(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Transparent Plastic Plates, Plastic Cover Panels（Material：Polycarbonate (PC)）
| Days to Ship |
|
|---|
-
Polycarbonate Plates -High Impact Resistance
MISUMI
[Standard large quantity available] 15% discount for 21 to 100 pieces, no estimate required.
Days to Ship: 10 Day(s) or more -
Polycarbonate Plate -Transparent -High Strength & Heat Resistant
TAKIRON
Achieves superior impact strength and glass transparency. Note: Quoted from the 2013 Takiron comprehensive catalog.
[Features]
· Polycarbonate plates are made from materials with superior impact resistance, even among plastics.
· Plastic with a transparency equal to glass that refutes the common belief that transparent materials are easy to break.
· Possesses the highest level of impact-resistance strength while using transparent materials with approximately 20 times the strength of hard vinyl chloride and approximately 40 times the strength of acrylic.
· Superior light permeability rate of 85% for 5 mm transparent plate, the same transparency as high grade plate glass.
· Low thermal conductivity (1/5th of glass) and superior heat retention qualities. Useful for insulation.
· Can be used in a wide range of temperatures, from -40°C to +120°C.
· 1 mm thickness and resistant to high voltages of up to 30,000 volts. More than twice the insulating value as Bakelite. Optimal as electric insulation material.
· Weather-resistant grade that prevents yellowing and is barely affected by direct sunlight, wind, rain, temperatures, etc., when compared to other plastic materials. Quality can be selected based on application.
[Polycarbonate Processing Features]
1. Little change in load (creep) and easy drilling and cutting.
2. Vacuum forming and heat bending possible.
3. Cold forming by bending into a curve under temperatures below room temperature is possible.
· Food and Hygiene Law / UL certified product / Railway car compliance certified product.Days to Ship: 6 Day(s) or more -
Plastic Sheets -Thin Type -0.5 to 2.0 mm
MISUMI
· Thin plates from 0.5 to 2.0 mm can be specified in increments of 1 mm.
Days to Ship: 6 Day(s) or more -
Extra Thin Plastic Sheets -Polyacetal / Fluororesin / Polycarbonate
MISUMI
Thin Type Plastic Sheets with 0.1~1.0 thickness. Polyacetal, Fluororesin or Polycarbonate can be selected as the product material.
Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Material |
| Environmentally Friendly |
| Color |
| Grade |
| Hole Machining |
| Continuous Operating Temperature (High Temperature)(℃) |
| Continuous Operating Temperature (Low Temperature)(℃) |
| Volume Resistivity Value(Ω･cm) |
| Flame Retardancy |
| Oil |
| Acid |
| Alkali |
| A/B Dimension Tolerance |
| Number of Holes on A Side |
| Number of Holes on B Side |
| Shape |
|
|
|
| |
| Brand | MISUMI | TAKIRON | MISUMI | MISUMI |
| Product Series | Polycarbonate Plate -Transparent -High Strength & Heat Resistant | Extra Thin Plastic Sheets -Polyacetal / Fluororesin / Polycarbonate | ||
| CAD |
|
|
| |
| Days to Ship | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Material | Polycarbonate (PC) | Polycarbonate (PC) | Polycarbonate (PC) | Polycarbonate (PC) |
| Environmentally Friendly | - | - | - | - |
| Color | Smoke Brown ～ Transparent | Transparent | Transparent | Transparent |
| Grade | Standard / Antistatic / Abrasion Resistant | Standard | Standard | Standard |
| Hole Machining | 2 Holes, Horizontal ～ No Drilling Alteration | No Drilling Alteration | 2 Holes, Horizontal ～ No Drilling Alteration | No Drilling Alteration |
| Continuous Operating Temperature (High Temperature)(℃) | 80 to 100 | - | - | - |
| Continuous Operating Temperature (Low Temperature)(℃) | -30 | - | - | - |
| Volume Resistivity Value(Ω･cm) | ＞10^17 | - | - | - |
| Flame Retardancy | - | - | - | - |
| Oil | ○ / × | - | - | - |
| Acid | - | - | - | - |
| Alkali | - | - | - | - |
| A/B Dimension Tolerance | ±1.0 | - | - | - |
| Number of Holes on A Side | - | - | - | - |
| Number of Holes on B Side | - | - | - | - |
| Shape | No Hole Machining (Standard Type) / Number of Holes Selection Type (With 2H to 8H Holes) | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Material
- PET
- Acrylic
- Polyacetal
- Polycarbonate (PC)
- Vinyl Chloride (PVC)
- Ultra High-Molecular-weight-Polyethylene
- Fluorine
-
Environmentally Friendly
-
Color
-
Grade
- Standard
- Antistatic
- Abrasion Resistant
-
Hole Machining
-
Continuous Operating Temperature (High Temperature)(℃)
-
Continuous Operating Temperature (Low Temperature)(℃)
- -15
- -30
-
Volume Resistivity Value(Ω･cm)
- ＞10^11
- ＞10^15
- ＞10^17
-
Flame Retardancy
- Equivalent to V-0
-
Oil
- ○
- ×
-
Acid
- ○
- ×～△
-
Alkali
- ○
-
A/B Dimension Tolerance
- ±1.0
- -0.2 to 0
- ±0.1
- 0 to +0.2
-
Number of Holes on A Side
- 2
- 3
- 4
-
Number of Holes on B Side
- 2
- 3
- 4
-
Shape
- No Hole Machining (Standard Type)
- Number of Holes Combination Type (With Corner Holes)
- Number of Holes Combination Type (Without Corner Holes)
- Number of Holes Selection Type (With 2H to 8H Holes)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Transparent Plastic Plates, Plastic Cover Panels
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy