(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Screwdrivers（Tip standards：Flathead (-) Page2）
| Days to Ship |
|
|---|
-
Interchangeable Ceramic Adjustable Screwdriver D-280
HOZAN
· A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Combination: D-280, -0.9 x -1.8 mm, blade thickness 0.4 mm (D-282), -1.3 x -2.6 mm, blade thickness 0.4 mm (D-283).- Volume Discount
Standard Price: MYR 283.05 Days to Ship: 9 Day(s) -
TONE
Baby screwdriver with round shaft.
[Features]
Convenient for adjustment of metering and precision equipment, etc.
[Applications]
· For assembly and maintenance of electronic devices and precision equipment.
· Assembly and maintenance work of automobiles, motorcycles and bicycles.- Volume Discount
Standard Price: MYR 16.43 Days to Ship: 9 Day(s) -
TONE
Square shaft through screwdriver.
[Features]
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· The tip has a high-strength magnet.
· Plastic grip.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.- Volume Discount
Standard Price: MYR 33.49 Days to Ship: 9 Day(s) -
TONE
A piercing square-shafted driver with a plastic grip.
[Features]
· Plastic grip.
· Flathead shaft length: 150 mm, total length: 260 mm.
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· The tip has a high-strength magnet.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.- Volume Discount
Standard Price: MYR 57.10 Days to Ship: 9 Day(s) -
Crystalline Screwdriver (Thin Shaft Type)
VESSEL
Crystalline handle. Shines like a crystal. Has a thin, long shape; ideal for tightening screws in tights spaces.
- Volume Discount
Standard Price: MYR 27.12 Days to Ship: 9 Day(s) -
Standard Screwdriver No. 900, MEGADORA
VESSEL
Easy-to-use regular screwdriver that is easy to grip however you hold it.
[Features]
· The cross-recessed end is a jaw fit which firmly grips the screw.
· The knurled shaft prevents slippage of fingers and enables holes in wood or boards to be widened.
[Applications]
· For various screw fastening work.- Volume Discount
Standard Price: MYR 31.70- Days to Ship: 9 Day(s) -
HOZAN
Adjustment driver that uses metal only at the tip to eliminate adjustment deviation.
[Features]
· Blade width: 2, blade thickness: 0.5, shaft length: 100 mm.
· Material: Stainless steel (tip), cellulose acetate (shaft).
[Applications]
· Can also be used for tip models (surface-mount device type).- Volume Discount
Standard Price: MYR 23.22 Days to Ship: 8 Day(s) -
Electric Screwdriver D-331/D-332
HOZAN
An electric screwdriver equipped with a cushioned handle that is highly effective for slip prevention.
[Features]
· Elastomer resin is used for slip prevention of the handle component.
· Tightly fits on to the handle body and exhibits excellent gripping performance.
· Has a handle shape that makes pressing the screwdriver against screws easy so that force can be transferred well.
· The tip has been magnetically processed to hold screws and the handle is made of polypropylene resin and is lightweight.
· A design without plating in order to avoid changes in tip precision.
[Applications]
· Ideal for screw tightening work in deep and narrow spaces.
· Electric type screwdriver that can be easily pushed and turned, recommended for the Licensed Electrician Proficiency Test.- Volume Discount
Standard Price: MYR 53.41- Days to Ship: 1 Day(s) or more -
TONE
Square shaft through screwdriver.
[Features]
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· Plastic grip.
· The tip has a high-strength magnet.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.- Volume Discount
Standard Price: MYR 42.48 Days to Ship: 9 Day(s) -
Crystalline Screwdriver (Precision Type) No. 6900
VESSEL
Ultra-fine screwdriver ideal for precision work.
[Features]
· The grip is made of plant-derived crystalline that's eco-friendly and resistant to oil and chemicals.
· Color-coded by Phillips or flathead.
· For extremely precise work.
· The end of the handle has a concave shape that allows fingertips to be used to push against and perform quick turning.
· Cellulose acetate resin is used.
· Hexagonal cross section accurately transmits torque.
[Applications]
· General precision work.- Volume Discount
Standard Price: MYR 18.40 Days to Ship: 9 Day(s) -
Super Cushion Tang-Thru Screwdriver No. 730
VESSEL
Super-cushion through screwdriver with built-in gel that fits in the palm of your hand.
[Features]
· Through type with a star-shaped nut which can be hit with a hammer.
· The shaft is tough and whole body is quenched with excellent durable chromium vanadium metal.
· Plated with a rust-resistant, black chrome finish.
[Applications]
· For various screw fastening work.- Volume Discount
Standard Price: MYR 49.06- Days to Ship: 9 Day(s) -
Free-Turning Ball Grip Screwdriver No. 220F
VESSEL
[Features]
· The freely turning section at the base of the shaft enables it to turn quickly.
· The part that contacts the hand has an outstanding fit feel and uses elastomer resin- Volume Discount
Standard Price: MYR 60.31- Days to Ship: 9 Day(s) -
MEGADORA Chisel Screwdriver No. 970
VESSEL
Heavy duty through type screwdriver that does not distort the cutting edge even when striking.
[Features]
· Utilizes special steel material for high-grade chisels.
· Hardness of 58 HRC.
· Pursues abrasion resistance and sharpness of the cutting edge.
· Elastomer resin absorbs impacts to lessen hand fatigue.
· Through type, with a large nut.
· Carburized and quenched to minimize distortion of the nut.
[Applications]
· Processing and chipping of metals and rock.Standard Price: MYR 94.58 Days to Ship: 8 Day(s) -
ENGINEER
Standard-type Phillips screwdrivers and flathead screwdrivers.
[Features]
· Selection of various sizes is enabled in accordance with work applications.
[Applications]
· For work tightening and removing Phillips screws/flathead screws.- Volume Discount
Standard Price: MYR 9.97- Days to Ship: 9 Day(s) -
Standard Price: MYR 5.76 Days to Ship: 9 Day(s) -
ENGINEER
Knurled driver can perform rapid turning.
[Features]
· The shaft is made of chrome-vanadium steel, and the tip has undergone black point processing.
· A large grip that produces high clamping force.
[Applications]
· For tightening and removing various screws.- Volume Discount
Standard Price: MYR 24.67- Days to Ship: 9 Day(s) -
Mini Soft Screw Driver DG-21 – 24
ENGINEER
Mini soft screwdriver ideal for tightening and removing various screws.
[Features]
· It is a soft grip which fits well in the hand.
· The shaft is chrome-vanadium steel.
· The tip has been black-point processed.
[Applications]
· For tightening and removing various screws.- Volume Discount
Standard Price: MYR 32.13- Days to Ship: 8 Day(s) or more -
Long Grip Screwdriver DG-11 – 14
ENGINEER
Cushion grip screwdriver that perfectly fits the hand with outstanding tightening force.
[Features]
· The shaft is chrome-vanadium steel.
· The tip has been black-point processed.
[Applications]
· For tightening and removing various screws.- Volume Discount
Standard Price: MYR 59.45- Days to Ship: 8 Day(s) -
Electroscopic Screwdriver DKD-01/DKD-02
ENGINEER
Screwdriver for low voltage and automobile spark plug electrical inspection.
[Features]
· With a clip, it is convenient for carrying around.
· The built-in neon tube lights up.
[Applications]
· DKD-01: Ideal for conductivity and wireless communicator transmission tests.
· DKD-02: Ideal for vehicle spark plug voltage detection.- Volume Discount
Standard Price: MYR 28.46 Days to Ship: 9 Day(s) -
ENGINEER
This is a type of adjusting screwdriver with a 3 mm tip.
[Features]
· 3 mm tip type with semi-fixed resistance for trimmer capacitors.
· With a clip, it is convenient for carrying around.
[Applications]
· Ideal for adjusting electronic substrate circuit boards.- Volume Discount
Standard Price: MYR 28.95 Days to Ship: 9 Day(s) -
Adjustment Screwdriver (for High Frequency)
ENGINEER
This is a type of adjusting screwdriver with a 3 mm tip, which is used for high frequencies.
[Features]
· For high frequency.
· 3 mm tip type with semi-fixed resistance for trimmer capacitors.
· The tip is a tough SK material bit.
[Applications]
· Ideal for adjusting electronic substrate circuit boards.- Volume Discount
Standard Price: MYR 18.35- Days to Ship: 9 Day(s) -
Stubby Phosphorescent Screwdriver (Magnetic)
ANEX
[Features]
· Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)
· Made of martensitic special stainless steel (high strength stainless steel (550)).Standard Price: MYR 39.12- Days to Ship: 8 Day(s) -
"Superfit" ACR Heavy-duty Screwdriver (Magnetic)
ANEX
[Features]
·The shape of the tip has a structure that makes it difficult to come out (ACR (R) for the Phillips, serrated for the Slotted) to prevent the cutting edge from rising from the screw.
·With a hexagonal bolster, you can use a wrench to turn it more strongly.Standard Price: MYR 54.43- Days to Ship: 8 Day(s) -
Slit Power Screwdriver (Electric Type With Magnet)
ANEX
[Features]
· Non-slip, powerful slit shape and hexagon shape (grip end).Standard Price: MYR 25.20- Days to Ship: 8 Day(s) -
Slit power screwdriver (electric type/through/magnet included)
ANEX
[Features]
· Non-slip, powerful slit shape and hexagon shape (grip end).
· Includes a washer that can be hit with a hammer.Standard Price: MYR 30.57- Days to Ship: 8 Day(s) -
Stubby Phosphorescent Screwdriver (Stubby Type / Magnetic)
ANEX
[Features]
· Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)
· Martensitic special stainless steel (high strength stainless steel (550)).Standard Price: MYR 30.85 Days to Ship: 9 Day(s) -
Split Handle Driver (Penetrating) 9210
ANEX
[Features]
·Suitable for removing spot welds, removing tiles, removing burrs, and chipping concrete.
·A wide grip end that prevents the hand from slipping when struck.
·Shock-resistant and oil-resistant resin handles are used.
·A convex washer that can be easily struck with a hammer.
·penetrating type.
·Magnets included.Standard Price: MYR 115.03- Days to Ship: 9 Day(s) -
ANEX
[Features]
· A long shaft type.
· Comes with rotating cap.
· Acetate Resin HandleStandard Price: MYR 21.82- Days to Ship: 8 Day(s) -
Pencil Type Inspection Screwdriver
ANEX
[Features]
· It allows the presence of voltage to be checked in general households and factories.
· It indicates conductivity with a buzzer and LED lamp.Standard Price: MYR 69.40 Days to Ship: 8 Day(s) -
Spark Testing Screwdriver (Pencil Type with LED)
ANEX
[Features]
·You can easily check whether the power supply (AC) in general households and factories is energized.
·Wiring continuity can be checked.
·An LED lamp will let you know.
·It has a bright LED lamp.
·A continuity test is also possible.Standard Price: MYR 43.86 Days to Ship: 9 Day(s) -
ANEX
[Features]
·Compatible with 8 mm hexagonal shaft and single-headed bits.
·Bits for manual impact drivers.Standard Price: MYR 19.15 Days to Ship: 8 Day(s) -
Rubber Grip Screwdriver (Magnetic)
HIRAI KOGU
[Features]
· Strong cushion grip enables excellent tightening force.
· (+) No. 2 x 100, (-) 6.3 x 100 shaft with knurling for fast turning and easy filing.Standard Price: MYR 32.75- Days to Ship: 8 Day(s) -
Cushioned Electrical Screwdriver (with Magnet)
HIRAI KOGU
[Features]
· The shaft is made from the highest grade nickel-chrome-molybdenum-vanadium steel.
· Generates powerful tightening torque, and has a strong ball cushioned grip.
· (+)/(-) color coding that enables the grip end to also be checked.
· ((+): Yellow, (-): red) color coding one-point design that enables the grip end to also be checked (patent pending).Standard Price: MYR 31.78- Days to Ship: 8 Day(s) -
Strong Square Pass-Through Shank Screwdriver (Pass-Through, Magnetic)
HIRAI KOGU
Strongly tighten or loosen by hitting the butt and pushing in a screw.
Standard Price: MYR 30.83- Days to Ship: 8 Day(s) or more -
HIRAI KOGU
[Features]
· Wide-type tip allows rotation of large screws that can only be rotated using large flathead screwdrivers.
· Can be used to rotate plastic screws, etc. without damaging them.
· A square shaft type that can be clamped on with pliers or a monkey wrench.
· Can be used to rotate plastic screws such as battery screws, etc. without damaging them.
[Applications]
· Related to implements used in the gas / water supply.
· For attaching/removing plastic screws from batteries, etc.Standard Price: MYR 53.02 Days to Ship: 8 Day(s) -
"Hybrid Grip Screwdriver" (Magnetic)
SUNFLAG
[Features]
· The tough holder part can be firmly tightened using a wrench.
· Heavy duty holder can also be used with interchangeable types.
· Insertion part is 6.35 mm. Can also be used with commercially available 6.35 mm tool bits.- Volume Discount
Standard Price: MYR 74.13 Days to Ship: 8 Day(s) -
Standard Price: MYR 28.87 Days to Ship: 9 Day(s) -
Piercing Screwdriver (Incorporating Magnet)
TRUSCO NAKAYAMA
[Features]
· Features a non-slip ergonomically designed grip.
· The hexagon nut attached to the base of the shaft can be used together with a wrench to enable strong turning.Standard Price: MYR 39.26- Days to Ship: 8 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Can be used for a wide range of applications, such as in-factory work, maintenance of machinery and vehicles, etc.
· Commercially-available bits can be used with the hex holes on the rear of the handle, and deep screw tightening can be achieved by installing long bits.Standard Price: MYR 35.49 Days to Ship: 8 Day(s) -
WERA
[Features]
· The lasered tip provides exceptional bite into screws.
· Special grip design provides an easy grip and comfortable fit.- Volume Discount
Standard Price: MYR 79.11- Days to Ship: 8 Day(s) or more -
WERA
[Features]
· The lasered tip provides exceptional bite into screws.
· Special grip design provides an easy grip and comfortable fit.
· Equipped with a bolster that can be firmly tightened with a wrench, etc.- Volume Discount
Standard Price: MYR 59.06- Days to Ship: 1 Day(s) or more -
Craft Form Plus Chisel Screwdriver
WERA
[Features]
· A strike type through screwdriver.
· Equipped with a bolster that can be firmly tightened with a wrench, etc.
· Special grip design provides an easy grip and comfortable fit.- Volume Discount
Standard Price: MYR 78.76- Days to Ship: 8 Day(s) -
WERA
[Features]
· Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.- Volume Discount
Standard Price: MYR 43.95- Days to Ship: 8 Day(s) -
WERA
[Features]
· Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
· This product conforms to European Standard EN100-015-1.- Volume Discount
Standard Price: MYR 51.13- Days to Ship: 8 Day(s) or more -
Craft Form Stainless Steel Screwdriver
WERA
[Features]
· Special grip design provides an easy grip and comfortable fit.- Volume Discount
Standard Price: MYR 66.78- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HOZAN | TONE | TONE | TONE | VESSEL | VESSEL | HOZAN | HOZAN | TONE | VESSEL | VESSEL | VESSEL | VESSEL | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | SUNFLAG | HIRAI KOGU | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | WERA | WERA | WERA | WERA | WERA | WERA |
| Product Series | Slit power screwdriver (electric type/through/magnet included) | Strong Square Pass-Through Shank Screwdriver (Pass-Through, Magnetic) | |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 1 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 1 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more |
| Tip standards | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) |
| Tip size / Phillips (+) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip size / flathead (-) blade width (mm) B1 | 0.9 ～ 2.6 | 3 | 4.9 | 9 | 4 | 6 | 2 | 6 | 6 | 2.5 | 6 ～ 8 | 6 | 7 | 2.6 ～ 5.5 | 1.6 | 3 ～ 5.5 | 3 ～ 4 | 6 | - | 2 | 2 | 5.5 ～ 8 | 5.5 ～ 8 | 5.5 ～ 6 | 5.5 ～ 6 | 6 | 9.5 ～ 11 | 1.8 ～ 3 | - | - | 10 | 6 ～ 6.3 | 6.3 | 6 ～ 8 | 18 | 6 | 4.3 | 5.5 ～ 8 | 6 | 5 ～ 12 | 3.5 ～ 10 | 3.5 ～ 14 | 0.8 ～ 4 | 1.2 ～ 4 | 3 ～ 10 |
| Shaft length L (mm) | - | 50 | 76 | 153 | 100 | 100 ～ 150 | 100 | 100 ～ 150 | 102 | 50 | 150 | 100 ～ 150 | 100 | 50 ～ 100 | 30 | 75 ～ 100 | 80 | 225 ～ 275 | 28 | 16 ～ 24 | 100 ～ 150 | 75 ～ 150 | 75 ～ 150 | 75 ～ 200 | 75 ～ 150 | 35 | 150 ～ 200 | 50 ～ 75 | - | - | - | 100 ～ 250 | 100 ～ 200 | 100 ～ 150 | 75 | 95 | 200 | 75 ～ 150 | - | 100 ～ 250 | 75 ～ 175 | 80 ～ 250 | 40 ～ 100 | 40 ～ 80 | 80 ～ 200 |
| Single Product/Set Classification | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item |
| Shaft type | Round | Round | Square | Square | Round | Round | Round | Round | Square | Round | Round | Round | Square | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Square | Round | Round | Square | Square | Round | Round | Round | - | Round | Square | Round | Round | Round | Round |
| Magnet | NA | NA | Available | Available | Available | Available | NA | Available | Available | Available | Available | Available | Available | NA | NA | NA | NA | Available | NA | NA | NA | Available | Available | Available | Available | Available | NA | NA | NA | NA | NA | Available | Available | Available | NA | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA |
| Shaft through | - | NA | Available | Available | NA | NA | NA | NA | Available | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | Available | NA | Available | NA | NA | NA | - | NA | NA | Available | NA | - | NA | Available | - | NA | NA | Available | NA | NA | NA |
| Bolster | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Included | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | Included | NA | Included | - | NA | Included / NA | Included / NA | NA | NA | NA |
| Grip Type | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Rubber | Resin | Resin | Rubber | Rubber | Resin | Resin | Resin | Resin | Rubber | Rubber | Resin | Resin | Resin | Rubber | Rubber | Rubber | Rubber | Resin | Resin | Resin | Resin | Resin | - | Rubber | Rubber | Resin | Resin | Rubber | - | Rubber | Resin | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber |
| Tip size / flathead (-) blade thickness (mm) B2 | 0.4 | 0.4 | 0.6 | 1 | 0.45 | 0.9 | 0.5 | 1 | 0.8 | 0.35 | 0.9 ～ 1.1 | 0.9 | 1.5 | 0.35 ～ 0.7 | 0.3 | 0.35 ～ 0.7 | 0.4 ～ 0.5 | 0.8 | - | 0.5 | 0.5 | - | - | - | - | - | - | - | - | - | 1.6 | 0.8 ～ 0.9 | 0.8 | 0.9 ～ 1.1 | 1.6 | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.0, 1.2, 1.6
- 1.2
- 1.2、1.8、2.3
- 1.2、1.8、2.4、3.0
- 1.3
- 1.35
- 1.4
- 1.4, 2.0, 2.4
- 1.5
- 1.5, 2.0, 3.0
- 1.6
- 1.8
- 1.9
- 1.95
- 2
- 2.1
- 2.3
- 2.4
- 2.5
- 2.5、3.0、4.0
- 2.6
- 2.65
- 3
- 3, 5, 6
- 3.1
- 3.4
- 3.5
- 3.6
- 4
- 4 × 6
- 4.3
- 4.5
- 4.5, 5.5, 7.0
- 4.5、6.0
- 4.7
- 4.9
- 5
- 5.5
- 6
- 6.25
- 6.3
- 6.35
- 6.5
- 7
- 7, 9, 12
- 7.2
- 8
- 8, 9, 10, 12, 14
- 9
- 9, 11
- 9.5
- 10
- 11
- 12
- 13
- 14
- 16
- 18
- 30
- 100
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 80~150
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- VESSEL (43)
- PB SWISS TOOLS (26)
- KTC(KYOTO TOOL) (20)
- TRUSCO NAKAYAMA (17)
- ANEX (16)
- ENGINEER (15)
- TONE (14)
- HOZAN (12)
- WERA (10)
- ARC (6)
- HIRAI KOGU (6)
- SK 11 (5)
- WIHA (5)
- SIGNET (2)
- TOP (2)
- ARC GREATTOOL (1)
- BONDHUS (1)
- E VALUE (1)
- FUJIYA (1)
- HAZET (1)
- Ｍ＆Ｍ (1)
- SUNFLAG (1)
- ESCO (0)
- MITOLOY (0)
- TAKAGI (0)
- HIOS (0)
- SMATO (0)
- TGK (0)
- SUEKAGE TOOL (0)
- TRAD (0)
- BESTTOOL (0)
- HANDIWORK (0)
- AS ONE (0)
- EIGHT TOOL (0)
- WILLIAMS (0)
- KO-KEN TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy