(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
ANEX Screwdrivers（Grip Type：Resin）
| Days to Ship |
|
|---|
-
Superfit Precision Ball Point Screwdriver
ANEX
[Features]
· A high-strength type with an elastomer resin handle.
· A precision screwdriver with a long shaft.Standard Price: MYR 27.77- Days to Ship: 8 Day(s) -
Superfit Precision Box Screwdriver
ANEX
[Features]
· A high-strength type with an elastomer resin handle.Standard Price: MYR 28.51- Days to Ship: 8 Day(s) or more -
ANEX
[Features]
· This is a special precision screwdriver for screws that are used in mobile phones, computers, etc.
· The grip back part is a rotating cap.
· It has an excellent tough abrasion-resistant blade (quenched).Standard Price: MYR 34.82- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 34.88 Days to Ship: 5 Day(s) -
ANEX
[Features]
· Square cross-section shape that makes it easy to apply force
· Double-molded handle using elastomer resin that the hand can thoroughly get used toStandard Price: MYR 33.67- Days to Ship: 8 Day(s) or more -
Stubby Phosphorescent Screwdriver (Stubby Type / Magnetic)
ANEX
[Features]
· Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)
· Martensitic special stainless steel (high strength stainless steel (550)).Standard Price: MYR 30.85 Days to Ship: 9 Day(s) -
Split Handle Driver (Penetrating) 9210
ANEX
[Features]
·Suitable for removing spot welds, removing tiles, removing burrs, and chipping concrete.
·A wide grip end that prevents the hand from slipping when struck.
·Shock-resistant and oil-resistant resin handles are used.
·A convex washer that can be easily struck with a hammer.
·penetrating type.
·Magnets included.Standard Price: MYR 115.03- Days to Ship: 9 Day(s) -
Superfit Precision Hexalobular Screwdriver
ANEX
[Features]
· A high-strength type with an elastomer resin handle.Standard Price: MYR 28.51 Days to Ship: 8 Day(s) or more -
ANEX
[Features]
· A long shaft type.
· Comes with rotating cap.
· Acetate Resin HandleStandard Price: MYR 21.82- Days to Ship: 8 Day(s) -
Superfit Double-Ended Precision Replacement Screwdriver Set
ANEX
[Features]
· A high-strength type with an elastomer resin handle.Standard Price: MYR 91.47 Days to Ship: 8 Day(s) -
Superfit Double-Ended Precision Replacement Hexalobular Screwdriver Set
ANEX
[Features]
· A high-strength type with an elastomer resin handle.Standard Price: MYR 99.36 Days to Ship: 9 Day(s) -
Pencil Type Inspection Screwdriver
ANEX
[Features]
· It allows the presence of voltage to be checked in general households and factories.
· It indicates conductivity with a buzzer and LED lamp.Standard Price: MYR 69.40 Days to Ship: 8 Day(s) -
Pencil Type LED Electric Test Auto Tester (with Cord)
ANEX
[Features]
●Adopted a long life LED, that can easily test the presence of car voltage.
●With large alligator clip.
●Does not affect electronic elements, so it is optimal for vehicle equipped with electronic circuit equipment.
[Specification]
●AC Voltage (V) :-
●DC Voltage (V):6 to 36
●SPQ (piece) :6
●Tip: Needle Type
●Energizing Check, DC Polarity DeterminationStandard Price: MYR 81.85 Days to Ship: 9 Day(s) -
Spark Testing Screwdriver (Pencil Type with LED)
ANEX
[Features]
·You can easily check whether the power supply (AC) in general households and factories is energized.
·Wiring continuity can be checked.
·An LED lamp will let you know.
·It has a bright LED lamp.
·A continuity test is also possible.Standard Price: MYR 43.86 Days to Ship: 9 Day(s) -
"Mag Driver 22" Screwdriver (Magnetic)【1-5 Pieces Per Package】
ANEX
[Features]
· With a total length of 22 mm, even narrower spaces can be supported.
· Easy removal and refitting of bit.Standard Price: MYR 20.21- Days to Ship: 8 Day(s) -
ANEX
[Features]
・ Amazing number of gears 60
・ It rotates smoothly and has excellent workability
・ Stubby type that is convenient for narrow spaces
・ Ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle
・ It uses a strong elastomer resin handle for applying force easily
[Applications]
・ For tightening screws in narrow spacesStandard Price: MYR 75.85 Days to Ship: 9 Day(s) -
Ultra-Stubby Mini Switchable Screwdriver
ANEX
Features
• Convenient for narrow space.
Specification
• Total Length（mm）:33
• SPQ（piece）:12
• Bit Replacement Type
• Blade Edge: u 6, y No.2 Replacement BitStandard Price: MYR 23.92 Days to Ship: 9 Day(s) -
ANEX
[Features]
· Wide (large) handle that makes it easy to apply force. (Handle diameter 40 mm)
· Ultra-short stubby screwdriver, which can get into even narrow spaces.
· An ultra-short tool bit is used.
[Applications]
· Work in narrow spaces.Standard Price: MYR 38.83 Days to Ship: 8 Day(s) -
ANEX
[Features]
·Suitable for removing screws that require force.
·A single screwdriver can be used in two different ways: straight and T-shaped.
·You can easily switch from a T shape to a straight shape (or vice versa) with a single touch.
·T shape: For initial loosening and retightening that requires force.
·Straight type: For normal screwdrivers (fast turning).
·Bit replacement formula.
·With magnet (bit).
・ With storage case.Standard Price: MYR 268.20 Days to Ship: 9 Day(s) -
Standard Price: MYR 50.42 Days to Ship: 9 Day(s) -
Ratchet driver with flexible shaft
ANEX
[Features]
· Ideal for fastening screws on corners and edges.Standard Price: MYR 113.63 Days to Ship: 9 Day(s) -
Replacement Screwdriver (Incorporating Magnet)
ANEX
Comes with a bolster which can be tightened or loosened with a wrench. An electric screwdriver bit (subtense 6.35 mm hex shaft) can be used. The Phillips part of the bit has double spikes (AAC) securely holding screws. The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.
Standard Price: MYR 72.53 Days to Ship: 8 Day(s) -
Standard Price: MYR 57.91 Days to Ship: 8 Day(s) -
Compact ratchet 52 (straight type) set
ANEX
[Features]
·It is ultra-thin with a head width of 20 mm.
·For screwdrivers in narrow spaces.
·Smooth work with 52 fine gears.
·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.
·Uses ultra-short bits.Standard Price: MYR 333.19 Days to Ship: 9 Day(s) -
"Compact Ratchet 52" (Head-up Type)
ANEX
20 mm head width ultra-thin type. Easy to turn screws even in tight spaces with 52 gear fine feed angle. Uses an ultra-short tool bit (total length of 19 mm).
Standard Price: MYR 68.29 Days to Ship: 9 Day(s) -
Standard Price: MYR 8.71- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 9.83 Days to Ship: 8 Day(s) -
Standard Price: MYR 43.09 Days to Ship: 16 Day(s) or more -
Replacement Stubby Ratchet Screwdriver【695 Pieces Per Package】
ANEX
[Features]
· Rotates smoothly, with excellent workability.Standard Price: MYR 76.48 Days to Ship: 12 Day(s) -
Standard Price: MYR 16.08 Days to Ship: 8 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX |
| Product Series | Superfit Double-Ended Precision Replacement Hexalobular Screwdriver Set | "Mag Driver 22" Screwdriver (Magnetic)【1-5 Pieces Per Package】 | Replacement Stubby Ratchet Screwdriver【695 Pieces Per Package】 | |||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 5 Day(s) or more | 8 Day(s) | 16 Day(s) or more | 12 Day(s) | 8 Day(s) |
| Tip standards | Ballpoint | Box | Torx / Other | Box | Box | Phillips (+) / Flathead (-) | Flathead (-) | Torx | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Torx | Flathead (-) | Other | Flathead (-) | Phillips (+) / Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) | Combination | Phillips (+) | Phillips (+) | Flathead (-) | Phillips (+) | Phillips (+)/Flathead(-) | Other |
| Tip size / Phillips (+) | - | - | - | - | - | No.2 | - | - | No.00 / No.0 | No.000 / No.00 / No.0 / No.1 | - | - | - | - | No.1 / No.2 / No.3 | No.2 | No.2 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | No.2 | No.1 / No.2 / No.3 | No.2 | No.2 | No.1 / No.2 / No.3 | No.2 | No.0 | - | No.2 | No.2 | - |
| Tip size / flathead (-) blade width (mm) B1 | - | - | - | - | - | 6 | 9.5 ～ 11 | - | 1.8 ～ 3 | 1.8 ～ 3 | - | - | - | - | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | - | 6 | - | - | 2.5 | - | 30 | - |
| Shaft length L (mm) | 75 | 40 | 20 | 75 | 75 | 35 | 150 ～ 200 | 30 | 50 ～ 75 | - | - | - | - | - | 9 | - | - | - | - | - | - | 135 | - | - | - | 50 ～ 100 | 100 | 300 | - | 150 |
| Single Product/Set Classification | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item / Set Product | Single Item | Single Item | Set Product | Set Product | Single Item | Set Product | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item |
| Shaft type | Square | Round | Round | Square | - | Round | Round | Round | Round | Square | Square | Round | - | Round | - | Round | Round | Round | Square | Round | Round | Round | - | - | - | Round | Round | Round | Round | Round |
| Magnet | NA | NA | NA | NA | - | Available | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | Available | NA | NA |
| Shaft through | NA | NA | NA | NA | - | NA | Available | NA | NA | - | - | NA | NA | NA | - | - | - | - | - | - | - | - | - | - | - | NA | NA | NA | NA | NA |
| Bolster | NA | NA | NA | Included | - | NA | NA | NA | NA | - | - | NA | NA | NA | - | - | - | - | - | - | - | Included | - | - | - | NA | NA | NA | NA | NA |
| Grip Type | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.4 | - | 6 | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | 1.5 ～ 3 | 2 ～ 4.5 | - | 4 ～ 4.5 | 4 ～ 4.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | 4 ～ 6 | - | - | - | - | 2.5 ～ 6 | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.0, 1.2, 1.6
- 1.2
- 1.2、1.8、2.3
- 1.2、1.8、2.4、3.0
- 1.3
- 1.35
- 1.4
- 1.4, 2.0, 2.4
- 1.5
- 1.5, 2.0, 3.0
- 1.6
- 1.8
- 1.9
- 1.95
- 2
- 2.1
- 2.3
- 2.4
- 2.5
- 2.5、3.0、4.0
- 2.6
- 2.65
- 3
- 3, 5, 6
- 3.1
- 3.4
- 3.5
- 3.6
- 4
- 4 × 6
- 4.3
- 4.5
- 4.5, 5.5, 7.0
- 4.5、6.0
- 4.7
- 4.9
- 5
- 5.5
- 6
- 6.25
- 6.3
- 6.35
- 6.5
- 7
- 7, 9, 12
- 7.2
- 8
- 8, 9, 10, 12, 14
- 9
- 9, 11
- 9.5
- 10
- 11
- 12
- 13
- 14
- 16
- 18
- 30
- 100
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 80~150
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- VESSEL (56)
- PB SWISS TOOLS (45)
- ANEX (30)
- TONE (30)
- ENGINEER (28)
- KTC(KYOTO TOOL) (16)
- SK 11 (15)
- HOZAN (14)
- SUNFLAG (12)
- HIRAI KOGU (11)
- TRUSCO NAKAYAMA (9)
- E VALUE (5)
- SIGNET (5)
- EIGHT TOOL (4)
- HANDIWORK (4)
- HAZET (2)
- Ｍ＆Ｍ (2)
- TOP (2)
- WIHA (2)
- BESTTOOL (1)
- MITOLOY (1)
- SMATO (1)
- TRAD (1)
- TAKAGI (0)
- FUJIYA (0)
- HIOS (0)
- TGK (0)
- SUEKAGE TOOL (0)
- ARC GREATTOOL (0)
- BONDHUS (0)
- AS ONE (0)
- WILLIAMS (0)
- ARC (0)
- KO-KEN TOOL (0)
- WERA (0)
- ESCO (0)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy