(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Rectangular standard type proximity sensor TL-N/Q (Part Numbers)
Supports a wide range of models for various uses.
[Features]
· Easy installation, suitable for high-speed pulse generators, high-speed rotating control, etc.
·Direct metal installation possible (Type -N)
· With a wide variety of models, ideal for various limit control, counting control, etc. (Type -N)
Part Number
Configured Part Number is shown.
Drawing
Main body
Product Specification
Rating / Performance
DC 2-wire connection
| Items | Type | ||||
|---|---|---|---|---|---|
| TL-Q5MD* | TL-N7MD* | TL-N12MD* | TL-N20MD* | ||
| Sensing Distance | 5 mm +/- 10% | 7 mm +/- 10% | 12 mm +/- 10% | 20 mm +/- 10% | |
| Set distance | 0 to 4 mm | 0 to 5.6 mm | 0 to 9.6 mm | 0 to 16 mm | |
| Hysteresis | 10% or less of detection distance | ||||
| Detectable objects | Magnetic metals (For non-magnetic metals, the detection distance will be reduced. See "Characteristic Data" | ||||
| Standard detected object | 18 x 18 x 1 mm, steel | Steel sheet 30 x 30 x 1 mm | 40 x 40 x 1 mm, steel | 50 x 50 x 1 mm, steel | |
| Response frequency * | 500 Hz | 300 Hz | |||
| Power Supply Voltage (Operating Voltage Range) | 12 to 24 V DC, ripple (p-p) 10% or less (DC10 to 30 V) | ||||
| Leakage current | 0.8 mA or less | ||||
| Control output | Contact Capacity | 3 to 100 mA | |||
| Residual voltage | 3.3 V or less (when load current is 100 mA, cord length is 2 m) | ||||
| Indicator light | D1 type: operation display (red), setting display (green) D2 type: operation display (red) | ||||
| Operating mode (When a detected object approaches) | D1 type: NO D2 type: NC For details, refer to the time chart in the "Input/Output Stage Circuit Diagram" | ||||
| Protection circuit | Load Short Circuit Protection, Surge Absorption | ||||
| Ambient temperature range | When operating, when storing: -25 to +70°C each (no freezing or condensation) | ||||
| Ambient humidity range | Operating, Storage: 35 to 95%RH each (no condensation) | ||||
| Effect of temperature | Within +/-10% of detection distance at +23°C within the temperature range of -25 to +70°C | ||||
| Effect of voltage | Within +/-15% of the rated power supply voltage, within +/-2.5% of the sensing distance at the rated power supply voltage | ||||
| Insulation resistance | 50 MΩ or more (500 V DC insulation resistance tester) between all live parts and the case | ||||
| Withstand voltage | 1,000 V AC for 1 minute between all live parts and the case | ||||
| Vibration (endurance) | 10 to 55 Hz, 1.5 mm double amplitude, 2 hr in each direction of X, Y, and Z | ||||
| Shock (endurance) | 500 m/s2 in Each X, Y, Z Direction 3 times | 1,000 m/s2 in Each X, Y, Z Direction 10 times | |||
| Protective Structure | IEC standard IP67, OMRON internal standard: Oil resistance | ||||
| Connection method | Pre-wired type (standard cord length 2 m) | ||||
| Weight (packed state) | Approx. 85 g | Approximately 165 g | Approx. 235 g | Approx. 330 g | |
| Material | Case | Heat-resistant ABS | |||
| Detecting surface | |||||
| Accessory | Instruction manual | Installation metal fitting, installation screw (M4 x 25), instruction manual | Installation metal fitting, installation screw (M4 x 30), instruction manual | Installation metal fitting, installation screw (M5 x 40), instruction manual | |
*The response frequency is an average value. The measurement conditions are to use the standard detected object, set the interval between the detected objects to twice that of the standard detected object, and set the distance to 1/2 of the sensing distance.
Direct current 3-Wire Type
| Items | Type | ||
|---|---|---|---|
| Model TL-Q2MC1 | Model TL-Q5MC* / Model TL-Q5MB1 | ||
| Sensing Distance | 2 mm +/- 15% | 5 mm +/- 10% | |
| Set distance | 0 to 1.5 mm | 0 to 4 mm | |
| Hysteresis | 10% or less of detection distance | ||
| Detectable objects | Magnetic metals (For non-magnetic metals, the detection distance will be reduced. See "Characteristic Data" | ||
| Standard detected object | Steel 8 x 8 x 1 mm | Steel sheet 15 x 15 x 1 mm | |
| Response time | - | 2 ms or less | |
| Response frequency * | 500 Hz | ||
| Power Supply Voltage (Operating Voltage Range) | 12 to 24 V DC, ripple (p-p) 10% or less (DC10 to 30 V) | ||
| Current Consumption | 15 mA or less (at 24 V DC, at no load) | 10 mA or less (at 24 V DC) | |
| Control output | Contact Capacity | NPN open collector 100 mA or less (30 V DC or less) | Model TL-Q5MC*: NPN open collector, 50 mA or less (30 V DC or less) Model TL-Q5MB*: PNP open collector, 50 mA or less (30 V DC or less) |
| Residual voltage | 1 V or less (when load current is 100 mA and cord length is 2 m) | 1 V or less (when load current is 50 mA and cord length is 2 m) | |
| Indicator light | Detection display (red) | ||
| Operating mode (When a detected object approaches) | NO | B1/C1 type: NO C2 type: NC | |
| For details, refer to the time chart in the "Input/Output Stage Circuit Diagram" | |||
| Protection circuit | Reverse Connection Protection, Surge Absorption | ||
| Ambient temperature range | During operation and storage: -10 to +60°C each (no freezing or condensation) | Operating: -25 to +70°C, Storage: -25 to +70°C (no freezing or condensation) | |
| Ambient humidity range | Operating, Storage: 35 to 95%RH each (no condensation) | ||
| Effect of temperature | +/-10% or less of detection distance at +23°C within the temperature range of -10 to +60°C | +/-20% or less of detection distance at +23°C within the temperature range of -25 to +70°C | |
| Effect of voltage | Within +/-10% of the rated power supply voltage, within +/-2.5% of the sensing distance at the rated power supply voltage | ||
| Insulation resistance | 50 MΩ or more (500 V DC insulation resistance tester) between all live parts and the case | 5 MΩ or more (500 V DC insulation resistance tester) between all live parts and the case | |
| Withstand voltage | 1,000 V AC for 1 minute between all live parts and the case | 500 V AC 50/60 Hz 1 min between batch of live parts and the case | |
| Vibration (endurance) | 10 to 55 Hz, 1.5 mm double amplitude, 2 hr in each direction of X, Y, and Z | ||
| Shock (endurance) | 1,000 m/s2 in Each X, Y, Z Direction 10 times | 200 m/s2 in Each X, Y, Z Direction 10 times | |
| Protective Structure | IEC standard IP67, OMRON internal standard: Oil resistance | IEC standard IP67 | |
| Connection method | Pre-wired type (standard cord length 2 m) | ||
| Weight (packed state) | Approx. 60 g | Approx. 90 g | |
| Material | Case | Heat-resistant ABS | |
| Detecting surface | |||
| Accessory | Instruction manual | - | |
*The response frequency is an average value. The measurement conditions are to use the standard detected object, set the interval between the detected objects to twice that of the standard detected object, and set the distance to 1/2 of the detection distance.
Direct current 3-Wire/Alternating current 2-Wire
| Items | Type | |||
|---|---|---|---|---|
| Model TL-N5ME*, Model TL-N5MY* | Model TL-N10ME*, Model TL-N10MY*, Model TL-N10MF1 | Model TL-N20ME*, Model TL-N20MY* | ||
| Sensing Distance | 5 mm +/- 10% | 10 mm +/- 10% | 20 mm +/- 10% | |
| Set distance | 0 to 4 mm | 0 to 8 mm | 0 to 16 mm | |
| Hysteresis | 15% or less of detection distance | |||
| Detectable objects | Magnetic metal (Detection distance is reduced for non-magnetic metals. See "Characteristic Data" | |||
| Standard detected object | Steel sheet 30 x 30 x 1 mm | 40 x 40 x 1 mm, steel | 50 x 50 x 1 mm, steel | |
| Response frequency *1 | E/F type: 500 Hz Y type: 10 Hz | E type: 40 Hz Y type: 10 Hz | ||
| Power supply voltage *2 (Operating Voltage Range) | E/F type: 12 to 24 V DC, ripple (p-p) 10% or less (DC10 to 30 V) Y type: 100 to 220 V AC (90 to 250 V AC) 50/60 Hz | |||
| Current Consumption | E/F type: 8 mA or less (at 12 V DC), 15 mA or less (at 24 V DC) | |||
| Leakage current | Y type: See "Performance Data" | |||
| Control output | Contact Capacity | E/F type: 100 mA or less (at 12 V DC), 200 mA or less (at 24 V DC) Y type: 10 – 200 mA | ||
| Residual voltage | E/F type: 1 V or less (at 200 mA) Y type: See "Performance Data" | |||
| Indicator light | E/F type: detection indicator (red) Y type: operation indicator (red) | |||
| Operating mode (When a detected object approaches) | E1/F1/Y1 type: NO E2/Y2 type: NC For details, refer to the time chart in the "Input/Output Stage Circuit Diagram" | |||
| Protection circuit | E type: Reverse connection protection, surge absorb Y type: Surge absorb | |||
| Ambient temperature range | When operating, when storing: -25 to +70°C each (no freezing or condensation) | |||
| Ambient humidity range | Operating, Storage: 35 to 95%RH each (no condensation) | |||
| Effect of temperature | Within +/-10% of detection distance at +23°C within the temperature range of -25 to +70°C | |||
| Effect of voltage | E/F type: Within +/-10% of the rated supply voltage, the detection distance varies by +/-2.5% or less at the rated supply voltage. Y type: Within +/-10% of the rated supply voltage, the detection distance varies by +/-1% or less at the rated supply voltage. | |||
| Insulation resistance | 50 MΩ or more (500 V DC insulation resistance tester) between all live parts and the case | |||
| Withstand voltage | E/F type: AC 1,000 V 50/60 Hz 1 min between all live parts and the case Y type: AC 2,000 V 50/60 Hz 1 min between all live parts and the case | |||
| Vibration (endurance) | 10 to 55 Hz, 1.5 mm double amplitude, 2 hr in each direction of X, Y, and Z | |||
| Shock (endurance) | 500 m/s2 in Each X, Y, Z Direction 10 times | |||
| Protective Structure | IEC standard IP67, OMRON internal standard: Oil resistance | |||
| Connection method | Pre-wired type (standard cord length 2 m) | |||
| Weight (packed state) | Approx. 190 g | Approx. 240 g | Approx. 340 g | |
| Material | Case | Heat-resistant ABS | ||
| Detecting surface | ||||
| Accessory | E type: installation metal fitting, installation screw (+) (M4 x 25), instruction manual Y type: instruction manual | E/F type: installation metal fitting, installation screw (+) (M4 x 30), instruction manual Y type: instruction manual | E Type: installation metal fitting, installation screw (+) (M5 x 40), instruction manual Y type: instruction manual | |
*1. The response frequency is an average value. The measurement conditions are to use the standard detected object, set the interval between the detected objects to twice that of the standard detected object, and set the distance to 1/2 of the detection distance.
*2. The E type (direct current switching type) can be used with a fully rectified power supply of 24 V DC +/-10% (average value).
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Detection Distance L1 (Classification) (mm) | Operating Environment | Head Size Depth (range) (mm) | Head Size Depth (mm) | The Size and Width of Detection Head (Range) (mm) | The Size and Width of Detection Head (mm) | The Size and Height of Detection Head (Range) (mm) | The Size and Height of Detection Head (mm) | Acquired Standards | Types | Power Type | Power Supply Voltage | Output Mode | Operation Mode | Connection Method | Cable Length (m) | Different Frequency Type | Cable Specifications | Detection distance L1 details (mm) | Standard sensing object | Sensing Distance (mm) | Protection Structure | Acquired Standards |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 198.48 | 1 Piece(s) | 5 Day(s) or more | ~5 | Standard / Oil Resistance Reinforcement / Cold Resistance | 30.1~40 | 38.5 | 20.1~30 | 25 | 20.1~30 | 25.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NO | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 5 | Iron 30×30×1mm | - | - | - | ||
MYR 269.00 | 1 Piece(s) | 5 Day(s) or more | ~5 | Standard / Oil Resistance Reinforcement / Cold Resistance | 30.1~40 | 38.5 | 20.1~30 | 25 | 20.1~30 | 25.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NO | Pre-wired Type | 5 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 5 | Iron 30×30×1mm | - | - | - | ||
MYR 198.48 | 1 Piece(s) | 2 Day(s) or more | ~5 | Standard / Oil Resistance Reinforcement / Cold Resistance | 30.1~40 | 38.5 | 20.1~30 | 25 | 20.1~30 | 25.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NC | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 5 | Iron 30×30×1mm | - | - | - | ||
MYR 370.00 | 1 Piece(s) | 5 Day(s) or more | ~5 | Standard / Oil Resistance Reinforcement / Cold Resistance | 40.1~50 | 50 | 20.1~30 | 25 | 20.1~30 | 25.5 | CE / IEC / CCC | Standard type (metal direct mounting supported) | AC, 2-Wire | AC100-220V | AC 2-wire connection | NO | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core | 5 | Iron 30×30×1mm | - | - | - | ||
MYR 194.84 | 1 Piece(s) | 2 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 30.1~40 | 38.5 | 20.1~30 | 25 | 20.1~30 | 25.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 2-Wire Type | DC12-24V | DC 2-wire connection | NO | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 7 | Iron 30×30×1mm | - | - | - | ||
MYR 224.95 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 30.1~40 | 38.5 | 20.1~30 | 25 | 20.1~30 | 25.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 2-Wire Type | DC12-24V | DC 2-wire connection | NO | Pre-wired Type | 5 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 7 | Iron 30×30×1mm | - | - | - | ||
MYR 280.00 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 30.1~40 | 38.5 | 20.1~30 | 25 | 20.1~30 | 25.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 2-Wire Type | DC12-24V | DC 2-wire connection | NC | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 7 | Iron 30×30×1mm | - | - | - | ||
MYR 257.00 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 30.1~40 | 38.5 | 20.1~30 | 25 | 20.1~30 | 25.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 2-Wire Type | DC12-24V | DC 2-wire connection | NO | Pre-wired Type | 2 | Different frequency | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 7 | Iron 30×30×1mm | - | - | - | ||
MYR 199.31 | 1 Piece(s) | 2 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 52.5 | 20.1~30 | 30 | 30.1~40 | 30.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NO | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 10 | Iron 40×40×1mm | - | - | - | ||
MYR 283.00 | 1 Piece(s) | 2 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 52.5 | 20.1~30 | 30 | 30.1~40 | 30.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NO | Pre-wired Type | 5 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 10 | Iron 40×40×1mm | - | - | - | ||
MYR 199.31 | 1 Piece(s) | 2 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 52.5 | 20.1~30 | 30 | 30.1~40 | 30.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NC | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 10 | Iron 40×40×1mm | - | - | - | ||
MYR 301.28 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 52.5 | 20.1~30 | 30 | 30.1~40 | 30.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NC | Pre-wired Type | 5 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 10 | Iron 40×40×1mm | - | - | - | ||
MYR 311.00 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 52.5 | 20.1~30 | 30 | 30.1~40 | 30.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NO | Pre-wired Type | 2 | Different frequency | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 10 | Iron 40×40×1mm | - | - | - | ||
MYR 196.87 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement | 50.1~60 | 52.5 | 20.1~30 | 30 | 30.1~40 | 30.5 | CE / IEC | - | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type PNP | NO | Pre-wired Type | 5 | Standard | - | 10 | Iron 40×40×1mm | - | - | - | ||
MYR 451.08 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 52.5 | 20.1~30 | 30 | 30.1~40 | 30.5 | CE / IEC / CCC | Standard type (metal direct mounting supported) | AC, 2-Wire | AC100-220V | AC 2-wire connection | NO | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 10 | Iron 40×40×1mm | - | - | - | ||
MYR 203.52 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 52.5 | 20.1~30 | 30 | 30.1~40 | 30.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 2-Wire Type | DC12-24V | DC 2-wire connection | NO | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 12 | Iron 40×40×1mm | - | - | - | ||
MYR 312.00 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 52.5 | 20.1~30 | 30 | 30.1~40 | 30.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 2-Wire Type | DC12-24V | DC 2-wire connection | NO | Pre-wired Type | 5 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 12 | Iron 40×40×1mm | - | - | - | ||
MYR 272.00 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 52.5 | 20.1~30 | 30 | 30.1~40 | 30.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 2-Wire Type | DC12-24V | DC 2-wire connection | NC | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 12 | Iron 40×40×1mm | - | - | - | ||
MYR 272.00 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 52.5 | 20.1~30 | 30 | 30.1~40 | 30.5 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 2-Wire Type | DC12-24V | DC 2-wire connection | NO | Pre-wired Type | 2 | Different frequency | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 12 | Iron 40×40×1mm | - | - | - | ||
MYR 355.78 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 53 | 30.1~40 | 40 | 40.1～ | 41 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 2-Wire Type | DC12-24V | DC 2-wire connection | NO | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 20 | Iron 50×50×1mm | - | - | - | ||
MYR 383.25 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement | 50.1~60 | 53 | 30.1~40 | 40 | 40.1～ | 41 | CE / IEC | - | Direct Current 2-Wire Type | DC12-24V | DC 2-wire connection | NO | Pre-wired Type | 5 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 20 | Iron 50×50×1mm | - | - | - | ||
MYR 334.58 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 53 | 30.1~40 | 40 | 30.1~40 | 40 | CE / IEC | - | Direct Current 2-Wire Type | 12-24 V DC | DC 2-wire connection | NC | Pre-Wired Type | 2 | Standard | - | 11 to 20 | 50 x 50 x 1 mm, steel | 20 | IP67 | CE/IEC | ||
MYR 356.00 | 1 Piece(s) | 2 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 53 | 30.1~40 | 40 | 40.1～ | 41 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NO | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 20 | Iron 50×50×1mm | - | - | - | ||
MYR 457.00 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 53 | 30.1~40 | 40 | 40.1～ | 41 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NO | Pre-wired Type | 5 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 20 | Iron 50×50×1mm | - | - | - | ||
MYR 355.96 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 53 | 30.1~40 | 40 | 40.1～ | 41 | CE / IEC | Standard type (metal direct mounting supported) | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NC | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 20 | Iron 50×50×1mm | - | - | - | ||
MYR 575.60 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 53 | 30.1~40 | 40 | 40.1～ | 41 | CE / IEC / CCC | Standard type (metal direct mounting supported) | AC, 2-Wire | AC100-220V | AC 2-wire connection | NO | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 20 | Iron 50×50×1mm | - | - | - | ||
MYR 576.30 | 1 Piece(s) | 5 Day(s) or more | - | Standard / Oil Resistance Reinforcement / Cold Resistance | 50.1~60 | 53 | 30.1~40 | 40 | 40.1～ | 41 | CE / IEC | Standard Type | AC, 2-Wire | AC100-220V | AC 2-wire connection | NC | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core | 20 | Iron 50×50×1mm | - | - | - | ||
MYR 218.00 | 1 Piece(s) | 5 Day(s) or more | ~5 | Standard / Oil Resistance Reinforcement / Cold Resistance | 20.1~30 | 28 | 5.1~10 | 9 | 5.1~10 | 8 | CE / IEC | Standard Type | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NO | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ2.9, 3-core | 2 | Iron 8×8×1mm | - | - | - | ||
MYR 174.39 | 1 Piece(s) | 5 Day(s) or more | ~5 | Standard / Oil Resistance Reinforcement | 20.1~30 | 28 | 5.1~10 | 9 | 5.1~10 | 8 | CE / IEC | - | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NO | Pre-wired Type | 5 | Standard | Vinyl (PVC)-insulated round cord, φ4, 2-core/3-core | 2 | Iron 8×8×1mm | - | - | - | ||
MYR 161.60 | 1 Piece(s) | 2 Day(s) or more | ~5 | Standard / Cold Resistance | 20.1~30 | 28 | 15.1~20 | 17 | 10.1~20 | 17 | CE / IEC | Standard Type | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NO | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ4, 2-core/3-core | 5 | Iron 15×15×1mm | - | - | - | ||
MYR 208.37 | 1 Piece(s) | 2 Day(s) or more | ~5 | Standard / Cold Resistance | 20.1~30 | 28 | 15.1~20 | 17 | 10.1~20 | 17 | CE / IEC | Standard Type | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NO | Pre-wired Type | 5 | Standard | Vinyl (PVC)-insulated round cord, φ4, 2-core/3-core | 5 | Iron 15×15×1mm | - | - | - | ||
MYR 161.95 | 1 Piece(s) | 2 Day(s) or more | ~5 | Standard / Cold Resistance | 20.1~30 | 28 | 15.1~20 | 17 | 10.1~20 | 17 | CE / IEC | Standard Type | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NC | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ4, 2-core/3-core | 5 | Iron 15×15×1mm | - | - | - | ||
MYR 154.02 | 1 Piece(s) | 5 Day(s) or more | ~5 | Standard / Cold Resistance | 20.1~30 | 28 | 15.1~20 | 17 | 10.1~20 | 17 | CE / IEC | Standard Type | Direct Current 3-Wire Type | DC12-24V | Direct current 3-wire type NPN | NO | Pre-wired Type | 2 | Different frequency | Vinyl (PVC)-insulated round cord, φ4, 2-core/3-core | 5 | Iron 15×15×1mm | - | - | - | ||
MYR 165.44 | 1 Piece(s) | 2 Day(s) or more | ~5 | Standard / Oil Resistance Reinforcement / Cold Resistance | 20.1~30 | 28 | 15.1~20 | 17 | 10.1~20 | 17 | CE / IEC | Standard Type | Direct Current 2-Wire Type | DC12-24V | DC 2-wire connection | NO | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ4, 2-core/3-core | 5 | Iron 18×18×1mm | - | - | - | ||
MYR 178.25 | 1 Piece(s) | 5 Day(s) or more | ~5 | Standard / Oil Resistance Reinforcement | 20.1~30 | 28 | 15.1~20 | 17 | 10.1~20 | 17 | CE / IEC | - | Direct Current 2-Wire Type | DC12-24V | DC 2-wire connection | NO | Pre-wired Type | 5 | Standard | Vinyl (PVC)-insulated round cord, φ4, 2-core/3-core | 5 | Iron 18×18×1mm | - | - | - | ||
MYR 184.00 | 1 Piece(s) | 5 Day(s) or more | ~5 | Standard / Oil Resistance Reinforcement / Cold Resistance | 20.1~30 | 28 | 15.1~20 | 17 | 10.1~20 | 17 | CE / IEC | Standard Type | Direct Current 2-Wire Type | DC12-24V | DC 2-wire connection | NC | Pre-wired Type | 2 | Standard | Vinyl (PVC)-insulated round cord, φ4, 2-core/3-core | 5 | Iron 18×18×1mm | - | - | - |
Loading...
Basic Information
| Shape | Square shape | Shielded / Non-shielded | Non Shield Type | Amplifier | Amplifier Built-in Type |
|---|---|---|---|---|---|
| Protection Structure (IEC) | IP67 | Detected Objects | Magnetic Metal | Detection Direction | Front Surface |
| Case Material | Heat Resistant ABS | Detecting Surface Material | Heat Resistant ABS |
Specification/Dimensions
-
Detection Distance L1 (Classification)(mm)
- ~5
-
Operating Environment
- Standard
- Oil Resistance Reinforcement
- Cold Resistance
-
Head Size Depth (range)(mm)
- 20.1~30
- 30.1~40
- 40.1~50
- 50.1~60
-
Head Size Depth(mm)
-
The Size and Width of Detection Head (Range)(mm)
- 5.1~10
- 15.1~20
- 20.1~30
- 30.1~40
-
The Size and Width of Detection Head(mm)
-
The Size and Height of Detection Head (Range)(mm)
- 5.1~10
- 10.1~20
- 20.1~30
- 30.1~40
- 40.1～
-
The Size and Height of Detection Head(mm)
-
Acquired Standards
- CE
- IEC
- CCC
-
Types
- Standard Type
- Standard type (metal direct mounting supported)
-
Power Type
-
Power Supply Voltage
- 12-24 V DC
- DC12-24V
- AC100-220V
-
Output Mode
- AC 2-wire connection
- DC 2-wire connection
- Direct current 3-wire type NPN
- Direct current 3-wire type PNP
-
Operation Mode
- NC
- NO
-
Connection Method
-
Cable Length(m)
-
Different Frequency Type
- Different frequency
- Standard
-
Cable Specifications
- Vinyl (PVC)-insulated round cord, φ2.9, 3-core
- Vinyl (PVC)-insulated round cord, φ4, 2-core/3-core
- Vinyl (PVC)-insulated round cord, φ6, 2-core
- Vinyl (PVC)-insulated round cord, φ6, 2-core/3-core
-
Detection distance L1 details(mm)
- 2
- 5
- 7
- 10
- 11 to 20
- 12
- 20
-
Standard sensing object
- Iron 8×8×1mm
- Iron 15×15×1mm
- Iron 18×18×1mm
- Iron 30×30×1mm
- Iron 40×40×1mm
- 50 x 50 x 1 mm, steel
- Iron 50×50×1mm
-
Sensing Distance(mm)
- 20
-
Protection Structure
- IP67
-
type
- TL-N
- TL-N/TL-Q
- TL-N/TL-Q/TL-G
- TL-Q
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 5 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Proximity sensor with built-in amplifier, screw type, all-metal type
- Proximity sensor with built-in amplifier, heat-resistant type
- Proximity Sensor, Long Detection Range, Screw-In Type
- Flat-Type Capacitive Proximity Sensor [E2K-F]
- Long-distance type ESD safe proximity sensor E2K-C
- Small diameter type proximity sensor E2E
- Welding Proximity Sensor, E2EW Series (Quadruple distance model)
- Welding Proximity Sensor, E2EW Series (Single distance model)
Customers Who Viewed This Item Also Viewed
-
TL-W Standard Flat Proximity SensorOMRON
Standard Price : MYR 154.38-
Days to Ship : 2 Day(s) or more
-
![Long Distance Proximity Sensor [E2EM]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000398993_001.jpg?$product_recommend_b$)
Long Distance Proximity Sensor [E2EM]OMRON
Standard Price : MYR 418.91-
Days to Ship : 2 Day(s) or more
-
![Ultra Compact Proximity Sensor [E2S]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2S_DS_J_1_1.jpg?$product_recommend_b$)
Ultra Compact Proximity Sensor [E2S]OMRON
Standard Price : MYR 123.88-
Days to Ship : 1 Day(s) or more
-
Long-distance type ESD safe proximity sensor E2K-COMRON
Standard Price : MYR 744.79-
Days to Ship : 2 Day(s) or more
-
![Long Size Proximity Sensor [E2E2]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2E2_DS_J_1_1.jpg?$product_recommend_b$)
Long Size Proximity Sensor [E2E2]OMRON
Standard Price : MYR 416.61-
Days to Ship : 5 Day(s) or more
-
![Low Profile / Reflective Connector Type Photo/Macro Sensor [EE-SPX□, EE-SPY□]](//my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000419920.jpg?$product_recommend_b$)
Low Profile / Reflective Connector Type Photo/Macro Sensor [EE-SPX□, EE-SPY□]OMRON
Standard Price : MYR 107.76-
Days to Ship : 2 Day(s) or more
![Long Distance Proximity Sensor [E2EM]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221000398993_001.jpg?$product_recommend_b$)
![Ultra Compact Proximity Sensor [E2S]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2S_DS_J_1_1.jpg?$product_recommend_b$)
![Long Size Proximity Sensor [E2E2]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/IMG_WIN_E2E2_DS_J_1_1.jpg?$product_recommend_b$)
![Low Profile / Reflective Connector Type Photo/Macro Sensor [EE-SPX□, EE-SPY□]](http://my.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221000419920.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy