(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Chamfering / Centering Tools（Coating Y/N：Available Page4）
Search by specifying the lower class category
Centering/Countersink
Chamfer, V-Grooves
Inner R
Replaceable Blade Type Chamfering Tools/Tips/Blades
| Days to Ship |
|
|---|
-
Milling Cutter for 60° Chamfering Type N 6711
GUHRING
Taper half-angle 30° chamfering milling cutter.
Standard Price: MYR 202.63- Days to Ship: 8 Day(s) -
Milling Cutter for 90° Chamfering Type N 6713
GUHRING
Taper half-angle 45° chamfering milling cutter.
Standard Price: MYR 212.70- Days to Ship: 5 Day(s) or more -
GUHRING
[Features]
· Allows simultaneous centering and chamfering.
· Use of FIRE coating achieves a longer life while enabling high speed cutting.- Volume Discount
Standard Price: MYR 104.30- Days to Ship: 9 Day(s) or more -
GUHRING
Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.
Standard Price: MYR 420.00- Days to Ship: 9 Day(s) or more -
GUHRING
Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.
- Volume Discount
Standard Price: MYR 127.87- Days to Ship: 5 Day(s) or more -
GUHRING
Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.
Standard Price: MYR 420.00- Days to Ship: 6 Day(s) or more -
Straight Shank, Countersink 3-Flute 90° 1326
GUHRING
[Features]
· Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.
· Using A coating achieves a longer life.Standard Price: MYR 185.48- Days to Ship: 6 Day(s) or more -
Straight Shank, Countersink 3-Flute 90° 327
GUHRING
Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter. Long product life with TiN coating.
Standard Price: MYR 162.95- Days to Ship: 5 Day(s) or more -
Straight Shank, Countersink 3-Flute, 90° (Set of 327) 499
GUHRING
[Features]
· 6-piece set of 327.
· Steel case provided.Standard Price: MYR 2,029.13 Days to Ship: 11 Day(s) -
NC Starting Drills for Chamfering (90°), Coated_NC-SD-V
YAMAWA MFG
A drill for chamfering the end face after drilling with a drill.
[Features]
· Adopts cobalt high-speed steel with excellent wear resistance.
[Applications]
· By using NC-SD V, larger than the diameter after hole drilling, cleanly-finished chamfered surfaces can be achieved.- Volume Discount
Standard Price: MYR 85.93- Days to Ship: 5 Day(s) or more -
Long Shank Point Drills 60°, Coated_PE-SL-V
YAMAWA MFG
The 2 angles, 125° tip angle and 60° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
- Volume Discount
Standard Price: MYR 314.35- Days to Ship: 5 Day(s) or more -
Point Drills 60°, Coated_PE-S-V
YAMAWA MFG
The 2 angles, 125° tip angle and 60° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
- Volume Discount
Standard Price: MYR 147.40- Days to Ship: 5 Day(s) or more -
Point Drills 90°, Coated_PE-Q-V
YAMAWA MFG
The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
- Volume Discount
Standard Price: MYR 147.48- Days to Ship: 5 Day(s) or more -
Joint- Point Drills 90°, Coated_JO-PEQ-V
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: TiCN
· Tool material: HSS
[Applications] Centering (positioning) / hole chamfering- Volume Discount
Standard Price: MYR 190.22- Days to Ship: 9 Day(s) or more -
Long Shank Point Drills 90°, Coated_PE-QL-V
YAMAWA MFG
The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
- Volume Discount
Standard Price: MYR 298.38- Days to Ship: 5 Day(s) or more -
Joint- NC Starting Drills for Chamfering 90°, Coated_JO-NCSD-V
YAMAWA MFG
[Specifications]
· Shape: Centering
· Countersink
· Coating: TiN
· Tool material: HSS
[Applications] Centering (positioning) / hole chamfering- Volume Discount
Standard Price: MYR 165.88- Days to Ship: 11 Day(s) -
Long Shank High Helix Center Drills-Type A 90°, Coated_CE-QL-V
YAMAWA MFG
[Features]
·Coating with excellent abrasion resistance and chip-adhesion-resistance
[Applications]
·Center Hole Drilling
・ Chamfering- Volume Discount
Standard Price: MYR 302.20- Days to Ship: 6 Day(s) or more -
Joint- High Helix Center Drills-Type A 60°, Coated_JO-CES-V
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: TiN
· Tool material: HSS
[Applications] Centering (positioning) / hole chamfering- Volume Discount
Standard Price: MYR 208.92- Days to Ship: 11 Day(s) or more -
High Helix Center Drills-Type A 60°, Coated_CE-S-V
YAMAWA MFG
Centering hole drill with a coating suitable for soft materials and relatively viscous materials thanks to its groove with high torsion.
[Features]
· Since it has a coating, stable processing is possible even if the cutting speed is increased, and the tool life is improved.
[Applications]
· Used for A-type 60° center drilling.
· Guidelines for machining requirements are, carbon steel 15-30, steel alloy 10-25, stainless steel 5-12, and cast iron: 8-15 m/min.- Volume Discount
Standard Price: MYR 100.97- Days to Ship: 5 Day(s) or more -
High Helix Center Drills-Type A 60°, Coated, (Old JIS Type 1 )_CE-S-V(I)
YAMAWA MFG
Former JIS 1-type center hole drill with a strong helical groove coated with excellent wear resistance and adhesion resistance.
- Volume Discount
Standard Price: MYR 191.17- Days to Ship: 7 Day(s) or more -
Joint- Low Helix Center Drills-Type A 60°, Coated_JO-CDS-V
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: TiN
· Tool material: HSS
[Applications] Centering (positioning) / hole chamfering- Volume Discount
Standard Price: MYR 208.92- Days to Ship: 11 Day(s) -
Low Helix Center Drills-Type A 90°, Coated_CD-Q-V
YAMAWA MFG
For drilling 90° center holes, it is a weak helix groove A-type center hole drill that can process positioning and chamfering at the same time, and has a coating with excellent wear and adhesion resistance.
- Volume Discount
Standard Price: MYR 158.18- Days to Ship: 7 Day(s) or more -
Long Shank High Helix Center Drills-Type A 60°, Coated_CE-SL-V
YAMAWA MFG
Suitable for center hole machining of viscous and soft work materials.
- Volume Discount
Standard Price: MYR 259.58- Days to Ship: 6 Day(s) or more -
Long Shank Low Helix Center Drills-Type A 60°, Coated_CD-SL-V
YAMAWA MFG
A long shank weak helix groove A-type center hole drill suitable for positioning and chamfering in deep hole drilling, and has a coating with excellent wear and adhesion resistance.
- Volume Discount
Standard Price: MYR 354.74- Days to Ship: 6 Day(s) or more -
Carbide Point Drills 60°, Coated_C-PE-S-V
YAMAWA MFG
The 2 angles, 125° tip angle and 60° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
- Volume Discount
Standard Price: MYR 604.41- Days to Ship: 7 Day(s) or more -
Carbide Point Drills 90°, Coated_C-PE-Q-V
YAMAWA MFG
The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
- Volume Discount
Standard Price: MYR 402.53- Days to Ship: 5 Day(s) or more -
Joint- Carbide Point Drills 90°, Coated_JO-C-PEQ-V
YAMAWA MFG
[Specifications]
· Shape: Centering/countersink
· Coating: TiAlN
· Tool material: Carbide
[Applications] Centering (positioning) / hole chamferingStandard Price: MYR 1,037.47- Days to Ship: 9 Day(s) -
Titanium Coated Countersink 3 Flute Blade 90° CBN Polish
NOGA_JAPAN
[Features]
· Noga Titanium Coated Countersinks are made of heat-treated HSS with a CBN ground blade and titanium nitride coating.
· The deep sharp blade and accurate cutting ensure high precision and excellent cutting performance.
· Recommended for steel, cast items, non-ferrous metals, and light metals.
· More effective at relatively slow cutting speeds (10 to 20 m/min).- Volume Discount
Standard Price: MYR 156.11- Days to Ship: 6 Day(s) or more -
Titanium Coated Countersink Set 【5-6 Pieces Per Package】
NOGA_JAPAN
[Features]
· Noga Titanium Coated Countersinks are made of heat-treated HSS with a CBN ground blade and titanium nitride coating.
· The deep sharp blade and accurate cutting ensure high precision and excellent cutting performance.
· Recommended for steel, cast items, non-ferrous metals, and light metals.
· More effective at relatively slow cutting speeds (10 to 20 m/min).Standard Price: MYR 2,433.28- Days to Ship: 9 Day(s) -
Carbide Center Drill TiAℓ N KCDA-60
KYOWA SEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.
- Volume Discount
Standard Price: MYR 350.55- Days to Ship: 5 Day(s) or more -
Carbide Center Drill TiAℓ N KCDA-90
KYOWA SEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.
- Volume Discount
Standard Price: MYR 350.55- Days to Ship: 6 Day(s) or more -
Electrodeposition Diamond Router ED-EM
OSG
Standard in-stock item, sold by designated agencies
[Features]
· Suitable for machining with lower cutting depth and brittle composites.
· Supports machinable ceramics processing as well.- Volume Discount
Standard Price: MYR 199.16- Days to Ship: 11 Day(s) or more -
TIN Coating, 3 Flute Chamfer Cutter, TIN-3MC (SKH51)
TAIYO-TOOL
[Applications]
· Hole chamfer
[Single Blade / Double Blade]
· Single blade
[Tool Grade]
· High-speed steel
[Coating Y/N] Y
[Coating Type] TiNStandard Price: MYR 325.80- Days to Ship: 4 Day(s) or more -
CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank
SANDVIK
High performance end mill with high versatility
[Features]
·One end mill for all work materials
·Improved machine operating rate
·Minimize tool inventory
·Safe and predictable tool life
·High flexibility and optimized tooling- Volume Discount
Standard Price: MYR 605.36- Days to Ship: 10 Day(s) -
Hexagonal Shank Countersink (90° Tip Angle, Titanium Coated)
RUKO
[Features]
· Hexagonal shaft (6.35 mm) shank allows easy setting for work.
· Minimizes chattering and burrs.
[Applications]
· Work materials: Iron, cast iron, non-ferrous metals, light metals.Standard Price: MYR 209.08- Days to Ship: 8 Day(s) -
SPEED TIGER
[Features]
· Blade diameters φ10 or less are high rigidity types with thick shank diameter.
· A high-lubricity AlTiN coated tool that is ideal for soft materials with a hardness of HRC 45 or less, such as raw materials or stainless steel. Handy to have one in a magazine rack.Standard Price: MYR 186.88- Days to Ship: 6 Day(s) or more -
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
[Features]
· 90° Carbide 2-Flute Chamfering V-Grooving End Mill
· Use for V-grooving, horizontal chamfering, centering, hole chamfering.
· Nanoparticle Multilayer Coating
· Excellent lubricity and abrasion resistance.
· Suitable for a wide range of work materials from general steel to aluminum.- Volume Discount
Standard Price: MYR 190.09- Days to Ship: 5 Day(s) or more -
Center Drills for Carbon Steels of Medium Hardness forRunning at High Speed_MHCDS
YAMAWA MFG
[Features]
· In order to improve the precision of the protrusion position and shank, it has a single-edge shape.
· In order to improve centripetal force, the tapered tip is made into "Three Rake" + "Thinning" shape, enabling high speed and high feed machining.
· The tapered tip uses "three rake" + "X thinning", enabling high-speed and high-feed machining.
[Applications]
· Work materials: Carbon steel, alloy steel, tool steel, cast iron, copper alloy, aluminum alloy.- Volume Discount
Standard Price: MYR 103.61- Days to Ship: 7 Day(s) or more -
OptiMill® Chamfering Mill (4 Flutes)
MAPAL
[Features]
· Dedicated for chamfering.
· The 4-flute specification emphasizes efficiency.
· No flat part at the tip.
[Applications]
· Work materials: Carbon steel, alloy steel, stainless steel, cast iron, light alloy.Standard Price: MYR 258.28- Days to Ship: 8 Day(s) -
Chamfering Cutter NC Spot Drill (Chip)
Nine9
[Features]
·Insert for NC spot drill holder.
·Momitsuke and chamfering are integrated into one process.
·The tip angle of 145° prevents drill shoulder chipping.
[Applications]
·For CNC lathes, CNC compound lathes, and machining centers for drilling pilot holes for tapping
·Applying kneading only at 145°
·Chamfering, V-grooving.Standard Price: MYR 309.70 Days to Ship: 9 Day(s) -
Standard Price: MYR 779.25- Days to Ship: 9 Day(s) or more -
MAPAL
[Features]
· A new connection method "CFS" is adopted.
· Guaranteed high runout accuracy of 5 μm or less.
· Features simple operability and excellent stability.
· 90° chamfer shape.
[Applications]
· Work materials: Carbon steel, alloy steel, cast iron, stainless steel, light alloy.Standard Price: MYR 599.05- Days to Ship: 8 Day(s) or more -
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
OSG
High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.
Standard Price: MYR 999.31- Days to Ship: 7 Day(s) or more -
Standard Price: MYR 559.73 Days to Ship: 5 Day(s) or more -
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.- Volume Discount
Standard Price: MYR 470.86- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | NOGA_JAPAN | NOGA_JAPAN | KYOWA SEIKO | KYOWA SEIKO | OSG | TAIYO-TOOL | SANDVIK | RUKO | SPEED TIGER | 7 LEADERS | YAMAWA MFG | MAPAL | Nine9 | ALPEN | MAPAL | OSG | OSG | OSG |
| Product Series | Joint- NC Starting Drills for Chamfering 90°, Coated_JO-NCSD-V | Long Shank High Helix Center Drills-Type A 90°, Coated_CE-QL-V | High Helix Center Drills-Type A 60°, Coated, (Old JIS Type 1 )_CE-S-V(I) | Long Shank High Helix Center Drills-Type A 60°, Coated_CE-SL-V | Long Shank Low Helix Center Drills-Type A 60°, Coated_CD-SL-V | CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank | Hexagonal Shank Countersink (90° Tip Angle, Titanium Coated) | Center Drills for Carbon Steels of Medium Hardness forRunning at High Speed_MHCDS | FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series | ||||||||||||||||||||||||||||||||||||
| CAD |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 11 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 11 Day(s) | 6 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 11 Day(s) | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 10 Day(s) | 8 Day(s) | 6 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 8 Day(s) | 9 Day(s) | 9 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Tool Material Type | Carbide | Carbide | High-speed steel | Carbide | High-speed steel | Carbide | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | High-speed steel | Carbide | High-speed steel | - | Carbide | Cobalt HSS | - | - | - | - | Carbide | High-speed steel | Carbide |
| Tool Diameter (D)(mm) | 4 ～ 12 | 4 ～ 12 | 3 ～ 25 | 5 ～ 20 | 5 ～ 12.7 | 5 ～ 20 | 4.3 ～ 31 | 5 ～ 31 | 6.30/8.30/10.40/12.40/16.50/20.50 | 3 ～ 25 | 4 ～ 16 | 3 ～ 20 | 3 ～ 20 | 10 ～ 16 | 4 ～ 20 | 10 ～ 16 | 4 ～ 12 | 10 ～ 16 | 4 ～ 18 | 8 ～ 14 | 10 ～ 16 | 4 ～ 18 | 4 ～ 12 | 4 ～ 12 | 6 ～ 10 | 3 ～ 16 | 10 ～ 16 | 6.3 ～ 31 | - | 0.3 ～ 3 | 0.3 ～ 3 | 6 ～ 10 | 16 ～ 46 | 6 ～ 12 | 1.5 ～ 3.5 | 3 ～ 20 | 0.5 ～ 20 | 1 ～ 6 | - | - | 5.3 ～ 31 | - | 1 ～ 3.8 | 12 | - |
| Tip angle (θ) | 60 | 90 | 120 | 120 | 90 | 90 | 90 | 90 | 90 | 90° | 125° | 125° | 125° | 90 | 125° | 90 | 90° | 60° | 60° | 60° | 60° | 90° | 60° | 60° | 125° | 125° | 90 | 90 | - | 120° | 120° | - | 60 ～ 120 | 90° | 90 | 90 | 90 | 60° | Center Hole Angle: 90° | 145+90 | 90° | - | 90 | 90 | 90° |
| Application | - | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Hole Chamfer | Hole Chamfer | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | - | - | Centering (Positioning) | Centering (Positioning) | - | Hole Chamfer | Chamfering/Horizontal | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | - | - | - | - | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | - | Chamfering/Horizontal |
| work material | - | - | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | - | - | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | - | - | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | - | - | - | - | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | - | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] |
| Single blade, two blades | - | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Double-edged | Double-edged | Double-edged | Single blade | - | Single blade | Double-edged | Single blade | Double-edged | Double-edged | Single blade | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Single blade | Single blade | Single blade | Double-edged | Double-edged | - | Single blade | Single blade | Single blade | Double-edged | - | Single blade | Single blade | - | - | - | Single blade | Single blade | Single blade |
| Peripheral Blade Y/N | - | - | - | - | - | - | - | - | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | - | - | - | - | NA | Available | Available | - | NA | - | - | - | - | NA | Available | NA |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | TiAlN | TiAlN | Other | Other | Other | Other | TiAlN | TiN | TiN | TiN | TiCN | TiCN | TiCN | TiCN | TiCN | TiN | TiN | TiN | TiN | TiN | TiN | TiN | TiN | TiN | TiAlN | TiAlN | TiAlN | TiN | TiN | TiAlN | TiAlN | - | TiN | Other | TiN | Other | Other | TiCN | Other | TiAlN | Other | Other | TiAlN | TiN | - |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1～6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2~5
- 2～10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3～14
- 3～15
- 3.1
- 3.15
- 3.2
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10.1
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 16.5,20.5,25.0,37.0
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.4
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.5
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Narrow search by specifying Manufacturer
-
- FUJIGEN (31)
- YAMAWA MFG (26)
- IWATA TOOL (25)
- OSG (17)
- MAKOTOLOY (13)
- GUHRING (10)
- ILIX (7)
- DAISHOWASEIKI (5)
- THE_CUT (5)
- SANKO MFG (4)
- ATOM (3)
- Nine9 (3)
- OKAZAKI SEIKO (3)
- TRUSCO NAKAYAMA (3)
- KYOWA SEIKO (2)
- MAPAL (2)
- NOGA_JAPAN (2)
- NS TOOL (2)
- 7 LEADERS (1)
- ALPEN (1)
- DIXI (1)
- EIKOSHA (1)
- OKABE (1)
- SPEED TIGER (1)
- RUKO (1)
- RYOCO SEIKI (1)
- SANDVIK (1)
- TAIYO-TOOL (1)
- SKC (0)
- ESCO (0)
- NIKKENKOSAKU (0)
- UNION TOOL (0)
- STAR-M (0)
- FUKUDA (0)
- ATI (0)
- ASAHI TOOLS (0)
- DIJET (0)
- DAIICHITOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Chamfering / Centering Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy