(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Screwdrivers（Shaft type：Round Page7）
| Days to Ship |
|
|---|
-
ENGINEER
Wireless microphone jack and connectors can be attached and detached easily.
- Volume Discount
Standard Price: MYR 20.87- Days to Ship: 8 Day(s) -
Standard Price: MYR 20.87 Days to Ship: 8 Day(s) -
Ceramic Adjustment Screwdriver DA-48 – 52
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties.
· Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment. (Tip: +/- Bit, Shaft: Hex)
· Pencil-type portable design with caps for protecting tip.
[Applications]
· For audio equipment such as tuners and amplifiers, TVs, video cameras, and radio related equipment.
· For work related to wireless devices, computers and communications.- Volume Discount
Standard Price: MYR 121.07- Days to Ship: 8 Day(s) or more -
Ceramic Adjustment Screwdriver, Detachable DA-72 – 79
ENGINEER
Thin-shaft ceramic adjustment screwdriver that's ideal for trimmer adjustment of deep areas.
[Features]
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
· Since the shaft portion and the handle can be detached, it is also possible to use it mounted on machines, etc.
[Applications]
· This fine shaft type is ideal for adjustment of chassis parts and other deep areas.- Volume Discount
Standard Price: MYR 85.03- Days to Ship: 9 Day(s) -
ENGINEER
A mini soft screwdriver set with a soft grip which fits well in the hand.
[Features]
· It is a soft grip which fits well in the hand.
· The shaft is made of a special alloy steel used in the manufacturing industry, and has been hardened over the whole length.
· The tip has been black-point processed.
· It has a chrome plated finish.
[Applications]
· For tightening and removing various screws.- Volume Discount
Standard Price: MYR 113.28 Days to Ship: 8 Day(s) -
Replacement Screwdriver Set DK-50
ENGINEER
+/- 2-WAY bit for 2-in-1 interchangeable screwdriver set.
[Features]
· +/- 2-WAY 2-in-1 bit.
· 3-piece interchangeable screwdriver set.
[Applications]
· For tightening and removing various screws.- Volume Discount
Standard Price: MYR 69.30 Days to Ship: 9 Day(s) -
Screwdriver for Precision Special Screws DAP-01/DAP-02
ENGINEER
A compact design screwdriver for precision special screws.
[Features]
· The grip part has a rotating cap.
· Uses anti-slip knurling.
· DAP-01: For adjustment work of star-shaped screws (pentalobular screws).
· DAP-01: For smartphone strap attachment and repair.
[Applications]
· DAP-01: Ideal for accessory replacement of smartphones.
· DAT-02: Ideal for repair and maintenance of portable game machines.- Volume Discount
Standard Price: MYR 69.64 Days to Ship: 9 Day(s) -
Screwdriver For Special Screw and For Hexalobular Screw
ENGINEER
A screwdriver that supports all types of special screw for mobile phones, PHS, radio sets, PC, home game machines, etc.
[Features]
· There is a protrusion at the center of the screw hole, making it suitable for tampering and theft prevention.
· It is widely used in cordless telephones / radios / precision instruments, etc.
[Applications]
· For the maintenance of mobile phones, PHS, radio sets, PC, home game machines, etc.- Volume Discount
Standard Price: MYR 48.94- Days to Ship: 9 Day(s) -
Screwdriver for Special Screw and for Line Recess Screw (for LR Screw)
ENGINEER
It supports special screws used in mobile phones, etc.
- Volume Discount
Standard Price: MYR 67.61 Days to Ship: 9 Day(s) -
ENGINEER
Screwdriver bit series special screw bit set that supports various special screws.
[Features]
· 10-piece set of DR-81 to 93.
· With bit holder.
[Applications]
· For all types of maintenance of mobile phones, PHS, radio sets, PC, home game machines, etc.- Volume Discount
Standard Price: MYR 356.00 Days to Ship: 9 Day(s) -
TONE
Standard type screwdriver with a wooden handle.
[Features]
· Standard type screwdriver with a wooden handle with a sense of warmth.
· Through screwdriver.
[Applications]
· Ideal for a wide range of maintenance work, such as maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment.- Volume Discount
Standard Price: MYR 32.27- Days to Ship: 9 Day(s) -
TONE
An ideal screwdriver for working in places that conventional screwdrivers cannot reach.
[Features]
· Long shaft screwdriver with a total length of 395 mm.
· Round shaft type with 267 mm shaft length. With magnet.
· Flathead tip -0.8 x 6.0 mm.
· Phillips tip +No.2 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.- Volume Discount
Standard Price: MYR 69.48 Days to Ship: 9 Day(s) or more -
Long Shaft Screwdriver Set LD2
TONE
2-piece long shaft screwdriver set with an overall length of 395 mm.
[Features]
· For work which can't be reached using a conventional driver.
· Length: 395 mm, shaft length: 267 mm. Round shaft type with magnet.
· Flathead tip -0.8 x 6.0.
· Phillips tip +No.2.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.- Volume Discount
Standard Price: MYR 115.69 Days to Ship: 9 Day(s) -
HOZAN
A micro-sized screwdriver that's turned with fingertips, convenient for carrying, and can be stored anywhere.
[Features]
· Size that is easy to use even in narrow locations. For small screws that do not require force.
· The handle is designed at a length suitable for fingertip turning; while unsuitable for firmly tightened screws, it is effective for rapid turning.
· The tip size is No. 00, making it convenient for fine-tuning trims, trimmers, semi-fixed volume knobs, etc.
· The size and price allow placement where adjustment is necessary.
[Applications]
· Ideal for screws that are difficult to use with general drivers such as those for cameras and optical devices.
· For easily carrying glasses screws in the corners of pen cases, for regulation and for precision machines.
· Since its thin handle does not allow application of torque, it can be used securely for machine screws on instruments and fixtures which can break when too much strength is applied.- Volume Discount
Standard Price: MYR 9.83- Days to Ship: 8 Day(s) -
HOZAN
Screwdriver to be used for screws in narrow spaces.
[Features]
· Convenient for screws that are located in narrow places where ordinary screwdrivers cannot enter.
· Compact design that allows work in narrow locations.
· Handle shape that transfers force.
· A spherical handle allows the screwdriver to be easily pressed against the screw by grasping the handle in the palm.
[Applications]
· The short overall length of 83 mm allows easy handling in narrow spaces. Exhibits great effect in narrow spaces.- Volume Discount
Standard Price: MYR 32.86 Days to Ship: 9 Day(s) -
HOZAN
A convenient nut driver (box driver) handy for quick turning of nuts and bolts.
[Features]
· Shaft length is 100 mm and is also ideal for nuts in deep places where hands get in the way.
· Box depth is 18 mm for screws with a long shaft; the area where the screw protrudes from the nut can also be used.
· Black oxide processing forms an oxidation film during rustproofing treatment.
[Applications]
· Ideal for small nuts for hobby use.
· M2 screws which are ideal for the wheel nuts of electric four-wheel drive vehicles (no lock, 4 mm width across flats).- Volume Discount
Standard Price: MYR 33.11- Days to Ship: 1 Day(s) or more -
Screwdriver with Anti-Drop Ring
ANEX
The cord does not tangle, even when the handle is turned by the rotating cap. With ring for attaching fall prevention cord. Ideal for work in high places.
Standard Price: MYR 45.54- Days to Ship: 8 Day(s) or more -
Replacement Screwdriver (Incorporating Magnet)
ANEX
Comes with a bolster which can be tightened or loosened with a wrench. An electric screwdriver bit (subtense 6.35 mm hex shaft) can be used. The Phillips part of the bit has double spikes (AAC) securely holding screws. The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.
Standard Price: MYR 72.53 Days to Ship: 8 Day(s) -
Standard Price: MYR 98.08 Days to Ship: 8 Day(s) -
HIRAI KOGU
It is bent 20 mm under the neck, so final tightening is possible at corner angles where regular screwdrivers cannot reach or in narrow places with obstacles. The shaft has undergone black point processing over the whole length.
Standard Price: MYR 40.86 Days to Ship: 8 Day(s) -
Standard Price: MYR 44.07 Days to Ship: 9 Day(s) -
Electrician's Screwdriver (with Magnet) - Shaft Length 75mm
TRUSCO NAKAYAMA
The bottom of the grip is a ball type, making it easier to turn the screw.
Standard Price: MYR 23.71- Days to Ship: 9 Day(s) -
Anti-falling Electric Work Screwdriver (Magnetic Tip)
TRUSCO NAKAYAMA
360-degree rotation function that is easy to turn but unlikely to get tangled prevents drivers from falling off while working in high places.
Standard Price: MYR 46.01- Days to Ship: 8 Day(s) or more -
TRUSCO NAKAYAMA
A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.
Standard Price: MYR 99.15 Days to Ship: 9 Day(s) -
Plastic handle screwdriver (with magnet)
TRUSCO NAKAYAMA
The bottom of the grip is a ball type, making it easier to turn the screw.
Standard Price: MYR 21.35- Days to Ship: 9 Day(s) -
Standard Price: MYR 21.35- Days to Ship: 8 Day(s) or more -
Wooden handle through screwdriver (with magnet)
TRUSCO NAKAYAMA
Special rust-resistant plating is applied.
Standard Price: MYR 23.84- Days to Ship: 8 Day(s) or more -
WERA
The lasered tip provides exceptional bite into screws. Special grip design provides an easy grip and comfortable fit. White carton specifications.
- Volume Discount
Standard Price: MYR 698.35 Days to Ship: 8 Day(s) -
Micro Screwdriver Set - 12 pcs
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 774.43 Days to Ship: 8 Day(s) -
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 386.90 Days to Ship: 8 Day(s) -
Standard Price: MYR 77.78- Days to Ship: 8 Day(s) or more -
WERA
1,000 V insulation specifications. This product conforms to European Standard EN60900.
- Volume Discount
Standard Price: MYR 45.35- Days to Ship: 5 Day(s) or more -
WERA
Body center part opens when tail part is pushed, then bits inside can be replaced for use.
- Volume Discount
Standard Price: MYR 562.40 Days to Ship: 8 Day(s) -
WERA
Replacement drivers are collected in a compact, convenient, hand-held case.
Standard Price: MYR 888.42 Days to Ship: 8 Day(s) -
WERA
As the tip has a ballpoint specification, hex socket head cap bolts, and so on, can be turned even if the screwdriver is inclined slightly at an angle. Special grip design provides an easy grip and comfortable fit.
- Volume Discount
Standard Price: MYR 57.16- Days to Ship: 8 Day(s) or more -
WERA
Special grip design provides an easy grip and comfortable fit. Wera's proprietary Torx® HF shape fits Torx® screws perfectly.
- Volume Discount
Standard Price: MYR 139.35- Days to Ship: 8 Day(s) or more -
Long Phillips Screwdriver 51497
SIGNET
[Features]
· Easy to grip ergonomic handle reduces fatigue.
· A long type that's effective for work in deep areas.Standard Price: MYR 85.57 Days to Ship: 7 Day(s) or more -
SIGNET
[Features]
· Easy to grip ergonomic handle reduces fatigue.
· With base hexagon, a wrench can be applied for rotation.
· A through type with a grip end that has a striking area, which is ideal for removing fixed screws.Standard Price: MYR 68.57 Days to Ship: 7 Day(s) or more -
SIGNET
[Features]
· Easy to grip ergonomic handle reduces fatigue.
· With base hexagon, a wrench can be applied for rotation.
· A through type with a grip end that has a striking area, which is ideal for removing fixed screws.- Volume Discount
Standard Price: MYR 66.00- Days to Ship: 4 Day(s) or more -
LED Electrical Screwdriver D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.- Volume Discount
Standard Price: MYR 42.66 Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· Ideal for attaching and detaching fine screws for eyeglasses.Standard Price: MYR 35.99 Days to Ship: 9 Day(s) -
Standard Price: MYR 8.71- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 9.83 Days to Ship: 8 Day(s) -
Wooden handle through screwdriver (strong class)
ANEX
[Features]
· High accuracy, black point finish screwdriver with magnet.Standard Price: MYR 69.50- Days to Ship: 12 Day(s) or more -
Standard Price: MYR 43.09 Days to Ship: 16 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | TONE | TONE | TONE | HOZAN | HOZAN | HOZAN | ANEX | ANEX | ANEX | HIRAI KOGU | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | SIGNET | SIGNET | SIGNET | HOZAN | TRUSCO NAKAYAMA | ANEX | ANEX | ANEX | ANEX |
| Product Series | Screwdriver for Special Screw and for Line Recess Screw (for LR Screw) | ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 8 Day(s) | 9 Day(s) | 1 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 5 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 8 Day(s) | 12 Day(s) or more | 16 Day(s) or more |
| Tip standards | Other | Phillips (+) / Flathead (-) | Flathead (-) / Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Torx / Other | Torx | Torx | Combination | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Box | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Combination | Combination | Phillips (+)/Flathead(-) | Flathead (-) / Phillips (+)/Flathead(-) / Torx / Hexagon | Flathead (-) / Torx / Hexagon | Combination | Combination | Ballpoint | Torx | Phillips (+) | Phillips (+) | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+) | Flathead (-) | Flathead (-) | Phillips (+) |
| Tip size / Phillips (+) | - | No.2 | Other | Other | No.00 / No.0 | No.00 / No.1 / No.2 | - | - | - | - | No.1 / No.2 / No.3 | No.2 | No.2 | No.00 | No.2 | - | No.2 | No.2 | No.1 / No.2 | No.1 / No.2 | No.0 / No.1 / No.2 | No.1 / No.2 | No.2 | No.0 / No.1 / No.2 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 / No.4 | No.1 / No.2 / No.3 / No.4 | No.1 / No.2 / No.3 | No.00 / No.0 | No.00 / No.0 | No.1 / No.2 / No.3 | - | No.1 / No.2 | No.1 / No.2 / No.3 | - | - | No.2 | No.2 | - | - | No.00 | No.0 | - | - | No.2 |
| Tip size / flathead (-) blade width (mm) B1 | - | 6.3 | 0.8 ～ 2.5 | 0.8 ～ 2.5 | 3 ～ 4 | 2.6 ～ 6 | - | - | - | - | 4.5 ～ 9 | 6 | 6 | 1.8 | 6 | - | 6 | 6 | - | - | 1.8 ～ 6 | 5.5 ～ 6 | 6 | 1.8 ～ 6 | 4.5 ～ 8 | 4.5 ～ 9 | 4.5 ～ 9 | 6 ～ 8 | 1.5 ～ 3 | 1.2 ～ 3 | 4 ～ 7 | 3 ～ 6.5 | 5.5 ～ 6.5 | 5.5 ～ 8 | - | - | - | - | 5.5 ～ 8 | 2.5 | 1.8 | - | 2.5 | 10 | - |
| Shaft length L (mm) | 75 | 38 | - | 15 ～ 20 | 80 | 67 ～ 89 | 23 | 75 ～ 100 | 75 | - | 50 ～ 200 | 267 | 267 | 23 | 35 | 100 ～ 125 | 100 ～ 150 | 135 | - | 100 | - | 75 ～ 200 | 100 ～ 150 | - | 50 ～ 250 | 50 ～ 200 | 50 ～ 200 | - | - | - | - | - | - | - | 60 ～ 150 | 300 | 300 | 100 | 75 ～ 150 | 17 | 11 | 50 ～ 100 | 100 | 250 ～ 300 | 300 |
| Single Product/Set Classification | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Set Product | Set Product | Set Product | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item |
| Shaft type | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round |
| Magnet | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | Available | Available | NA | NA | NA | NA | Available | NA | Available | NA | Available | Available | NA | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available |
| Shaft through | NA | NA | NA | NA | NA | - | NA | NA | NA | - | Available | NA | NA | NA | NA | NA | NA | - | - | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | - | NA | - | - | NA | NA | NA | Available | Available | NA | - | NA | NA | Available | NA |
| Bolster | NA | NA | NA | NA | NA | - | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | Included | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | - | - | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | NA |
| Grip Type | Resin | Resin | Resin | Resin | Rubber | Resin | Rubber | Resin | Resin | - | Wooden handle | Resin | Resin | Resin | Rubber | Resin | Rubber | Resin | Rubber | Resin | Resin | Rubber | Resin | Resin | Resin | Wooden handle | Wooden handle | Rubber | Rubber | Rubber | - | - | Rubber | Rubber | Rubber | Rubber | Resin | Resin | Resin | Resin | - | Resin | Resin | Wooden handle | Resin |
| Tip size / flathead (-) blade thickness (mm) B2 | - | 0.9 | 0.35 ～ 0.7 | 0.35 ～ 0.7 | 0.4 ～ 0.5 | - | - | - | - | - | 0.6 ～ 1.1 | 0.8 | 0.8 | 0.3 | 0.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.75 ～ 1.1 | 0.6 | - | - | 0.4 | 1.2 | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4 ～ 10 | - | - | - | - | - | - | - | - | - | - | - | 8 ～ 10 | 0.9 ～ 2 | - | 3 ～ 6 | 2.5 ～ 6 | 6 | 3 ～ 5 | 1.5 ～ 12 | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.0, 1.2, 1.6
- 1.2
- 1.2、1.8、2.3
- 1.2、1.8、2.4、3.0
- 1.3
- 1.35
- 1.4
- 1.4, 2.0, 2.4
- 1.5
- 1.5, 2.0, 3.0
- 1.6
- 1.8
- 1.9
- 1.95
- 2
- 2.1
- 2.3
- 2.4
- 2.5
- 2.5、3.0、4.0
- 2.6
- 2.65
- 3
- 3, 5, 6
- 3.1
- 3.4
- 3.5
- 3.6
- 4
- 4 × 6
- 4.3
- 4.5
- 4.5, 5.5, 7.0
- 4.5、6.0
- 4.7
- 4.9
- 5
- 5.5
- 6
- 6.25
- 6.3
- 6.35
- 6.5
- 7
- 7, 9, 12
- 7.2
- 8
- 8, 9, 10, 12, 14
- 9
- 9, 11
- 9.5
- 10
- 11
- 12
- 13
- 14
- 16
- 18
- 30
- 100
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 80~150
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- PB SWISS TOOLS (91)
- VESSEL (67)
- ANEX (33)
- ENGINEER (29)
- WERA (28)
- WIHA (20)
- KTC(KYOTO TOOL) (19)
- HOZAN (17)
- TRUSCO NAKAYAMA (15)
- SK 11 (13)
- TONE (11)
- HIRAI KOGU (9)
- SUNFLAG (7)
- KO-KEN TOOL (6)
- E VALUE (4)
- SIGNET (4)
- EIGHT TOOL (3)
- HAZET (2)
- TOP (2)
- FUJIYA (1)
- HANDIWORK (1)
- Ｍ＆Ｍ (1)
- MITOLOY (1)
- SMATO (1)
- TRAD (1)
- TAKAGI (0)
- HIOS (0)
- TGK (0)
- SUEKAGE TOOL (0)
- BESTTOOL (0)
- ARC GREATTOOL (0)
- BONDHUS (0)
- AS ONE (0)
- WILLIAMS (0)
- ARC (0)
- ESCO (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy