(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
HOZAN Screwdrivers（Grip Type：Resin）
| Days to Ship |
|
|---|
-
HOZAN
Driver for adjusting the ferrite core and pre-set knobs (with and without dial).
[Features]
· Material adopts polyacetal excellent in high insulation and wear resistance.
· It does not damage the core or cause misalignment.
· Tip size: 1.9 x 0.9, 1.95 / 2.0 / 2.6 / 2.65.- Volume Discount
Standard Price: MYR 10.00 Days to Ship: 9 Day(s) -
Ceramic Adjustable Screwdriver D-271/D-272/D-275
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.- Volume Discount
Standard Price: MYR 103.95- Days to Ship: 1 Day(s) or more -
Interchangeable Ceramic Adjustable Screwdriver D-281
HOZAN
A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
· Combination contents: D-281, Phillips No.0 (D-284), cross-shaped, blade width 1.7 mm (D-285).- Volume Discount
Standard Price: MYR 157.56 Days to Ship: 9 Day(s) -
HOZAN
Driver for adjusting the ferrite core and pre-set knobs (with and without dial).
[Features]
· Material adopts polyacetal excellent in high insulation and wear resistance.
· It does not damage the core or cause misalignment.
· Tip size: 2.3 X 0.4, 3.6 X 0.4 (with guide).- Volume Discount
Standard Price: MYR 15.53 Days to Ship: 9 Day(s) -
HOZAN
Driver for adjusting the ferrite core and pre-set knobs (with and without dial).
[Features]
· Material adopts polyacetal excellent in high insulation and wear resistance.
· It does not damage the core or cause misalignment.
· Tip size φ5.5 (I.D. 5.5 mm), φ8.0 (O.D. 8.0 mm).- Volume Discount
Standard Price: MYR 5.77 Days to Ship: 9 Day(s) -
HOZAN
Driver for adjusting the ferrite core and pre-set knobs (with and without dial).
[Features]
· Material adopts polyacetal excellent in high insulation and wear resistance.
· It does not damage the core or cause misalignment.
· D-16 set includes: D-16-1B/D-16-2B/D-16-3B/D-16-4B/D-16-5.
· Color D-16-1B to 4B Blue / D-16-5 White.
· Weight 45 g.- Volume Discount
Standard Price: MYR 29.10 Days to Ship: 9 Day(s) -
Interchangeable Ceramic Adjustable Screwdriver D-280
HOZAN
· A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Combination: D-280, -0.9 x -1.8 mm, blade thickness 0.4 mm (D-282), -1.3 x -2.6 mm, blade thickness 0.4 mm (D-283).- Volume Discount
Standard Price: MYR 283.05 Days to Ship: 9 Day(s) -
HOZAN
· Driver for adjusting the ferrite core and pre-set knobs (with and without dial).
[Features]
· Material adopts polyacetal excellent in high insulation and wear resistance.
· It does not damage the core or cause misalignment.
[Applications]
· Tip sizes: 1.35 x 0.7, 1.4 x 0.8, 1.4, 1.5, 2.6, 2.7.- Volume Discount
Standard Price: MYR 10.00 Days to Ship: 9 Day(s) -
HOZAN
Driver for adjusting the ferrite core and pre-set knobs (with and without dial).
[Features]
· Material adopts polyacetal excellent in high insulation and wear resistance.
· It does not damage the core or cause misalignment.
· Tip size: 2.65 X 1, 3.1 X 1.2, 2.65, 3.1, 3.18 and 3.35.- Volume Discount
Standard Price: MYR 15.35 Days to Ship: 8 Day(s) -
Ceramic Adjustment Screwdriver Set D-17 【3 Pieces Per Package】
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· With a sewn case that is resistant to friction and pulling.
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.- Volume Discount
Standard Price: MYR 297.39 Days to Ship: 9 Day(s) -
HOZAN
Adjustment driver that uses metal only at the tip to eliminate adjustment deviation.
[Features]
· Blade width: 2, blade thickness: 0.5, shaft length: 100 mm.
· Material: Stainless steel (tip), cellulose acetate (shaft).
[Applications]
· Can also be used for tip models (surface-mount device type).- Volume Discount
Standard Price: MYR 23.22 Days to Ship: 8 Day(s) -
HOZAN
A micro-sized screwdriver that's turned with fingertips, convenient for carrying, and can be stored anywhere.
[Features]
· Size that is easy to use even in narrow locations. For small screws that do not require force.
· The handle is designed at a length suitable for fingertip turning; while unsuitable for firmly tightened screws, it is effective for rapid turning.
· The tip size is No. 00, making it convenient for fine-tuning trims, trimmers, semi-fixed volume knobs, etc.
· The size and price allow placement where adjustment is necessary.
[Applications]
· Ideal for screws that are difficult to use with general drivers such as those for cameras and optical devices.
· For easily carrying glasses screws in the corners of pen cases, for regulation and for precision machines.
· Since its thin handle does not allow application of torque, it can be used securely for machine screws on instruments and fixtures which can break when too much strength is applied.- Volume Discount
Standard Price: MYR 9.83- Days to Ship: 8 Day(s) -
HOZAN
A convenient nut driver (box driver) handy for quick turning of nuts and bolts.
[Features]
· Shaft length is 100 mm and is also ideal for nuts in deep places where hands get in the way.
· Box depth is 18 mm for screws with a long shaft; the area where the screw protrudes from the nut can also be used.
· Black oxide processing forms an oxidation film during rustproofing treatment.
[Applications]
· Ideal for small nuts for hobby use.
· M2 screws which are ideal for the wheel nuts of electric four-wheel drive vehicles (no lock, 4 mm width across flats).- Volume Discount
Standard Price: MYR 33.11- Days to Ship: 1 Day(s) or more -
LED Electrical Screwdriver D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.- Volume Discount
Standard Price: MYR 42.66 Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN |
| Product Series | Ceramic Adjustment Screwdriver Set D-17 【3 Pieces Per Package】 | |||||||||||||
| Days to Ship | 9 Day(s) | 1 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 1 Day(s) or more | 5 Day(s) or more |
| Tip standards | Combination | Phillips (+) / Flathead (-) | Phillips (+) | Flathead (-) | Other | Combination | Flathead (-) | Combination | Combination | Phillips (+)/Flathead(-) | Flathead (-) | Phillips (+) / Flathead (-) | Box | Flathead (-) |
| Tip size / Phillips (+) | - | No.0 | No.0 | - | - | - | - | - | - | No.0 | - | No.00 | - | - |
| Tip size / flathead (-) blade width (mm) B1 | 1.9 | 1.3 ～ 1.8 | - | 2.3 ～ 3.6 | - | 1.35 ～ 3.6 | 0.9 ～ 2.6 | 1.35 ～ 1.4 | 2.65 ～ 3.1 | 1.3 ～ 1.8 | 2 | 1.8 | - | 2.5 |
| Shaft length L (mm) | - | 110 | - | - | - | - | - | - | - | 110 | 100 | 23 | 100 ～ 125 | 17 |
| Single Product/Set Classification | Single Item | Single Item | Set Product | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item |
| Shaft type | - | Round | Round | - | - | - | Round | - | - | Round | Round | Round | Round | Round |
| Magnet | - | NA | NA | - | - | - | NA | - | - | NA | NA | NA | NA | NA |
| Shaft through | - | NA | - | - | - | - | - | - | - | NA | NA | NA | NA | NA |
| Bolster | - | NA | - | - | - | - | - | - | - | NA | NA | NA | NA | NA |
| Grip Type | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin |
| Tip size / flathead (-) blade thickness (mm) B2 | 0.9 | 0.4 | - | 0.4 | - | 0.4 ～ 1.2 | 0.4 | 0.7 ～ 0.8 | 1 ～ 1.2 | 0.4 | 0.5 | 0.3 | - | 0.6 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | 1.95 ～ 2.65 | - | - | - | - | 1.95 ～ 3.35 | - | 2.6 ～ 2.7 | 2.65 ～ 3.35 | - | - | - | 4 ～ 10 | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.0, 1.2, 1.6
- 1.2
- 1.2、1.8、2.3
- 1.2、1.8、2.4、3.0
- 1.3
- 1.35
- 1.4
- 1.4, 2.0, 2.4
- 1.5
- 1.5, 2.0, 3.0
- 1.6
- 1.8
- 1.9
- 1.95
- 2
- 2.1
- 2.3
- 2.4
- 2.5
- 2.5、3.0、4.0
- 2.6
- 2.65
- 3
- 3, 5, 6
- 3.1
- 3.4
- 3.5
- 3.6
- 4
- 4 × 6
- 4.3
- 4.5
- 4.5, 5.5, 7.0
- 4.5、6.0
- 4.7
- 4.9
- 5
- 5.5
- 6
- 6.25
- 6.3
- 6.35
- 6.5
- 7
- 7, 9, 12
- 7.2
- 8
- 8, 9, 10, 12, 14
- 9
- 9, 11
- 9.5
- 10
- 11
- 12
- 13
- 14
- 16
- 18
- 30
- 100
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 80~150
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- VESSEL (56)
- PB SWISS TOOLS (45)
- ANEX (30)
- TONE (30)
- ENGINEER (28)
- KTC(KYOTO TOOL) (16)
- SK 11 (15)
- HOZAN (14)
- SUNFLAG (12)
- HIRAI KOGU (11)
- TRUSCO NAKAYAMA (9)
- E VALUE (5)
- SIGNET (5)
- EIGHT TOOL (4)
- HANDIWORK (4)
- HAZET (2)
- Ｍ＆Ｍ (2)
- TOP (2)
- WIHA (2)
- BESTTOOL (1)
- MITOLOY (1)
- SMATO (1)
- TRAD (1)
- TAKAGI (0)
- FUJIYA (0)
- HIOS (0)
- TGK (0)
- SUEKAGE TOOL (0)
- ARC GREATTOOL (0)
- BONDHUS (0)
- AS ONE (0)
- WILLIAMS (0)
- ARC (0)
- KO-KEN TOOL (0)
- WERA (0)
- ESCO (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Screwdrivers
- Pliers/Nippers/Pincers
- Tool Sets / Tool Boxes
- Screwdriver Bits
- Tweezers
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Tools Used at Electric Facilities
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy