(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Chamfering / Centering Tools（work material：Aluminum Page6）
Search by specifying the lower class category
Centering/Countersink
Chamfer, V-Grooves
Inner R
Replaceable Blade Type Chamfering Tools/Tips/Blades
| Days to Ship |
|
|---|
-
EIKOSHA
[Features]
· It is for center hole finish and chamfer finish.- Volume Discount
Standard Price: MYR 105.83- Days to Ship: 6 Day(s) or more -
Center Milling (Tapered Shank) CFT
EIKOSHA
[Features]
· It is for center hole finish and chamfer finish.Standard Price: MYR 1,189.23- Days to Ship: 6 Day(s) or more -
EIKOSHA
[Features]
· Capable of centering, chamfering and side machining, as well as drilling and V grooving depending on the tip angle.- Volume Discount
Standard Price: MYR 291.58- Days to Ship: 6 Day(s) or more -
Mini Corner R Cutter (Half) MCRC
EIKOSHA
[Features]
· It is a round chamfering cutter whose tip diameter is unified at φ2.Standard Price: MYR 436.26- Days to Ship: 10 Day(s) or more -
Carbide Corner Radius Cutter CCRC
EIKOSHA
[Features]
· A round chamfering cutter for corners.
· Solid up to R2.5, attached blade from R3.Standard Price: MYR 651.35- Days to Ship: 10 Day(s) or more -
Carbide Mini Corner R Cutter CMCRC
EIKOSHA
[Features]
· It is a round chamfering cutter with a small tip diameter.
· A solid type.Standard Price: MYR 359.89- Days to Ship: 10 Day(s) or more -
Umbrella-type cutter with handle PCS
EIKOSHA
[Features]
· Front (with end blade) cutting and chamfering are possible.- Volume Discount
Standard Price: MYR 3,448.08- Days to Ship: 6 Day(s) or more -
Carbide Center Drill TiAℓ N KCDA-60
KYOWA SEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.
- Volume Discount
Standard Price: MYR 350.55- Days to Ship: 5 Day(s) or more -
Carbide Center Drill TiAℓ N KCDA-90
KYOWA SEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.
- Volume Discount
Standard Price: MYR 350.55- Days to Ship: 6 Day(s) or more -
Carbide Center Drill Noncoat KCD-60
KYOWA SEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.
- Volume Discount
Standard Price: MYR 285.98- Days to Ship: 10 Day(s) or more -
Carbide Center Drill Noncoat KCD-90
KYOWA SEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.
- Volume Discount
Standard Price: MYR 285.98- Days to Ship: 6 Day(s) or more -
Carbide Chamfering Cutter KMC-2
KYOWA SEIKO
[Applications]It can be used for chamfering and horizontal machining. [Features]By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, and aluminum.
- Volume Discount
Standard Price: MYR 195.59- Days to Ship: 5 Day(s) or more -
Carbide Inversed Chamfering Cutter KUMC-4
KYOWA SEIKO
4 straight flutes.
45° (single angle type)
Work Material, General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/Aluminum
Single-edge blade
Tool grade, CarbideStandard Price: MYR 501.21- Days to Ship: 5 Day(s) or more -
Carbide Inversed Chamfering Cutter KUMW-4
KYOWA SEIKO
4 straight flutes.
90° (included angle type)
Work Material, General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/Aluminum/Copper/Resin
Single-edge blade
Tool grade, CarbideStandard Price: MYR 501.21- Days to Ship: 5 Day(s) or more -
CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank
SANDVIK
High performance end mill with high versatility
[Features]
·One end mill for all work materials
·Improved machine operating rate
·Minimize tool inventory
·Safe and predictable tool life
·High flexibility and optimized tooling- Volume Discount
Standard Price: MYR 605.36- Days to Ship: 10 Day(s) -
CoroMill Plura General-Purpose End Mill For Round Chamfering, 1U000
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
- Volume Discount
Standard Price: MYR 620.60- Days to Ship: 10 Day(s) -
Hexagonal Shank Countersink (90° Tip Angle)
RUKO
[Features]
· Hexagonal shaft (6.35 mm) shank allows easy setting for work.
· Minimizes chattering and burrs.
[Applications]
· Work materials: Iron, cast iron, non-ferrous metals, light metals.Standard Price: MYR 194.57- Days to Ship: 8 Day(s) -
Hexagonal Shank Countersink (90° Tip Angle, Titanium Coated)
RUKO
[Features]
· Hexagonal shaft (6.35 mm) shank allows easy setting for work.
· Minimizes chattering and burrs.
[Applications]
· Work materials: Iron, cast iron, non-ferrous metals, light metals.Standard Price: MYR 209.08- Days to Ship: 8 Day(s) -
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
[Features]
· 90° Carbide 2-Flute Chamfering V-Grooving End Mill
· Use for V-grooving, horizontal chamfering, centering, hole chamfering.
· Nanoparticle Multilayer Coating
· Excellent lubricity and abrasion resistance.
· Suitable for a wide range of work materials from general steel to aluminum.- Volume Discount
Standard Price: MYR 190.09- Days to Ship: 5 Day(s) or more -
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
OSG
High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.
Standard Price: MYR 999.31- Days to Ship: 7 Day(s) or more -
Chamfering Reamer (3-Flute) MC
DAIICHITOOL
[Features]
Chamfering reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.Standard Price: MYR 188.27- Days to Ship: 7 Day(s) or more -
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.- Volume Discount
Standard Price: MYR 470.86- Days to Ship: 5 Day(s) or more -
WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.- Volume Discount
Standard Price: MYR 470.86- Days to Ship: 5 Day(s) or more -
WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.- Volume Discount
Standard Price: MYR 498.20- Days to Ship: 7 Day(s) or more -
WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.- Volume Discount
Standard Price: MYR 498.20- Days to Ship: 5 Day(s) or more -
MUGEN Coating C Chamfer Cutter NSCV-M
NS TOOL
[Features]
· Enables easy C chamfering.
· Uses MUGEN coating that dramatically improves the durability.Standard Price: MYR 423.06- Days to Ship: 11 Day(s) -
NS TOOL
[Features]
· It allows easy chamfer edge machining.
[Part Number: NSCV-4]
cutting diameter (D) (mm): 4
Blade length (mm): 2
Shank diameter (d) (mm): 4
Overall length (mm): 60
Minimum order quantity: 1 pc.
[Part Number: NSCV-6]
cutting diameter (D) (mm): 6
Blade length (mm): 3
Shank diameter (d) (mm): 6
Overall length (mm): 70
Minimum order quantity: 1 pc.Standard Price: MYR 412.66- Days to Ship: 11 Day(s) -
EIKOSHA
Flute shape: Right-hand straight flute
Work material: General steel / heat-treated steel / aluminum / copper
[Applications]Used for round chamfering.Standard Price: MYR 371.56- Days to Ship: 8 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°
MAKOTOLOY
[Features]
·1 pc. of V-cut end mill can be used for various purposes such as centering countersinking, inner chamfering, outer peripheral chamfering, side machining, V-groove, drilling, and is ideal for MC and NC machining
·Since the cutting tip is close to the V edge, the residue on the bottom during V-groove machining is very few
·Since it is based on a carbide end mill with a right blade and a right twist of 30°, the sharpness is one of the best and the discharge of cutting chips is also good
·Since the ultra-fine carbide alloy is used as the carbide material, it has a lifespan approx. 10 times longer than that of HSS end mill. Furthermore, the V-cut end mill coating series has a long lifespan and increases cutting speed to shorten machining time
・ Standard typeStandard Price: MYR 456.66- Days to Ship: 9 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Standard Price: MYR 456.66- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Standard Price: MYR 456.66- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Standard Price: MYR 613.06- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Standard Price: MYR 613.06- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Standard Price: MYR 613.06- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Standard Price: MYR 548.20- Days to Ship: 11 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Standard Price: MYR 548.20- Days to Ship: 11 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Standard Price: MYR 548.20- Days to Ship: 11 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Standard Price: MYR 655.81- Days to Ship: 5 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Standard Price: MYR 655.81- Days to Ship: 7 Day(s) or more -
Carbide V Cut End Mill Long Type Coated Series AMVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Standard Price: MYR 655.81- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 499.25- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 499.25- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 499.25- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 580.27- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 580.27- Days to Ship: 11 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | SANDVIK | SANDVIK | RUKO | RUKO | 7 LEADERS | OSG | DAIICHITOOL | OSG | OSG | OSG | OSG | NS TOOL | NS TOOL | EIKOSHA | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY |
| Product Series | CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank | CoroMill Plura General-Purpose End Mill For Round Chamfering, 1U000 | Hexagonal Shank Countersink (90° Tip Angle, Titanium Coated) | FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series | WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P | WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60° | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90° | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90° | |||||||||||||||||||||||||
| CAD |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 10 Day(s) | 8 Day(s) | 8 Day(s) | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 11 Day(s) | 11 Day(s) | 8 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more |
| Tool Material Type | High-speed steel | High-speed steel | Cobalt HSS | Cobalt HSS | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Tool Diameter (D)(mm) | 6 ～ 100 | 40 ～ 100 | 4 ～ 35 | 3 ～ 19 | - | - | 65 ～ 100 | 0.3 ～ 3 | 0.3 ～ 3 | 0.3 ～ 3 | 0.3 ～ 3 | 0.3 ～ 4 | - | - | 6 ～ 12 | 6 ～ 20 | 1.5 ～ 3.5 | 1.5 ～ 3.5 | 0.5 ～ 20 | 1 ～ 3.8 | 8 ～ 46 | - | - | - | - | 4 ～ 6 | 4 ～ 6 | 9 ～ 48 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 |
| Tip angle (θ) | 60 ～ 120 | 60 ～ 90 | 30 ～ 120 | - | - | - | 60 ～ 90 | 120° | 120° | 120° | 120° | 90° | - | - | 90° | - | 90 | 90 | 90 | 90 | 60° ～ 90° | 90° | - | - | - | 45° | 45° | - | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 |
| Application | Hole Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer / Chamfering/Horizontal / Round Chamfer | Hole Chamfer / Chamfering/Horizontal / Round Chamfer | Hole Chamfer / Chamfering/Horizontal / Round Chamfer | Hole Chamfer | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Hole Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Chamfering/Horizontal | - | - | - | Chamfering/Horizontal | Chamfering/Horizontal | Round Chamfer | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling |
| work material | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] |
| Single blade, two blades | - | - | - | - | - | - | - | Double-edged | Double-edged | Double-edged | Double-edged | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | Single blade | Single blade | Single blade | - | - | - | Single blade | Single blade | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade |
| Peripheral Blade Y/N | - | - | - | - | - | - | - | - | - | - | - | - | - | - | NA | NA | Available | Available | - | NA | Available | NA | - | - | - | Available | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | Available | Available | NA | NA | NA | NA | NA | Available | NA | NA | Available | Available | Available | - | Available | Available | Available | Available | Available | NA | - | NA | NA | NA | Available | Available | Available | NA | NA | NA | Available | Available | Available | NA | NA | NA | Available | Available |
| Coating Type | - | - | - | - | - | - | - | TiAlN | TiAlN | - | - | - | - | - | Other | - | Non-Coated | TiN | Other | TiAlN | - | - | Other | Other | Other | TiAlN | - | - | - | - | - | TiAlN | TiAlN | TiAlN | - | - | - | TiAlN | TiAlN | TiAlN | - | - | - | TiAlN | TiAlN |
| R Size (R)(mm) | - | - | - | 0.5 ～ 8 | 0.5 ～ 20 | 1 ～ 8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | R0.5 ～ R16 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1～6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2~5
- 2～10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3～14
- 3～15
- 3.1
- 3.15
- 3.2
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10.1
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 16.5,20.5,25.0,37.0
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.4
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.5
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Narrow search by specifying Manufacturer
-
- FUJIGEN (47)
- IWATA TOOL (42)
- MAKOTOLOY (22)
- OSG (21)
- EIKOSHA (19)
- GUHRING (17)
- THE_CUT (12)
- ILIX (10)
- DAISHOWASEIKI (7)
- KYOWA SEIKO (7)
- SANKO MFG (6)
- YAMAWA MFG (5)
- NS TOOL (4)
- OKAZAKI SEIKO (4)
- ASAHI TOOLS (3)
- DIJET (3)
- DIXI (3)
- FUKUDA (3)
- OKABE (3)
- ATOM (2)
- DAIICHITOOL (2)
- Nine9 (2)
- RUKO (2)
- SANDVIK (2)
- TRUSCO NAKAYAMA (2)
- 7 LEADERS (1)
- UNION TOOL (1)
- RYOCO SEIKI (0)
- SKC (0)
- ESCO (0)
- NIKKENKOSAKU (0)
- SPEED TIGER (0)
- STAR-M (0)
- ATI (0)
- MAPAL (0)
- NOGA_JAPAN (0)
- ALPEN (0)
- TAIYO-TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Chamfering / Centering Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy