(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Screwdrivers（Page2）
| Days to Ship |
|
|---|
-
Megadora Thin-handle Screwdriver No.910
VESSEL
Thin shaft screwdriver.
[Features]
· Fine shaft type with a diameter of 4 mm or less.
· The blade has a black point treatment without a thick plating layer.
[Applications]
· It is convenient especially when working on deep and narrow places.- Volume Discount
Standard Price: MYR 42.53- Days to Ship: 8 Day(s) or more -
Screwdriver, Famidora 8 No.TD-800
VESSEL
A screwdriver set for home and office.
[Features]
· A set of Phillips and flathead screwdrivers, pin remover, and drill.
· Ergonomic handle that fits the palm of the hand.
· Color-coded colorful screwdriver (replacement shaft).
· A convenient stand for storage.
[Applications]
· For homes and offices.- Volume Discount
Standard Price: MYR 89.15 Days to Ship: 9 Day(s) -
Soft Finish® ESD Screwdriver Set (Set of 5)
WIHA
A 5-piece screwdriver set of Soft Finish® ESD anti-static stubby screwdrivers, including 3 Phillips screwdrivers and 2 flathead screwdrivers.
Standard Price: MYR 419.53 Days to Ship: 4 Day(s) or more -
Ceramic Adjustment Screwdriver DA-48 – 52
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties.
· Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment. (Tip: +/- Bit, Shaft: Hex)
· Pencil-type portable design with caps for protecting tip.
[Applications]
· For audio equipment such as tuners and amplifiers, TVs, video cameras, and radio related equipment.
· For work related to wireless devices, computers and communications.- Volume Discount
Standard Price: MYR 121.07 Days to Ship: 10 Day(s) -
Ceramic Adjustment Screwdriver, Detachable DA-72 – 79
ENGINEER
Thin-shaft ceramic adjustment screwdriver that's ideal for trimmer adjustment of deep areas.
[Features]
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
· Since the shaft portion and the handle can be detached, it is also possible to use it mounted on machines, etc.
[Applications]
· This fine shaft type is ideal for adjustment of chassis parts and other deep areas.- Volume Discount
Standard Price: MYR 88.56 Days to Ship: 9 Day(s) -
ENGINEER
A mini soft screwdriver set with a soft grip which fits well in the hand.
[Features]
· It is a soft grip which fits well in the hand.
· The shaft is made of a special alloy steel used in the manufacturing industry, and has been hardened over the whole length.
· The tip has been black-point processed.
· It has a chrome plated finish.
[Applications]
· For tightening and removing various screws.- Volume Discount
Standard Price: MYR 113.28 Days to Ship: 8 Day(s) -
Standard Price: MYR 44.07 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.
Standard Price: MYR 99.15 Days to Ship: 9 Day(s) -
Craft Form Diamond Screwdriver
WERA
Diamond Screwdriver
[Features]
The blade is coated with fine diamond particles.
Cam out is prevented by the rough diamond particles sticking into the thread, and the hardness of the diamonds reduces blade wear, contributing to longer life.
With specially shaped grip, achieving ease of grip and good fit.
With bolster that can be securely fixed with a wrench.
[Specifications]
Set Classification: Single Item
Shaft Type: Angle
Magnet: None
Grip Type: Rubber- Volume Discount
Standard Price: MYR 100.67 Days to Ship: 9 Day(s) -
Micro Screwdriver Set - 12 pcs
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 774.43 Days to Ship: 8 Day(s) -
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 386.90 Days to Ship: 8 Day(s) -
Interchangeable ESD Micro Screwdriver (Anti-static Type)
WERA
The product conforms to European Standards EN100-015-1 as the optimal precision screwdriver for assembly of precision electric equipment. Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
- Volume Discount
Standard Price: MYR 752.65- Days to Ship: 8 Day(s) or more -
ANEX
[Features]
· Includes a ratchet mechanism that enables one tool to be used for three types of Phillips head screws.Standard Price: MYR 57.19 Days to Ship: 8 Day(s) -
Standard Price: MYR 8.71- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 270.42- Days to Ship: 8 Day(s) -
Standard Price: MYR 274.81- Days to Ship: 8 Day(s) -
Standard Price: MYR 2,228.09 Days to Ship: 15 Day(s) -
Hand Socket 3/8" (9.5 mm) Offset Spin Type Handle 3769NWF-160
KO-KEN TOOL
This product can be used in 2 ways. By inserting the socket lightly until you hear a clicking sound, you can make the head rotate flexibly up to 15 degrees in vertical and horizontal directions, and by inserting it further, you can make it move linearly in the same way as the conventional spin-type handles.
- Volume Discount
Standard Price: MYR 128.40- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 357.37 Days to Ship: 8 Day(s) -
Hand Socket 3/8″(9.5 mm) Spin-Type Handle 3769N-160/-230
KO-KEN TOOL
[Specifications]
·Grip type: Rubber
·Shaft type: round
·Without magnet- Volume Discount
Standard Price: MYR 108.64- Days to Ship: 8 Day(s) or more -
Interchangeable Precision Screwdriver
ENGINEER
The shaft length is variably adjustable over the range 18-90 mm.
- Volume Discount
Standard Price: MYR 60.84 Days to Ship: 9 Day(s) -
Interchangeable Micro Screwdriver
WERA
Micro screwdriver set for precision work.
[Features]
・ Interchangeable.
・ Handle + bit set.
・ With a zone that can rotate quickly.
·Comes with a precision adjustment aim (hexagonal).
・ Designed to transmit stronger torque with your fingers.
・ Comes with a dedicated pouch that can be securely stored.
[Applications]
・ Ideal for assembling electronic parts, etc.- Volume Discount
Standard Price: MYR 683.55 Days to Ship: 9 Day(s) -
Plastic Handle Precision Screwdriver
TRUSCO NAKAYAMA
[Features]
· A precision screwdriver with strengthened tip, using nickel-chrome-molybdenum vanadium steel.
· Lightweight and easy to use as it has a plastic handle.
· Comes with rotating cap.Standard Price: MYR 15.67- Days to Ship: 8 Day(s) or more -
Precision Driver, Precision Screwdriver, TSDA
TRUSCO NAKAYAMA
[Features]
· It is a perfect screwdriver for attaching and detaching fine screws.
· Convenient for tasks such as the assembly and repair of watches, radios, glasses, precision machines, plastic models, and more.Standard Price: MYR 15.92- Days to Ship: 9 Day(s) -
Soft Thin Shaft Cross-Head Screwdriver
KTC(KYOTO TOOL)
[Features]
· Uses environmentally-friendly material (elastomer) for a lightweight grip that does not feel sticky.
· An orange grip color indicates a cross-head bit.
· The shaft is a non-through type with a magnetic tip.- Volume Discount
Standard Price: MYR 49.44- Days to Ship: 9 Day(s) -
Comfortable Grip Type Screwdriver Set (3 Pcs./Set)
BONDHUS
High-quality comfortable grip type screwdriver set made in Germany 3 pcs./set
[Features]
· Set of 3 cross-head screwdrivers.
· Employs a well-cushioned bar grip/double-molded handle.
· Powerful tightening work by inserting the blade is also possible.
· The hardness and torque values are equivalent to or exceed the German DIN standard and ISO criteria.
· Designed not to rotate during work.
· Chromium-vanadium-molybdenum blade, chrome plated finish.
· The blade tip is precision machined with a black tip that fits the screw with high precision.
[Applications]
· Ideal for tightening and/or loosening screws.- Volume Discount
Standard Price: MYR 119.23 Days to Ship: 9 Day(s) -
Precision Screwdriver Set, Precision Grip
BONDHUS
High-quality precision grip precision screwdriver set made in Germany.
[Features]
· Set of 3 cross-head screwdrivers and 3 flathead screwdrivers for a total of 6.
· Polypropylene resin handle.
· The blade tip is precision machined with a black tip.
· Powerful tightening work by inserting the blade is also possible.
· The hardness and torque values are equivalent to or exceed the German DIN standard and ISO criteria.
[Applications]
· Ideal for tightening and/or loosening screws.Standard Price: MYR 170.05 Days to Ship: 9 Day(s) -
No.B-5100 Power Grip Precision Thin Shank Screwdriver
VESSEL
[Features]
· Long type with a thin shank.
· Knurled to make it easier to rotate quickly.
· An ergonomically designed handle made from acetate resin. Includes a hole for hanging from a hanger.Standard Price: MYR 58.66- Days to Ship: 9 Day(s) -
Stubby Phillips Screwdriver PB 8195
PB SWISS TOOLS
[Features]
· Stubby Phillips screwdriver- Volume Discount
Standard Price: MYR 101.83 Days to Ship: 9 Day(s) -
ESD (Electrostatic Discharge) Phillips Screwdriver PB 8190 ESD
PB SWISS TOOLS
[Features]
· ESD (electrostatic discharge) Phillips screwdriverStandard Price: MYR 82.07 Days to Ship: 8 Day(s) -
DIN ISO 8764-1 Compliant Pozidriv Screwdriver PB 8192 RB
PB SWISS TOOLS
[Features]
· Pozidriv screwdriver conforms to DIN ISO 8764-1
· Color-coded according to handle size- Volume Discount
Standard Price: MYR 150.36 Days to Ship: 8 Day(s) -
Standard Price: MYR 53.11 Days to Ship: 8 Day(s) -
SwissGrip Precision Phillips Screwdriver
PB SWISS TOOLS
High-precision screwdriver
[Features]
· Slip-resistant when gripped with wet hands. Resistant to oil/gasoline.
· Wipes clean when dirtyStandard Price: MYR 73.36 Days to Ship: 8 Day(s) -
SwissGrip ESD Precision Phillips Screwdriver
PB SWISS TOOLS
High-precision ESD Phillips screwdriver
[Features]
· Wipes clean when dirty.
[Applications]
· Electrostatic discharge (ESD): Appropriate for general workplaces where there is a possibility of electrostatic charge or discharge causing danger or damage- Volume Discount
Standard Price: MYR 83.99 Days to Ship: 8 Day(s) -
GT Precision Screwdriver Set GTSD-01
ARC GREATTOOL
[Features]
· 6-precision screwdriver set
[Applications]
· Assembly repair, etc. of glasses, watches and other precision worksStandard Price: MYR 40.96- Days to Ship: 13 Day(s) or more -
ARC GREATTOOL
[Features]
· Specifications: interchangeable screwdriver· Set contents: +0, +1, +2, pin removal, -3, -5, -6, gimlet, Heaton turning· Coloring: red for cross-head, yellow for flathead/gimlet
[Applications]
· For regular toolsStandard Price: MYR 41.28 Days to Ship: 13 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | VESSEL | VESSEL | WIHA | ENGINEER | ENGINEER | ENGINEER | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | WERA | WERA | WERA | WERA | ANEX | ANEX | KO-KEN TOOL | KO-KEN TOOL | KO-KEN TOOL | KO-KEN TOOL | KO-KEN TOOL | KO-KEN TOOL | ENGINEER | WERA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | KTC(KYOTO TOOL) | BONDHUS | BONDHUS | VESSEL | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | ARC GREATTOOL | ARC GREATTOOL |
| Product Series | Hand Socket 3/8" (9.5 mm) Offset Spin Type Handle 3769NWF-160 | ESD (Electrostatic Discharge) Phillips Screwdriver PB 8190 ESD | ||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 10 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 5 Day(s) or more | 8 Day(s) | 8 Day(s) | 15 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 13 Day(s) or more | 13 Day(s) or more |
| Tip standards | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) | Combination | Phillips (+)/Flathead(-) | Combination | Combination | Phillips (+) | Other | Other | Other | Other | Other | Other | Phillips (+)/Flathead(-) | Combination | Phillips (+) / Combination | Phillips (+) / Combination | Phillips (+) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) | Phillips (+) / Phillips (+)/Flathead(-) | Combination |
| Tip size / Phillips (+) | No.0 | No.0 | No.0 | Other | Other | No.0 | No.0 | No.0 | No.0 | No.0 | No.0 | No.0 | Other | No.0 | Other | Other | Other | Other | Other | Other | No.0 | No.0 | No.0 | No.0 | No.0 | No.0 | No.0 | No.0 | No.0 | No.0 | No.0 | No.0 | No.0 | No.0 | No.0 / Other | No.0 |
| Tip size / flathead (-) blade width (mm) B1 | - | 2.5 ～ 6 | 3 ～ 4 | 0.8 | - | 3 ～ 4 | 1.8 ～ 6 | 1.8 ～ 6 | - | 1.5 ～ 3 | 1.2 ～ 3 | 1.5 ～ 3 | - | - | - | - | - | - | - | - | 2.5、3.0、4.0 | - | 1.2、1.8、2.3 | 1.2、1.8、2.4、3.0 | - | - | 1.5, 2.0, 3.0 | - | - | - | - | - | - | - | 1.0, 1.2, 1.6 ～ 1.4, 2.0, 2.4 | 3, 5, 6 |
| Shaft length L (mm) | 75 ～ 100 | - | 60 ～ 100 | - | 15 | 80 | - | - | 60 | - | - | - | - | 50 ～ 100 | - | - | - | 50 ～ 120 | - | 50 ～ 120 | 18～90 | - | 21 | 28 | - | 60, 80, 100 | 60, 75, 80 | - | - | 60 | 60 | - | - | - | - | - |
| Single Product/Set Classification | Single Item | Set Product | Set Product | Single Item | Single Item | Set Product | Set Product | Set Product | Single Item | Set Product | Set Product | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item / Set Product | Single Item / Set Product | Single Item | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | - | - | Set Product | Set Product |
| Shaft type | Round | Round | Round | Round | Round | Round | Round | Round | Square | Round | Round | - | - | Round | - | - | - | Round | Round | Round | Square | - | - | - | - | - | - | Round | Round | Round | Round | - | - | - | - | - |
| Magnet | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | - | - | - | - | Available | - | - | NA | - | - | - | - | - | - | - | - |
| Shaft through | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | NA | NA | NA | NA | NA | NA | NA | NA | - | - | - | NA | - | - | NA | NA | NA | NA | - | - | - | - | - |
| Bolster | NA | NA | NA | NA | NA | NA | NA | NA | Included | NA | NA | - | - | NA | NA | NA | NA | NA | NA | NA | - | - | - | - | NA | - | - | NA | NA | NA | NA | - | - | - | - | - |
| Grip Type | Resin | Resin | Rubber | Resin | Resin | Rubber | Resin | Resin | Rubber | Rubber | Rubber | Rubber | - | Resin | Rubber / Stainless Steel | Rubber / Stainless Steel | - | Rubber | Rubber | Rubber | Resin | - | - | - | Rubber | - | - | Resin | - | - | - | - | - | - | - | - |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | 0.5 ～ 0.8 | 0.35 | - | 0.4 ～ 0.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.23 ～ 0.5 | - | 0.25、0.31、0.36、0.60 | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - | - | 0.9 ～ 2 | - | 1.5 ～ 2 | - | - | - | - | - | - | - | - | - | 1.5 ～ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.0, 1.2, 1.6
- 1.2
- 1.2、1.8、2.3
- 1.2、1.8、2.4、3.0
- 1.3
- 1.35
- 1.4
- 1.4, 2.0, 2.4
- 1.5
- 1.5, 2.0, 3.0
- 1.6
- 1.8
- 1.9
- 1.95
- 2
- 2.1
- 2.3
- 2.4
- 2.5
- 2.5、3.0、4.0
- 2.6
- 2.65
- 3
- 3, 5, 6
- 3.1
- 3.4
- 3.5
- 3.6
- 4
- 4 × 6
- 4.3
- 4.5
- 4.5, 5.5, 7.0
- 4.5、6.0
- 4.7
- 4.9
- 5
- 5.5
- 6
- 6.25
- 6.3
- 6.35
- 6.5
- 7
- 7, 9, 12
- 7.2
- 8
- 8, 9, 10, 12, 14
- 9
- 9, 11
- 9.5
- 10
- 11
- 12
- 13
- 14
- 16
- 18
- 30
- 100
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 80~150
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- ENGINEER (12)
- PB SWISS TOOLS (11)
- WERA (10)
- VESSEL (8)
- ANEX (6)
- KO-KEN TOOL (6)
- TRUSCO NAKAYAMA (6)
- HOZAN (5)
- KTC(KYOTO TOOL) (3)
- ARC GREATTOOL (2)
- BONDHUS (2)
- E VALUE (2)
- WIHA (2)
- FUJIYA (1)
- HANDIWORK (1)
- HIRAI KOGU (1)
- Ｍ＆Ｍ (1)
- SK 11 (1)
- TRAD (1)
- MITOLOY (0)
- TAKAGI (0)
- HIOS (0)
- SMATO (0)
- TGK (0)
- SUEKAGE TOOL (0)
- BESTTOOL (0)
- TOP (0)
- SIGNET (0)
- HAZET (0)
- AS ONE (0)
- EIGHT TOOL (0)
- WILLIAMS (0)
- ARC (0)
- SUNFLAG (0)
- TONE (0)
- ESCO (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy