(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
THE_CUT Chamfering / Centering Tools（work material：Stainless Steel）
Search by specifying the lower class category
Centering/Countersink
Chamfer, V-Grooves
Inner R
Replaceable Blade Type Chamfering Tools/Tips/Blades
| Days to Ship |
|
|---|
-
Chamfering Cutter Super Mentori-Maru MTMS 20/30
THE_CUT
[Features]
· Can be used like an end mill for machining materials from an un-machined state.
· Capable of ramping machining (α = 3°).
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute/4-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used.
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· The insert allows for chamfering up to C7. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.Standard Price: MYR 1,891.46- Days to Ship: 7 Day(s) or more -
Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V
THE_CUT
[Features]
· No need to turn over the work material. (Also removes through-hole burrs)
· Both sides can be chamfered with the one cutter tool.
· Ultra-fine particle carbide with TiAlN coating for a longer tool life.Standard Price: MYR 984.89- Days to Ship: 11 Day(s) or more -
Mini Corner Rounding Cutter, Carbide C-CRC-V
THE_CUT
[Features]
· Ideal for CNC machining.
· Capable of machining extremely thin workpieces.
· Simple regrinding/repolishing.Standard Price: MYR 478.64- Days to Ship: 18 Day(s) -
THE_CUT
[Features]
· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.
· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.
· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.Standard Price: MYR 531.31- Days to Ship: 5 Day(s) or more -
Point Set Drill, Carbide C-NC-PSD
THE_CUT
[Features]
· Allows for machining at higher speeds and a significantly longer tool life than with a high speed steel (TiAlN) point set drill.Standard Price: MYR 219.98- Days to Ship: 11 Day(s) or more -
Chamfering Cutter 90°, 3 Flutes, TiN Coat, CSQ-G
THE_CUT
[Features]
· The tool life is drastically improved through the use of 3 flutes and a TiN coating.
· No chatter.
· Capable of true circular machining.Standard Price: MYR 205.26- Days to Ship: 5 Day(s) or more -
Double Sided Chamfering Cutter 45° DFC
THE_CUT
[Features]
· Capable of V-grooving both front and back surfaces as well as the side surfaces.
· Capable of chamfering up to C2.8 for front chamfering.
· The use of a dedicated insert (4 cutting edges) delivers high precision machining.Standard Price: MYR 1,200.20- Days to Ship: 11 Day(s) or more -
Insert For New Tornado MT-CP/CC
THE_CUT
[Features]
Cutting speed (m/min): 60 to 150
Feed speed (mm/t): 0.02 to 0.08
Set screw: MST-4S, MST-2.5S, MST-3S, MST-2 (M5), MST-2L040 (M6)Standard Price: MYR 95.42- Days to Ship: 11 Day(s) or more -
Dedicated Insert For Double Face Cutter, MT-SDM/H
THE_CUT
Dedicated insert MT-SDM/H for THE CUT replaceable insert double-face chamfer tool.
Standard Price: MYR 80.05 Days to Ship: 11 Day(s) -
Insert For General Purpose Chamfering Cutter, MD-TD
THE_CUT
[Features]
· Carbide base material for a longer tool life. As 3 cutting edges can be used, it is also economical.Standard Price: MYR 115.80 Days to Ship: 18 Day(s) -
Insert For Seat Surface Cutter, MT-DC
THE_CUT
[Features]
Cutting speed (m/min): 40 to 100
Feed speed (mm/t): 0.04 to 0.1
Wrench: MFT-8/MFT-15Standard Price: MYR 262.12- Days to Ship: 10 Day(s) or more -
Chamfering Cutter Super Mentori-Maru MTMS 6.5/9
THE_CUT
[Features]
· Uses a positive lathe insert for a light cutting sharpness.
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used (however, the screws need to be changed).
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· With the insert, the MTMS9 is capable of machining up to C7 and the MTMS6.5 up to C4.5. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.
· Can be used like an end mill for machining materials from an un-machined state.·Standard Price: MYR 1,279.96 Days to Ship: 10 Day(s) or more -
Insert For Super Mentori-Maru ZERO
THE_CUT
[Features]
·The unique shape allows high-precision machining.
Set screw: MST-3S
Wrench: MFT-9Standard Price: MYR 174.88- Days to Ship: 10 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT |
| Product Series | Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V | ||||||||||||
| Days to Ship | 7 Day(s) or more | 11 Day(s) or more | 18 Day(s) | 5 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) | 18 Day(s) | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more |
| Tool Material Type | - | Carbide | Carbide | Carbide | Carbide | High-speed steel | - | - | Carbide | - | - | - | - |
| Tool Diameter (D)(mm) | - | 5 ～ 8.5 | 1 ～ 2.5 | 3 ～ 16 | 3 ～ 10 | 6.3 ～ 31 | 11 ～ 20 | - | - | - | - | - | - |
| Tip angle (θ) | - | 90° | - | 60 ～ 120 | 90 | 90 | - | - | - | - | - | - | - |
| Application | Hole Chamfer / Chamfering/Horizontal / V Groove / Other | Hole Chamfer / Drilling / Other | Round Chamfer | Centering (Positioning) / Chamfering/Horizontal / V Groove / Drilling / Other | Hole Chamfer | Hole Chamfer | Hole Chamfer / V Groove | - | Hole Chamfer | - | - | Hole Chamfer / Chamfering/Horizontal / V Groove / Other | - |
| work material | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] |
| Single blade, two blades | - | Single blade | Single blade | Single blade | Single blade | Single blade | - | - | - | - | - | - | - |
| Peripheral Blade Y/N | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coating Y/N | - | Available | Available | Available | NA | Available | - | - | Available | - | - | - | - |
| Coating Type | - | TiAlN | TiAlN | TiAlN | - | TiN | - | - | TiAlN | - | - | - | - |
| R Size (R)(mm) | - | - | 0.25 ～ 2.5 | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1～6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2~5
- 2～10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3～14
- 3～15
- 3.1
- 3.15
- 3.2
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10.1
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 16.5,20.5,25.0,37.0
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.4
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.5
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Narrow search by specifying Manufacturer
-
- MISUMI (36)
- FUJIGEN (58)
- IWATA TOOL (30)
- GUHRING (17)
- OSG (14)
- THE_CUT (13)
- ILIX (12)
- YAMAWA MFG (8)
- KYOWA SEIKO (7)
- ATOM (6)
- SANKO MFG (5)
- OKAZAKI SEIKO (4)
- ASAHI TOOLS (3)
- OKABE (3)
- TRUSCO NAKAYAMA (3)
- DIXI (2)
- Nine9 (2)
- NS TOOL (2)
- SANDVIK (2)
- 7 LEADERS (1)
- DAISHOWASEIKI (1)
- NOGA_JAPAN (1)
- SPEED TIGER (1)
- UNION TOOL (1)
- RYOCO SEIKI (0)
- SKC (0)
- ESCO (0)
- NIKKENKOSAKU (0)
- STAR-M (0)
- FUKUDA (0)
- RUKO (0)
- ATI (0)
- MAPAL (0)
- MAKOTOLOY (0)
- ALPEN (0)
- DIJET (0)
- EIKOSHA (0)
- DAIICHITOOL (0)
- TAIYO-TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Chamfering / Centering Tools
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy