(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Support Pins - Stepped - Tapped (Part Numbers)
"Locating Pins with the Height configurable in a wide range. Regardless of Round Shape or Diamond Shape, the horizontal locating and height adjustment are enabled."
Part Number
Configured Part Number is shown.
[ ! ]SUS304 may not be polished and may have no centering hole.
| [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Round | Diamond |
| ①S45C Equivalent | Black Oxide | - | SHPAB | SDPAB |
| ②S45C Equivalent | Hard Chrome Plating | Plating Hardness: 750HV ~ | SHPAR | SDPAR |
| ③S45C Equivalent | Black Oxide | Treated Hardness: 45 ~ 50HRC | SHPAHB | - |
| ④S45C Equivalent | Hard Chrome Plating | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | SHPAHR | - |
| ⑤SUS304 | - | - | SHPASU | SDPASU |
| ⑥SUS440C or 13Cr stainless | - | Treated Hardness: 50 ~ 55HRC | SHPAC | SDPAC |
Specifications
| Part Number | - | L | - | P | - | B |
| SDPASU20 | - | L50.00 | - | P8.00 | - | B3 |
| Part Number | L 0.01mm Increment | P 0.01mm Increment | B Selection | m | d | M (Coarse) | * Tightening Torque N • cm | ℓ1 | W1 | (W) | ℓ2 | Compliance with Standard Internal Thread | Compliance with Standard Internal Thread | |||||||||||
| Type | D | ① SHPAB | ② SHPAR | ③ SHPAHB | ④ SHPAHR | ⑤ SHPASU | ⑥ SHPAC | ① SDPAB | ② SDPAR | ③ SDPAHB | ④ SDPAHR | ⑤ SDPASU | ⑥ SDPAC | |||||||||||
< Round > SHPAB SHPAR SHPAHB SHPAHR SHPASU SHPAC < Diamond > SDPAB SDPAR SDPASU SDPAC | 6 | 10.00~50.00 | 3.00~4.00 | 2 3 4 5 | 1 | - | M3 | 98 | - | 5 | 1.0 | 8 | ● | ● | ● | ● | ● | ● | ● | ● | - | - | ● | ● |
| 8 | 3.00~6.00 | 1 | - | M3 | 98 | - | 7 | 1.5 | 8 | ● | ● | ● | ● | ● | ● | ● | ● | - | - | ● | ● | |||
| 10 | 20.00~80.00 | 2 | 6 | M3 | 98 | 6 | 8 | 1.5 | 8 | ● | ● | ● | ● | ● | ● | ● | ● | - | - | ● | ● | |||
| 12 | 4.00~8.00 | 2 | 8 | M5 | 461 | 6 | 10 | 1.8 | 10 | ● | ● | ● | ● | ● | ● | ● | ● | - | - | ● | ● | |||
| 15 | 4.00~10.00 | 3 | 10 | M5 | 461 | 9 | 13 | 2.2 | 10 | ● | ● | ● | ● | ● | ● | ● | ● | - | - | ● | ● | |||
| 20 | 5.00~10.00 | 3 | 12 | M8 | 1911 | 9 | 17 | 2.5 | 10 | ● | ● | ● | ● | ● | ● | ● | ● | - | - | ● | ● | |||
| 25 | 8.00~15.00 | 3 | 16 | M10 | 3783 | 10 | 20 | 3 | 10 | ● | ● | ● | ● | ● | ● | ● | ● | - | - | ● | ● | |||
*The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >>P.2297.) Not applicable when using locking adhesives or lock washers.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SDPAB6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5] |
| SDPAB8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SDPAB10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SDPAB12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5] |
| SDPAB15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5] |
| SDPAB20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5] |
| SDPAB25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| SDPAC6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5] |
| SDPAC8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SDPAC10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SDPAC12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5] |
| SDPAC15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5] |
| SDPAC20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5] |
| SDPAC25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| SDPAR6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5] |
| SDPAR8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SDPAR10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SDPAR12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5] |
| SDPAR15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5] |
| SDPAR20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5] |
| SDPAR25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| SDPASU6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5] |
| SDPASU8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SDPASU10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SDPASU12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5] |
| SDPASU15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5] |
| SDPASU20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5] |
| SDPASU25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| SHPAB6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5] |
| SHPAB8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SHPAB10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SHPAB12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5] |
| SHPAB15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5] |
| SHPAB20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5] |
| SHPAB25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| SHPAC6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5] |
| SHPAC8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SHPAC10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SHPAC12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5] |
| SHPAC15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5] |
| SHPAC20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5] |
| SHPAC25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| SHPAHB6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5] |
| SHPAHB8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SHPAHB10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SHPAHB12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5] |
| SHPAHB15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5] |
| SHPAHB20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5] |
| SHPAHB25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| SHPAHR6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5] |
| SHPAHR8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SHPAHR10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SHPAHR12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5] |
| SHPAHR15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5] |
| SHPAHR20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5] |
| SHPAHR25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| SHPAR6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5] |
| SHPAR8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SHPAR10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SHPAR12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5] |
| SHPAR15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5] |
| SHPAR20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5] |
| SHPAR25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| SHPASU6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5] |
| SHPASU8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SHPASU10-L[20-80/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SHPASU12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5] |
| SHPASU15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5] |
| SHPASU20-L[20-80/0.01]-P[5-10/0.01]-B[2,3,4,5] |
| SHPASU25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Material | Surface Treatment | Hardening | Hardness | Outer Dia. D (mm) | B (mm) | L (mm) | P (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 6 | 2 ～ 5 | 10 ～ 50 | 3 ～ 4 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 8 | 2 ～ 5 | 10 ～ 50 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 10 | 2 ～ 5 | 20 ～ 80 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 12 | 2 ～ 5 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 15 | 2 ～ 5 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 20 | 2 ～ 5 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 6 | 2 ～ 5 | 10 ～ 50 | 3 ～ 4 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 8 | 2 ～ 5 | 10 ～ 50 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 10 | 2 ～ 5 | 20 ～ 80 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 12 | 2 ～ 5 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 15 | 2 ～ 5 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 20 | 2 ～ 5 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 6 | 2 ～ 5 | 10 ～ 50 | 3 ～ 4 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 8 | 2 ～ 5 | 10 ～ 50 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 10 | 2 ～ 5 | 20 ～ 80 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 12 | 2 ～ 5 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 15 | 2 ～ 5 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 20 | 2 ～ 5 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 6 | 2 ～ 5 | 10 ～ 50 | 3 ～ 4 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 8 | 2 ～ 5 | 10 ～ 50 | 3 ～ 6 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 10 | 2 ～ 5 | 20 ～ 80 | 3 ～ 6 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 12 | 2 ～ 5 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 15 | 2 ～ 5 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 20 | 2 ～ 5 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 6 | 2 ～ 5 | 10 ～ 50 | 3 ～ 4 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 8 | 2 ～ 5 | 10 ～ 50 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 10 | 2 ～ 5 | 20 ～ 80 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 12 | 2 ～ 5 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 15 | 2 ～ 5 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 20 | 2 ～ 5 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 6 | 2 ～ 5 | 10 ～ 50 | 3 ～ 4 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 8 | 2 ～ 5 | 10 ～ 50 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 10 | 2 ～ 5 | 20 ～ 80 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 12 | 2 ～ 5 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 15 | 2 ～ 5 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 20 | 2 ～ 5 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 6 | 2 ～ 5 | 10 ～ 50 | 3 ～ 4 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 8 | 2 ～ 5 | 10 ～ 50 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 10 | 2 ～ 5 | 20 ～ 80 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 12 | 2 ～ 5 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 15 | 2 ～ 5 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 20 | 2 ～ 5 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 6 | 2 ～ 5 | 10 ～ 50 | 3 ～ 4 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 8 | 2 ～ 5 | 10 ～ 50 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 10 | 2 ～ 5 | 20 ～ 80 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 12 | 2 ～ 5 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 15 | 2 ～ 5 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 20 | 2 ～ 5 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 6 | 2 ～ 5 | 10 ～ 50 | 3 ～ 4 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 8 | 2 ～ 5 | 10 ～ 50 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 10 | 2 ～ 5 | 20 ～ 80 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 12 | 2 ～ 5 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 15 | 2 ～ 5 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 20 | 2 ～ 5 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 6 | 2 ～ 5 | 10 ～ 50 | 3 ～ 4 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 8 | 2 ～ 5 | 10 ～ 50 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 10 | 2 ～ 5 | 20 ～ 80 | 3 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 12 | 2 ～ 5 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 15 | 2 ～ 5 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 20 | 2 ～ 5 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 |
Loading...
Example
Basic Information
| Tip Shape | Tapered | Shape | Support Pin | Mounting Type | Tapped |
|---|---|---|---|---|---|
| Height Tolerance | 0/+0.05 |
Specification/Dimensions
-
Material
- Steel
- Stainless Steel
- Steel
-
Surface Treatment
-
Hardening
- Provided
- Not Provided
-
Hardness
-
Outer Dia. D(mm)
-
B(mm)
-
L(mm)
-
P(mm)
-
type
- SDPAB
- SDPAC
- SDPAR
- SDPASU
- SHPAB
- SHPAC
- SHPAHB
- SHPAHR
- SHPAR
- SHPASU
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 5 Day(s) or Less
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Height Adjusting Pins -Shouldered - Threaded
- Height Adjusting Pins - Height Adjusting Pins
- Small Diameter Height Adjusting Pins - Press Fit
- Small Diameter Height Adjusting Pins - Threaded
- Support Pins - Stepped, Configurable, Straight - Press Fit
- Strut Pin Tip Shape Selectable Type -Female Thread-
- Hex Support Pins - Stepped -Threaded
- Hex Support Pins - Stepped -Tapped
Complementary Products
-
Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded
MISUMI Days to Ship : 6 Day(s) or more
Customers Who Viewed This Item Also Viewed
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy