(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Chamfer, V-Grooves（Application：V Groove）
[What is a chamfering tool?]
A tool for chamfering of drill holes, etc., which is used for removing burrs on the hole's surface. There are end mills for chamfering, chamfering cutters, inner radius cutters, etc., depending on the application.
| Days to Ship |
|
|---|
-
Carbide Solid Chamfering Endmill 3-Flute
DIXI
High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.
Standard Price: MYR 305.41- Days to Ship: 11 Day(s) -
TS coated carbide chamfer, V grooving end mill, 2-flute
MISUMI
[Features]
·Ideal for chamfering and V-groove
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: MYR 334.04- Days to Ship: 4 Day(s) or more -
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
MISUMI
Ideal for the Deep Chamfering of Workpieces
- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: MYR 378.94- Days to Ship: 4 Day(s) or more -
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
- Volume Discount
Standard Price: MYR 264.85- Days to Ship: 4 Day(s) or more -
2-flute Spiral Chamfering Cutter FX-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
- Volume Discount
Standard Price: MYR 521.16- Days to Ship: 5 Day(s) or more -
2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
- Volume Discount
Standard Price: MYR 478.96- Days to Ship: 5 Day(s) or more -
2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.
- Volume Discount
Standard Price: MYR 559.14- Days to Ship: 7 Day(s) or more -
3-flute Chamfering Cutter (negative type) HSCT-N
OSG
End mill for negative type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.
- Volume Discount
Standard Price: MYR 431.61- Days to Ship: 7 Day(s) or more -
3-flute Chamfering Cutter (positive type) HSCT-P
OSG
End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.
- Volume Discount
Standard Price: MYR 433.60- Days to Ship: 7 Day(s) or more -
3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N
OSG
Negative type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.
- Volume Discount
Standard Price: MYR 462.24- Days to Ship: 11 Day(s) or more -
3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P
OSG
Positive type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.
- Volume Discount
Standard Price: MYR 462.24- Days to Ship: 9 Day(s) or more -
FUKUDA
A single product capable of five types of machining: center positioning, chamfering, side surface machining, drilling, and V-grooving.
Standard Price: MYR 299.83- Days to Ship: 6 Day(s) or more -
SAGCCC AS Coated Carbide Center for Chamfering
SANKO MFG
Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.
Standard Price: MYR 447.37- Days to Ship: 7 Day(s) or more -
GCCC, Carbide Center for Chamfering
SANKO MFG
[Features]
· Melding the design concepts of endmills and drills, it is available for a wide range of applications.
· Double angle adopted for the chamfer part.
· Provides a clean finish with fewer burrs.Standard Price: MYR 362.30- Days to Ship: 7 Day(s) or more -
SANKO MFG
Center chamfering cutter used in a large variety of different applications.
[Features]
· As the outer diameter and shank have the same diameter, interference with the workpiece can be avoided.
· Used in a large variety of different applications.Standard Price: MYR 198.72- Days to Ship: 7 Day(s) or more -
IWATA TOOL
Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.
Standard Price: MYR 419.85- Days to Ship: 9 Day(s) or more -
Toglon Sharp SP 60° Carbide DLC Coating
IWATA TOOL
Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.
Standard Price: MYR 760.73- Days to Ship: 10 Day(s) or more -
IWATA TOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.Standard Price: MYR 309.13- Days to Ship: 9 Day(s) or more -
Toglon Sharp SP 90° Carbide DLC Coating
IWATA TOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.Standard Price: MYR 462.95- Days to Ship: 4 Day(s) or more -
Toglon Sharp SP 90° Carbide Long Type
IWATA TOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.Standard Price: MYR 507.00- Days to Ship: 11 Day(s) or more -
Toglon Sharp SP 90° Carbide Long Type DLC Coating
IWATA TOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.Standard Price: MYR 824.35- Days to Ship: 11 Day(s) -
Toglon Sharp SP 60° ALD Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.Standard Price: MYR 516.11- Days to Ship: 9 Day(s) or more -
Toglon Hard SP 90° ALD Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.Standard Price: MYR 412.61- Days to Ship: 9 Day(s) or more -
Toglon Miniature Hard SP 90° ALT Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.Standard Price: MYR 439.30- Days to Ship: 14 Day(s) -
SVM Chamfering Mill, Non-Coated
OKAZAKI SEIKO
In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.
- Volume Discount
Standard Price: MYR 348.85- Days to Ship: 9 Day(s) or more -
SVMA Chamfering Mill, OK Coated
OKAZAKI SEIKO
In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.
- Volume Discount
Standard Price: MYR 436.48- Days to Ship: 9 Day(s) -
Standard Price: MYR 397.83- Days to Ship: 5 Day(s) or more -
SPEED TIGER
[Features]
· Blade diameters φ10 or less are high rigidity types with thick shank diameter.
· A high-lubricity AlTiN coated tool that is ideal for soft materials with a hardness of HRC 45 or less, such as raw materials or stainless steel. Handy to have one in a magazine rack.Standard Price: MYR 186.88- Days to Ship: 6 Day(s) or more -
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
[Features]
· 90° Carbide 2-Flute Chamfering V-Grooving End Mill
· Use for V-grooving, horizontal chamfering, centering, hole chamfering.
· Nanoparticle Multilayer Coating
· Excellent lubricity and abrasion resistance.
· Suitable for a wide range of work materials from general steel to aluminum.- Volume Discount
Standard Price: MYR 190.09- Days to Ship: 5 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Standard Price: MYR 456.66- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Standard Price: MYR 456.66- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Standard Price: MYR 613.06- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Standard Price: MYR 613.06- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Standard Price: MYR 548.20- Days to Ship: 11 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Standard Price: MYR 548.20- Days to Ship: 11 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Standard Price: MYR 655.81- Days to Ship: 7 Day(s) or more -
Carbide V Cut End Mill Long Type Coated Series AMVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Standard Price: MYR 655.81- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 499.25- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 499.25- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 580.27- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 580.27- Days to Ship: 11 Day(s) or more -
THE_CUT
[Features]
· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.
· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.
· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.Standard Price: MYR 531.31- Days to Ship: 5 Day(s) or more -
Double Sided Chamfering Cutter 45° DFC
THE_CUT
[Features]
· Capable of V-grooving both front and back surfaces as well as the side surfaces.
· Capable of chamfering up to C2.8 for front chamfering.
· The use of a dedicated insert (4 cutting edges) delivers high precision machining.Standard Price: MYR 1,200.20- Days to Ship: 11 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | DIXI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | FUKUDA | SANKO MFG | SANKO MFG | SANKO MFG | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | OKAZAKI SEIKO | OKAZAKI SEIKO | DIJET | SPEED TIGER | 7 LEADERS | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | THE_CUT | THE_CUT |
| Product Series | TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | 2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC | 3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N | 3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90° | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120° | ||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||
| Days to Ship | 11 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 11 Day(s) | 9 Day(s) or more | 9 Day(s) or more | 14 Day(s) | 9 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | - | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | - |
| Tool Diameter (D)(mm) | 2 ～ 12 | 3 ～ 16 | 3 ～ 12 | 3 ～ 12 | 0.8 ～ 1 | 0.8 ～ 1 | 0.8 ～ 1 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 4 ～ 40 | 3 ～ 20 | 3 ～ 20 | 6 ～ 32 | 1.2 ～ 16 | 1.2 ～ 16 | 1.2 ～ 16 | 1.2 ～ 16 | 3 ～ 12 | 3 ～ 12 | 0.6 ～ 4 | 0.6 ～ 4 | 0.1 ～ 1.5 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 0.5 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 3 ～ 16 | 11 ～ 20 |
| Tip angle (θ) | 90 | 60 ～ 120 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 60 ～ 120 | - | - | - | 60 | 60 | 90 | 90 | 90 | 90 | 60 | 90 | 90 | 90 ～ 120 | 90 ～ 120 | 60 ～ 120 | 90 | 90 | 90 | 120 | 90 | 120 | 90 | 120 | 90 | 120 | 90 | 120 | 90 | 120 | 90 ～ 120 | - |
| Application | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove | V Groove |
| work material | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[○] | Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | general steel[○] / Cast Iron[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Aluminum[○] / Copper[○] / Resin[○] | Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Quenched and tempered steel[○] / high hardness steel[○] | Quenched and tempered steel[○] / high hardness steel[○] | Quenched and tempered steel[○] / high hardness steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] |
| Single blade, two blades | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | - | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Double-edged | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - |
| Peripheral Blade Y/N | - | NA | Available | Available | NA | NA | NA | NA | NA | NA | NA | Available | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available | - | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coating Y/N | Available | Available | Available | Available | Available | NA | Available | NA | NA | NA | NA | NA | Available | NA | NA | NA | Available | NA | Available | NA | Available | Available | Available | Available | NA | Available | NA | Available | Available | NA | NA | Available | Available | NA | NA | Available | Available | NA | NA | Available | Available | Available | - |
| Coating Type | TiAlN | TS | TS | AlCrN | TiAlN | Non-Coated | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | Non-Coated | Non-Coated | - | DLC | - | DLC | - | DLC | Other | Other | ALT | Non-Coated | TiAlN | Non-Coated | Other | Other | - | - | TiAlN | TiAlN | - | - | TiAlN | TiAlN | - | - | TiAlN | TiAlN | TiAlN | - |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.1
- 0.2
- 0.3
- 0.3, 0.6
- 0.4
- 0.5
- 0.5, 1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1, 2
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.4
- 2.5
- 2.6
- 2.8
- 3
- 3.2
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.2
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.4
- 7.5
- 7.6
- 7.8
- 8
- 8.2
- 8.4
- 8.5
- 8.8
- 9.4
- 10
- 10.4
- 10.8
- 11
- 11.4
- 12
- 12.4
- 13
- 13.4
- 14
- 14.4
- 15
- 15.4
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 25
- 26
- 30
- 31
- 32
- 35
- 36
- 40
- 45
- 46
- 50
- 55
- 60
- 65
- 66
- 70
- 75
- 80
- 90
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 1.5
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
- 2
- 2, 3
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3.25
- 3.5
- 3.75
- 4
- 4.25
- 4.5
- 4.75
- 5
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
Narrow search by specifying Manufacturer
-
- MAKOTOLOY (12)
- IWATA TOOL (9)
- OSG (7)
- SANKO MFG (3)
- OKAZAKI SEIKO (2)
- THE_CUT (2)
- 7 LEADERS (1)
- DIJET (1)
- DIXI (1)
- FUKUDA (1)
- SPEED TIGER (1)
- DAISHOWASEIKI (0)
- FUJIGEN (0)
- NS TOOL (0)
- UNION TOOL (0)
- DAIICHITOOL (0)
- STAR-M (0)
- MAPAL (0)
- EIKOSHA (0)
- GUHRING (0)
- SANDVIK (0)
- NOGA_JAPAN (0)
- TAIYO-TOOL (0)
- KYOWA SEIKO (0)
- ASAHI TOOLS (0)
CAD
-
- 2D
- 3D
Related Categories to Chamfer, V-Grooves
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy