(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Ejector Sleeves（Boring method：Grinding）
| Days to Ship |
|
|---|
-
Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-
MISUMI
If your product inquiries are out of catalogue, we can support by drawing (Made to order). Please contact [email protected]
Days to Ship: 6 Day(s) or more -
MISUMI
This is a stepped ejector sleeve that is different from the straight type. The wall thickness at the tip can be set to a minimum of 0.3mm, making it thinner than regular products. It has a tapered shape from the sliding part to the escape hole.
Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| D/P (Shaft diameter)(mm) |
| V (Hole diameter)(mm) |
| Material |
| Head thickness |
| Product composition |
| Concentricity between the hole and shaft diameters |
| Shaft diameter tolerance |
| Inner dia. tolerance |
| Surface treatment |
| Boring method |
| Tapered or not |
| Center pin tip shape |
| P (Tip diameter)(mm) |
|
| |
| Brand | MISUMI | MISUMI |
| Product Series | ||
| CAD |
|
|
| Days to Ship | 6 Day(s) or more | 6 Day(s) or more |
| D/P (Shaft diameter)(mm) | 3.2 ～ 14 | 3 ～ 8 |
| V (Hole diameter)(mm) | 0.8 ～ 12.2 | 1 ～ 6 |
| Material | SKH51 | SKH51 |
| Head thickness | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 4mm(T4) |
| Product composition | Single sleeve | Single sleeve |
| Concentricity between the hole and shaft diameters | ◎0.005 | ◎0.005 |
| Shaft diameter tolerance | 0/-0.005 | 0/-0.005 |
| Inner dia. tolerance | +0.005/0 / +0.01/0 | +0.005/0 |
| Surface treatment | No | No |
| Boring method | Grinding | Grinding |
| Tapered or not | No | Yes |
| Center pin tip shape | No | No |
| P (Tip diameter)(mm) | - | 2.5 ～ 8 |
Loading...
Configure
Specification/Dimensions
-
D/P (Shaft diameter)(mm)
-
V (Hole diameter)(mm)
-
Material
- SKH51
- SKD61
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
Product composition
- Single sleeve
-
Concentricity between the hole and shaft diameters
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
- -0.01/-0.03
-
Inner dia. tolerance
-
Surface treatment
- No
- Nitrided
-
Boring method
- Grinding
- Wire cutting & polishing
- Reaming
-
Tapered or not
- Yes
- No
-
Center pin tip shape
-
P (Tip diameter)(mm)
[2.5-8/0.01mm Unit(s)]
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Ejector Sleeves
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy