinge Lever] Hinge Lever | 8 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 4 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 0.59 | - | - | - | - | ||
MYR 16.86 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 4 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 16.86 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 9 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 0.34 | - | - | - | - | ||
MYR 16.86 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 125 / 250 / 250 AC | [Hinge Lever] Hinge Lever | 8 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 9 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 0.69 | - | - | - | - | ||
MYR 16.86 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 4 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 0.59 | - | - | - | - | ||
MYR 14.34 | 1 Piece(s) | 23 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～150 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 4 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC/DC | Lever type | Terminals with solder | Heat resistant type (150℃) | 1c (double throw) | - | 0.59 | - | - | - | - | ||
MYR 16.86 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 4 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 125 / 250 / 250 AC | [Hinge Lever] Hinge Lever | 8 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.6 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.18 | - | - | - | - | ||
MYR 20.22 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～150 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.6 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | Heat resistant type (150℃) | 1c (double throw) | - | 1.18 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 1.6 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 2.35 | - | - | - | - | ||
MYR 16.48 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.6 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC/DC | Lever type | #187 tab terminal | General form (105℃) | 1c (double throw) | - | 2.35 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 4 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 0.59 | - | - | - | - | ||
MYR 20.22 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～150 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 4 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | Heat resistant type (150℃) | 1c (double throw) | - | 0.59 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 4 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 10 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 17.64 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 4 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 11 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 0.59 | - | - | - | - | ||
MYR 16.02 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | - | [Hinge Lever] Hinge Lever | - | - | -25～105 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Hinge lever type | #187 tab terminal | General type (105℃) | 1c (double throw) | Micro Switch | 0.98N | AC250V 11A | 250 | 125 ～ 250 | UL/CSA/RU | ||
MYR 21.93 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.6 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 11 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.18 | - | - | - | - | ||
MYR 21.65 | 1 Piece(s) | 14 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 1.2 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 11 | 10.3 | 15.9 | 27.8 | AC | Lever type | #187 tab terminal | General form (105℃) | 1c (double throw) | - | 1.18 | - | - | - | - | ||
MYR 21.93 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 4 | Single Pole Double Throw | Rivet | Pure Silver | 600 | 11 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 0.59 | - | - | - | - | ||
MYR 16.86 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.96 | - | - | - | - | ||
MYR 16.86 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 125 / 250 / 250 AC | [Hinge Lever] Hinge Lever | 8 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 14.34 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～150 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC/DC | Lever type | Terminals with solder | Heat resistant type (150℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 16.00 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 2.45 | - | - | - | - | ||
MYR 16.86 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | #187 tab terminal | General form (105℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 16.86 | 1 Piece(s) | 69 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 9 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 0.69 | - | - | - | - | ||
MYR 14.34 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～150 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 9 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC/DC | Lever type | Terminals with solder | Heat resistant type (150℃) | 1c (double throw) | - | 0.69 | - | - | - | - | ||
MYR 16.86 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 9 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | #187 tab terminal | General form (105℃) | 1c (double throw) | - | 0.69 | - | - | - | - | ||
MYR 16.86 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 14.34 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC/DC | Lever type | #187 tab terminal | General form (105℃) | 1c (double throw) | - | 2.45 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 1 Day(s) or more | Lever Shape (push) | 125 / 250 / 250 AC | [Hinge Lever] Hinge Lever | 8 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 2.35 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～150 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | Heat resistant type (150℃) | 1c (double throw) | - | 2.35 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~5 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 4.71 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | #250 tab terminal | General form (105℃) | 1c (double throw) | - | 2.35 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 125 / 250 / 250 AC | [Hinge Lever] Hinge Lever | 8 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | #187 tab terminal | General form (105℃) | 1c (double throw) | - | 2.35 | - | - | - | - | ||
MYR 20.81 | 1 Piece(s) | 23 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.6 | Single Pole Normally Open | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC/DC | Lever type | Terminals with solder | General form (105℃) | 1a (normally open) | - | 2.35 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 125 / 250 / 250 AC | [Hinge Lever] Hinge Lever | 8 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 1 Day(s) or more | Lever Shape (push) | 125 / 250 / 250 AC | [Hinge Lever] Hinge Lever | 8 ～ 250 | - | -25～150 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | Heat resistant type (150℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 2.45 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 15 | 10.3 | 15.9 | 27.8 | AC | Lever type | #187 tab terminal | General form (105℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 16.48 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 16 | 10.3 | 15.9 | 27.8 | AC/DC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.96 | - | - | - | - | ||
MYR 17.64 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 16 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 17.64 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 16 | 10.3 | 15.9 | 27.8 | AC | Lever type | #187 tab terminal | General form (105℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 17.64 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~1 | 9 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 16 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 0.69 | - | - | - | - | ||
MYR 16.48 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 9 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 16 | 10.3 | 15.9 | 27.8 | AC/DC | Lever type | #187 tab terminal | General form (105℃) | 1c (double throw) | - | 0.69 | - | - | - | - | ||
MYR 17.64 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 16 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 19.36 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 16 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 2.35 | - | - | - | - | ||
MYR 18.76 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 16 | 10.3 | 15.9 | 27.8 | AC/DC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 4.71 | - | - | - | - | ||
MYR 21.15 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 16 | 10.3 | 15.9 | 27.8 | AC | Lever type | #250 tab terminal | General form (105℃) | 1c (double throw) | - | 2.35 | - | - | - | - | ||
MYR 19.36 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 16 | 10.3 | 15.9 | 27.8 | AC | Lever type | Terminals with solder | General form (105℃) | 1c (double throw) | - | 1.23 | - | - | - | - | ||
MYR 17.64 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~4 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 21 | 10.3 | 15.9 | 27.8 | AC | Lever type | #250 tab terminal | General form (80℃) | 1c (double throw) | - | 3.92 | - | - | - | - | ||
MYR 17.64 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 21 | 10.3 | 15.9 | 27.8 | AC | Lever type | #250 tab terminal | General form (80℃) | 1c (double throw) | - | 2.45 | - | - | - | - | ||
MYR 17.64 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~2 | 9 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 21 | 10.3 | 15.9 | 27.8 | AC | Lever type | #250 tab terminal | General form (80℃) | 1c (double throw) | - | 1.27 | - | - | - | - | ||
MYR 17.64 | 1 Piece(s) | 5 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA / EN | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 21 | 10.3 | 15.9 | 27.8 | AC | Lever type | #250 tab terminal | General form (80℃) | 1c (double throw) | - | 2.45 | - | - | - | - | ||
MYR 21.93 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~5 | 1.6 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 21 | 10.3 | 15.9 | 27.8 | AC | Lever type | #250 tab terminal | General form (80℃) | 1c (double throw) | - | 4.71 | - | - | - | - | ||
MYR 21.93 | 1 Piece(s) | 2 Day(s) or more | Lever Shape (push) | 250 / 250 AC | [Hinge Lever] Hinge Lever | 125 ～ 250 | - | -25～80 | UL / CSA | IEC IP40 | [Resin] Thermosetting Resin | ~3 | 4 | Single Pole Double Throw | Rivet | Silver alloy | 600 | 21 | 10.3 | 15.9 | 27.8 | AC | Lever type | #250 tab terminal | General form (80℃) | 1c (double throw) | - | 2.45 | - | - | - | - |
Loading...
Basic Information
| Mechanical Life(10,000 times) | 5000 |
|---|
Specification/Dimensions
-
Detector Shape
- Plunger Type
- Lever Shape (push)
-
Rated Operating Voltage(V)
- 125
- 250
- 250 AC
-
Lever Shape Type
- Hinge Lever
- Hinge Lever
-
DC Rated Operating Voltage(V)
- 8
- 14
- 30
- 125
- 250
-
Plunger Shape Type
- Top Plunger
-
Acquired Standards
- UL
- CSA
- EN
-
Body Material
- Resin
- Resin
-
Force Required for Push Side O.F.(N)
-
Contact Type
- Single Pole Double Throw
- Single Pole Normally Open
-
Contact Point Type
- Rivet
-
Contact Material
- Pure Silver
- Silver alloy
-
Rated Conductance Current(A)
-
Current Type
- AC
- AC/DC
-
Actuator type
- Hinge lever type
- Lever type
- Pin push button type
- Plunger type
-
Specification of Terminal
-
Format Standard
- General form (80℃)
- General form (105℃)
- General type (105℃)
- Heat resistant type (150℃)
-
Contact structure/specification
-
Details Type
-
Required Force for Push Side, O.F. (detailed numerical values)(N)
- 0.34
- 0.59
- 0.69
- 0.98
- 0.98N
- 1.18
- 1.23
- 1.27
- 1.96
- 1.96N
- 2.35
- 2.45
- 3.92
- 4.71
-
AC Rating Details
- AC250V 10A
- AC250V 11A
- AC250V 16A
-
A Rated Voltage(v)
- 250
-
DC Rated Voltage(v)
- 125
- 250
-
type
- V
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 5 Day(s) or Less
- 9 Day(s) or Less
- 14 Day(s) or Less
- 23 Day(s) or Less
- 69 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Small Basic Switch [D2MV]
- Miniature Basic Switch [VX]
- Ultra Compact Basic Switch [D2S]
- Ultra Compact Basic Switch [J]
- Magnetic Blowout Basic Switch Type X
- Connector-type detection switch
- Sealed compact basic switch D2VW
- Ultra Compact Detection Switch [D3C]
Customers Who Viewed This Item Also Viewed
-
![Ultra Small Basic Switch [SS]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559138_001.jpg?$product_recommend_b$)
-
Ejector plate return confirmation switchMISUMI
Standard Price : MYR 15.22-
Days to Ship : 1 Day(s) or more
-
![Miniature Basic Switch [VX]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559105_1.jpg?$product_recommend_b$)
-
-
![Ultra-Small Basic Switch [D2F]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559149_001.jpg?$product_recommend_b$)
-
![Small Basic Switch [D2MV]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559071.jpg?$product_recommend_b$)
-
-
![Small Basic Switch [D2RV]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559082_1.jpg?$product_recommend_b$)
-
![Sealed Ultra Subminiature Basic Switch [D2HW]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138125_1.jpg?$product_recommend_b$)
Sealed Ultra Subminiature Basic Switch [D2HW]OMRON
Standard Price : MYR 8.11-
Days to Ship : 1 Day(s) or more
-
Quick-Fitting Joints For Mold Cooling -Integrated Plugs・Sockets/(Heat-Resistant 99degree Series)/Straight Joints-MISUMI
Standard Price : MYR 11.88-
Days to Ship : 1 Day(s) or more
![Ultra Small Basic Switch [SS]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559138_001.jpg?$product_recommend_b$)
![Miniature Basic Switch [VX]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559105_1.jpg?$product_recommend_b$)
![Ultra-Small Basic Switch [D2F]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000559149_001.jpg?$product_recommend_b$)
![Small Basic Switch [D2MV]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559071.jpg?$product_recommend_b$)
![Small Basic Switch [D2RV]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000559082_1.jpg?$product_recommend_b$)
![Sealed Ultra Subminiature Basic Switch [D2HW]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138125_1.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy