(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
ICHIGUCHI Wheels with Shafts（Application：Polishing）
| Days to Ship |
|
|---|
-
Flap Wheel【5 Pieces Per Package】
ICHIGUCHI
Uses a polishing cloth with alumina abrasive. Worn abrasive material is promptly ejected, enabling an even finish every time. As it has high adaptability to workpieces, it can be used anywhere, even flat, curved and irregular surfaces. Suitable for deburring, removing rust and removing scratches from iron and nonferrous metal as well as for grinding and polishing the inside and openings of pipes.
Standard Price: MYR 164.02- Days to Ship: 4 Day(s) or more -
Cone paper L/Z【50 Pieces Per Package】
ICHIGUCHI
[Features]
· The size is long, so compared to conventional cone paper, the work efficiency has been improved.
· A soft, dedicated holder that is easy to hold and can be used to perform smooth polishing work.
· Polishing cloth is processed in a conical shape for performance of plane polishing without bringing the workpiece and tool horizontal.
· Extremely convenient when the work environment is not free.Standard Price: MYR 292.46- Days to Ship: 4 Day(s) or more -
Super diamond flap (shaft diameter: 6 mm)
ICHIGUCHI
[Features]
· Diamond sheets are formed into a flap wheel.
· Provides gentle contact unavailable in conventional diamond grinding stones.
· Also, the air cooling effect operates to enable dry use.
[Applications]
· Grinding and polishing ceramics, carbide, stone and difficult-to-cut materialStandard Price: MYR 153.93- Days to Ship: 8 Day(s) -
AC Drum【1-10 Pieces Per Package】
ICHIGUCHI
[Features]
· Uses tube-shaped paper with a dedicated rubber holder.
· Available in abundant sizes, with smooth touch.
· Because it is made of rubber, there are no concerns about it carving into the workpiece.- Volume Discount
Standard Price: MYR 122.99- Days to Ship: 4 Day(s) or more -
Skoo Light Wheel S【5 Pieces Per Package】
ICHIGUCHI
Suitable for work on both flat surfaces and irregularly shaped surfaces. S (standard item) uses only non-woven fabric.
[Features]
· Nonwoven fabric abrasive material has been processed into a wheel shape.
· Suitable for polishing surfaces, curves and interiors.
· Made of nonwoven fabric abrasive material only, for a light finish with a soft touch.Standard Price: MYR 215.39- Days to Ship: 4 Day(s) or more -
Polyethylene Foil T【10 Pieces Per Package】
ICHIGUCHI
The structure is layered to adapt to uneven surfaces. Available from 10 mm in diameter, which is ideal for detailed polishing. One laminated sheet is called 1P.
[Features]
· Utilizes a special nonwoven fabric abrasive material.
· It produces glossier finish as compared to the Sco-Light.
· The structure is layered to adapt to uneven surfaces.
· Poli Light Wheel T from 10 mm to 30 mm diameters are available, which are ideal for detailed polishingStandard Price: MYR 309.09- Days to Ship: 4 Day(s) or more -
AC Band【50 Pieces Per Package】
ICHIGUCHI
[Features]
· Uses tube-shaped paper with a dedicated rubber holder.
· Available in abundant sizes, with smooth touch.
· Performs the partial repair of molds and grinding/polishing of fine parts accurately without waste.Standard Price: MYR 142.36- Days to Ship: 4 Day(s) or more -
Cup Foil【5 Pieces Per Package】
ICHIGUCHI
Makes working with the head surface of flap wheels possible. Grinding and polishing on the bottom of the L-shaped or concave parts, which was difficult with conventional wheels, can be performed efficiently. Uses an alumina abrasive to support all kinds of work.
Standard Price: MYR 254.18- Days to Ship: 5 Day(s) or more -
SKO Light Foil M【5 Pieces Per Package】
ICHIGUCHI
Nonwoven fabric abrasive material has been processed into a wheel shape. Suitable for work on both flat surfaces and irregularly shaped surfaces. M (mixed item) is a nonwoven fabric abrasive material mixed with polishing cloth. M (mixed item) has higher grinding power than S (standard item), and it is less likely to scorch. Also, the hairline pattern provided by moving the M type straight in one direction is very popular.
Standard Price: MYR 251.68- Days to Ship: 4 Day(s) or more -
SKO Light Foil T【5-10 Pieces Per Package】
ICHIGUCHI
One laminated sheet is called 1P.
[Features]
· The structure is layered to adapt to uneven surfaces.
