(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
THE_CUT Chamfering / Centering Tools（Application：Other）
Search by specifying the lower class category
Centering/Countersink
Chamfer, V-Grooves
Inner R
Replaceable Blade Type Chamfering Tools/Tips/Blades
| Days to Ship |
|
|---|
-
Chamfering Cutter Super Mentori-Maru MTMS 20/30
THE_CUT
[Features]
· Can be used like an end mill for machining materials from an un-machined state.
· Capable of ramping machining (α = 3°).
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute/4-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used.
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· The insert allows for chamfering up to C7. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.Standard Price: MYR 1,891.46- Days to Ship: 7 Day(s) or more -
Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V
THE_CUT
[Features]
· No need to turn over the work material. (Also removes through-hole burrs)
· Both sides can be chamfered with the one cutter tool.
· Ultra-fine particle carbide with TiAlN coating for a longer tool life.Standard Price: MYR 984.89- Days to Ship: 11 Day(s) or more -
THE_CUT
[Features]
· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.
· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.
· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.Standard Price: MYR 531.31- Days to Ship: 5 Day(s) or more -
THE_CUT
[Features]
· Capable of spot cutting.
· A type in which the insert can be interchanged so no regrinding/repolishing required.
· Features a highly rigid body and dedicated insert for high-efficiency machining.
· Can be used like an end mill for machining materials from an un-machined state.
· Positioning precision is further increased for nose R0.4.Standard Price: MYR 827.98- Days to Ship: 7 Day(s) or more -
Super Mentori-Maru ZERO For Automatic Lathes, MTMS
THE_CUT
[Features]
· Employs shank diameters of ø7 and ø10 specialized for automatic lathes.
· Capable of spot cutting.
· Dedicated insert for nose R0.4 further improves positioning precision.
· A type in which the insert can be interchanged so no regrinding/repolishing required.Standard Price: MYR 827.98 Days to Ship: 11 Day(s) or more -
Chamfering Cutter Super Mentori-Maru MTMS 6.5/9
THE_CUT
[Features]
· Uses a positive lathe insert for a light cutting sharpness.
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used (however, the screws need to be changed).
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· With the insert, the MTMS9 is capable of machining up to C7 and the MTMS6.5 up to C4.5. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.
· Can be used like an end mill for machining materials from an un-machined state.·Standard Price: MYR 1,279.96 Days to Ship: 10 Day(s) or more -
Super Mentori-Maru ZERO For Lathes, NC-MT
THE_CUT
[Features]
· An internal lubrication specification and shank design specialized for use with a lathe.
· Capable of spot cutting.
· A type in which the insert can be interchanged so no regrinding/repolishing required.
· Features a highly rigid body and dedicated insert for high-efficiency machining.Standard Price: MYR 1,271.33 Days to Ship: 11 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
| |
| Brand | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT |
| Product Series | Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V | ||||||
| Days to Ship | 7 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 10 Day(s) or more | 11 Day(s) |
| Tool Material Type | - | Carbide | Carbide | - | - | - | - |
| Tool Diameter (D)(mm) | - | 5 ～ 8.5 | 3 ～ 16 | 12 ～ 15.2 | 13 | - | 12 ～ 14.5 |
| Tip angle (θ) | - | 90° | 60 ～ 120 | - | - | - | - |
| Application | Other | Other | Other | Other | Other | Other | Other |
| work material | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | - | - | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | - |
| Single blade, two blades | - | Single blade | Single blade | - | - | - | - |
| Peripheral Blade Y/N | - | - | - | - | - | - | - |
| Coating Y/N | - | Available | Available | - | - | - | - |
| Coating Type | - | TiAlN | TiAlN | - | - | - | - |
| R Size (R)(mm) | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1～6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2~5
- 2～10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3～14
- 3～15
- 3.1
- 3.15
- 3.2
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10.1
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 16.5,20.5,25.0,37.0
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.4
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.5
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- THE_CUT (7)
- Nine9 (2)
- DIJET (1)
- FUKUDA (1)
- YAMAWA MFG (1)
- ILIX (0)
- RYOCO SEIKI (0)
- OKABE (0)
- SKC (0)
- ESCO (0)
- NIKKENKOSAKU (0)
- UNION TOOL (0)
- SPEED TIGER (0)
- OSG (0)
- STAR-M (0)
- KYOWA SEIKO (0)
- RUKO (0)
- DAISHOWASEIKI (0)
- ATI (0)
- SANDVIK (0)
- 7 LEADERS (0)
- MAPAL (0)
- MAKOTOLOY (0)
- NOGA_JAPAN (0)
- GUHRING (0)
- ALPEN (0)
- ASAHI TOOLS (0)
- DIXI (0)
- EIKOSHA (0)
- FUJIGEN (0)
- TRUSCO NAKAYAMA (0)
- DAIICHITOOL (0)
- OKAZAKI SEIKO (0)
- ATOM (0)
- TAIYO-TOOL (0)
- SANKO MFG (0)
- IWATA TOOL (0)
- NS TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Chamfering / Centering Tools
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy