Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Dial Gauges（Scale type：Balance Scale）

Dial gauges are measuring instruments that can accurately measure minute lengths and displacements. Unlike other measuring instruments that directly measure numerical values, they are used for measuring the difference compared to a reference or correcting parallelism. Dial gauges are available in various types, including a standard type and lever type. The standard type uses gears and a lever to convert the linear motion of a spindle into rotational motion, mechanically expand this motion and indicate the displacement with a scale. They are suited to observing significant changes. The lever-type uses sector gears and crown gears to expand the motion. While the lever-type has a higher resolution than the standard type, the variation is converted into the rotational motion of the lever, so a big change may be indicated with a smaller figure than the actual number. A single reading of a standard-type dial gauge is 0.01 mm, but there are also special dial gauges with a single reading of 0.001 mm. In addition to an analog type where measurements are read on a scale, a digital type is available as well.

30 items

: 30; 45; 60

Days to Ship	All 1 Day(s) or Less 4 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 14 Day(s) or Less

Dial Gauge, New Pic-test (No Clutch Type, PCN Type)

OZAKISEISAKUJO

[Features]
· No-latch type with a lever-type dial gauge lacking the most general switching lever.
· The pointer continually rotates clockwise in accordance with the upward and downward movement of the gauge head, improving measurement efficiency for a wide range of applications.
· Select from 0.01 mm, 0.002 mm, or 0.001 mm types.
· Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.
· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.

Volume Discount

Standard Price:	MYR 505.09-
Days to Ship:	4 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Dial Gauge, Dial comparator (Point Measuring Instrument)

MAHR

[Features]
·Innovative scale panel design.
·In order to improve repeatability and durability, rubies are used for all internal friction parts.
·The measuring spindle uses a patented special bearing.
·The shock prevention mechanism automatically disconnects the mechanism when the measurement range is exceeded to prevent failure.
·A long-selling product that was developed and sold 70 years ago.
·Large, high-contrast dial.
·Adjustable Tolerance Marker.
·Lock type fine adjustment screw.
·Both the mounting shank and measuring spindle are made of hardened stainless steel.
·Insensitive to lateral forces (lateral play) acting as a measuring spindle.
·Maximum sensitivity and accuracy are ensured only by excellent travel performance and the use of precision gears and pinions.
·The measuring spindle can be retracted with either a cable release screw or a lift knob.
[Applications]
·1µm, 0.5µm precision measurement.
·Precision machined product manufacturing field.
·Precision equipment manufacturing and automobile parts manufacturing fields.

Standard Price:	MYR 1,896.65-
Days to Ship:	8 Day(s)

"Same Day Ship Out" is available for item with 1 day

Dial Gauge, Indicating Micrometer

MAHR

[Features]
· With lock function.
· It comes with a thermal insulation cover.
· Capable of comparative measurements in 1 µm increments, impossible with micrometers.
· Stable measurement is possible by adopting a 1003 Millimess dial gauge.
· A high-quality configuration suitable for high-precision measurement that can detect errors at a 1 μm level.
[Applications]
· For the measurement of precision components that require high precision.

Standard Price:	MYR 7,283.13-
Days to Ship:	8 Day(s)

"Same Day Ship Out" is available for item with 1 day

Lever Type Dial Gauge

MAHR

[Features]
· Fixing bracket (shank) removable structure allows the position to be freely changed.
· Wear-resistant artificial gems are used for the entire internal shaft.
· There are 2 mounting shafts, 6 mm and 8 mm, which can be removed.
· Vibration-proof structure.
· A structure in which the pointer's cover glass can be removed, eliminating time spent repairing any damage to the glass.
· Fixing bracket (shank) removable structure enables work that originally required multiple units to be done with a single unit, making it highly economical.
[Applications]
· General molding industry.
· Research and development work.

Standard Price:	MYR 634.63-
Days to Ship:	8 Day(s)

"Same Day Ship Out" is available for item with 1 day

Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)

OZAKISEISAKUJO

The most widely used dial gauge with scale intervals of 0.001/0.005 mm. Select from a wide range of devices to suit the application.

[Features]
· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.
· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.
· Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.
· Limit stickers are included as standard with all models.

Volume Discount

Standard Price:	MYR 533.18-
Days to Ship:	6 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Dial Gauge, Pictest (Switch Lever Type, PC Series)

OZAKISEISAKUJO

[Features]
· Lever-type dial gauge with switch lever.
· Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.
· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.
· The gauge damage prevention probe is provided on all models.
· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.

Volume Discount

Standard Price:	MYR 437.66-
Days to Ship:	4 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Lever Test (Lever Swap Type)

TECLOCK

Lever Test
Features]
Since the probe and pointer are nonmagnetic, they are not affected by magnetism.
The probe can be set at an angle of 200° arc.
[Specifications]
Maximum Measurement Length (Range Selection):0-1mm
Scale type:Balanced Scale
Mounting shaft diameter:6mm
Measured force:0.4N or less
[Application]
For various measurements such as outside, inside, inside the groove, centering.

Volume Discount

Standard Price:	MYR 526.06-
Days to Ship:	8 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Surface Dial, New Peak Test (D Series)

OZAKISEISAKUJO

[Features]
· The display is enlarged by approximately 30% for better visibility.
· The long stem (screw-in type) has been standardized.
· Select from 0.01 mm, 0.002 mm, or 0.001 mm types.
· The gauge damage prevention probe is provided on all models.
· D type in which the display can be seen clearly even from a distance.
· Surface diameter φ46.5.
· Easy to read the minimum display.

Volume Discount

Standard Price:	MYR 566.34-
Days to Ship:	6 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

New Pic-Test (without Stem, V-Series)

OZAKISEISAKUJO

Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.

Volume Discount

Standard Price:	MYR 584.37-
Days to Ship:	6 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Pic Test for Low Pressure (E Series)

OZAKISEISAKUJO

[Features]
· Lever-type dial gauge with super low pressure measuring force (0.05 N / 0.1 N).
· No-clutch type (PCN) and switching lever type (PC) are available as a selection of 0.01 mm or 0.002 mm options.
· Uses a green scale plate that is easy on the eyes.
· Highly sensitive, enabling measurement at low measurement power.
· The gauge damage prevention probe is provided on all models.
· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.
· Try it out if you are having trouble with errors due to the effects of measuring force

Volume Discount

Standard Price:	MYR 448.90-
Days to Ship:	6 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Pointer Less than One Rotation New Pick Test (Z Series)

OZAKISEISAKUJO

[Features]
· Miniature bearings are used in the fulcrum portion of the gauge heads to realize excellent durability and sensitivity.
· Bearing jewel used in all bearings provides outstanding indicating sensitivity.
· An O-ring is used for the rotating part of the external frame, providing reinforced oil resistance.
· It has a measurement probe and a groove to prevent gauge damage, so even if force is applied in a horizontal direction, the probe will break at the grooved point, and the gauge body is protected.
· Because it is a no-clutch type, an auto-reverse rotation operating method is adopted so that the indicating needle always rotates clockwise, whether movement is forward or backward.
· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.

Volume Discount

Standard Price:	MYR 506.67-
Days to Ship:	6 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Ruby Measurement Probe

NIIGATASEIKI

A non-conductive dial indicator that allows for easy measurements in narrow and deep spaces.
[Features]
· Includes inspection report.
· A ruby is embedded in the measurement probe.
· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.
· Uses jewel bearings for each of the bearings, ensuring excellent accuracy and durability.
· The round ruby probe provides excellent abrasion resistance and does not conduct electricity or become magnetically charged.
· Uses a green scale plate for improved visibility.
[Applications]
· Inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.

Standard Price:	MYR 642.16-
Days to Ship:	11 Day(s)

"Same Day Ship Out" is available for item with 1 day

Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Carbide Measurement Probe

NIIGATASEIKI

An abrasion-resistant type dial indicator that allows for easy measurements in narrow and deep spaces.
[Features]
· Includes inspection report.
· Features carbide measurement probes.
· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.
· Uses jewel bearings for each of the bearings, ensuring excellent accuracy and durability.
· The round carbide probe boasts high abrasion-resistance and high levels of hardness and so will not scratch easily. It also has a low thermal expansion coefficient.
· Uses a green scale plate for improved visibility.
[Applications]
· Inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.

Standard Price:	MYR 650.85-
Days to Ship:	11 Day(s)

"Same Day Ship Out" is available for item with 1 day

Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations)

NIIGATASEIKI

A handy dial gauge for measuring unevenness and straightness, etc., in tight spaces where use of typical dial gauges is not possible.
[Features]
· Includes inspection report.
· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.
· Uses jewel bearings for each of the bearings.
· Uses a green scale plate for improved visibility.
· Lever-type dial gauge.
· The main body is made of steel.
[Applications]
· Used for inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.

Volume Discount

Standard Price:	MYR 434.68-
Days to Ship:	9 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Dial test indicator

SINWASOKUTEI

A dial test indicator for measuring flatness, parallelism and eccentricity.
[Features]
· Includes two convenient stem types.
· The stem attached to the dovetail groove can be used to retain magnetic stands.

Standard Price:	MYR 524.45
Days to Ship:	8 Day(s)

"Same Day Ship Out" is available for item with 1 day

Lever Test (Auto Clutch)

TECLOCK

[Features]
· It has improved sensitivity for dimensional displacement compared to a dial gauge.
· The probe and indicator are made from non-magnetic materials, so they are not influenced by the magnetic force.
· Using an auto-clutch mechanism without a switching lever, the measuring direction is switched automatically between forward and reverse.
· The probe can be set to an arc angle of 220°.
[Applications]
· For measuring the exterior, interior, grooves and finding the center.

Volume Discount

Standard Price:	MYR 497.93-
Days to Ship:	8 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Stone Dial Comparator

OBISHIKEIKI

[Features]
· Equipped with a fine motion mechanism that makes it easy to move a very small dial gauge.
· The base was manufactured using high quality black gabbro.
· Minimal secular change and temperature fluctuations, with excellent hardness and wear resistance.

Standard Price:	MYR 4,745.28-
Days to Ship:	21 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Pointer Less Than One Rotation Dial Gauge

OZAKISEISAKUJO

[Features]
· Dial gauge with scale intervals of 0.01 mm/0.001 mm and a pointer with less than one full rotation.
· The rotation of the pointer is kept to less than 1 turn in order to prevent misreading.
· Choose from an abundance of device models for the dedicated relative measurement dial

Volume Discount

Standard Price:	MYR 241.90-
Days to Ship:	4 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Compact Dial Gauge (Measurement Range 1 to 5 mm)

OZAKISEISAKUJO

Compact dial gauge with small surface diameter. Does not take up space for multipoint measurement or mounting to a jig, etc.

Volume Discount

Standard Price:	MYR 280.33
Days to Ship:	4 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

New Pic Test for Low Pressure (E Series)

OZAKISEISAKUJO

Volume Discount

Standard Price:	MYR 582.52-
Days to Ship:	4 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Pictest (Double Sided Type, W Series)

OZAKISEISAKUJO

A double-sided lever type dial gauge that is very useful for work piece centering measurement. It is provided with a gauge damage prevention measurement probe. By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.

Standard Price:	MYR 893.37
Days to Ship:	6 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Pictest (without Stem, V Series)

OZAKISEISAKUJO

Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.

Volume Discount

Standard Price:	MYR 480.20-
Days to Ship:	6 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Non-Magnetic/Non-Energization New Pic-Test (U Series)

OZAKISEISAKUJO

[Features]
· Gauge heads and pointers are non-magnetic, so they are not affected by magnetic environments.
· The use of ceramic stems achieves non-conductivity, allowing use in electric discharge machines, etc.
· Easy to read light blue scale.
· Select from 0.01 mm, 0.002 mm, or 0.001 mm types.
· The gauge damage prevention probe is provided on all models.
· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.
· Improved abrasion resistance with a probe with a ruby ball.

Standard Price:	MYR 640.56-
Days to Ship:	4 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Dial Inside Gauge Replacement Lot for U Series

OZAKISEISAKUJO

A replacement rod for use with the U Series Dial Inside Gauge.

[Features]
· Ideal for measuring the internal diameters of relatively large holes and internal wall surfaces.

Standard Price:	MYR 1,792.42
Days to Ship:	6 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Dial Inside Gauge

OZAKISEISAKUJO

Ideal for measuring the internal diameters of relatively large holes and internal wall surfaces.

Standard Price:	MYR 898.09-
Days to Ship:	11 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Upright Dial Gauge

OZAKISEISAKUJO

[Features]
· Ideal for dimensional inspection of precision parts, thickness measurement of experimental samples, rubber, leather, cloth and plastic products.
· Since the table can be moved vertically, it is easy to set up the objects to be measured.
· We manufacture various products such as rubber, leather, urethane, film, etc. using a constant pressure thickness measuring weight assembly method conforming to JIS standards

Standard Price:	MYR 1,598.05-
Days to Ship:	6 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Pic-Test New Pic-Test PC/PCN

OZAKISEISAKUJO

Improved abrasion resistance with a probe with a ruby ball.

Volume Discount

Standard Price:	MYR 618.56-
Days to Ship:	12 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Ruby Measurement Probe

NIIGATASEIKI

Volume Discount

Standard Price:	MYR 462.99-
Days to Ship:	10 Day(s) or more

"Same Day Ship Out" is available for item with 1 day

Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Carbide Measurement Probe

NIIGATASEIKI

Volume Discount

Standard Price:	MYR 462.99-
Days to Ship:	11 Day(s)

"Same Day Ship Out" is available for item with 1 day

Standard Dial Gauge (Graduations: 0.001 mm)

NIIGATASEIKI

Standard model dial gauge with 0.001‑mm graduations and excellent abrasion resistance.
[Features]
· The most common type of dial gauge with 0.001‑mm graduations. Built-in limit indicator.
· Features an O-ring sealed between the inner and outer lid to prevent water and oil entering.
· Uses jewel bearings.
· Uses a green scale plate for improved visibility.
· Flat-type back and center-lug back lid included.
· Carbide probe.
[Applications]
· Measuring surface flatness and checking tool set ups.
· Used for measuring axial runout, checking squareness, etc.

Volume Discount

Standard Price:	MYR 508.16
Days to Ship:	4 Day(s) or more

"Same Day Ship Out" is available for item with 1 day


Brand
Product Series
Days to Ship
Application
Scale interval minimal display(mm)
Display Method
Maximum Measurement Length (Range Selection)(mm)
Waterproof Function
Output terminal for measuring data: with or without
Scale type
Calibration Certificate


Brand	OZAKISEISAKUJO	MAHR	MAHR	MAHR	OZAKISEISAKUJO	OZAKISEISAKUJO	TECLOCK	OZAKISEISAKUJO	OZAKISEISAKUJO	OZAKISEISAKUJO	OZAKISEISAKUJO	NIIGATASEIKI	NIIGATASEIKI	NIIGATASEIKI	SINWASOKUTEI	TECLOCK	OBISHIKEIKI	OZAKISEISAKUJO	OZAKISEISAKUJO	OZAKISEISAKUJO	OZAKISEISAKUJO	OZAKISEISAKUJO	OZAKISEISAKUJO	OZAKISEISAKUJO	OZAKISEISAKUJO	OZAKISEISAKUJO	OZAKISEISAKUJO	NIIGATASEIKI	NIIGATASEIKI	NIIGATASEIKI
Product Series	Dial Gauge, New Pic-test (No Clutch Type, PCN Type)	Dial Gauge, Dial comparator (Point Measuring Instrument)	Dial Gauge, Indicating Micrometer	Lever Type Dial Gauge	Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)	Dial Gauge, Pictest (Switch Lever Type, PC Series)	Lever Test (Lever Swap Type)	Surface Dial, New Peak Test (D Series)	New Pic-Test (without Stem, V-Series)	Pic Test for Low Pressure (E Series)	Pointer Less than One Rotation New Pick Test (Z Series)	Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Ruby Measurement Probe	Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Carbide Measurement Probe	Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations)	Dial test indicator	Lever Test (Auto Clutch)	Stone Dial Comparator	Pointer Less Than One Rotation Dial Gauge	Compact Dial Gauge (Measurement Range 1 to 5 mm)	New Pic Test for Low Pressure (E Series)	Pictest (Double Sided Type, W Series)	Pictest (without Stem, V Series)	Non-Magnetic/Non-Energization New Pic-Test (U Series)	Dial Inside Gauge Replacement Lot for U Series	Dial Inside Gauge	Upright Dial Gauge	Pic-Test New Pic-Test PC/PCN	Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Ruby Measurement Probe	Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Carbide Measurement Probe	Standard Dial Gauge (Graduations: 0.001 mm)
Days to Ship	4 Day(s) or more	8 Day(s)	8 Day(s)	8 Day(s)	6 Day(s) or more	4 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	11 Day(s)	11 Day(s)	9 Day(s) or more	8 Day(s)	8 Day(s) or more	21 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	11 Day(s) or more	6 Day(s) or more	12 Day(s) or more	10 Day(s) or more	11 Day(s)	4 Day(s) or more
Application	Lever Type (Indicator)	Standard Type	Thickness type	Lever Type (Indicator)	Standard Type	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Dial Gauge Stand	Standard Type	Standard Type	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Lever Type (Indicator)	Standard Type	Standard Type	Dial Gauge Stand	Standard Type	Lever Type (Indicator)	Lever Type (Indicator)	Standard Type
Scale interval minimal display(mm)	0.001 ～ 0.01	0.0005 ～ 0.001	0.001	0.002 ～ 0.01	0.001	0.002 ～ 0.01	0.002 ～ 0.01	0.001 ～ 0.01	0.001 ～ 0.01	0.01	0.002 ～ 0.01	0.002	0.002	0.01	0.01	0.001 ～ 0.01	-	0.001 ～ 0.01	0.01	0.002 ～ 0.01	0.01	0.002 ～ 0.01	0.001 ～ 0.01	0.01	0.01	0.01	0.01	0.01	0.01	0.001
Display Method	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial	Dial
Maximum Measurement Length (Range Selection)(mm)	0–1 ～ 1.1 to 5	0–1	21 to 50	0–1	0–1 ～ 1.1 to 5	0–1	0–1	0–1	0–1	0–1	0–1	0–1	0–1	0–1	0–1	0–1	6~20	0–1	1.1 to 5	0–1	0–1	0–1	0–1	101 or More	51 to 100	6~20	0–1	0–1	0–1	0–1
Waterproof Function	Available	-	-	-	Available	Available	-	-	Available	-	-	NA	NA	NA	NA	-	-	-	-	-	-	Available	-	-	-	-	NA	NA	NA	NA
Output terminal for measuring data: with or without	-	-	-	-	-	-	-	-	-	-	-	NA	NA	NA	NA	-	-	-	-	-	-	-	-	-	-	-	NA	NA	NA	NA
Scale type	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale	Balance Scale
Calibration Certificate	-	-	-	-	-	-	-	-	-	-	-	No	No	No	-	-	-	-	-	-	-	-	-	-	-	-	-	No	No	No