(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
4560, Slot Width 10mm Aluminum Frames (Part Numbers)
Part Number
Configured Part Number is shown.
LCF10-4560-[50-2800/0.5]
Product overview
Domestic universal European standard profile with groove width of 10 mm and side length of 45 or 60 aluminum profile.
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.
Suitable for structures such as small equipment hood, cabinet, and display column.
Standard and heavy-duty 4-sided groove, 2-side groove, and crowned type are available for selection.
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.
Suitable for structures such as small equipment hood, cabinet, and display column.
Standard and heavy-duty 4-sided groove, 2-side groove, and crowned type are available for selection.
Product feature
1. Complies with the GB industrial aluminum profile standard, with 8 to 10μ clear anodized surface for scratch resistance.
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
Dimensional drawing
Specification table
| Part Number |
| LCF10-4560-1000 |
Type ( Type) |  Profile cross-section |  Total length L | Profile type | Weight kg/m | Cross-sectional moment of inertia | |||
| Fixed type | Specified type | Fixed type | Specified type | Lx (cm4) | Ly (cm4) | |||
| KLCF10 | LCF10 | 4560 | 4000 | 50–4000 (specified unit 0.5 mm) | Standard | 2.52 | 26.72 | 16.01 |
| - | LCFW10 | Heavy type | 2.9 | 30.09 | 17.79 | |||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| LCF10-4560-[50-2800/0.5] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Overall Length L (mm) |
|---|---|---|---|---|---|
- | 1 Piece(s) | 12 Day(s) or more | 50 ～ 2800 |
Loading...
Precaution
1. The profile surface is covered with a protective film. Due to adhesion from the glue, a small amount of aluminum debris may remain. This is not a quality problem, and all aluminum debris will be removed once the protective film is taken off.
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
Alteration
Various alterations are available, including 45° miter cutting, end face tapping, wrench hole, counterbored hole, whistle hole, and more.
| Alteration name | Example of alteration code | Specification drawing | Machining content / corresponding accessory |
| End face tapping (center hole) | LTP/RTP/TPW |  | Threaded holes machined on the end of the aluminum profile Accessories used for this alteration: Cup head bolt |
| 45-degree cutting | L□T45/R□T45 |  | 45-degree angle cutting |
| Open wrench hole at fixed position | LWP/RWP |  | Concealed connection Accessories used for this alteration: Cup head bolt Elastic fastener |
| Drill countersunk hole at specified position | Z8/XA |  | Drill a counterbored hole at any specified position on the left end face Accessories used for this alteration: Cup head bolt |
| S hole | LSH/RSH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Whistle (built-in connection) |
| M hole | LMH/RMH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Riveted connector (internal connection) |
Application example
With the 4560 series profile, you can easily and simply assemble small and medium-sized frames, covers, racks, and other modules for automation equipment.
Related product
| Recommended product 1 | Recommended product 2 | Recommended product 3 |
| Economy European standard 40 series aluminum profile, groove width 8 mm | Economy single side tabbed bracket, special for aluminum profile | Economy PVC plate, polyvinyl chloride plate, straight |
 |  |  |
Basic Information
| Standard Extrusion Size(mm) | 60 | Number of Slotted Surfaces | Four-Side Slots | Surface Treatment | Clear Anodize Processing |
|---|---|---|---|---|---|
| Extrusion Series | MISUMI Economy Series LCF 45/50/60 (Slot Width 10 mm) | Extrusion Type | Rectangle Shape | Surface Milled | Not Provided |
| Material | 6063-T5 | Extrusion Type | ① Standard | L Dimension Fixed, Specified | Specified |
| Weight(kg/m) | 2.37 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- 3030, Slot Width 8mm Aluminum Frames
- 4545, Slot Width 10mm Aluminum Frames
- 9090 , Slot Width 10mm Aluminum Frames
- 6060, Slot Width 10mm Aluminum Frames
- 5050 / 50100 , Slot Width 10mm Aluminum Frames
- 100100, Slot Width 10mm Aluminum Frames
- 4590, Slot Width 10mm Aluminum Frames
- 2040 Door Frames, Slot Width 8mm
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy