(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Self Tapping Screws, Taptite High Tech Screws（Tip Shape：Flat End）
In addition to the normal shape, we offer flanged products and those with built-in washers.
[What is a tapping screw?]
It is a screw to be tightened while threading itself against the pilot hole to be tightened. It eliminates the need for tapping, which leads to reduced work costs.
As screws themselves perform threading, the fastening force is high and it does not easily get loosened, but it also has the disadvantage of being difficult to remove.
Types 1, 2 and 3 are available, which are used according to the materials to be tightened.
Detailed Shape
-
Standard -
Extra Low Head -
Ultra Low Head -
Pan Head -
Flat Head -
Truss -
Round Flat Head -
Low Flat Head -
Binding Head -
Button Head Cap
-
SUNCO
Has screws that tighten while tapping in locations where there are open pilot holes, eliminating the need for tapping work. Screws do not rattle, so there is no loosening.
- Volume Discount
Standard Price: MYR 0.40- Days to Ship: 5 Day(s) or more -
SUNCO
The first 2 to 2.5 threads at the tip are taper, and it features a finer pitch than Type 1.
- Volume Discount
Standard Price: MYR 0.24- Days to Ship: 1 Day(s) or more -
Stainless Steel SUS410 Sun Lock Bind
SUNCO
[Nominal M] 3, 4
[Material] SUS410
[Surface Processing] Bare- Volume Discount
Standard Price: MYR 0.63- Days to Ship: 5 Day(s) or more -
(+) Slim Head, B0 Tapping【500-2,000 Pieces Per Package】
SUNCO
[Nominal] 3, 4
[Material] Steel, Stainless Steel
[Surface Processing] Unichrome Plating, Bare- Volume Discount
Standard Price: MYR 202.29- Days to Ship: 5 Day(s) or more -
SUNCO
Tapered down to the top 2-2.5 threads, providing a finer pitch than type 1.
- Volume Discount
Standard Price: MYR 0.35- Days to Ship: 5 Day(s) or more -
Cross Recessed Flat Head Tapping Screws, 2 Models Grooved B-1 Shape【2,000 Pieces Per Package】
SUNCO
The tip is cut by 1/4, with the cut portion acting like a blade to trim the target material.
- Volume Discount
Standard Price: MYR 917.41 Days to Ship: 5 Day(s) or more -
Tamper-Proof Screw Pin/Pan 6 Lobe Tapping B Type
SAIMA
[Features]
· A pin protrudes in the center of the star-shaped hole and a normal 6-lobe wrench cannot be inserted.
· Torque transmission is so good that no come-out occurs and workability is high.
· Ball-like shape screw ideal for female screw machining, and can be screwed in with low torque.- Volume Discount
Standard Price: MYR 1.39- Days to Ship: 7 Day(s) or more -
Tap-Tight P Type Pan【1-20,000 Pieces Per Package】
SUNCO
· Materials: Steel, Stainless steel (SUS410)
· Surface treatment: None, non-chrome, non-chrome (zinc plating) chromate color, non-chrome (zinc plating) black, non-chrome black, trivalent chromate non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, black chromate, nickel plating, nickel plating, black nickel, chrome plating, stainless steel coating, stainless steel coating, trivalent stainless steel coating, CU plating, black paint- Volume Discount
Standard Price: MYR 0.55- Days to Ship: 2 Day(s) or more -
Tap-Tight C Type Truss【1,500-2,000 Pieces Per Package】
SUNCO
[Thread ridge type] Tap-Tight
[Nominal Thread (M)] 4
[Detailed shape] Truss
[Mounting hole dimensions] Phillips
[Basic shape] Standard (Round)
[Materials] Steel
[Tip shape] Flat End
[Sales unit] Box/package
[Length L (mm)] 8 10
[Surface treatment] Non-chrome non-chrome (zinc plating) chromate
[Color]Non-chrome (zinc plating) black
[Color]Non-chrome black
[Color] Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Chrome plating- Volume Discount
Standard Price: MYR 206.32- Days to Ship: 5 Day(s) or more -
Phillips Flat Head Diamond Screw【600-3,000 Pieces Per Package】
SUNCO
[Thread ridge type] Self Tapping Screws
[Detailed shape] Disc
[Mounting hole dimensions] Phillips
[Basic shape] Standard (Round)
[Materials] Steel
[Tip shape] Flat End
[Nominal Thread (M)] 3 4 5 6
[Length L (mm)] 8 10 12 16 20 25 30
[Surface treatment] Trivalent white, Chromate plating
[Sales unit] Low Quantity (Available for Purchase from 1pc) Box and Pkg.- Volume Discount
Standard Price: MYR 294.72- Days to Ship: 5 Day(s) or more -
Phillips Truss Head Diamond Screw【1,000-2,000 Pieces Per Package】
SUNCO
[Thread ridge type] Self Tapping Screws
[Detailed shape] Truss
[Mounting hole dimensions] Phillips
[Basic shape] Standard (Round)
[Materials] Steel
[Tip shape] Flat End
[Sales unit] Box/package
[Nominal Thread (M)] 4 5
[Length L (mm)] 8 10 12
[Surface treatment] Trivalent white, Chromate plating- Volume Discount
Standard Price: MYR 305.73- Days to Ship: 5 Day(s) or more -
PT Screw (1411-H2) with Phillips Head【1,000 Pieces Per Package】
SUNCO
· Thread ridge type: Tap-tight
· Detailed shape: Pan
· Mounting hole dimensions: Phillips
· Basic shape: Standard (round)
· Material: Steel
· Tip shape: Flat end
· Additional shapes: With a flange
· Sales unit: Box/package
· Thread: M3, M4, M5
· Length (mm): 6, 8, 10, 12, 14, 16, 18, 20, 25
· Surface treatment: Trivalent chromate, trivalent black, trivalent white, bright chromate plating, black chromate, nickel plating- Volume Discount
Standard Price: MYR 266.11- Days to Ship: 5 Day(s) or more -
Tap-Tight, B Type, No. 0, Type 2, Pan-Head【5,000-10,000 Pieces Per Package】
SUNCO
[Thread ridge type] TAPTITE
[Detailed shape] Pan Head
[Mounting hole shape] Cross recessed head
[Basic shape] Standard (round)
[Materials] Steel
[Tip shape] Flat point
[Sales unit] Box/package
[Nominal thread designation (M)] 1.4 1.6 1.7 2
[Length L (mm)] 2 2.5 3 3.5 4 4.5 5 6 8 10
[Surface treatment] Trivalent black, Nickel plating, Chrome plating.- Volume Discount
Standard Price: MYR 280.95- Days to Ship: 5 Day(s) or more -
TP Tapping Screw (Class 2 Type B-O Without Groove)【1,000-12,000 Pieces Per Package】
SUNCO
[Thread ridge type] Self-tapping Screws
[Detailed shape] Pan
[Mounting hole dimensions] Phillips
[Basic shape] Standard (Round)
[Materials] Steel
[Tip shape] Flat End
[Additional shapes] With a flange
[Sales unit] Box/package
[Application] Standard
[Nominal Thread (M)] 2 2.3 2.6 3 4 5
[Length L (mm)] 5 6 8 10 12 14 16 18 20 25
[Surface treatment] None, Trivalent chromate, Trivalent black, Trivalent white, Chromate plating, Black chromate- Volume Discount
Standard Price: MYR 215.31- Days to Ship: 5 Day(s) or more -
SUNCO Tap-Tight Screw, Flat Head【2,500-8,000 Pieces Per Package】
SUNCO
[Nominal M] 2/2.5/2.6
[Material] Steel / Stainless steel
[Surface treatment] Trivalent white / Trivalent black / Nickel plating / Black nickel / Chrome plating / Brass plating / Black paint- Volume Discount
Standard Price: MYR 655.91- Days to Ship: 5 Day(s) or more -
TAPTITE P-TITE Pan Head【1,000 Pieces Per Package】
NITTO_SEIKO
Supports cost reduction, pan head Taptite suitable for fastening to plastic
Standard Price: MYR 81.81- Days to Ship: 5 Day(s) or more -
Cross Recessed Binding Head Tapping Screws, 2 Models Grooved B-1 Shape【1-8,000 Pieces Per Package】
SUNCO
The tip is cut by 1/4, with the cut portion acting like a blade to trim the target material.
- Volume Discount
Standard Price: MYR 0.37- Days to Ship: 5 Day(s) or more -
Plax (Bind)【2,000-3,000 Pieces Per Package】
CROWN SCREW
The outer diameter of the highly intermittent thread is slightly greater than the diameter of standard screw areas and the contact surface area is decreased due to the thread being so low, thus preventing synthetic resin degradation caused by friction and preventing damage to male screws.
Standard Price: MYR 226.56- Days to Ship: 5 Day(s) or more -
Cross Recessed Small Head Truss Tapping Screw, Type 2 B-0 Shape【1-1,000 Pieces Per Package】
SUNCO
Tapered down to the top 2.5 to 3 threads, providing a finer pitch than type 1.
- Volume Discount
Standard Price: MYR 0.54- Days to Ship: 5 Day(s) or more -
Thin, Ultra-Low Head TH Type Tapping Screw with Hexagonal Socket, B=0【3,000 Pieces Per Package】
SUNCO
[Thread ridge type] Self-tapping Screws
[Nominal Thread (M)] 3
[Length L (mm)] 8
[Detailed shape] Ultra low head
[Mounting hole dimensions] Hex Socket
[Basic shape] Standard (Round)
[Materials] Steel
[Surface treatment] Trivalent white
[Tip shape] Flat End
[Additional shapes] Standard
[Sales unit] Box/package
[Application] Standard- Volume Discount
Standard Price: MYR 709.35 Days to Ship: 5 Day(s) or more -
TRX Tamper B Type Pan【2,000-6,000 Pieces Per Package】
SUNCO
[Thread ridge type] Tap-Tight
[Detailed shape] Pan
[Mounting hole dimensions] Hexalobular socket
[Basic shape] Standard (Round)
[Materials] Steel
[Tip shape] Flat End
[Sales unit] Box/package
[Nominal Thread (M)] 3 4
[Length L (mm)] 6 8 10 12 16
[Surface treatment] Non-chrome non-chrome (zinc plating) chromate
[Color]Non-chrome (zinc plating) black
[Color]Non-chrome black
[Color] Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Chrome plating- Volume Discount
Standard Price: MYR 337.14- Days to Ship: 5 Day(s) or more -
Tap-Tight P Type Flat【1-20,000 Pieces Per Package】
SUNCO
[Materials] Steel Stainless steel
[Surface treatment]None, Non-chrome, Non-chrome (zinc plating) chromate color, Non-chrome (zinc plating) black, Non-chrome black, Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Chrome plating, Stainless steel coating, Stainless steel coating, Trivalent stainless steel coating, CU plating, Black paint, Head coating (red)- Volume Discount
Standard Price: MYR 0.55- Days to Ship: 5 Day(s) or more -
Tap-Tight P Type Truss【1-16,000 Pieces Per Package】
SUNCO
[Materials] Steel Stainless steel SUS410 Stainless steel
[Surface treatment]None, Non-chrome, Non-chrome (zinc plating) chromate color, Non-chrome (zinc plating) black, Non-chrome black, Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Nickel plating, Black nickel, Chrome plating, Stainless steel coating, Stainless steel coating, Trivalent stainless steel coating, Black paint, Trivalent + Head coating (white)- Volume Discount
Standard Price: MYR 0.79- Days to Ship: 5 Day(s) or more -
Tap-Tight P Type Binding【1-16,000 Pieces Per Package】
SUNCO
[Materials] Steel Stainless steel
[Surface treatment] None, non-chrome, non-chrome (zinc plating) chromate color, non-chrome (zinc plating) black, non-chrome black, trivalent chromate non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, black chromate, nickel plating, nickel plating, black nickel, chrome plating, stainless steel coating, stainless steel coating, trivalent stainless steel coating, CU plating, black paint- Volume Discount
Standard Price: MYR 0.55- Days to Ship: 5 Day(s) or more -
Tap-Tight P Type Brazier【1,000-14,000 Pieces Per Package】
SUNCO
· Thread ridge type: Self tapping screws
· Detailed shape: Pan
· Mounting hole dimensions: Phillips
· Basic shape: Standard (round)
· Materials: Steel
· Tip shape: Flat end
· Sales unit: Box/package
· Thread: M2, M3, M4
· Length (mm): 6, 8, 10, 12, 14, 16, 18, 20
· Surface treatment: Non-chrome (zinc plating) chromate
· Color: Non-chrome (zinc plating) black
· Color: Non-chrome black
· Color: Trivalent chromate non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, black chromate, nickel plating, chrome plating- Volume Discount
Standard Price: MYR 164.52- Days to Ship: 5 Day(s) or more -
Tap-Tight P Type Pan-Washer Head【1-16,000 Pieces Per Package】
SUNCO
[Materials] Steel Stainless steel
[Surface treatment]None, Non-chrome, Non-chrome (zinc plating) chromate color, Non-chrome (zinc plating) black, Non-chrome black, Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Chrome plating, Stainless steel coating, Stainless steel coating, Trivalent stainless steel coating, Black paint, Head coating (white)- Volume Discount
Standard Price: MYR 0.87- Days to Ship: 5 Day(s) or more -
TRXP Type Pan【1-16,000 Pieces Per Package】
SUNCO
[Materials] Steel Stainless steel
[Surface treatment]None, Non-chrome, Non-chrome (zinc plating) chromate color, Non-chrome (zinc plating) black, Non-chrome black, Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Nickel plating, Black nickel, Chrome plating, Black paint- Volume Discount
Standard Price: MYR 0.57- Days to Ship: 5 Day(s) or more -
TRX Tamper P Type Pan【1-8,000 Pieces Per Package】
SUNCO
[Materials] Steel Stainless steel
[Surface treatment]None, Non-chrome, Non-chrome (zinc plating) chromate color, Non-chrome (zinc plating) black, Non-chrome black, Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Chrome plating- Volume Discount
Standard Price: MYR 0.61- Days to Ship: 5 Day(s) or more -
Tap-Tight C Type Pan【1,500-6,000 Pieces Per Package】
SUNCO
[Thread ridge type] Tap-Tight
[Detailed shape] Pan
[Mounting hole dimensions] Phillips
[Basic shape] Standard (Round)
[Materials] Steel
[Tip shape] Flat End
[Sales unit] Box/package
[Nominal Thread (M)] 3 4
[Length L (mm)] 6 8 10 12 14 16
[Surface treatment] Non-chrome non-chrome (zinc plating) chromate
[Color]Non-chrome (zinc plating) black
[Color]Non-chrome black
[Color] Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Chrome plating- Volume Discount
Standard Price: MYR 221.16- Days to Ship: 5 Day(s) or more -
Tap-Tight C Type Binding【1,500-5,000 Pieces Per Package】
SUNCO
· Thread ridge type: Tap-tight
· Detailed shape: Bind
· Mounting hole dimensions: Phillips
· Basic shape: Standard (round)
· Material: Steel
· Tip shape: Flat end
· Sales unit: Box/package
· Thread: M3, M4
· Length (mm): 6, 8, 10, 12
· Surface treatment: Non-chrome (zinc plating) chromate
· Color: Non-chrome (zinc plating) black
· Color: Non-chrome black
· Color: Trivalent chromate non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, black chromate, nickel plating, chrome plating- Volume Discount
Standard Price: MYR 259.60- Days to Ship: 5 Day(s) or more -
Phillips Pan Head Diamond Screw【300-5,000 Pieces Per Package】
SUNCO
[Thread ridge type] Self Tapping Screws
[Detailed shape] Pan
[Mounting hole dimensions] Phillips
[Basic shape] Standard (Round)
[Materials] Steel
[Tip shape] Flat End
[Sales unit] Box/package
[Nominal Thread (M)] 3 4 5 6
[Length L (mm)] 6 8 10 12 14 16 18 20 25 30
[Surface treatment] Trivalent white, Chromate plating- Volume Discount
Standard Price: MYR 261.84- Days to Ship: 5 Day(s) or more -
Phillips Small Flat Head Diamond Screw (D = 6)【800-5,000 Pieces Per Package】
SUNCO
[Thread ridge type] Self Tapping Screws
[Nominal Thread (M)] 4
[Detailed shape] Disc
[Mounting hole dimensions] Phillips
[Basic shape] Standard (Round)
[Materials] Steel
[Tip shape] Flat End
[Sales unit] Box/package
[Length L (mm)] 8 10 12 16 20 25 30 35
[Surface treatment] Trivalent white, Chromate plating- Volume Discount
Standard Price: MYR 313.82- Days to Ship: 9 Day(s) or more -
Flat Head Hex Diamond Screw【600 Pieces Per Package】
SUNCO
[Thread ridge type] Self Tapping Screws
[Detailed shape] Standard
[Mounting hole dimensions] None
[Basic shape] Hex
[Materials] Steel
[Tip shape] Flat End
[Sales unit] Box/package
[Nominal Thread (M)] 4 5 6
[Length L (mm)] 8 10 12 16 20 30
[Surface treatment] Trivalent white, Chromate plating- Volume Discount
Standard Price: MYR 387.09- Days to Ship: 9 Day(s) or more -
SUNLOCK Pan【1-1,000 Pieces Per Package】
MARUEMU WORKS
SUNLOCK is an ideal screw that offers strong tapping with small torque. The cross section of the SUNLOCK screw is non-circular with its three vertices shifting spirally. These two shape features enable smooth screwing with little torque. The female thread is formed with plastic processing, so there are no shavings produced from cutting. In addition, there is a loosening effect because the gap between the male screw and the internal screw is eliminated by the spring-back effect after molding. Plastic processing during formation creates strong female threads and high retention.
- Volume Discount
Standard Price: MYR 0.70- Days to Ship: 5 Day(s) or more -
MARUEMU WORKS
SUNLOCK is an ideal screw that offers strong "tapping" with "small torque." The cross section of the SUNLOCK screw is non-circular with its three vertices shifting spirally. These two features in shape enable smooth screwing with little torque. The female thread is formed with plastic processing, so there are no shavings from cutting. In addition, there is a loosening effect because the gap between the male screw and the internal screw is eliminated by the spring-back effect after molding. Plastic processing during formation creates strong female threads and high retention.
- Volume Discount
Standard Price: MYR 0.77- Days to Ship: 5 Day(s) or more -
SUNLOCK Truss【1-1,000 Pieces Per Package】
MARUEMU WORKS
SUNLOCK is an ideal screw that offers strong "tapping" with "small torque." The cross section of the SUNLOCK screw is non-circular with its three vertices shifting spirally. These two features in its shape make it possible to be screwed in smoothly with small torque. The female thread is formed with plastic processing, so there are no shavings from cutting. In addition, there is a loosening effect because the gap between the male screw and the internal screw is eliminated by the spring-back effect after molding. Plastic processing during formation creates strong female threads and high retention.
- Volume Discount
Standard Price: MYR 0.80- Days to Ship: 5 Day(s) or more -
SUNLOCK Small Flat Head (D=6), (D=8)【1-1,000 Pieces Per Package】
MARUEMU WORKS
SUNLOCK is an ideal screw that offers strong "tapping" with "small torque." The cross section of the SUNLOCK screw is non-circular with its three vertices shifting spirally. These two features in shape enable smooth screwing with little torque. The female thread is formed with plastic processing, so there are no shavings from cutting. In addition, there is a loosening effect because the gap between the male screw and the internal screw is eliminated by the spring-back effect after molding. Plastic processing during formation creates strong female threads and high retention.
- Volume Discount
Standard Price: MYR 0.89- Days to Ship: 5 Day(s) or more -
SUNLOCK Truss Small Head (D=8)
MARUEMU WORKS
SUNLOCK is an ideal screw that offers strong "tapping" with "small torque." The cross section of the SUNLOCK screw is non-circular with its three vertices shifting spirally. These two features in its shape make it possible to be screwed in smoothly with small torque. The female thread is formed with plastic processing, so there are no shavings from cutting. In addition, there is a loosening effect because the gap between the male screw and the internal screw is eliminated by the spring-back effect after molding. Plastic processing during formation creates strong female threads and high retention.
- Volume Discount
Standard Price: MYR 0.96- Days to Ship: 5 Day(s) or more -
MARUEMU WORKS
SUNLOCK is an ideal screw that offers strong tapping with small torque. The cross section of the SUNLOCK screw is non-circular with its three vertices shifting spirally. These two shape features enable smooth screwing with little torque. The female thread is formed with plastic processing, so there are no shavings produced from cutting. In addition, there is a loosening effect because the gap between the male screw and the internal screw is eliminated by the spring-back effect after molding. Plastic processing during formation creates strong female threads and high retention.
- Volume Discount
Standard Price: MYR 2.69- Days to Ship: 5 Day(s) or more -
Tap-Tight S Type Pan Screw P=2(SW)【800-2,500 Pieces Per Package】
SUNCO
· Thread ridge type: Tap-tight
· Detailed shape: Pan
· Mounting hole dimensions: Phillips
· Basic shape: Standard (round)
· Material: Steel
· Tip shape: Flat end
· Additional shapes: Washer insert
· Sales unit: Box/package
· Thread: M2.6, M3, M4
· Length (mm): 4, 6, 8, 10, 12, 16, 20
· Surface treatment: Non-chrome black
· Color: Trivalent chromate non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, black chromate, nickel plating, chrome plating- Volume Discount
Standard Price: MYR 271.16- Days to Ship: 9 Day(s) or more -
Tap-Tight S Type Pan Screw P=3(SW+JIS Flat W)【400-1,600 Pieces Per Package】
SUNCO
[Thread ridge type] Tap-Tight
[Detailed shape] Pan
[Mounting hole dimensions] Phillips
[Basic shape] Standard (Round)
[Materials] Steel
[Tip shape] Flat End
[Additional shapes] Washer Insert
[Sales unit] Box/package
[Nominal Thread (M)] 3 4 5
[Length L (mm)] 6 8 10 12 16 20
[Surface treatment] Non-chrome black
[Color] Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating, Stainless steel coating, CU plating- Volume Discount
Standard Price: MYR 240.48- Days to Ship: 5 Day(s) or more -
Tap-Tight S Type Pan Screw P=4 (SW+JIS Small Flat W)【900-1,200 Pieces Per Package】
SUNCO
· Thread ridge type: Tap-tight
· Detailed shape: Pan
· Mounting hole dimensions: Phillips
· Basic shape: Standard (round)
· Material: Steel
· Tip shape: Flat end
· Additional shapes: Washer insert
· Sales unit: Box/package
· Thread: M3, M4
· Length (mm): 6, 8, 10, 12
· Surface treatment: Non-chrome black
· Color: Trivalent chromate non-chrome plating white, trivalent black, trivalent white, bright chromate plating, chromate plating, chromate plating, black chromate, nickel plating, german-brown plating- Volume Discount
Standard Price: MYR 293.99- Days to Ship: 5 Day(s) or more -
Phillips Head S Type Pan Screw LO=2【1,500-4,000 Pieces Per Package】
SUNCO
[Thread ridge type] Tap-Tight
[Detailed shape] Pan
[Mounting hole dimensions] Phillips
[Basic shape] Standard (Round)
[Materials] Steel
[Tip shape] Flat End
[Additional shapes] Washer Insert
[Sales unit] Box/package
[Nominal Thread (M)] 3 4
[Length L (mm)] 6 8
[Surface treatment] Trivalent chromate, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating- Volume Discount
Standard Price: MYR 337.14- Days to Ship: 5 Day(s) or more -
Tap-Tight S Type Pan Screw PK=1 (JIS Small Flat W)【800 Pieces Per Package】
SUNCO
[Thread ridge type] Tap-Tight
[Nominal Thread (M)] 4
[Length L (mm)] 20
[Detailed shape] Pan
[Mounting hole dimensions] Phillips
[Basic shape] Standard (Round)
[Materials] Steel
[Tip shape] Flat End
[Additional shapes] Washer Insert
[Sales unit] Box/package
[Surface treatment] Non-chrome black
[Color] Trivalent chromate non-chrome plating white, Trivalent black, Trivalent white, Bright chromate plating, Chromate plating, Chromate plating, Black chromate, Nickel plating- Volume Discount
Standard Price: MYR 280.84 Days to Ship: 9 Day(s) or more -
Tap-Tight S Type Binding Screw P=1 (JIS Flat W)【1,000-2,000 Pieces Per Package】
SUNCO
[Thread ridge type] Tap-Tight
[Nominal Thread (M)] 3
[Detailed shape] Bind
[Mounting hole dimensions] Phillips
[Basic shape] Standard (Round)
[Materials] Steel
[Tip shape] Flat End
[Additional shapes] Washer Insert
[Sales unit] Box/package
[Length L (mm)] 6 8
[Surface treatment] Trivalent white, Chromate plating- Volume Discount
Standard Price: MYR 284.10- Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Detailed Shape |
| Nominal of Thread (M) |
| Thread Type |
| Length L (mm) |
| Drive Type |
| Surface Treatment |
| Tip Shape |
| Basic Shape |
| Material |
| Additional Shape |
| Sales Unit |
| Application |
| Operating Environment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SAIMA | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | NITTO_SEIKO | SUNCO | CROWN SCREW | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | MARUEMU WORKS | MARUEMU WORKS | MARUEMU WORKS | MARUEMU WORKS | MARUEMU WORKS | MARUEMU WORKS | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO |
| Product Series | Cross Recessed Flat Head Tapping Screws, 2 Models Grooved B-1 Shape【2,000 Pieces Per Package】 | Phillips Flat Head Diamond Screw【600-3,000 Pieces Per Package】 | Phillips Truss Head Diamond Screw【1,000-2,000 Pieces Per Package】 | PT Screw (1411-H2) with Phillips Head【1,000 Pieces Per Package】 | Tap-Tight, B Type, No. 0, Type 2, Pan-Head【5,000-10,000 Pieces Per Package】 | TP Tapping Screw (Class 2 Type B-O Without Groove)【1,000-12,000 Pieces Per Package】 | SUNCO Tap-Tight Screw, Flat Head【2,500-8,000 Pieces Per Package】 | Cross Recessed Binding Head Tapping Screws, 2 Models Grooved B-1 Shape【1-8,000 Pieces Per Package】 | Cross Recessed Small Head Truss Tapping Screw, Type 2 B-0 Shape【1-1,000 Pieces Per Package】 | Thin, Ultra-Low Head TH Type Tapping Screw with Hexagonal Socket, B=0【3,000 Pieces Per Package】 | Tap-Tight P Type Pan-Washer Head【1-16,000 Pieces Per Package】 | Phillips Pan Head Diamond Screw【300-5,000 Pieces Per Package】 | Phillips Small Flat Head Diamond Screw (D = 6)【800-5,000 Pieces Per Package】 | SUNLOCK Small Flat Head (D=6), (D=8)【1-1,000 Pieces Per Package】 | Tap-Tight S Type Pan Screw P=2(SW)【800-2,500 Pieces Per Package】 | Tap-Tight S Type Pan Screw P=3(SW+JIS Flat W)【400-1,600 Pieces Per Package】 | Tap-Tight S Type Pan Screw P=4 (SW+JIS Small Flat W)【900-1,200 Pieces Per Package】 | Phillips Head S Type Pan Screw LO=2【1,500-4,000 Pieces Per Package】 | Tap-Tight S Type Pan Screw PK=1 (JIS Small Flat W)【800 Pieces Per Package】 | Tap-Tight S Type Binding Screw P=1 (JIS Flat W)【1,000-2,000 Pieces Per Package】 | |||||||||||||||||||||||||
| CAD |
|
|
| ||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more |
| Detailed Shape | Pan Head | Pan Head | Binding Head | Ultra Low Head | Binding Head | Flat Head | Pan Head | Pan Head | Truss | Flat Head | Truss | Pan Head | Pan Head | Pan Head | Flat Head | Pan Head | Binding Head | Binding Head | Truss | Ultra Low Head | Pan Head | Flat Head | Truss | Binding Head | Pan Head | Pan Head | Pan Head | Pan Head | Pan Head | Binding Head | Pan Head | Flat Head | Standard | Pan Head | Flat Head | Truss | Flat Head | Truss | Standard | Pan Head | Pan Head | Pan Head | Pan Head | Pan Head | Binding Head |
| Nominal of Thread (M) | 2.6 | 2 ～ 6 | 3 ～ 4 | 3 ～ 4 | 2 ～ 6 | 3.5 | 2 ～ 4 | 2 ～ 6 | 4 | 4 ～ 6 | 4 ～ 5 | 3 ～ 5 | 1.4 ～ 2 | 2 ～ 4 | 2.5 ～ 2.6 | 2 ～ 4 | 2 ～ 6 | 3 | 4 | 3 | 3 ～ 4 | 2 ～ 5 | 2 ～ 5 | 2 ～ 5 | 2 ～ 4 | 2 ～ 5 | 2 ～ 3 | 2.6 ～ 4 | 3 ～ 4 | 3 ～ 4 | 3 ～ 6 | 4 | 6 | 3 ～ 6 | 3 ～ 5 | 3 ～ 5 | 4 ～ 5 | 4 | 6 | 2.6 ～ 4 | 3 ～ 5 | 3 ～ 4 | 3 ～ 4 | 4 | 3 |
| Thread Type | Self Tapping | Self Tapping | Taptite | Self Tapping | Self Tapping | Self Tapping | Self Tapping | Taptite | Taptite | Self Tapping | Self Tapping | Taptite | Taptite | Self Tapping | Taptite | Taptite | Self Tapping | Self Tapping | Self Tapping | Self Tapping | Taptite | Taptite | Taptite | Taptite | Self Tapping | Taptite | Taptite | Taptite | Taptite | Taptite | Self Tapping | Self Tapping | Self Tapping | Taptite | Taptite | Taptite | Taptite | Taptite | Taptite | Taptite | Taptite | Taptite | Taptite | Taptite | Taptite |
| Length L (mm) | 8 ～ 18 | 3 ～ 60 | 8 ～ 12 | 8 ～ 16 | 4 ～ 40 | 12 | 4 ～ 12 | 3 ～ 40 | 8 ～ 10 | 8 ～ 30 | 8 ～ 12 | 6 ～ 25 | 3 ～ 8 | 5 ～ 20 | 6 ～ 12 | 6 ～ 12 | 4 ～ 40 | 8 ～ 12 | 8 ～ 16 | 8 | 6 ～ 16 | 4 ～ 35 | 4 ～ 25 | 4 ～ 40 | 6 ～ 20 | 4 ～ 35 | 6 ～ 12 | 6 ～ 20 | 6 ～ 16 | 6 ～ 12 | 8 ～ 30 | 8 ～ 30 | 12 ～ 16 | 6 ～ 50 | 8 ～ 35 | 6 ～ 40 | 6 ～ 60 | 6 ～ 20 | 16 ～ 25 | 4 ～ 20 | 6 ～ 20 | 6 ～ 12 | 6 ～ 8 | 20 | 6 ～ 8 |
| Drive Type | Cross/Straight Slot | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Hexalobular Socket | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Hex Socket | - | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Cross-Head | - | - | Cross-Head | Cross-Head | Cross-Head | Cross-Head | - | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Cross-Head | - | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Cross-Head | Cross-Head |
| Surface Treatment | Not Provided | Copper Plating / Tin Plating / Black Paint / White Paint / Temper Color / Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating | Not Provided | Not Provided / Bright Chrome Plating | Stainless Steel Plating / Copper Plating / Black Paint / Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating | Seizure-Against Coating | - | Black Paint / Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating / Stainless Steel Coating | Trivalent Chromate | Trivalent Chromate / Chromate Plating | Trivalent Chromate / Chromate Plating | Trivalent Chromate / Bright Chrome Plating / Nickel Plating | Trivalent Chromate / Nickel Plating / Chrome Plating | Not Provided / Trivalent Chromate / Chromate Plating | Black Paint / Trivalent Chromate | Trivalent Chromate / Nickel Plating | Copper Plating / Black Paint / Not Provided / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating / Dacrotizing / Stainless Steel Coating | Trivalent Chromate | Copper Plating / Black Paint / Not Provided | Trivalent Chromate | Trivalent Chromate / Chromate Plating / Nickel Plating | Black Paint / Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating | Black Paint / White Paint / Not Provided / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating | Black Paint / Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating / Chrome Plating / Stainless Steel Coating | Trivalent Chromate / Chromate Plating / Nickel Plating | Black Paint / White Paint / Not Provided / Chromium free / Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating | Black Paint / Not Provided / Trivalent Chromate / Nickel Plating | Not Provided / Trivalent Chromate / Chromate Plating / Nickel Plating | Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating | Trivalent Chromate / Chromate Plating / Nickel Plating | Trivalent Chromate / Chromate Plating | Trivalent Chromate / Chromate Plating | Trivalent Chromate / Chromate Plating | Copper Plating / Not Provided | Not Provided | Copper Plating / Black Paint / Not Provided | Not Provided | Not Provided | Not Provided | Trivalent Chromate / Chromate Plating | Trivalent Chromate / Bright Chrome Plating / Chromate Plating / Nickel Plating | Trivalent Chromate / Chromate Plating / Nickel Plating | Trivalent Chromate / Chromate Plating | Chromate Plating | Trivalent Chromate / Chromate Plating |
| Tip Shape | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End | Flat End |
| Basic Shape | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Hex | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Hex | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) | Standard (Round) |
| Material | Stainless Steel | Stainless Steel ～ Titanium | Stainless Steel | Stainless Steel ～ Steel | Stainless Steel ～ Steel | Stainless Steel | Steel | Stainless Steel ～ Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel ～ Steel | Steel | Stainless Steel ～ Steel | Steel | Stainless Steel | Steel | Steel | Stainless Steel ～ Steel | Stainless Steel ～ Steel | Stainless Steel ～ Steel | Steel | Stainless Steel ～ Steel | Stainless Steel ～ Steel | Stainless Steel ～ Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Additional Shape | - | Standard | Standard | Standard | Standard | Standard | Standard | - | - | - | - | Flanged | - | Flanged | Standard | Standard | Standard | Standard | - | Standard | - | - | - | - | - | Flanged | - | - | - | - | - | - | - | - | - | - | - | - | - | With Captured Washer | With Captured Washer | With Captured Washer | With Captured Washer | With Captured Washer | With Captured Washer |
| Sales Unit | Sold Individually (No Min. Purchase) | Sold Individually (No Min. Purchase) / Box, Pkg. | Sold Individually (No Min. Purchase) | Box, Pkg. | Sold Individually (No Min. Purchase) / Box, Pkg. | Box, Pkg. | Sold Individually (No Min. Purchase) | Sold Individually (No Min. Purchase) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Sold Individually (No Min. Purchase) / Box, Pkg. | Box, Pkg. | Sold Individually (No Min. Purchase) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Sold Individually (No Min. Purchase) / Box, Pkg. | Sold Individually (No Min. Purchase) / Box, Pkg. | Sold Individually (No Min. Purchase) / Box, Pkg. | Box, Pkg. | Sold Individually (No Min. Purchase) / Box, Pkg. | Sold Individually (No Min. Purchase) / Box, Pkg. | Sold Individually (No Min. Purchase) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | - | - | - | - | - | - | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. |
| Application | - | Standard | - | Standard | Standard | Standard | Tamper Proof | - | - | - | - | - | - | Standard | - | Standard | Standard | Standard | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operating Environment | - | Normal | - | - | Normal | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Nominal of Thread (M)
-
Thread Type
- Metric, Coarse
- Self Tapping
- Taptite
- High Tech
-
Length L (mm)
-
Drive Type
-
Hex Socket -
Cross-Head -
Not Provided -
Cross/Straight Slot -
Hexalobular Socket -
Two Holes -
Tri-Wing -
One Side
-
-
Surface Treatment
- Not Provided
- Chromium free
- Trivalent Chromate
- Bright Chrome Plating
- Zinc Plating
- Hot Zinc Plating
- Chromate Plating
- Nickel Plating
- Chrome Plating
- Parkerizing
- Dacrotizing
- Barrel, Passivated
- GeoMet Coating
- Stainless Steel Coating
- Stainless Steel Plating
- Seizure-Against Coating
- Copper Plating
- Tin Plating
- Black Paint
- White Paint
- Silver Baked Finish
- Temper Color
- Other Special Treatment
-
Tip Shape
-
Flat End -
Cone Point -
Dog Point -
Rounded End -
Other Special Shapes
-
-
Basic Shape
-
Standard (Round) -
Hex -
Fully Threaded -
Stud Bolt -
Other Screws
-
-
Material
-
Additional Shape
-
Standard -
With Captured Washer -
Flanged
-
-
Sales Unit
- Sold Individually (No Min. Purchase)
- Box, Pkg.
-
Application
-
Operating Environment
- Normal
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- SUNCO (78)
- MARUEMU WORKS (6)
- NITTO_SEIKO (4)
- CROWN SCREW (1)
- SAIMA (1)
- TRUSCO NAKAYAMA (0)
- YAHATA (0)
- MARVEL (0)
- ESCO (0)
- YAMASHINA (0)
- FASLINK (0)
- OSP (0)
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
Related Categories to Self Tapping Screws, Taptite High Tech Screws
-
- Cross Recessed Bolts
- Micro Screws, Pan Head Machine Screws for Precision Instruments
- Screws with Captured Washer
- Self Tapping Screws, Taptite High Tech Screws
- Self-Drill Screws
- Tamper Proof Button Head Cap Screws
- Hex Screws
- Hex Socket Head Cap Screws
- Space Saving Bolts
- Small Screws
- Screws with Through Hole
- Hex Socket Button Head Cap Screws
- Hex Socket Flat Head Cap Screws
- Unified screw, Inch screw
- Hex Socket Set Screws
- Fully Threaded, Stud Bolts
- Knurled Wing Screws
- Square bolts
- Plastic Screws
- Cover Screws
- Strippers, Reamer Bolts
- I-Bolts, U-Bolts for Plumbing
- U-Bolts
- Fastening Related Components
- Bolt
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy