Conveyor with single row plastic chain, head drive, pulley diameter 69.7 mm (Part Numbers)

Economical conveyor with a reasonable structure design, enabling localized production. Multiple types of models are available to meet customers' design requirements for different usage scenarios, providing better selection options.
E-CVSPC: Single-row plastic chain type, easy maintenance, and causes minimal product damage; medium load type, suitable for special environments, featuring antistatic, corrosion resistance, and non-magnetic characteristics, ideal for conveying small category products.

Feature 1: Using a plastic chain can reduce damage to the product during conveyance.
Feature 2: Operation is convenient when performing maintenance or replacing the plastic chain.
Feature 3: Deviation is unlikely to occur. (When following the specified conveying direction)
Feature 4: The conveyor uses a combination of aluminum profile and plastic chain, achieving an overall lightweight design.

Please follow the selection procedure to , select the type and parameters, and then proceed with ordering.

	Type	-	B	-	L	-	Motor selection					-	Plastic belt chain specification	-	Motor manufacturer selection
							Output power	-	Specification	-	Gear head reduction ratio
When there is no motor or gear head	E-CVSPC E-CVSPC	- -	20 20	- -	1000 1000	- -	25 25	- -	SCM NM	- -	25 NH	- -	H H	- -	G R

■ Specification table

Type	Type	Machine characteristics
E-CVSPC	Light load retaining edge guiding type	Suitable for special environment applications, featuring antistatic, corrosion resistance, and non-magnetic characteristics, and is applicable for the conveyance of small category products.

 

Type	B selection	L Specified unit 5 mm	Motor selection			Plastic belt chain specification	Motor
			Output power (W)	Specification	Gear head reduction ratio
E-CVSPC	20	300 to 3000	25 40	SCM (Single-phase 220 V speed regulation type)	5 7.5 10 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180	H(General use · white) D(For conductivity · black)	G(GPG - Taiban motor) J(JSCC - Jingyan motor)
				INV (3-phase 220 V inverter type)
				NM(without motor)	NH(without gear head)		R(without motor and gear head)

When selecting without motor and without gear head, the motor installation hole pitch will vary depending on the motor output power.
If stepper or servo motor automatic control is required, you can select the version without motor and without gear head.
When selecting without motor and without gear head, the main unit will be delivered as parts. Please assemble by the customer according to the assembly procedure instruction manual included in the same package.
When selecting the INV inverter motor, the inverter is delivered together as an accessory.
 

	Type	-	B	-	L	-	Motor selection					-	Plastic chain specification	-	Motor manufacturer selection	-	Alteration
							Output power	-	Specification	-	Gear head reduction ratio
	E-CVSPC	-	20	-	1000	-	25	-	SCM	-	12.5	-	H	-	G	-	SCB

 

Alterations	Code	Spec
Reverse motor installation position	MK	The motor installation position can be changed. Ordering code MK Only the head drive type can be specified.
Mounting bracket for speed controller	SCB	Comes with a mounting bracket for the speed controller. Ordering code SCB
Conveyor belt reverse conveyance	FX	Reverse conveyance. Ordering code FX
Conveyor belt bidirectional conveyance	SX	Bidirectional conveyance. Ordering code SX
Increase the number of nuts in the profile groove. Select only when the standard configuration is insufficient (For the quantity of standard specifications, refer to the standard nut allocation table for the profile groove.)	ANQ	Increase the number of nuts in the profile groove Ordering code ANQ5   Code Quantity Configuration type ANQ 5 to 10 Accessory

(1) When installing onto equipment, ensure the flatness of the aluminum profile is maintained.
(2) Do not disassemble or modify the conveyor by yourself to avoid causing performance defects.
(3) Due to differences in the operating environment of the conveyor, MISUMI conveyors do not come with a power supply, cable, or switch.
(4) In application, due to issues with the structural strength of the model and the amount of deformation of the body, do not exceed the allowable load or length and width when selecting a model.
(5) Even when the motor is operating in a normal state, its surface temperature may sometimes exceed 70℃. Please exercise caution to avoid burns.
(6) When the plastic chain material rubs against the aluminum profile at high speed, it can easily generate high noise levels (over 60 dB). If noise reduction is required and the operating condition allows, lubricant can be applied to the contact surface for treatment.
(7) MISUMI conveyors are adjusted at the factory according to the specified conveying direction. If the actual conveying direction is opposite to the specified direction, normal operation cannot be guaranteed.
(If the conveying direction is not specified, the default adjustment will be made according to the standard conveying direction as shown below.)