· Available from 10 mm in diameter, which is ideal for detailed polishing.Standard Price: MYR 215.42- Days to Ship: 4 Day(s) or more -
Slit Wheel【5 Pieces Per Package】
ICHIGUCHI
The flap wheel vanes are cut to increase the outstanding ability to adapt to workpieces. In areas with overlapping steep curves, thread ridges, and multiple grooves, each and every workpiece is carefully polished. Suitable for grinding irregularly shaped pipes. Uses an alumina abrasive.
Standard Price: MYR 257.30 Days to Ship: 4 Day(s) or more -
ICHIGUCHI
Polishing cloth is processed in a conical shape for performance of plane polishing without bringing the workpiece and tool horizontal. Extremely convenient when the work environment is not free.
[Features]
· The size is long, so compared to conventional cone paper, the work efficiency has been improved.
· Soft, dedicated holder that is easy to hold and can be used to perform smooth polishing workStandard Price: MYR 11.07- Days to Ship: 7 Day(s) or more -
Polyethylene Foil【5 Pieces Per Package】
ICHIGUCHI
[Features]
· Special non-woven fabric abrasive material reduces deposition on the workpiece.
· Ideal for removing the nap of wood, scratch blurring on metal curved surfaces and in metal cylinders, glazing and polishing, adjusting the surface roughness before painting or laminating and removing scratches from metal.
· Poli Light Wheels from 30 mm to 100 mm in diameter are availableStandard Price: MYR 253.59- Days to Ship: 4 Day(s) or more -
Micro Flap【10 Pieces Per Package】
ICHIGUCHI
[Features]
· A standard flexible polishing wheel with shaft (diameter 10 to 25 mm).
· The small flap wheel has been carefully crafted.
· No core run-out even under high-speed rotation, for smooth working of fine gaps.
· It is ideal for work such as detailed modification of machine parts, partial repair of molds, cleaning inner surface of small diameter pipes and deburring grooves.
· Uses an alumina abrasive.Standard Price: MYR 269.55- Days to Ship: 4 Day(s) or more -
Super Diamond Band【5 Pieces Per Package】
ICHIGUCHI
[Features]
· Diamond product that can be used dry.
· Product commercialized by replacing polishing cloth with diamond sheet.
· Features excellent sharpness and a beautiful finish.
· Super Diamond (all-diamond): Boasts sharp grinding power and high durabilityStandard Price: MYR 382.38 Days to Ship: 5 Day(s) or more -
Diamond Band【10 Pieces Per Package】
ICHIGUCHI
The diamond abrasive is affixed to a base material by using glue. It is flexible, so it can be processed with small tools. For waste-free polishing of detailed parts of difficult-to-cut materials
[Features]
· Diamond product that can be used dry.
· Made of resin bond diamond.
· Features a smooth touch.
· Use according to the applicationStandard Price: MYR 191.42- Days to Ship: 6 Day(s) or more -
ICHIGUCHI
The diamond abrasive is affixed to a base material by using glue. It is flexible, so it can be processed with small tools. Suitable for work with materials that are difficult-to-cut or have irregular surfaces.
[Features]
· Diamond product that can be used dry.
· Made of resin bond diamond.
Features a smooth touch.
· Use according to the application- Volume Discount
Standard Price: MYR 99.80- Days to Ship: 5 Day(s) or more -
Super diamond flap Shaft diameter 3 mm
ICHIGUCHI
Sharp cutting edge and diamond sheet abrasive with superb hardness are machined into a tip tool. Characteristics include strong grinding ability, excellent durability and a gentle touch. Allows for work as intended without chipping hard and brittle workpieces. Both a disc type and a flap type with shaft are available. Both wet and dry types can be used for the Super Diamond series.
[Features]
· Diamond product that can be used dry.
· Product commercialized by replacing polishing cloth with diamond sheet.
· Features excellent sharpness and a beautiful finish.
· Super Diamond (all-diamond): Boasts sharp grinding power and high durability- Volume Discount
Standard Price: MYR 129.60- Days to Ship: 5 Day(s) or more -
ICHIGUCHI
[Features]
● Very fast since the micro flap works on a line and the polygon band mini works on a surface.
● Post-use dust is surprisingly minimal compared to micro flaps, and can easily remove small whiskers and burrs from small holes.
● Easily performs hairline finishing on iron, aluminum and stainless steel.Standard Price: MYR 23.62- Days to Ship: 8 Day(s) or more -
Polygon Band Mini Drum【5 Pieces Per Package】
ICHIGUCHI
Very fast since the micro flap works on a line and the polygon band mini works on a surface. Work time is 1/5. Post-use dust is surprisingly minimal compared to micro flaps. Disposal weight is 1/5. Whisker-like burrs are removed easily from small holes. Easily performs hairline finishing on iron, aluminum and stainless steel.
Standard Price: MYR 216.33 Days to Ship: 5 Day(s) or more -
Polygon Band A【10 Pieces Per Package】
ICHIGUCHI
Workpiece is regarded as a plane, not as a point, thus dramatically increasing work efficiency (approx. three times greater efficiency). Shape of blade results in effective air cooling, with workpiece retaining minimal heat. Attaching the dedicated drum makes it possible to change to the required granularity with a single action. Industrial waste volume is 1/3, to be environmentally friendly. Hairline finishing is easy and neat. This product has a soft touch and does not carve deep.
Standard Price: MYR 199.15- Days to Ship: 4 Day(s) or more -
Polygon Band Z【10 Pieces Per Package】
ICHIGUCHI
Gripping the entire workpiece rather than just at a single point greatly increases work efficiency (by approximately 3 times). A multi-vane design that uses an air-cooling effect to reduce heat build-up on the workpiece. Equipped with a dedicated drum, allowing single-action conversion to the required grit size. Environmentally-friendly product producing 1/3 of the weight of industrial waste. Easy and clean hair-line finishing. Soft-touch operation prevents deep boring.
Standard Price: MYR 211.52- Days to Ship: 4 Day(s) or more -
Polygon Band A/Z【10 Pieces Per Package】
ICHIGUCHI
[Features]
· The multi-blade shape creates a cooling effect that reduces heat accumulation in the workpiece. Equipped with a dedicated drum that enables single-action replacement with the required particle size.
· Product has less environmental impact, with 1/3 industrial waste.
[Applications]
· Grinding/polishing of iron and stainless steel
· Pipe inner surface polishing
· Rounding edges and hole circumferences
· Deburring small burrs, removing rustStandard Price: MYR 241.14- Days to Ship: 5 Day(s) or more -
Slit Polishing Wheel Hand Type
ICHIGUCHI
[Features]
· The wound paper flexibly forms to the workpiece, easily removing burrs from molded workpieces.
[Applications]
· Deburring after punch press or laser machining
· Scratch elimination on sheet metal and wood workpiece
· Rust removal and small scratch removalStandard Price: MYR 283.91- Days to Ship: 8 Day(s) -
BS Nejitaru Flap Wheel (Hexagonal Shaft)
ICHIGUCHI
[Features]
· Smoothly polishes workpieces with the polishing properties of sandpaper and suitable elasticity.
· Uses Japan-made abrasive materials and shafts.
[Applications]
· For polishing stainless steel and metal, removing rust and paint, and for woodwork.- Volume Discount
Standard Price: MYR 35.44- Days to Ship: 9 Day(s) -
BS Nejitaru Flap U-Shaped Wheel (Hexagonal Shaft)
ICHIGUCHI
[Features]
·Smoothly polish the object with the abrasive power and moderate elasticity of the sandpaper.
·Abrasives and shafts made in Japan are used.
[Applications]
·For polishing stainless steel and metal, removing rust and paint, woodworking, deburring inside pipes, and polishing corners and bottoms.- Volume Discount
Standard Price: MYR 63.33 Days to Ship: 9 Day(s) -
BS Nejitaru Delight Wheel (Hexagonal Shaft)
ICHIGUCHI
[Features]
· Abrasive grains are embedded in the special fibers to enable simple glazing.
[Applications]
· For polishing stainless steel and metal, cleaning, and woodwork.- Volume Discount
Standard Price: MYR 52.11- Days to Ship: 9 Day(s) or more -
BS Nejitaru Delight U-Shaped Wheel (Hexagonal Shaft)
ICHIGUCHI
[Features]
· Abrasive grains are embedded in the special fibers to enable simple glazing.
[Applications]
· For polishing stainless steel and metal, cleaning, woodwork, and polishing the insides of pipes, corners, and bottom surfaces.- Volume Discount
Standard Price: MYR 68.58- Days to Ship: 9 Day(s) or more -
BS Nejitaru Scolight U-Shaped Wheel (Hexagonal Shaft)
ICHIGUCHI
[Features]
· The power of the fiber results in mild work with no jams.
· Material is highly resistant to shaving.
[Applications]
· For polishing stainless steel and metal, removing dirt, and polishing woodwork, the insides of pipes, corners, and bottom surfaces.Standard Price: MYR 62.61- Days to Ship: 8 Day(s) -
BS Nejitaru Felt Wheel (Hexagonal Shaft)
ICHIGUCHI
[Features]
· Gently apply to the target object.
· Apply white bar / blue bar coating to give metal a mirror polish.
· Uses Japan-made felt and shafts.
[Applications]
· For polishing stainless steel, aluminum, brass, and metal, and for glass.Standard Price: MYR 42.68- Days to Ship: 8 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Material |
| Type |
| Application |
| Particle Size(#) |
| Outer Diameter(mm) |
| Shaft Diameter(mm) |
| Width(mm) |
| Screw Hole Diameter(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI |
| Product Series | ||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) or more | 9 Day(s) or more | 8 Day(s) | 8 Day(s) |
| Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Flap with shaft | Paper | Flap with shaft | Band | Flap with shaft | Flap with shaft | Band | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Paper | Flap with shaft | Flap with shaft | Band | Band | Flap with shaft | Flap with shaft | Flap with shaft | Drum | Band | Band | Band | - | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft |
| Application | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing |
| Particle Size(#) | 40 ～ 600 | 60 ～ 120 | 180 ～ 400 | - | 60 ～ 400 | 60 ～ 1000 | 40 ～ 600 | 60 ～ 600 | 60 ～ 400 | 60 ～ 400 | 80 ～ 600 | 100 ～ 240 | 60 ～ 1000 | 60 ～ 600 | 400 | 200 ～ 1000 | 200 ～ 400 | 800 ～ 3000 | 60 ～ 400 | - | 60 ～ 120 | 40 ～ 80 | 100 ～ 240 | 150 ～ 240 | 60 ～ 120 | 60 ～ 120 | 400 ～ 1000 | 400 ～ 1000 | 180 ～ 320 | - |
| Outer Diameter(mm) | 25 ～ 100 | - | 15 ～ 50 | 3 ～ 75 | 30 ～ 100 | 10 ～ 30 | - | 30 ～ 60 | 30 ～ 100 | 10 ～ 80 | 40 ～ 50 | - | 30 ～ 100 | 10 ～ 25 | - | - | 10 ～ 20 | 15 ～ 30 | - | 8 ～ 12 | - | - | 20 ～ 45 | - | 30 ～ 50 | 50 | 30 ～ 50 | 50 | 50 | 30 ～ 50 |
| Shaft Diameter(mm) | 3 ～ 6 | - | 6 | 3 ～ 6 | 6 | 3 | - | 6 | 6 | 3 ～ 6 | 6 | - | 6 | 3 | - | - | 3 | 3 | - | 6 | - | - | - | 10 | 6.3 | 6.3 | 6.3 | 6.3 | 6.3 | 6.3 |
| Width(mm) | 5 ～ 30 | 40 ～ 50 | 10 ～ 20 | 10 ～ 30 | 25 | - | 10 ～ 30 | 25 ～ 40 | 25 | - | 25 | 40 ～ 60 | 25 | 5 ～ 20 | 10 | 10 ～ 20 | 10 | 10 | 20 | 20 | 25 ～ 30 | 25 ～ 30 | 25 ～ 30 | 150 | 25 | 40 | 25 | 40 | 40 | 25 |
| Screw Hole Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Material
- Cotton
- Sisal
- Flannel
- Buff
- Felt
-
Type
- Flap with shaft
- Band
- Drum
- Paper
- Holder
- Holder (Drum)
-
Application
- Polishing
- Polishing
-
Particle Size(#)
-
Outer Diameter(mm)
-
Shaft Diameter(mm)
-
Width(mm)
-
Screw Hole Diameter(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (5)
- ICHIGUCHI (30)
- NAKANISHI (28)
- TRUSCO NAKAYAMA (23)
- YANASE (21)
- MINITOR (8)
- NIHONNSEIMITU (6)
- KURODA BRUSH (4)
- MURAKO (4)
- OFFICE MINE (3)
- SUNPOWER (2)
- DREMEL (1)
- NEW_REGISTON (1)
- SUMFLEX (1)
- UHT (1)
- PROZONE (0)
- PFERD (0)
CAD
-
- 2D
- 3D
Related Categories to Wheels with Shafts
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy