(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Stepping Motors（Holding torque (classification)：Up to 1.4）
| Days to Ship |
|
|---|
-
High Torque Stepper Motor PKP Series
ORIENTAL MOTOR
[Features]
・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available
・ Please choose the ideal motor according to your design scene
・ By using a motor with a high torque design, the manufacturer has achieved a torque increase of 1.2 to 1.7 times (maximum excitation static torque) compared to the standard type PK series of the same sizeStandard Price: MYR 400.63- Days to Ship: 4 Day(s) or more -
ORIENTAL MOTOR
This is an individual motor (component) of the stepper motor unit.
Standard Price: MYR 1,072.37- Days to Ship: 18 Day(s) or more -
ORIENTAL MOTOR
[Features]
· Equipped with newly developed ABZO sensor
· No external sensor required
· Reduced home return time
· No battery required
· Energy saving and low heat generation
· Three driver options to match your system configuration
· Easy operation enabled by the MEXE02 data setting softwareStandard Price: MYR 4,948.98- Days to Ship: 30 Day(s) or more -
Standard Price: MYR 593.67- Days to Ship: 22 Day(s) or more -
Controller Built-In Micro Step Driver and Stepper Motor Set CSA-UP Series
SHINANOKENSHI
Various operations can be programed in 8 tables
[Features]
· Integrated controller function for small and lightweight drivers.
· Various operations can be programed in 8 tables.
· 4 levels of micro step division (1, 2, 4, 16) selectable.
· Home return operation possible with origin sensor input.
· Easy setting with the included dedicated application.
· Input power supply: DVC24V.
Error output function.
· Abundant protection functions (excess heating, voltage and current).Standard Price: MYR 1,273.10- Days to Ship: 11 Day(s) or more -
Two-Shaft Simultaneous Drive Speed Controller and Double Stepper Motor Set CSA-UT Series
SHINANOKENSHI
[Features]
· Simultaneous 2 motors operation with one controller.
· Oscillator (pulse generator) built in.
· All motor operations can be set at numeric values.
· Equipped with 2 speed setting function (internal setting value / external analog input).
· Rotation speed: 1 to 1,800r/min, 1r/min may not reach maximum speed depending on the type of motor setting unit, (1,800r/min)
· Acceleration / deceleration setting: 0 to 99.99 seconds.
· Current setting: 0 to 2.00A.
· Continuous reciprocating rotation.
· Stall detection function (input feedback time).
· Lightweight and compact design: W70XH90XD33 mm, 190 g.Standard Price: MYR 1,797.25- Days to Ship: 6 Day(s) or more -
SHINANOKENSHI
[Features]
· Simultaneous 2 motors operation with one controller.
· Oscillator (pulse generator) built in.
· All motor operations can be set at numeric values.
· Equipped with 2 speed setting function (internal setting value / external analog input).
· Rotation speed: 1 to 1,800 r/min,1 r/min setting unit.
· Acceleration / deceleration setting: 0 to 99.99 seconds.
· Current setting: 0 to 2.00A.
· Continuous reciprocating rotation.
· Stall detection function (input feedback time).
· Lightweight and compact design: W70 × H90 × D33 mm, 190 g.Standard Price: MYR 2,153.61- Days to Ship: 11 Day(s) or more -
High-Output Microstep Driver and Stepper Motor Set CSA-BB Series
SHINANOKENSHI
Maximum high output: 48V, 6A
[Features]
· Maximum input voltage 48V, high power micro step driver with 6A maximum current.
· A maximum 3,200 divisions per revolution (minimum step angle: 0.1125°).
· Choose from 5 levels (1, 2, 4, 8, 16).
· 16 step current setting: 0 to 6A (Max).
· Stop current setting function.
· Protection function (excess heat and voltage protection).Standard Price: MYR 1,008.11- Days to Ship: 11 Day(s) or more -
Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit
SHINANOKENSHI
Various operations can be programed in 8 tables
[Features]
· Integrated controller function for small and lightweight drivers.
· Various operations can be programed in 8 tables.
· 4 levels of micro step division (1, 2, 4, 16) selectable.
· Home return operation possible with origin sensor input.
· Easy setting with the included dedicated application.
· Input power supply: DC24V.
· Error output function.
· Abundant protection functions (excess heating, voltage and current).Standard Price: MYR 1,649.46- Days to Ship: 11 Day(s) or more -
Step out detection driver & stepping motor set CSA-BX series
SHINANOKENSHI
Step-out detection, closed loop switchable by switch
[Features]
· Step-out detection and closed loop mode can be toggled by switch.
· Step-out detection possible (synchronization loss detection mode) using open loop control.
· Equipped with step-out prevention function (closed loop mode) using closed-loop control.
· Motor startup with speed filter, vibration reduction possible at stopping time.
· 4 step resolution (400, 800, 1600, 3200P/R).
· 13 step current setting: 0.6 to 3.0A
· Abundant protection functions (excess heat, excess regeneration, low voltage, excess load and speed).
· Input power supply: DC24V.
· Auto power down function.Standard Price: MYR 1,462.19 Days to Ship: 11 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Type Details |
| Type |
| Square Flange Size A(mm) |
| Power Supply |
| Voltage Specifications |
| Control Method |
| Step Angle(°) |
| Holding Torque (Range)(N･m) |
| Reducer |
| Drive Method |
| Backlash(°) |
| Holding torque (classification)(N·m) |
|
|
|
|
|
|
|
|
|
| |
| Brand | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | SHINANOKENSHI | SHINANOKENSHI | SHINANOKENSHI | SHINANOKENSHI | SHINANOKENSHI | SHINANOKENSHI |
| Product Series | Controller Built-In Micro Step Driver and Stepper Motor Set CSA-UP Series | Two-Shaft Simultaneous Drive Speed Controller and Double Stepper Motor Set CSA-UT Series | High-Output Microstep Driver and Stepper Motor Set CSA-BB Series | Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit | Step out detection driver & stepping motor set CSA-BX series | |||||
| Days to Ship | 4 Day(s) or more | 18 Day(s) or more | 30 Day(s) or more | 22 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more |
| Type Details | Motor Only | Motor Only | Motor Only | Motor Only | Set | Set | Set | Set | Set | Set |
| Type | Motor Only | Motor Only | Motor Only | Motor Only | - | - | - | - | - | - |
| Square Flange Size A(mm) | 56.4 | 42 | 42 | 56.4 ～ 60 | 60 | 60 | 60 | 56.4 | 60 | 56.4 |
| Power Supply | 2-phase | Single-phase / 3-phase ～ 5-phase | Single-phase / 3-phase ～ Single-phase | 2-phase | 2-phase | 2-phase | 2-phase | 2-phase | 2-phase | 2-phase |
| Voltage Specifications | DC Specification | AC200 Specification ～ DC Specification | AC200 Specification ～ DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification | DC Specification |
| Control Method | Open Loop | Closed Loop | Closed Loop | Open Loop | Open Loop | Open Loop | Open Loop | - | Open Loop | Open Loop |
| Step Angle(°) | 0.9 ～ 1.8 | 0.072 | 0.072 | 0.9 ～ 1.8 | 1.8 | - | - | 1.8 | 1.8 | 0.9 |
| Holding Torque (Range)(N･m) | 1.01 to 2.00 | - | - | - | - | - | - | - | - | - |
| Reducer | Not Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Drive Method | Bipolar | Unipolar | Bipolar | Unipolar | Unipolar | Unipolar | Unipolar | Bipolar | Unipolar | Unipolar |
| Backlash(°) | - | 0.034 ～ 0.42 | - | - | - | - | - | - | - | - |
| Holding torque (classification)(N·m) | Up to 1.4 | Up to 1.4 | Up to 1.4 | Up to 1.4 | Up to 1.4 | Up to 1.4 | Up to 1.4 | Up to 1.4 | Up to 1.4 | Up to 1.4 |
Loading...
Configure
Specification/Dimensions
-
Type Details
- Motors
- Built-in Driver
- Single Driver
- Motor Only
- Set
-
Type
- Set
- Motor Only
- Driver Only
-
Square Flange Size A(mm)
-
Power Supply
-
Voltage Specifications
-
Control Method
- Open Loop
- Closed Loop
-
Step Angle(°)
-
Holding Torque (Range)(N･m)
- Up to 0.10
- 0.11 to 1.00
- 1.01 to 2.00
- 2.01 or More
-
Reducer
- Not Provided
- Provided
-
Drive Method
-
Backlash(°)
-
Holding torque (classification)(N·m)
- 0.1 or Less
- Up to 0.2
- Up to 0.3
- Up to 0.4
- Up to 0.5
- Up to 0.6
- Up to 0.7
- Up to 0.8
- Up to 0.9
- Up to 1
- Up to 1.1
- Up to 1.2
- Up to 1.3
- Up to 1.4
- Up to 1.5
- Up to 1.6
- Up to 1.7
- Up to 1.8
- Up to 1.9
- Up to 2
- Up to 3
- Up to 4
- Up to 5
- Up to 10
- Up to 15
- Up to 20
- Up to 30
- Up to 40
- Up to 60
- Up to 80
- Up to 110
* -0.2 represents > 0.1/≤ 0.2.
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Stepping Motors
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy