(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Adjuster Bolt（Thread Surface Treatment：Trivalent Chromate）
| Days to Ship |
|
|---|
-
MISUMI
- Leveling Mount/Standard type.
- Part number for series including of NFJN, NFJNS and NFJNF type.
- Type of product : Adjusting Bolt.
- Body Material: SS400 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Trivalent Chromate (SS400) and Electrolytic Polishing (SUS304)
- Nominal of Thread size (M): 5, 6, 8, 10, 12, 16 and 20.
- Thread Length size: 30, 40, 50, 60, 75, 80, 100, 125, 130, 150, 180, 200, 250 and 300 mm.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.- Volume Discount
Days to Ship: 1 Day(s) or more -
MISUMI
- Leveling Mount/Heavy Load
- Product Type: Adjusting Bolt.
- Part number for series including of FJFN, FJFNS, FJFNB, FJFNF and FJFNH.
- Body Material: SS400 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Trivalent Chromate solution for SS400 Steel.
- Nominal of Thread size (M): 10, 12, 16, 20 and 24.
- Thread Length size75, 100, 125, 130, 150 and 180 mm.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.
- The Leveling Mounts: RoHS compliant.- Volume Discount
Days to Ship: 1 Day(s) or more -
Leveling Mounts - Pivot Short Type
MISUMI
- Leveling Mounts - Pivot Short Type.
- The part number is FJRP.
- Foot Base Material: Stainless Steel (SUS304)
- Thread Material: Carbon Steel
- Thread Surface Treatment: Trivalent Chromate solution
- The Bottom Pad Material: Polyamide.
- Nominal of Thread size (M): 6, 8, 10, and 12.
- Leveling Mounts Thread Length size: 14, 19, 20 and 25 mm.
- For Leveling Mounts type: RoHS compliant.
- Suitable for use for floor surface is curved and in condition of the leg has an angle.- Volume Discount
Standard Price: MYR 11.56- Days to Ship: 2 Day(s) or more -
MISUMI
- Adjustment Pads/Two Hole Type.
- Part number for series including of FJWN and FJWNS.
- Body Material: SS400 steel and stainless steel SUS304.
- Surface Treatment: Trivalent Chromate solution and Electrolytic Polishing.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 75, 100, 125, 130, 150 and 180 mm.
- This series designed two holes are machined for drive-in anchors.
- Screw shaft turns independently of the base and tilts slightly.
- For Adjustment Pads type: RoHS compliant.- Volume Discount
Standard Price: MYR 31.52- Days to Ship: 4 Day(s) or more -
MISUMI
- Adjuster Feet/Resin Rubber Type
- Product type: Adjusting Bolt.
- Part number for series including of LEMNS(Steel) and LEMNT (Stainless steel).
- Body, Thread, and nut Material: S45C steel and stainless steel SUS304.
- Body, Thread and Surface Treatment: Trivalent Chromate solution for S45C steel.
- Nominal of Thread size (M): 10, 12 and 16.
- Thread Length size: 75, 100 and 130 mm.
- Tiltable in all 360° directions.
- The screw shaft is tilted to allow use on angled floor surfaces.- Volume Discount
Standard Price: MYR 50.13- Days to Ship: 4 Day(s) or more -
MISUMI
- Leveling Mount Non- Slip Type
- Part number for series including of is FJGN, FJGM, FJGNS and FJGMS.
- Body Material: SS400 Steel and SUS304 Stainless steel.
- Body Surface Treatment: Trivalent Chromate and Electrolytic Polishing.
- Rubber Material: Elastomer, Neoprene, Non-Migration Chloroprene Rubber, Electrically Conductive Rubber, PVC (Dark Blue).
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 50, 75, 100, 125, 130, 150 and 180 mm.
- Screw shaft turns independently of the base and tilts slightly.- Volume Discount
Standard Price: MYR 11.38- Days to Ship: 1 Day(s) or more -
MISUMI
- Adjustment Pads/Fixed Type
- Product type: Adjusting Bolt.
- Part number for series including of FJKN (Steel) and FJKNS (Stainless steel).
- Body Material: SS400 steel and stainless steel SUS304.
- Surface Treatment: Trivalent Chromate solution for SS400 steel.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 75, 100, 125, 130 150 and 180 mm.
- Screw shaft turns independently of the base and tilts slightly.
- This Adjustment Pad type has one hole is machined for drive-in.- Volume Discount
Standard Price: MYR 16.51- Days to Ship: 1 Day(s) or more -
NABEYA BI-TECH
- FCM/FCF series Leveling adjuster with plastic pad.
- Part number for series including of FCM, FCM-G, FCF and FCF-G type.
- Threaded Material: Steel SUM22L.
- Thread Surface Treatment: Trivalent Chromate solution.
- Lock nut: S45C, trivalent chromate treatment
- Body Pad Material: Glass fiber reinforced nylon6 (Black color)
- The pad tilts up to 15°. Effective for use on slopes.
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 40, 50, 63, 80, 100 and 125 mm.- Volume Discount
Standard Price: MYR 29.22- Days to Ship: 5 Day(s) or more -
MISUMI
- Tabletop Leveling Mounts
- Product type: Mounting.
- The part number is NFB.
- Main Body Material: PP Resin plastic.
- Tabletop Leveling Mounts Thread Material is SS400 Carbon steel.
- Thread Surface Treatment: Trivalent Chromate solution.
- Nominal of Thread size (M): 5, 6, 8 and 10
- Tabletop Leveling Mounts Body Color: Black.
- Screws and pads are integrated, and Hex nut included.
- For Leveling Mounts type: RoHS10 compliant.
- Pads intended to fix lightweighted equipment, such as desktop type inspection tools.- Volume Discount
Standard Price: MYR 7.27- Days to Ship: 1 Day(s) or more -
Adjuster For Light Anti-Vibration Use With Rubber Base, D/RCR/REP/RSI Series
DAIWARASHI
This adjuster has a rubber base and is the most popular adjuster.
[Features]
· Since the rubber part is in contact with the floor, it will not damage the floor.
· This is an adjustment bolt of the light anti-vibration type.
· There is a + arrow on the bottom of the bolt, so it can be easily installed with a screwdriver.
· A nylon washer is used between the saucer and the bolt for smooth rotation.
· The FR type uses non-migrating rubber, so even if the machine is moved, no trace of the rubber remains.
· SI type is white and does not leave traces of rubber.
· Suitable for office equipment, etc.- Volume Discount
Standard Price: MYR 22.12- Days to Ship: 13 Day(s) or more -
Adjuster for Heavy Weights D-C/D-C, S
DAIWARASHI
A standard type adjuster for heavy loads
[Features]
· The receiver is a forged item.
· Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
· D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
· Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 30.23- Days to Ship: 4 Day(s) or more -
Adjuster Feet/Resin Rubber Type
MISUMI
- Adjuster Feet/Resin Rubber Type
- Part number for series including of AJPD, AJPDS, AJPDR and AJPDSR.
- Body Material: SS400 steel and stainless steel SUS304.
- Surface Treatment: Trivalent Chromate solution for SS400 steel.
- Bottom Material: Reinforced Polyacetal for Pad Bottom and NBR for Rubber Pad.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 60, 70, 80, 100, 130, 150 and 180 mm.
- Tiltable in all 360° directions.
- Use of the Rubber Pad Type in full ground contact will be less slippery.- Volume Discount
Standard Price: MYR 52.13- Days to Ship: 4 Day(s) or more -
Leveling Foot (heavy load/ultra-heavy load type), FPM
NABEYA BI-TECH
Heavy load / super heavy load type leveling foot. The screw is made of steel. Outstanding durability.
[Features]
· Ideal for the leveling of transfer lines, etc.
· The pad can be tilted up to 15°.
· Effective for use on slopes.
· Thread diameters from M10 to M24 are available as standard.
· FPM-G and FPM-GH come with a rubber disk for slip prevention.
· FPM and FPM-G are heavy load types.
· FPM-H and FPM-GH are super heavy load types.
· Products with a pad diameter equal to or greater than ø80 have two hidden holes for anchor bolts and two guide holes for hole drilling.- Volume Discount
Standard Price: MYR 66.45- Days to Ship: 5 Day(s) or more -
NABEYA BI-TECH
[Features]
· A leveling foot in which the screw and pad are made of steel.
· FDM: male thread and FDF: female thread.
· The pad can be tilted up to 15°.
· Effective for use on slopes.
· There are products that include a Delrin* cap (FDM-KS/EDE-KS) and products that include a Santoprene** cap (FDM-KR/FDF-KR).
· Material and finish: Screw/pad: SUS22L, trivalent chromate finish.
· Lock nut: S45C, trivalent chromate finish- Volume Discount
Standard Price: MYR 81.87- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 46.75- Days to Ship: 4 Day(s) or more -
Tabletop Leveling Mounts/Grip Type
MISUMI
- Tabletop Leveling Mounts/Grip Type
- Product type: Mounting.
- The part number is NFBG.
- Main Body Material: Polyacetal plastic.
- Bottom Material: Elastomer rubber.
- Thread Material is SWCH steel.
- Thread Surface Treatment: Trivalent Chromate solution.
- Nominal of Thread size (M): 6, 8 and 10 (Coarse).
- Grip Body Color: Black and white.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.
- The product with a leveling function. Less slippery than the existing products.- Volume Discount
Standard Price: MYR 16.44- Days to Ship: 1 Day(s) or more -
Adjuster for Heavy Loads with Rubber (Bearing Equipped), D-H-R/HTR Series
DAIWARASHI
An adjuster equipped with rubber for medium loads featuring a built-in thrust bearing.
[Features]
· Since the receiver features a chloroprene rubber coating, there is no need to worry about it falling off, enabling it to be used with confidence.
· Groove processing is applied to the rear surface of the rubber to make it non-slippery.
· Effectively protects floors.- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 231.56- Days to Ship: 2 Day(s) or more -
Adjuster for Standard Applications D-A/D-B/N series
DAIWARASHI
This is one of the most popular adjusters.
[Applications]
· Standard type suitable for use as an adjustment bolt for all kinds of machines
· For applications such as conveyor legs where large quantities are used, the economical standard catch plate type is recommended- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 18.16- Days to Ship: 4 Day(s) or more -
Adjuster Feet/Tapped Socket Type
MISUMI
- Adjuster Feet/Tapped Socket Type.
- Part number for series including of LEMN, LEMS and LEMT type.
- Type of product : Adjusting Bolt.
- Body Material: Nylon Plastic, Carbon Steel and SUS303 Stainless steel.
- Socket Material: SUM24, SUM23 and SUS303.
- Socket Surface Treatment: Trivalent Chromate and electroless Nickel Plating.
- Nominal of Thread size (M): 6, 8, 10, 12 and 16.
- Thread Length size: 40, 50, 63, 80, 100 and 125 mm.
- This product can be used as a strike plate to fix the adjustment bolt.- Volume Discount
Standard Price: MYR 25.46- Days to Ship: 2 Day(s) or more -
Tabletop base Separated type, Knurled type
MISUMI
- Tabletop Leveling Mounts -Separate Type / Knurled Type
- Part number for series including of KFB (Separate Type) and KFBR (Knurled Type).
- Product type: Mounting.
- Tabletop Leveling Mounts Main Body Material: ABS Resin and Polyamide.
- Bottom Material: Polyurethane (For use with Polyamide body type)
- Bolt Material: SWRM Steel and Trivalent Chromate plating solution.
- Nominal of Thread size (M): 8, 10 and 12.
- Separable threads and pad are convenient for disposal.
- The Tabletop Leveling Mounts: RoHS compliant.- Volume Discount
Standard Price: MYR 11.55- Days to Ship: 4 Day(s) or more -
Leveling Mounts - Space Saving - Pivot Type
MISUMI
- Leveling Mounts - Space Saving - Pivot Type
- The part number is HNFJR.
- Body Material: SS400 Carbon Steel.
- Body Surface Treatment: Trivalent Chromate solution.
- Nominal of Thread size (M): 8 and 12.
- Thread Length size: 20, 30, 50, 80 and 100 mm.
- HNFJR type the screw section can move Swivel Angle through 30°.
- Carbon steel is chromate plated for bright appearance and better corrosion resistance.
- Pivot Type are used for various applications where it is necessary to level and stabilize equipment or machinery.- Volume Discount
Standard Price: MYR 54.46- Days to Ship: 4 Day(s) or more -
Adjuster for Heavy Loads With Rubber, D-C-R/HCR Series
DAIWARASHI
Adjuster for heavy loads with a rubber pedestal.
[Features]
·Chloroprene rubber is baked on the saucer
· For heavy equipment, light anti-vibration type
· Reduces the transmission of machine vibrations to the floor
[Applications]
·It does not damage the floor surface, so please use it even on high-grade flooring.
·By baking the rubber on the surface, it stands out even more from an aesthetic perspective and also has an anti-slip effect- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 42.63- Days to Ship: 4 Day(s) or more -
Adjuster for Heavy Loads (Catch Plate Wide Type) D-CIII-W/HW2 Series
DAIWARASHI
This adjuster features a large base (⌀100) with a wide contact surface for the floor.
[Features]
· The catch plate is a forged product.
· The surface of the catch plate is finished with grinding processing using a lathe, giving it a sense of luxury.- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 60.16- Days to Ship: 2 Day(s) or more -
Adjuster Pad - Rotary Type, Nylon Pad Bottom
MISUMI
[Features]·The screw shaft is tilted to allow use on angled floor surfaces.
- Volume Discount
Standard Price: MYR 35.15- Days to Ship: 4 Day(s) or more -
WAKISANGYO
[Features]
· Ultra-durable and can be used for desks, furniture, and much more.
[Applications]
Used to adjust and stabilize wobbly desks and chairsStandard Price: MYR 9.18- Days to Ship: 8 Day(s) -
Foot Jack FJC Type (Heavy Load Type)
NABEYA
A type of casting base that can support heavy loads.
[Features]
· A Phillips head slot has been provided on the base bottom and assembly can be performed using a screwdriver, etc.- Volume Discount
Standard Price: MYR 38.99- Days to Ship: 4 Day(s) or more -
Adjuster for Fixing Anchor, D-EII/D-EII-ST/A/AST series
DAIWARASHI
Adjuster for fixing anchor that is one of the most commonly used adjusters.
[Features]
· Similar to D-A, it is structured so that the catch plate and bolt are fixed by inserting the protruding part of the bolt into the catch plate and press-fitting the nut
· Equipment can be easily fixed with anchor bolts.
· This is the most common specification used when fixing equipment to the floor.
[Applications]
· Suitable for conveyors and other machines, etc., that vibrate in the upper part
· If the machine vibrates during operation, the vibration may cause a shift of the position due to long time use. It is safe to use this type- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 33.74- Days to Ship: 4 Day(s) or more -
WAKISANGYO
[Features]
High-grade adjuster made with zinc die-casting.
[Applications]
Used to stabilize wobbly desks and chairsStandard Price: MYR 20.96- Days to Ship: 8 Day(s) or more -
Adjuster, Rubber Receiver Type D-G/D-GII
DAIWARASHI
An adjuster with a rubber-made base that is also optimal for slip prevention. Note: Please be advised that the model number in VONA has been changed from "D-G II" to "D-G2."
[Features]
· A rubber cover is used for the entire receiver, and an iron core is included inside.Standard Price: MYR 80.35 Days to Ship: 4 Day(s) or more -
Adjuster For Heavy Loads (Bearing Equipped), D-H/HT Series
DAIWARASHI
It is a heavy-duty adjuster with a large pedestal and a built-in bearing that enables smooth level adjustment even if it is not a heavy-duty machine.
[Features]
· Suitable for adjustment of heavy machinery
· The use of large-diameter bolts ensures outstanding stability.- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 201.66- Days to Ship: 4 Day(s) or more -
Adjuster For Heavy Duty Applications D-C-L/D-C3/HW Series
DAIWARASHI
This is a long screw type adjuster that allows the main body to be jacked up higher.
[Features]
· The surface of the catch plate is finished with grinding processing using a lathe, giving it a sense of luxury.
· By making the base section larger (⌀80), stability is increased and the load on the floor can be distributed.- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 59.22- Days to Ship: 4 Day(s) or more -
Adjuster Standard Catch plate With Plastic, D-AII/D-BII/D-F-C/NC series
DAIWARASHI
A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
[Features]
· Does not stain or damage floors since a special plastic is molded into the receiver.
· The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
· Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 18.96- Days to Ship: 4 Day(s) or more -
WAKISANGYO
[Features]
· Sturdy felt prevents scratches on the floor.
· Reduces noisy vibrations when moving furniture.
[Applications]
· Used to adjust and stabilize wobbly desks and chairsStandard Price: MYR 52.05- Days to Ship: 8 Day(s) -
Standard Type Adjuster - JA Type
Jmec
Since a hex nut is press-fitted in from the bottom of the catch plate, mounting can be performed easily using an impact wrench, etc.
Standard Price: MYR 19.87- Days to Ship: 14 Day(s) or more -
Jmec
Since a hex nut is press-fitted in from the bottom of the catch plate, mounting can be performed easily using an impact wrench, etc. The catch plate has a special non-slip resin baked onto it so it does not dirty the floor or become scratched.
Standard Price: MYR 29.00- Days to Ship: 14 Day(s) or more -
Adjustment Pads/Space Saving Type
MISUMI
- Leveling Mounts-Space Saving Type.
- The part number is NFJNCT.
- Type of product : Adjusting Bolt.
- Material: SS400 steel Equivalent.
- Leveling Mounts Surface Treatment: Trivalent Chromate Solution.
- Nominal of Thread size (M): 8, 10, 12 and 16.
- Thread Length size: 50, 75, 100, 125, 130, 150 and 180 mm.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.
- Carbon steel is chromate plated for bright appearance and better corrosion resistance.- Volume Discount
Standard Price: MYR 25.31- Days to Ship: 4 Day(s) or more -
MISUMI
- Economy Leveling Mounts.
- The part number is MAJB.
- Type of Leveling Mounts: Adjusting Bolt.
- Body Material: SWRCH Carbon Steel.
- Surface Treatment: Trivalent Chromate solution.
- Nominal of Thread size (M): 16.
- Screw Thread Length: 75 and 150 mm.
- Allowable Load: 3.7 KN.
- The screw and the pad are one piece.
- Carbon steel is chromate plated for bright appearance and better corrosion resistance.
- In some applications, adjustable pads are used to level, support, or align different components or machinery.- Volume Discount
Standard Price: MYR 12.68- Days to Ship: 2 Day(s) or more -
Adjustment Pads/Fixed Type, Economy series
MISUMI
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 9.90- Days to Ship: 6 Day(s) or more -
Adjuster for Anchor Fixing (Large Pedestal Type) D-E-W
DAIWARASHI
A medium load type adjuster for anchor fixing in which the base is wide and stable
[Features]
· By increasing the size and thickness of the pedestal part, the stability after installation and the resistance horizontal shaking of the anchor fixing part have been improved.
· Note: The screw shaft tilts somewhat- CAD ：
- 2D
Standard Price: MYR 70.56 Days to Ship: 4 Day(s) or more -
Thread Section Anti-Shaking Adjuster for Anchor Fixing D-J-EII/AT Series
DAIWARASHI
An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- CAD ：
- 2D
Standard Price: MYR 37.52- Days to Ship: 4 Day(s) or more -
Adjuster, Standard Receiver, Small Diameter Type D-F/D-F-C
DAIWARASHI
An adjuster whose screw and base have small diameters
[Features]
· Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
· Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
· A light load type with a receiver diameter that is also small.
· Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.- CAD ：
- 2D
Standard Price: MYR 12.83- Days to Ship: 4 Day(s) or more -
DAIWARASHI
A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."
[Features]
· A special adjuster for walls.
· Please use together with D-D II.
· Please use accessories such as hex nuts, etc.
· The portion that makes contact with the wall is folded.
· As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
· In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
· Please refer to the drawings for use.- CAD ：
- 2D
Standard Price: MYR 30.09- Days to Ship: 4 Day(s) or more -
WAKISANGYO
[Features]
Made up of 2 parts, so the upper part (integrated with the bolt) can rotate independently of the base. This enables easy height adjustment without needing to lift the furniture.
[Applications]
Used to adjust and stabilize desks and chairsStandard Price: MYR 22.95- Days to Ship: 8 Day(s) -
WAKISANGYO
[Features]·Heavy objects can also be level-adjusted with a wrench. [Applications]·For desks, chairs, etc.
Standard Price: MYR 17.25- Days to Ship: 15 Day(s) -
SUN Adjusting Bolt for Heavy Weight S-W Series
SUN FASTENER
[Reliable quality]Adjuster leveling mount of Sun Fastener parts.
It is a SUN Adjust Bolt leveling mount for heavy items.
■Strike plate diameter: ø60
■Thread diameter: M12/M16/M20- CAD ：
- 2D
Standard Price: MYR 52.53- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Thread Length L1(mm) |
| Nominal of Thread M(mm) |
| Features/Applications |
| Type |
| Main Body Height E(mm) |
| Adjusting Bolt Shape Type |
| Body Material |
| Properties |
| Bottom Rubber Material |
| Allowable Load Range(kN) |
| Mounting Shape Type |
| Thread Material |
| Main Body Surface Treatment |
| Swivel Angle θ(deg) |
| Screw Length (Range)(mm) |
| Height Adjusting Handle |
| Thread Surface Treatment |
| Swivel Mechanism |
| Screw Material (Details) |
| Function Features |
| Material Details |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NABEYA BI-TECH | MISUMI | DAIWARASHI | DAIWARASHI | MISUMI | NABEYA BI-TECH | NABEYA BI-TECH | MISUMI | MISUMI | DAIWARASHI | DAIWARASHI | MISUMI | MISUMI | MISUMI | DAIWARASHI | DAIWARASHI | MISUMI | WAKISANGYO | NABEYA | DAIWARASHI | WAKISANGYO | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | WAKISANGYO | Jmec | Jmec | MISUMI | MISUMI | MISUMI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | WAKISANGYO | WAKISANGYO | SUN FASTENER |
| Product Series | Adjuster For Light Anti-Vibration Use With Rubber Base, D/RCR/REP/RSI Series | Adjuster for Heavy Loads with Rubber (Bearing Equipped), D-H-R/HTR Series | Adjuster for Heavy Loads (Catch Plate Wide Type) D-CIII-W/HW2 Series | Adjuster Standard Catch plate With Plastic, D-AII/D-BII/D-F-C/NC series | Thread Section Anti-Shaking Adjuster for Anchor Fixing D-J-EII/AT Series | ||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
| Days to Ship | 1 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 1 Day(s) or more | 13 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 14 Day(s) or more | 14 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 15 Day(s) | 5 Day(s) or more |
| Thread Length L1(mm) | 30 ～ 300 | 75 ～ 300 | 14 ～ 25 | 75 ～ 180 | 75 ～ 130 | 50 ～ 180 | 75 ～ 180 | 40 ～ 125 | 14 ～ 40 | 50 ～ 200 | 50 ～ 180 | 60 ～ 180 | 43 ～ 198 | 40 ～ 125 | 20 ～ 100 | 25 ～ 32 | 100 ～ 200 | 65 ～ 180 | - | 24 ～ 32 | 20 ～ 100 | 65 ～ 200 | 100 ～ 200 | 60 ～ 130 | 9 ～ 28 | 75 ～ 180 | 65 ～ 200 | 21 ～ 26.5 | 100 | 100 ～ 200 | 150 ～ 250 | 50 ～ 200 | 17.5 ～ 31.5 | 100 ～ 180 | 100 ～ 180 | 50 ～ 180 | 75 ～ 150 | 75 ～ 180 | 130 | 65 ～ 200 | 50 ～ 100 | 100 ～ 130 | 24 ～ 26 | 27.5 ～ 52.5 | 75 ～ 250 |
| Nominal of Thread M(mm) | 5 ～ 20 | 10 ～ 24X1.5 | 6 ～ 12 | 10 ～ 20 | 10 ～ 16 | 8 ～ 20 | 10 ～ 20 | 8 ～ 16 | 5 ～ 10 | 8 ～ 20 | 12 ～ 20 | 10 ～ 20 | 10 ～ 24 | 8 ～ 16 | 8 ～ 12 | 6 ～ 10 | 20 ～ 36 | 12 ～ 20 | 10 ～ 16 | 8 ～ 12 | 8 ～ 12 | 12 ～ 20 | 16 ～ 30 | 10 ～ 16 | 6 ～ 8 | 16 ～ 20 | 12 ～ 20 | 6 ～ 10 | 16 | 20 ～ 36 | 12 ～ 20 | 8 ～ 20 | 6 ～ 10 | 12 ～ 20 | 12 ～ 20 | 8 ～ 16 | 16 | 10 ～ 20 | 16 | 12 ～ 16 | 8 ～ 10 | 16 | 8 | 8 ～ 10 | 12 ～ 20 |
| Features/Applications | - | - | - | - | - | - | - | - | - | Corrosion Resistance / Chemical Resistance / Insulation / Heat Resistance / Vibration Resistance / Oil Resistance / Solvent Resistance / Aging Resistance | - | - | - | - | - | - | Vibration Resistance / 耐静電気 / 耐電性 | Not Applicable | - | - | - | Vibration Resistance | Not Applicable | - | - | - | Vibration Resistance | - | - | Not Applicable | Not Applicable | Heat Resistance / Not Applicable / Aging Resistance | - | - | - | - | - | - | - | Not Applicable | - | - | - | - | - |
| Type | - | - | - | - | - | - | - | Adjusting Bolt | Mounting | Various Adjusters | Adjusting Bolt | - | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Mounting | Adjusting Bolt / Various Adjusters | Adjusting Bolt / Various Adjusters | - | Mounting | Adjusting Bolt | Adjusting Bolt / Various Adjusters | Adjusting Bolt / Various Adjusters | - | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt / Various Adjusters | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt / Various Adjusters | Adjusting Bolt / Various Adjusters | Various Adjusters | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | - | - | - | Adjusting Bolt | Various Adjusters | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt |
| Main Body Height E(mm) | 18 | 18 | - | - | - | - | 18 | 4 ～ 8.5 | - | 13 ～ 17 | 17 | - | 17.5 ～ 29 | 4 ～ 8.5 | 17.7 ～ 23 | 16.5 | 35 ～ 42 | 15 ～ 18 | 39 ～ 44.5 | 11 ～ 54 | 28.2 ～ 35.4 | 22 | 22 ～ 23 | 18 | 8.5 ～ 10.5 | 17 ～ 21 | 17 ～ 19 | 10.5 ～ 12.5 | 30 | 29.5 ～ 36.5 | 17 ～ 22 | 13.5 ～ 22 | 9.5 ～ 11 | 14 ～ 18 | 16 ～ 23 | 11 ～ 20 | 6 | 18 | 19 | 17 | 12.5 ～ 13.5 | 18 | 15 ～ 23 | 11 ～ 12 | 101 ～ 281 |
| Adjusting Bolt Shape Type | Standard | - | - | Rubber Foot & Anchor Bolt Fixing Type | Standard | Rubber Foot Type | Anchor Bolt Mounting Type | Standard / Rubber Foot Type | - | Rubber Foot Type | Standard | Rubber Foot Type | Standard / Rubber Foot Type / Anchor Bolt Mounting Type / Rubber Foot & Anchor Bolt Fixing Type | Standard | Standard | - | Built-in Bearing Type | Standard | Tapped Socket Type | - | - | Rubber Foot Type | Standard | - | Standard | Standard | Anchor Bolt Mounting Type / Rubber Foot & Anchor Bolt Fixing Type | Rubber Foot Type | Rubber Foot Type | Built-in Bearing Type | Standard | Rubber Foot Type | Standard | Standard | Standard | - | - | Rubber Foot & Anchor Bolt Fixing Type | Rubber Foot & Anchor Bolt Fixing Type | Anchor Bolt Mounting Type | Standard | Anchor Bolt Mounting Type | Standard | Standard | Standard |
| Body Material | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Nylon 6 | Plastic | Steel | Steel | Stainless Steel / Steel | Nylon 6 | Steel | Steel | Stainless Steel / Steel | Steel | Steel | Plastic | Plastic | - | Steel | Steel / Cast Iron | Steel / Plastic | Polyethylene / Other Plastic | Stainless Steel / Cast Iron | Steel | Zinc Alloy | Synthetic Rubber (EPDM Synthetic Rubber) | Steel | Steel / Cast Iron | Steel | Plastic | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Nylon 6 | Nylon 6 | Steel |
| Properties | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Vibration Control | Standard | Standard | Standard | Standard | Standard / Vibration Control | Standard | Standard | Impact Resistance | Standard | Standard / Vibration Control | Standard | Vibration Control | Standard | Standard | Standard / Heat Resistance | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Vibration Control | Standard | Standard | Standard | Standard | Standard |
| Bottom Rubber Material | - | - | - | - | - | Chloroprene Rubber / Elastomer / Neoprene Rubber / Others / Synthetic Rubber | - | - | - | Chloroprene Rubber / Ethylene Propylene Rubber / Silicon | - | Nitrile Rubber | - | - | - | - | Chloroprene Rubber | - | - | - | - | Chloroprene Rubber | - | - | - | - | - | ABS Resin | - | - | - | ABS Resin / Polyvinyl Chloride | - | - | - | - | - | - | - | - | ABS Resin | - | - | - | - |
| Allowable Load Range(kN) | - | - | - | - | - | - | - | - | - | 1.1～6.0 / 6.1～10.0 | - | - | - | - | - | - | 6.1～10.0 | 1.1～6.0 | - | - | - | 6.1～10.0 | 15.1～ | - | - | - | 1.1～6.0 / 6.1～10.0 | - | - | 15.1～ | 15.1～ | 1.1～6.0 | - | - | - | - | - | - | - | 1.1～6.0 | - | - | - | - | - |
| Mounting Shape Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | - | Steel | Steel | Steel | Steel | Stainless Steel / Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Main Body Surface Treatment | Trivalent Chromate | Trivalent Chromate | Not Provided | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Not Provided | Not Provided | Trivalent Chromate | Trivalent Chromate | Not Provided | Not Provided | Trivalent Chromate | Trivalent Chromate | - | Trivalent Chromate | Trivalent Chromate | Not Provided | - | - | Trivalent Chromate | Trivalent Chromate | - | - | Trivalent Chromate | Trivalent Chromate | Not Provided | Not Provided | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Not Provided | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Not Provided | Not Provided | Trivalent Chromate |
| Swivel Angle θ(deg) | - | - | 15 | - | 15 | - | - | 30 | - | - | - | 15 | 30 | 30 | 14 | - | - | - | 15 | - | 30 | - | - | 15 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Length (Range)(mm) | - | - | - | - | - | - | - | - | - | 40.1～70 / 70.1～100 / 100.1～130 / 130.1～150 / 150.1～ | - | - | - | - | - | - | 70.1～100 / 130.1～150 / 150.1～ | 100.1～130 | - | - | - | 40.1～70 / 70.1～100 / 150.1～ | 150.1～ | - | - | - | 40.1～70 / 70.1～100 / 100.1～130 / 130.1～150 / 150.1～ | - | - | 150.1～ | 130.1～150 / 150.1～ | 40.1～70 / 70.1～100 / 100.1～130 / 130.1～150 / 150.1～ | - | - | - | - | - | - | - | 40.1～70 / 70.1～100 / 100.1～130 / 150.1～ | - | - | - | - | - |
| Height Adjusting Handle | Not Provided | Not Provided / Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - |
| Thread Surface Treatment | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate |
| Swivel Mechanism | Not Provided | Not Provided | Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Provided | Provided | - | Not Provided | Not Provided | Provided | - | Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Screw Material (Details) | - | - | - | - | - | - | - | - | - | SS400 Equiv. | - | - | - | - | - | - | SS400 Equiv. | SS400 Equiv. | - | - | - | SS400 Equiv. | SS400 Equiv. | - | - | - | SS400 Equiv. | - | - | SS400 Equiv. | SS400 Equiv. | SS400 Equiv. | - | - | - | - | - | - | - | SS400 Equiv. | - | - | - | - | - |
| Function Features | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Built-In Bearing | - | - | - | - | - | - | - | - | - | Anchor Bolt Fastening | - | - | Built-In Bearing | - | - | - | - | - | - | - | - | - | Anchor Bolt Fastening | - | - | - | - | - |
| Material Details | - | - | - | - | - | - | - | - | - | SS400 Equivalent | - | - | - | - | - | - | SS400 Equivalent | SS400 Equivalent | - | - | - | SS400 | SS400 Equivalent | - | - | - | SS400 Equivalent | - | - | SS400 | SS400 Equivalent | SS400 Equivalent | - | - | - | - | - | - | - | SS400 Equivalent | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Thread Length L1(mm)
- 9
- 11.5
- 11.6
- 14
- 16
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 21.5
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 39.5
- 40
- 41
- 42
- 43
- 45
- 49.5
- 50
- 51
- 51.5
- 52
- 52.5
- 53
- 54
- 56
- 58
- 59.5
- 60
- 61
- 62
- 63
- 65
- 66
- 67.5
- 68
- 69.5
- 70
- 71
- 71.5
- 72
- 73
- 75
- 78
- 80
- 85
- 90
- 91
- 95
- 98
- 99.5
- 100
- 101.5
- 108
- 110
- 114
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 250
- 280
- 300
[80-300/10mm Unit(s)]
-
Nominal of Thread M(mm)
-
Features/Applications
-
Type
- Adjusting Bolt
- Various Adjusters
- Mounting
- Precision Instrument
- Others
- Adjusting Screw with Rubber Grommet
-
Main Body Height E(mm)
- 4
- 5
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.8
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- 18.5
- 19
- 20
- 20.5
- 20.7
- 21
- 22
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- 27
- 27.5
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- 32.5
- 33
- 33.2
- 34
- 34.5
- 35
- 35.4
- 35.5
- 36
- 36.5
- 37
- 37.5
- 39
- 40
- 41
- 42
- 42.5
- 43
- 44
- 44.5
- 45
- 46
- 46.5
- 47
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 57
- 58
- 60
- 61
- 62
- 62.5
- 63
- 64
- 64.5
- 65
- 66
- 67
- 67.5
- 69
- 70
- 72
- 73
- 74.5
- 75
- 76
- 77
- 77.5
- 78.5
- 79
- 80
- 81
- 81.5
- 82.5
- 83
- 84.5
- 85
- 90
- 91
- 92
- 93
- 95
- 97
- 98.5
- 100
- 101
- 101.5
- 103
- 104
- 104.5
- 105
- 106
- 107
- 108
- 108.5
- 110
- 112
- 112.5
- 114.5
- 115
- 116
- 117
- 117.5
- 118.5
- 119
- 121.5
- 123
- 124
- 125
- 126
- 127
- 128
- 128.5
- 130
- 131
- 132
- 132.5
- 134
- 135
- 136
- 137
- 138
- 139
- 139.5
- 140
- 143
- 145
- 147
- 148
- 150
- 150.5
- 151
- 152
- 152.5
- 153
- 153.5
- 154
- 156
- 156.5
- 157
- 158
- 158.5
- 159
- 159.5
- 160
- 160.5
- 161
- 161.5
- 162
- 163
- 166.5
- 170
- 173
- 175
- 176
- 177
- 178
- 180
- 180.5
- 181
- 182.5
- 183
- 183.5
- 184
- 186
- 186.5
- 188
- 188.5
- 189
- 189.5
- 190
- 190.5
- 191.5
- 192
- 193
- 193.5
- 195
- 195.5
- 196.5
- 200
- 207
- 208
- 210
- 211
- 214
- 216
- 216.5
- 220
- 222
- 225
- 225.5
- 227
- 228
- 230
- 230.5
- 231
- 232.5
- 233
- 233.5
- 234
- 236
- 236.5
- 238
- 238.5
- 240
- 240.5
- 241.5
- 242
- 243
- 243.5
- 245
- 245.5
- 246.5
- 250
- 281
- 330
- 400
- 500
- 600
-
Adjusting Bolt Shape Type
-
Body Material
-
Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistance
- Electrical Conductivity
-
Bottom Rubber Material
-
Allowable Load Range(kN)
- 1.1～6.0
- 6.1～10.0
- 10.1～15.0
- 15.1～
-
Mounting Shape Type
-
Thread Material
-
Main Body Surface Treatment
-
Swivel Angle θ(deg)
-
Screw Length (Range)(mm)
- 40.1～70
- 70.1～100
- 100.1～130
- 130.1～150
- 150.1～
-
Height Adjusting Handle
-
Thread Surface Treatment
-
Swivel Mechanism
-
Screw Material (Details)
- SS400 Equiv.
- SUS304 Equiv.
- SUS304
- SUS303
-
Function Features
-
Material Details
- SUS304
- SUS304 Equivalent
- SS400
- SS400 Equivalent
- Polyamide
Narrow search by specifying Manufacturer
-
- DAIWARASHI (15)
- WAKISANGYO (5)
- Jmec (4)
- NABEYA BI-TECH (3)
- NABEYA (1)
- SUN FASTENER (1)
- RICHENGINEERING (0)
- HIKARI (0)
- GIFUSANKENKOGYO (0)
- IWATA MFG (0)
- YAHATA (0)
- NANSIN (0)
- KURASHIKI KAKO (0)
- TAKIGEN (0)
- OHNISHI MFG (0)
- OHNORUBBER (0)
- IMAO (0)
- TRUSCO NAKAYAMA (0)
CAD
-
- 2D
- 3D
Related Categories to Adjuster Bolt
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy