(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Conveyor with single row plastic chain, head drive, pulley diameter 69.7 mm
Part Number
Configured Part Number is shown.
Product overview
Economical conveyor with a reasonable structure design, enabling localized production. Multiple types of models are available to meet customers' design requirements for different usage scenarios, providing better selection options.
E-CVSPC: Single-row plastic chain type, easy maintenance, and causes minimal product damage; medium load type, suitable for special environments, featuring antistatic, corrosion resistance, and non-magnetic characteristics, ideal for conveying small category products.
E-CVSPC: Single-row plastic chain type, easy maintenance, and causes minimal product damage; medium load type, suitable for special environments, featuring antistatic, corrosion resistance, and non-magnetic characteristics, ideal for conveying small category products.
Product feature
Feature 1: Using a plastic chain can reduce damage to the product during conveyance.
Feature 2: Operation is convenient when performing maintenance or replacing the plastic chain.
Feature 3: Deviation is unlikely to occur. (When following the specified conveying direction)
Feature 4: The conveyor uses a combination of aluminum profile and plastic chain, achieving an overall lightweight design.
Feature 2: Operation is convenient when performing maintenance or replacing the plastic chain.
Feature 3: Deviation is unlikely to occur. (When following the specified conveying direction)
Feature 4: The conveyor uses a combination of aluminum profile and plastic chain, achieving an overall lightweight design.
Specification overview
■ Material table
| Part name |  Material |  Surface treatment |
| Plastic chain | Polyacetal | - |
| Plastic sprocket | Nylon | - |
| Profile | Aluminum | Electrophoresis |
| Motor cover | Aluminum | Painted baked paint |
| Pulley holder | Zinc alloy | Painted baked paint |
■ E-CVSPC plastic chain specification table
| Type | Number of links | Number of rows | Application | Appearance color | Material | Pitch | |
| Type | No. | ||||||
| H | 40 | 4 or more | 1 row | General use | White | Polyacetal | 12.7 |
| D | 40 | For conductive use | Black | Polyacetal | 12.7 | ||
Dimensional drawing
E-CVSPC
Motor specification: 40W*
The plastic chain and sprocket are 40 series.
When L ≥ 1000, one belt support roller is included; when L ≥ 2000, two belt support rollers are included.
When L ≤ 700, there is no countersunk hole at position F, and four nuts are pre-installed on one side inside the aluminum profile groove;
when L > 700, a countersunk hole for nut insertion is reserved by default at position F, so no additional machining is required.
When selecting a speed control motor, the speed controller is supplied as an accessory, is not installed on the main unit, and does not include a mounting bracket.
If a bracket for the speed controller is required, please use additional machining (SCB).
*Differences in power only affect the motor size. For the A dimension, please refer to the table below; the external dimensions of the other components remain the same.
■ A dimension detail table
The plastic chain and sprocket are 40 series.When L ≥ 1000, one belt support roller is included; when L ≥ 2000, two belt support rollers are included.When L ≤ 700, there is no countersunk hole at position F, and four nuts are pre-installed on one side inside the aluminum profile groove;when L > 700, a countersunk hole for nut insertion is reserved by default at position F, so no additional machining is required.
When selecting a speed control motor, the speed controller is supplied as an accessory, is not installed on the main unit, and does not include a mounting bracket.If a bracket for the speed controller is required, please use additional machining (SCB).
*Differences in power only affect the motor size. For the A dimension, please refer to the table below; the external dimensions of the other components remain the same.
■ A dimension detail table
| Motor power | Motor | Reduction ratio | A | |
| Specification | Manufacturer | |||
| 25W | Inverter type | GPG | 3 to 18 | L118 |
| 25 to 180 | L130 | |||
| Speed regulation type | 3 to 18 | L129 | ||
| 25 to 180 | L141 | |||
| Inverter type | JSCC | 3 to 18 | L119 | |
| 25 to 180 | L130 | |||
| Speed regulation type | 3 to 18 | L129 | ||
| 25 to 180 | L140 | |||
| 40W | Inverter type | GPG | 3 to 18 | L148 |
| 25 to 180 | L166 | |||
| Speed regulation type | 3 to 18 | L159 | ||
| 25 to 180 | L177 | |||
| Inverter type | JSCC | 3 to 18 | L152 | |
| 25 to 180 | L172 | |||
| Speed regulation type | 3 to 18 | L162 | ||
| 25 to 180 | L182 | |||
Enlarged view of profile cross-section (left and right symmetrical)
Standard nut allocation table for profile groove: L value (center distance unit: mm)Nuts are shipped as accessories with the conveyor and are not displayed in the CAD model.
Standard nut allocation table for profile groove: L value (center distance unit: mm)
Nuts are shipped as accessories with the conveyor and are not displayed in the CAD model. | L300 to 999 | L1000 to 1499 | L1500 or more | Position | Specification | Configuration type |
| 4PCS | 6PCS | 8PCS | X section (left and right) | M3 (hex) | Accessory |
| 4PCS | 6PCS | 8PCS | Y section (left and right) | M6 (square) | Accessory |
Specification table
Please follow the selection procedure 
to 
, select the type and parameters, and then proceed with ordering.
■ Specification table
When selecting without motor and without gear head, the motor installation hole pitch will vary depending on the motor output power.
If stepper or servo motor automatic control is required, you can select the version without motor and without gear head.
When selecting without motor and without gear head, the main unit will be delivered as parts. Please assemble by the customer according to the assembly procedure instruction manual included in the same package.
When selecting the INV inverter motor, the inverter is delivered together as an accessory.
to 
, select the type and parameters, and then proceed with ordering. | Type | - |  B | - |  L | - | Motor selection | - |  Plastic belt chain specification | - | Motor manufacturer selection | ||||
 Output power | - |  Specification | - |  Gear head reduction ratio | |||||||||||
| When there is no motor or gear head | E-CVSPC E-CVSPC | - - | 20 20 | - - | 1000 1000 | - - | 25 25 | - - | SCM NM | - - | 25 NH | - - | H H | - - | G R |
■ Specification table
| Type | Type | Machine characteristics |
| E-CVSPC | Light load retaining edge guiding type | Suitable for special environment applications, featuring antistatic, corrosion resistance, and non-magnetic characteristics, and is applicable for the conveyance of small category products. |
| Type | B selection | L Specified unit 5 mm | Motor selection | Plastic belt chain specification | Motor | ||||||||||||||||||||||
| Output power (W) | Specification | Gear head reduction ratio | |||||||||||||||||||||||||
| E-CVSPC | 20 | 300 to 3000 | 25 40 | SCM (Single-phase 220 V speed regulation type) |
| H(General use · white) D(For conductivity · black) | G(GPG - Taiban motor) J(JSCC - Jingyan motor) | ||||||||||||||||||||
| INV (3-phase 220 V inverter type) | |||||||||||||||||||||||||||
| NM(without motor) | NH(without gear head) | R(without motor and gear head) | |||||||||||||||||||||||||
When selecting without motor and without gear head, the motor installation hole pitch will vary depending on the motor output power.If stepper or servo motor automatic control is required, you can select the version without motor and without gear head.When selecting without motor and without gear head, the main unit will be delivered as parts. Please assemble by the customer according to the assembly procedure instruction manual included in the same package. When selecting the INV inverter motor, the inverter is delivered together as an accessory.■ Transmission capacity
Test motor: JSCC (J) timing pulley transmission ratio 1:1. Chain width: 20 mm, roller center distance: L = 3000 mm
The chart shows the transport capacity under horizontal conditions.
The transport capacity will vary depending on the operating condition.
When selecting a speed regulation motor, the transport capacity does not increase as the speed decreases.
Test motor: JSCC (J) timing pulley transmission ratio 1:1. Chain width: 20 mm, roller center distance: L = 3000 mmThe chart shows the transport capacity under horizontal conditions.The transport capacity will vary depending on the operating condition.When selecting a speed regulation motor, the transport capacity does not increase as the speed decreases.■ Gear head reduction ratio
INV inverter type: Reference value of chain belt speed when the motor speed is 1300 rpm (50 Hz).
INV inverter type: Reference value of chain belt speed when the motor speed is 1300 rpm (50 Hz). | Gear head reduction ratio | Belt chain speed (m/min) | |
| SCM speed regulation type | INV inverter type | |
| 5 | 29.0 to 48.3 | 60.1 |
| 7.5 | 19.3 to 32.2 | 40.1 |
| 10 | 14.5 to 24.2 | 30.1 |
| 12.5 | 11.6 to 19.3 | 24.1 |
| 15 | 9.7 to 16.1 | 20.0 |
| 18 | 8.1 to 13.4 | 16.7 |
| 25 | 5.8 to 9.7 | 12.0 |
| 30 | 4.8 to 8.1 | 10.0 |
| 36 | 4.0 to 6.7 | 8.4 |
| 50 | 2.9 to 4.8 | 6.0 |
| 60 | 2.4 to 4.0 | 5.0 |
| 75 | 1.9 to 3.2 | 4.0 |
| 90 | 1.6 to 2.7 | 3.3 |
| 100 | 1.4 to 2.4 | 3.0 |
| 120 | 1.2 to 2.0 | 2.5 |
| 150 | 1.0 to 1.6 | 2.0 |
| 180 | 0.8 to 1.3 | 1.7 |
Alteration
 | Type | - | B | - | L | - | Motor selection | - | Plastic chain specification | - | Motor manufacturer selection | - | Alteration | ||||
| Output power | - | Specification | - | Gear head reduction ratio | |||||||||||||
| E-CVSPC | - | 20 | - | 1000 | - | 25 | - | SCM | - | 12.5 | - | H | - | G | - | SCB | |
| Alterations | Code | Spec | ||||||
Reverse motor installation position | MK | The motor installation position can be changed. Ordering code MK Only the head drive type can be specified. | ||||||
Mounting bracket for speed controller | SCB | Comes with a mounting bracket for the speed controller. Ordering code SCB | ||||||
Conveyor belt reverse conveyance | FX | Reverse conveyance. Ordering code FX | ||||||
Conveyor belt bidirectional conveyance | SX | Bidirectional conveyance. Ordering code SX | ||||||
Increase the number of nuts in the profile groove. Select only when the standard configuration is insufficient(For the quantity of standard specifications, refer to the standard nut allocation table for the profile groove.) | ANQ | Increase the number of nuts in the profile groove Ordering code ANQ5
|
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-CVSPC-20-[300-3000/5]-[25,40]-[INV,NM,SCM]-NH-[D,H]-[G,J,R] |
| E-CVSPC-20-[300-3000/5]-[25,40]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-[D,H]-[G,J,R] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship |
|---|---|---|---|---|
- | 1 Piece(s) | 17 Day(s) or more | ||
- | 1 Piece(s) | 17 Day(s) or more |
Loading...
Application Industry
| Equipment Production | Semiconductor | Lithium Battery | ||
 |  |  | ||
| Food | Electronic & Electrical | Robot | ||
 |  |  |
Precaution
(1) When installing onto equipment, ensure the flatness of the aluminum profile is maintained.
(2) Do not disassemble or modify the conveyor by yourself to avoid causing performance defects.
(3) Due to differences in the operating environment of the conveyor, MISUMI conveyors do not come with a power supply, cable, or switch.
(4) In application, due to issues with the structural strength of the model and the amount of deformation of the body, do not exceed the allowable load or length and width when selecting a model.
(5) Even when the motor is operating in a normal state, its surface temperature may sometimes exceed 70℃. Please exercise caution to avoid burns.
(6) When the plastic chain material rubs against the aluminum profile at high speed, it can easily generate high noise levels (over 60 dB). If noise reduction is required and the operating condition allows, lubricant can be applied to the contact surface for treatment.
(7) MISUMI conveyors are adjusted at the factory according to the specified conveying direction. If the actual conveying direction is opposite to the specified direction, normal operation cannot be guaranteed.
(If the conveying direction is not specified, the default adjustment will be made according to the standard conveying direction as shown below.)
(2) Do not disassemble or modify the conveyor by yourself to avoid causing performance defects.
(3) Due to differences in the operating environment of the conveyor, MISUMI conveyors do not come with a power supply, cable, or switch.
(4) In application, due to issues with the structural strength of the model and the amount of deformation of the body, do not exceed the allowable load or length and width when selecting a model.
(5) Even when the motor is operating in a normal state, its surface temperature may sometimes exceed 70℃. Please exercise caution to avoid burns.
(6) When the plastic chain material rubs against the aluminum profile at high speed, it can easily generate high noise levels (over 60 dB). If noise reduction is required and the operating condition allows, lubricant can be applied to the contact surface for treatment.
(7) MISUMI conveyors are adjusted at the factory according to the specified conveying direction. If the actual conveying direction is opposite to the specified direction, normal operation cannot be guaranteed.
(If the conveying direction is not specified, the default adjustment will be made according to the standard conveying direction as shown below.)
Basic Information
| Drive Module Position | Head Drive | Belt Type | Plastic Chain | Features | Width Narrow |
|---|---|---|---|---|---|
| Motor Voltage | 220 V | Max. Mass of Conveyed Material(kg) | 20 | Tail Roller Dia. D (Tail Transfer Part R)(mm) | 57.1 |
| Drive Roller Dia.(mm) | 57.1 | Type | Light retaining edge guiding type | Maximum conveying speed of this series(m/min) | 60.1 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Flat Belt Conveyor Full Belt Type - With Meandering Prevention Crosspiece, Head Drive, 2-Groove Frame (Pulley Dia. 30mm)
- Flat Belt Conveyor SV Series - Center Drive, 2-Groove Frame
- Flat Belt Conveyor with Backlight, Center Drive, Pulley Dia. 50mm
- Conveyor with double-row plastic chain, head drive, pulley diameter 69.7 mm
- Belt Conveyor Mini III Standard Type Belt Conveyor DMH
- Belgotchi TYPE34 Belt Conveyor for Swayless Models
- Belgotch TYPE34 Belt Cleat Type (Head Drive)
- Belt Conveyors Plastic Chain Conveyor (Plate Carrier Type)
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy