(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Screwdriver Bits（Whether there is a double-end function：NA Page2）
| Days to Ship |
|
|---|
-
TRUSCO NAKAYAMA
Original special alloy is used to deliver excellent durability. It has been manufactured with strict dimensional accuracy according to the JIS standard and JCIS standard, achieving outstanding fitting with screws.
Standard Price: MYR 16.99- Days to Ship: 9 Day(s) -
Water Faucet Screwdriver Bit (AHF-1515)
ANEX
[Features]
· Suitable for wide slotted screws such as flow check valves.Standard Price: MYR 53.90 Days to Ship: 8 Day(s) -
WERA
[Features]
· A robust bit that's ideal for machining iron and metal plates.- Volume Discount
Standard Price: MYR 32.75- Days to Ship: 8 Day(s) or more -
Bit for B3 (H6.35 mm) Torx T Type Power Tool
NAGAHORIKOGYO
[Features]
· Good torque transmission efficiency, official licensed company.
· Uses a special steel with high durability at a reasonable cost.- Volume Discount
Standard Price: MYR 47.02- Days to Ship: 8 Day(s) or more -
Screwdriver Socket & Bit, B-10, Allen Bit
NAGAHORIKOGYO
[Features]
· For tightening hex bolts and hex socket set screws, etc., with electric screwdrivers, etc.
· Uses a special bit material with high durability at a reasonable cost.- Volume Discount
Standard Price: MYR 15.09- Days to Ship: 11 Day(s) or more -
HOZAN
A replacement ceramic adjustment driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
· Alumina ceramic: Fine ceramic material. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Flathead 0.9 x flathead 1.8 mm, blade thickness 0.4 mm (D-282).
· Flathead 1.3 x flathead 2.6 mm, blade thickness 0.4 mm (D-283).
· Phillips No. 0 (D-284).
· Cross shape, blade width 1.7 mm (D-285).- Volume Discount
Standard Price: MYR 84.53- Days to Ship: 8 Day(s) -
No, BPH Interchangeable Shaft for Torque Screwdriver (Cross-Head)
VESSEL
Replacement screwdriver bit for torque screwdrivers.
[Features]
· Replacement shaft for Phillips screws.
· Ideal for tightening management of various terminal blocks.
[Applications]
· Replacement shaft for torque screwdriver.- Volume Discount
Standard Price: MYR 25.40 Days to Ship: 8 Day(s) -
Precision Bit for HIOS, No. D73, Cross-Head Tip, Fine Shaft Diameter 1.2 to 3.0
VESSEL
Precision bit - Phillips.
[Features]
· φ4 (Shaft diameter 4 mm).
· High precision screwdriver bit that enables screw fastening work in compact/high-precision fields.
· High-precision finish blade tip that conforms to the screw standards.
[Applications]
· Applicable to screw-tightening work in small precision fields such as hard disks, OA devices, audio equipment, VTR, optical equipment, etc.- Volume Discount
Standard Price: MYR 8.73- Days to Ship: 5 Day(s) or more -
Precision Bit No. D76 for HIOS, Shaft Width Across Flats 3.0 to 4.0【1-10 Pieces Per Package】
VESSEL
Precision bit - hex.
[Features]
· φ5 (Shaft diameter 5 mm).
· High precision screwdriver bit that enables screw fastening work in compact/high-precision fields.
· High-precision finish blade tip that conforms to the screw standards.
[Applications]
· Applicable to screw-tightening work in small precision fields such as hard disks, OA devices, audio equipment, VTR, optical equipment, etc.Standard Price: MYR 21.81- Days to Ship: 9 Day(s) or more -
Precision Bit for DELVO No. D71 Cross-Head Shaft Diameter 1.5 to 3.0【1-10 Pieces Per Package】
VESSEL
Precision bit - Phillips.
[Features]
· φ4 (Shaft diameter 4 mm).
· High precision screwdriver bit that enables screw fastening work in compact/high-precision fields.
· Socket with half-moon cross section.
· High-precision finish blade tip that conforms to the screw standards.
[Applications]
· Applicable to screw-tightening work in small precision fields such as hard disks, OA devices, audio equipment, VTR, optical equipment, etc.- Volume Discount
Standard Price: MYR 11.14- Days to Ship: 8 Day(s) or more -
Precision Bit, for DELVO, No. D71, Cross-Head Shaft Diameter 4.0
VESSEL
Precision bit - Phillips.
[Features]
· φ4 (Shaft diameter 4 mm)
· High precision bit that enables screw fastening work in compact/high-precision fields.
· Socket with half-moon cross section.
· High-precision finish blade tip that conforms to the screw standards.
[Applications]
· Applicable to Torx screw-tightening work in small precision fields such as hard disks, OA devices, audio equipment, VTR, optical equipment, etc.- Volume Discount
Standard Price: MYR 11.57- Days to Ship: 8 Day(s) or more -
Recessed Bit (Magnetized) No. M-A16 Cross-Head Tip
VESSEL
Two stepped tool bits with magnets included. Fine shaft specification that can be inserted in narrow spaces.
[Features]
· Stepped type. Fine shaft bit that can be inserted in narrow places.
· High strength magnet built in.
[Applications]
· For light electrical equipment assembly, communication acoustic equipment assembly, building, and civil engineering work.- Volume Discount
Standard Price: MYR 15.58 Days to Ship: 9 Day(s) -
Replacement Shaft For Torque Screwdriver B06IP-15IP
VESSEL
Use attached to the handle of torque screwdrivers.
- Volume Discount
Standard Price: MYR 51.50- Days to Ship: 8 Day(s) -
![Precision Bit No. D71 Torx Bit (for DELVO [R])](//my.misumi-ec.com/linked/material/fs/VSL1/PHOTO/D71T844.jpg?$product_view_b$)
Precision Bit No. D71 Torx Bit (for DELVO [R])
VESSEL
Precision bit - Torx. Made by an official Torx licensed company.
[Features]
· φ4 (Shaft diameter 4 mm).
· High precision bit that enables screw fastening work in compact/high-precision fields.
· High-precision finish blade tip that conforms to the screw standards.
[Applications]
· Applicable to Torx screw-tightening work in small precision fields such as hard disks, OA devices, audio equipment, VTR, optical equipment, etc.- Volume Discount
Standard Price: MYR 41.10- Days to Ship: 8 Day(s) or more -
Precision Bit for HIOS No. D73 Straight-Slot Tip Fine Shaft Diameter 2 to 3 mm
VESSEL
Precision bit - flathead.
[Features]
· φ4 (Shaft diameter 4 mm).
· High precision bit that enables screw fastening work in compact/high-precision fields.
· High-precision finish blade tip that conforms to the screw standards.
[Applications]
· Applicable to Torx screw-tightening work in small precision fields such as hard disks, OA devices, audio equipment, VTR, optical equipment, etc.Standard Price: MYR 13.13- Days to Ship: 8 Day(s) or more -
Precision Bit, for HIOS, No. D76, Flat Shaft Diameter 5.0【10 Pieces Per Package】
VESSEL
Precision bit - flathead.
[Features]
· φ5 (Shaft diameter 5 mm.
· High precision bit that enables screw fastening work in compact/high-precision fields.
· High-precision finish blade tip that conforms to the screw standards.
[Applications]
· Applicable to Torx screw-tightening work in small precision fields such as hard disks, OA devices, audio equipment, VTR, optical equipment, etc.Standard Price: MYR 134.34 Days to Ship: 10 Day(s) or more -
Precision Bit, for DELVO, No. D71, Straight-Slot Shaft Diameter 2.5 to 3.0【1-10 Pieces Per Package】
VESSEL
High precision bits support screw tightening in compact and precision fields, such as computer and office automation equipment, sound equipment, VTR, and optical equipment.
Standard Price: MYR 14.50- Days to Ship: 8 Day(s) or more -
Precision Bit, for Delvo, D71 Opposite Side Shaft Diameter 4.0
VESSEL
High precision bits support screw tightening in compact and precision fields, such as computer and office automation equipment, sound equipment, VTR, and optical equipment.
Standard Price: MYR 25.94 Days to Ship: 9 Day(s) -
Interchangeable Shaft for Torque Screwdriver BTX
VESSEL
Use attached to the handle of torque screwdrivers.
- Volume Discount
Standard Price: MYR 41.21 Days to Ship: 8 Day(s) or more -
Interchangeable Shaft (Hex) for No. BHX Torque Screwdriver
VESSEL
Replacement shaft for Vessel torque screwdriver. For hex screws.
[Features]
· Replacement shaft for hex socket head bolts and set screws.
[Applications]
· For assembly of machinery and automatic equipment.- Volume Discount
Standard Price: MYR 24.85- Days to Ship: 8 Day(s) or more -
Precision Bit for Hios No. D73, Cross-Head, Shaft Diameter 4.0
VESSEL
High precision bits support screw tightening in compact and precision fields, such as computer and office automation equipment, sound equipment, VTR, and optical equipment.
- Volume Discount
Standard Price: MYR 86.38 Days to Ship: 8 Day(s) -
Precision Bit, for HIOS, D76 Opposite Side Shaft Diameter 5.0
VESSEL
High precision bits support screw tightening in compact and precision fields, such as computer and office automation equipment, sound equipment, VTR, and optical equipment.
Standard Price: MYR 21.91 Days to Ship: 9 Day(s) -
Precision Bit, for HIOS, D73 Opposite Side Shaft Diameter 4.0
VESSEL
High precision bits support screw tightening in compact and precision fields, such as computer and office automation equipment, sound equipment, VTR, and optical equipment.
Standard Price: MYR 20.94 Days to Ship: 9 Day(s) -
Precision Bit, for HIOS, No. D76, Flat Shaft Diameter 3.0–4.0
VESSEL
Precision bit - flathead - shaft diameter 5 mm.
[Features]
· High precision screwdriver bit that enables screw fastening work in compact/high-precision fields.
· High-precision finish blade tip that conforms to the screw standards.
[Applications]
· Applicable to Torx screw-tightening work in small precision fields such as hard disks, OA devices, audio equipment, VTR, optical equipment, etc.- Volume Discount
Standard Price: MYR 15.66- Days to Ship: 9 Day(s) or more -
Precision Bit, for Delvo, D71 Flat Shaft Diameter 4.0【10 Pieces Per Package】
VESSEL
High precision bits support screw tightening in compact and precision fields, such as computer and office automation equipment, sound equipment, VTR, and optical equipment.
Standard Price: MYR 127.72 Days to Ship: 10 Day(s) or more -
VESSEL
High precision bits support screw tightening in compact and precision fields, such as computer and office automation equipment, sound equipment, VTR, and optical equipment.
Standard Price: MYR 20.84- Days to Ship: 9 Day(s) or more -
Precision Bit, for HIOS, D73 Flat Shaft Diameter 4.0
VESSEL
High precision bits support screw tightening in compact and precision fields, such as computer and office automation equipment, sound equipment, VTR, and optical equipment.
Standard Price: MYR 13.60 Days to Ship: 8 Day(s) -
Precision Bit No. D76 Torx Bit (for HIOS)【1-10 Pieces Per Package】
VESSEL
φ5 (shaft diameter: 5 mm) precision Torx bit. Made by an official Torx licensed company.
[Features]
· High precision screwdriver bit that enables screw fastening work in compact/high-precision fields.
· High-precision finish blade tip that conforms to the screw standards.
· Compared to hexagonal heads, Torx offers high driving efficiency and smoothly and securely transfers torque while simultaneously eliminating cam-out.
[Applications]
· Applicable to Torx screw-tightening work in small precision fields such as hard disks, OA devices, audio equipment, VTR, optical equipment, etc.- Volume Discount
Standard Price: MYR 44.16- Days to Ship: 5 Day(s) or more -
Hex Bit Set for Machinery Assembly 【6 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Ideal for tightening screws such as hex socket screws (cap screws, set screws, etc.).
[Applications]
· Assembly of machinery, demolition work, maintenance of equipment, and work inside factories.Standard Price: MYR 73.54 Days to Ship: 9 Day(s) -
"Double-Grooved Bit" (Magnetic)【10 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Shaft is thin at 4.5 mm and ideal for fastening screws in deep places, on terminal blocks, or in fine spaces in home electronics.
· Original special alloy is used to boast superior precision and durability.
· It is a double groove type that can be used for electric tools with both 13 mm and 9.5 mm ball groove sizes.
[Applications]
· Ideal for narrow holes in home appliances, terminal blocks, and deep screw holes.
· Screw-tightening of door sash.Standard Price: MYR 79.01- Days to Ship: 8 Day(s) -
Screw Removal Bit, Overall Length: 12mm/13mm/16mm/65mm
TRUSCO NAKAYAMA
[Features]
· Phillips head screws with stripped heads can be removed.
· Supports (+) No.1 and (+) No.2 equivalent screws.
· Color coated for easy distinguishing.Standard Price: MYR 26.18- Days to Ship: 9 Day(s) -
Universal Socket Adapter for Electric Screwdriver
TRUSCO NAKAYAMA
[Features]
· Can be used across a wide range with a swing angle of 30°, making it ideal for working in corners or in narrow spaces with obstacles.
· With finger rest.
· For hexagon shank (6.35 mm) bits.
[Applications]
· Various bits can be fitted.Standard Price: MYR 150.19 Days to Ship: 8 Day(s) -
"Color Bit" (Stepped, Magnetic)【1-2 Pieces Per Package】
ANEX
[Features]
· For easily distinguishing tip sizes by color.
· Stepped type.
· Both ends are unpainted and cutting edge accuracy is outstanding.Standard Price: MYR 26.27- Days to Ship: 8 Day(s) or more -
Color Bit (Stepped, Magnetic, 10 Piece Set) 【10 Pieces Per Package】
ANEX
[Features]
· Stepped type.
· For easily distinguishing tip sizes by color.Standard Price: MYR 87.15- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 29.12- Days to Ship: 8 Day(s) -
Ryujin Bit (stepped/magnetic)【2-5 Pieces Per Package】
ANEX
[Features]
· The screw head is easy to see and ideal for work in narrow places.
· Absorbs impact in the torsion part.
· Has a rust-resistant glazed finish.Standard Price: MYR 30.72- Days to Ship: 8 Day(s) or more -
ANEX
Catch a stainless steel screw that does not have a magnet with a clip.
It comes with a neodymium magnet that can catch steel screws.Standard Price: MYR 60.37 Days to Ship: 9 Day(s) -
HIRAI KOGU
[Features]
· It is suitable for tightening hard screws and heavy work.
· This thickness of the slim part of the center does not easily break even during machining, and it further relaxes the impact and transmits the ideal torque. (PAT.)
· Long type (200 mm) torsion type bit.
· Slim tip specification. (Tip shaft diameter φ4.5)Standard Price: MYR 44.86 Days to Ship: 8 Day(s) -
HIRAI KOGU
[Features]
· Work can be done without dropping screws in deep, interior locations where a magnet is not effective. (PAT.)
· A bit for 6.35 mm compatible 14.4 V rechargeable impact screwdrivers.
· The diameter of the tip shaft is a slim ø4.3 mm type.
[Applications]
· Work can be done without dropping screws with which the magnet is ineffective.Standard Price: MYR 42.76 Days to Ship: 8 Day(s) -
Stepped Taper Slim Torsion Bit【2-10 Pieces Per Package】
SUNFLAG
[Features]
· Ideal for building related tasks, furniture assembling, vehicle maintenance, electric construction work, factory work, etc.
· The torsion machining absorbs impact and makes it hard to break.
· The screw head has a slim tip shape that is easy to see, and catches the screw groove reliably.- Volume Discount
Standard Price: MYR 33.12- Days to Ship: 8 Day(s) -
Standard Price: MYR 91.19 Days to Ship: 8 Day(s) -
SUNFLAG
[Features]
· Useful for fastening screws on walls, edges, and corners.
· Can use tool bits for commercially available rechargeable screwdrivers.
· Uses strong, high accuracy bearings.
[Applications]
· Used to fasten screws on walls, edges, and corners.Standard Price: MYR 362.11 Days to Ship: 8 Day(s) -
Bitorsion® Stainless Steel Screwdriver Bit
WERA
[Features]
· Stainless steel screwdriver bits.- Volume Discount
Standard Price: MYR 33.91- Days to Ship: 5 Day(s) or more -
Bitorsion Screwdriver Bit, Total Length: 25mm/ 50mm
WERA
[Features]
· The double-torsion action realizes a longer operation life.- Volume Discount
Standard Price: MYR 17.13- Days to Ship: 8 Day(s) or more -
Bitorsion® Diamond Coating Screwdriver Bits
WERA
[Features]
· A bit whose bite and lifespan are improved thanks to the diamond coating.- Volume Discount
Standard Price: MYR 35.18- Days to Ship: 8 Day(s) or more
![Precision Bit No. D71 Torx Bit (for DELVO [R])](http://my.misumi-ec.com/linked/material/fs/VSL1/PHOTO/D71T844.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip Type |
| shank diameter(mm) |
| Overall Length(mm) |
| Single Product Set Product |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) |
| Tip two-sided width size (mm) |
| Bit Quantity |
| Presence of magnet at the blade tip |
| Whether there is a double-end function |
| Tip size / flathead (-) blade thickness (mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TRUSCO NAKAYAMA | ANEX | WERA | NAGAHORIKOGYO | NAGAHORIKOGYO | HOZAN | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | ANEX | ANEX | ANEX | ANEX | ANEX | HIRAI KOGU | HIRAI KOGU | SUNFLAG | SUNFLAG | SUNFLAG | WERA | WERA | WERA |
| Product Series | No, BPH Interchangeable Shaft for Torque Screwdriver (Cross-Head) | Precision Bit for HIOS, No. D73, Cross-Head Tip, Fine Shaft Diameter 1.2 to 3.0 | Precision Bit No. D76 for HIOS, Shaft Width Across Flats 3.0 to 4.0【1-10 Pieces Per Package】 | Precision Bit for DELVO No. D71 Cross-Head Shaft Diameter 1.5 to 3.0【1-10 Pieces Per Package】 | Precision Bit, for DELVO, No. D71, Cross-Head Shaft Diameter 4.0 | Precision Bit for HIOS No. D73 Straight-Slot Tip Fine Shaft Diameter 2 to 3 mm | Precision Bit, for HIOS, No. D76, Flat Shaft Diameter 5.0【10 Pieces Per Package】 | Precision Bit, for DELVO, No. D71, Straight-Slot Shaft Diameter 2.5 to 3.0【1-10 Pieces Per Package】 | Precision Bit, for Delvo, D71 Opposite Side Shaft Diameter 4.0 | Precision Bit for Hios No. D73, Cross-Head, Shaft Diameter 4.0 | Precision Bit, for HIOS, D76 Opposite Side Shaft Diameter 5.0 | Precision Bit, for HIOS, D73 Opposite Side Shaft Diameter 4.0 | Precision Bit, for HIOS, No. D76, Flat Shaft Diameter 3.0–4.0 | Precision Bit, for Delvo, D71 Flat Shaft Diameter 4.0【10 Pieces Per Package】 | Precision Bit No. D76 Torx Bit (for HIOS)【1-10 Pieces Per Package】 | Color Bit (Stepped, Magnetic, 10 Piece Set) 【10 Pieces Per Package】 | |||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 11 Day(s) or more | 8 Day(s) | 8 Day(s) | 5 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 8 Day(s) | 5 Day(s) or more | 9 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 5 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more |
| Tip Type | Phillips (+) | Special Purpose | Torx Type (Hexalobular) | Torx Type (Hexalobular) | Hex Type | Phillips (+) / Flathead (-) | Phillips (+) | Phillips (+) | Hex Type | Phillips (+) | Phillips (+) | Phillips (+) | Torx Type (Hexalobular) | Torx Type (Hexalobular) | Flathead (-) | Flathead (-) | Flathead (-) | Hex Type | Torx Type (Hexalobular) | Hex Type | Phillips (+) | Hex Type | Hex Type | Flathead (-) | Flathead (-) | Hex Type | Flathead (-) | Torx Type (Hexalobular) | Hex Type | Phillips (+) | Special Purpose | Adapter | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Screw Catch | Phillips (+) | Screw Catch | Phillips (+) | Adapter | Adapter | Phillips (+) / Flathead (-) / Hex Type / Torx Type (Hexalobular) / Square Type (Square) | Phillips (+) / Flathead (-) / Torx Type (Hexalobular) / Square Type (Square) | Phillips (+) / Flathead (-) / Torx Type (Hexalobular) |
| shank diameter(mm) | 6.35 | - | 6.35 ～ 6.38 | 6.35 | 5 | - | 6.35 | 4 | 5 | 4 | 4 | 6.35 | 6.35 | 4 | 4 | 5 | 4 | 4 | 6.35 | 6.35 | 4 | 5 | 4 | 5 | 4 | 4 | 4 | 5 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | - | 6.35 | 6.35 | 6.35 | - | 6.35 | 6.35 | 6.35 | 6.35 |
| Overall Length(mm) | 65 ～ 150 | 150 | 50 ～ 70 | 50 ～ 200 | 70 ～ 100 | 56 ～ 71 | 170 | 40 ～ 60 | 70 | 44 ～ 64 | 44 ～ 64 | 100 | 30 | 44 | 40 | 60 | 44 | 44 | 30 ～ 34 | 29.5 ～ 36 | 40 | 70 | 60 | 60 | 44 | 44 | 40 | 60 | 65 | 65 ～ 150 | 12 ～ 65 | 94 | 65 ～ 300 | 65 ～ 150 | 65 ～ 100 | 65 ～ 120 | 65 | 200 | 115 | 65 ～ 100 | 80 | 168 | 25 ～ 89 | 25 ～ 50 | 25 ～ 50 |
| Single Product Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item / Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item |
| Tip size / Phillips (+) | No.2 | - | - | - | - | No.0 / Other | No.3 | No.00 / No.0 / No.1 | - | No.00 / No.0 / No.1 | No.1 / No.2 | No.2 | - | - | - | - | - | - | - | - | No.2 | - | - | - | - | - | - | - | - | No.2 | - | - | No.0 / No.1 / No.2 | No.1 / No.2 | No.00 | No.2 | - | No.2 | No.2 | No.2 | - | - | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 |
| Tip size / flathead (-) blade width (mm) | - | - | - | - | - | 0.9 ～ 2.6 | - | - | - | - | - | - | - | - | 2 ～ 3 | 5 | 2 ～ 3 | - | - | - | - | - | - | 3 ～ 4 | 4 | - | 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5.5 | 5.5 ～ 6.5 | 5.5 ～ 6.5 |
| Tip two-sided width size (mm) | - | - | - | - | 1.5 ～ 5 | - | - | - | 2 ～ 3 | - | - | - | - | - | - | - | - | 3 | - | 1.5 ～ 5 | - | 4 | 3 | - | - | 2 ～ 2.5 | - | - | 2 ～ 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 ～ 6 | - | - |
| Bit Quantity | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 6 | - | - | - | - | - | 2 | - | - | - | - | - | - | - | - | - | - |
| Presence of magnet at the blade tip | Available / NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available | NA | NA | Available | Available | NA | Available | NA | NA | NA | NA | Available | Available | NA | NA | NA |
| Whether there is a double-end function | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Tip size / flathead (-) blade thickness (mm) | - | - | - | - | - | 0.4 | - | - | - | - | - | - | - | - | 0.3 ～ 0.4 | 0.7 | 0.3 ～ 0.4 | - | - | - | - | - | - | 0.4 ～ 0.6 | 0.5 | - | 0.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 | 0.8 ～ 1.2 | 0.8 ～ 1.2 |
![Precision Bit No. D71 Torx Bit (for DELVO [R])](http://my.misumi-ec.com/linked/material/fs/VSL1/PHOTO/D71T844.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Tip Type
- Phillips (+)
- Flathead (-)
- Hex Type
- Torx Type (Hexalobular)
- Ball Point Type
- Square Type (Square)
- Box Type
- Special Purpose
- Screw Catch
- Adapter
- Combination
- Other
-
shank diameter(mm)
-
Overall Length(mm)
- 10
- 12
- 13
- 15
- 16
- 18
- 19
- 20
- 20.5
- 22.5
- 23
- 24
- 25
- 25.4
- 26
- 27
- 28
- 29
- 29.5
- 30
- 32
- 33
- 33.3
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 44
- 45
- 48
- 50
- 52
- 54
- 55
- 56
- 57
- 59
- 60
- 63
- 64
- 65
- 65、85、110
- 65/110
- 65/110/100
- 66
- 70
- 71
- 74
- 75
- 77
- 80
- 82
- 85
- 89
- 90
- Mini ratchet: 93; bit: 25
- 94
- 95
- 100
- 105
- 108
- 110
- 115
- 120
- 122
- 125
- 130
- 135
- 140
- 150
- 152
- 168
- 170
- 200
- 205
- 210
- 250
- 300
- 350
- 450
- 500
-
Single Product Set Product
- Single Item
- Set Product
-
Tip size / Phillips (+)
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm)
-
Tip two-sided width size (mm)
-
Bit Quantity
-
Presence of magnet at the blade tip
- Available
- NA
-
Whether there is a double-end function
- Available
- NA
-
Tip size / flathead (-) blade thickness (mm)
Narrow search by specifying Manufacturer
-
- VESSEL (72)
- PB SWISS TOOLS (41)
- KO-KEN TOOL (29)
- ANEX (25)
- WERA (23)
- NAGAHORIKOGYO (17)
- WIHA (11)
- TRUSCO NAKAYAMA (7)
- SUNFLAG (6)
- SK 11 (5)
- TONE (4)
- BESTTOOL (3)
- OMISEIKI (3)
- TOP (3)
- E VALUE (2)
- HIRAI KOGU (2)
- KTC(KYOTO TOOL) (2)
- EIGHT TOOL (1)
- EARTH MAN (1)
- HOZAN (1)
- SIGNET (1)
- TRAD (1)
- TOHNICHI MFG (1)
- ARC GREATTOOL (0)
- SANDVIK (0)
- SMATO (0)
- ATI (0)
- ESCO (0)
- HIOS (0)
- NAKAMURASEISAKU (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdriver Bits
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy