(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Ribbon cable for system wiring 4-core 1.25 sq 100 m (Part Numbers)
Click this image to zoom it.
Move the mouse over the image to zoom
Cable with D-sub connector compliant with PROFIBUS. A harness using a WAGO PROFIBUS fieldbus connector and a JMACS PUROFIBUS compliant cable
PROFIBUS-Compatible Cable with D-sub Connectors
● Harness using WAGO PROFIBUS field bus connectors and JMACS PROFIBUS-compatible cables.
· Terminal resistance is set to OFF when shipped.
· When connecting both ends, 1A→2A and 1B→2B are connected.
· Be careful not to set the slide switch to ON (terminal resistance enabled) except at the ends of the segment.
· Set the slide switch to ON if it is on the terminal ends of the network.
Part Number
Configured Part Number is shown.
FNPB-DS-PP-F-[0.5-50/0.1]
Specification Table
| Connector Type | - | Shape Specification Type | - | Cable Type | - | Specified Length (m) | - | Add free additional work/custom No. to the end of the model number |
| FNPB-DS | P | F | 1 |
| Connector Type | Shape Specification Type | Shape Specification Type | Cable Type | Specified Length |
| FNPB-DS 750-960 PROFI-BUS Field Connector WAGO | P (Male/Cut-Off) |  |  | 0.5 to 50 0.1 m Increment Specifiable |
| PP (Male/Male) Opposite Direction |  | |||
| PPR (Male/Male) Same Direction |  |
Wire Connection Drawing
| CN1 | Cable color | CN2 |
| 1A | Green | 2A |
| 1B | Red | 2B |
Overview of Specifications
| Specified Length (m) | Up to 0.9 | 1 to 4 | 4.1 to 50 |
| Tolerance | + 20 mm | + 50 mm | +3% of Specified Length |
Basic Information
| Connector shape | D-sub | Supported manufacturers | Other | Connector type | PROFIBUS |
|---|---|---|---|---|---|
| CN2 shape specifications | D-sub 9-Pin Male Opposite Direction | Connector Specifications CN1 | D-sub 9-Pin Male | Connector Specifications CN2 | D-sub 9-Pin Male |
| Cable Outer Diameter (OD)(mm) | 8.0 | Conductor configuration | 22 AWG × 1 P |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Sensor Cables M8 (Standard Fixed Type / Flexible Shielded Type)
- Sensor Cables M12 (Standard Fixed Type / Flexible Shielded Type)
- Relay Connector Set for Sensor Cables
- Camera Cables RJ45 port to M8/M12 Connector Drag Chain Type
- Sensor cable NEBU series straight or angled outlet
- M8/M12 Connector Cable Compatible with Sensors
- Extension cable M12 8-pin 3 m male to female
- Power connector NEBU series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy