(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here. 

MWI Series (Ultra Small) (Part Numbers)

MWI Series (Ultra Small)
  • Volume Discount

[Specifications]·A 45 mm × 55 mm space saving connector terminal block

  • c-UL
  • For Signal
  • Space-saving
  • Sensor
  • PLC

● Optimal for installation in locations where space is limited
● Equipped with general purpose MIL20 core connector input
● Captive screw terminal block for easy mounting and wire connection

Part Number

Configured Part Number is shown.

MWI-M20-TB20

Specification Table

ModelNumber of Poles
MWI-M20-TB2020

Overview of Specifications


· Check the specifications of the connector array of each device on equipment side before ordering.
Material
Terminal BlockPBT (Polybutylene terephthalate)
CasePPE (Polyphenylene ether)
SubstrateGE4F (Glass Epoxy)
Specifications
Rated insulation voltage24 V AC/DC
Rated Current1 A
Insulation Resistance1,000 MΩ or more (at 500 V DC megger)
Withstand Voltage2,000 V AC 60 Hz for 1 min (between grounds)
Terminal Block ScrewM3 × 6L (-in)
Tightening Torque0.5 to 0.8 N·m
Pitch Between Terminals7.62 mm
Terminal Block Conforming Wire1.25 mm2 / AWG 16 or less
Ambient Temperature−20°C to +55°C (When energized)
−30°C to +85°C (When off)
Ambient Humidity45% to 85%
ULE184879
Conforming Crimp Terminal
1.25-3
F1.25.-3
 
Connection Information
ModelNumber of PolesMounting Connector (Hirose) MaleRecommended harnessWeight (g)
MWI-M20-TB2020HIF3BA-20PA-2.54DSA71HIFS Series111
Part Number
MWI-M20-TB20
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHS

MYR 236.86

1 Piece(s)Available 4 Day(s) or more 10

Loading...

  1. 1

Basic Information

Connector MIL Connector Number of connector cores(Pole) 20 Mounting Method With DIN rail
Supported equipment manufacturer Mitsubishi Electric / Omron Pitch Between Terminals(mm) 7.62 Supported equipment PLC
Dimension width(mm) 55 Terminal Block Screw M3 Representative Standard CUL
Dimension vertical(mm) 47 Dimension depth(mm) 50 Supported crimp terminal Y Terminal / Round Terminal
Number of terminal block electrodes(Pole) 20 Terminal block screw type Spring Up

Please check the type/dimensions/specifications of the part MWI-M20-TB20 in the MWI Series (Ultra Small) series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)