(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Chamfering / Centering Tools（work material：general steel Page7）
Search by specifying the lower class category
Centering/Countersink
Chamfer, V-Grooves
Inner R
Replaceable Blade Type Chamfering Tools/Tips/Blades
| Days to Ship |
|
|---|
-
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
OSG
High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.
Standard Price: MYR 999.31- Days to Ship: 7 Day(s) or more -
Chamfering Reamer (3-Flute) MC
DAIICHITOOL
[Features]
Chamfering reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.Standard Price: MYR 188.27- Days to Ship: 7 Day(s) or more -
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.- Volume Discount
Standard Price: MYR 470.86- Days to Ship: 5 Day(s) or more -
WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.- Volume Discount
Standard Price: MYR 470.86- Days to Ship: 5 Day(s) or more -
WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.- Volume Discount
Standard Price: MYR 498.20- Days to Ship: 7 Day(s) or more -
WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.- Volume Discount
Standard Price: MYR 498.20- Days to Ship: 5 Day(s) or more -
MUGEN Coating C Chamfer Cutter NSCV-M
NS TOOL
[Features]
· Enables easy C chamfering.
· Uses MUGEN coating that dramatically improves the durability.Standard Price: MYR 423.06- Days to Ship: 11 Day(s) -
EIKOSHA
Flute shape: Right-hand straight flute
Work material: General steel / heat-treated steel / aluminum / copper
[Applications]Used for round chamfering.Standard Price: MYR 371.56- Days to Ship: 8 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°
MAKOTOLOY
[Features]
·1 pc. of V-cut end mill can be used for various purposes such as centering countersinking, inner chamfering, outer peripheral chamfering, side machining, V-groove, drilling, and is ideal for MC and NC machining
·Since the cutting tip is close to the V edge, the residue on the bottom during V-groove machining is very few
·Since it is based on a carbide end mill with a right blade and a right twist of 30°, the sharpness is one of the best and the discharge of cutting chips is also good
·Since the ultra-fine carbide alloy is used as the carbide material, it has a lifespan approx. 10 times longer than that of HSS end mill. Furthermore, the V-cut end mill coating series has a long lifespan and increases cutting speed to shorten machining time
・ Standard typeStandard Price: MYR 456.66- Days to Ship: 9 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Standard Price: MYR 456.66- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Standard Price: MYR 456.66- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Standard Price: MYR 613.06- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Standard Price: MYR 613.06- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Standard Price: MYR 613.06- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Standard Price: MYR 548.20- Days to Ship: 11 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Standard Price: MYR 548.20- Days to Ship: 11 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Standard Price: MYR 548.20- Days to Ship: 11 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Standard Price: MYR 655.81- Days to Ship: 5 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Standard Price: MYR 655.81- Days to Ship: 7 Day(s) or more -
Carbide V Cut End Mill Long Type Coated Series AMVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Standard Price: MYR 655.81- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 499.25- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 499.25- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 499.25- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 580.27- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 580.27- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 580.27- Days to Ship: 11 Day(s) or more -
V Spot Carbide Drill, Standard Type, TiN Coat, 90°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.Standard Price: MYR 549.49- Days to Ship: 7 Day(s) or more -
V Spot Carbide Drill, Standard Type, TiN Coat, 120°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.Standard Price: MYR 549.49- Days to Ship: 11 Day(s) or more -
V Spot Carbide Drill, Long Type, TiN Coat, 90°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.Standard Price: MYR 709.58- Days to Ship: 11 Day(s) or more -
Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V
THE_CUT
[Features]
· No need to turn over the work material. (Also removes through-hole burrs)
· Both sides can be chamfered with the one cutter tool.
· Ultra-fine particle carbide with TiAlN coating for a longer tool life.Standard Price: MYR 984.89- Days to Ship: 11 Day(s) or more -
Mini Corner Rounding Cutter, Carbide C-CRC-V
THE_CUT
[Features]
· Ideal for CNC machining.
· Capable of machining extremely thin workpieces.
· Simple regrinding/repolishing.Standard Price: MYR 478.64- Days to Ship: 18 Day(s) -
THE_CUT
[Features]
· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.
· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.
· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.Standard Price: MYR 531.31- Days to Ship: 5 Day(s) or more -
Point Set Drill, Carbide C-NC-PSD
THE_CUT
[Features]
· Allows for machining at higher speeds and a significantly longer tool life than with a high speed steel (TiAlN) point set drill.Standard Price: MYR 219.98- Days to Ship: 11 Day(s) or more -
Chamfering Cutter 90°, 3 Flutes, TiN Coat, CSQ-G
THE_CUT
[Features]
· The tool life is drastically improved through the use of 3 flutes and a TiN coating.
· No chatter.
· Capable of true circular machining.Standard Price: MYR 205.26- Days to Ship: 5 Day(s) or more -
Double Sided Chamfering Cutter 45° DFC
THE_CUT
[Features]
· Capable of V-grooving both front and back surfaces as well as the side surfaces.
· Capable of chamfering up to C2.8 for front chamfering.
· The use of a dedicated insert (4 cutting edges) delivers high precision machining.Standard Price: MYR 1,200.20- Days to Ship: 11 Day(s) or more -
Insert For New Tornado MT-CP/CC
THE_CUT
[Features]
Cutting speed (m/min): 60 to 150
Feed speed (mm/t): 0.02 to 0.08
Set screw: MST-4S, MST-2.5S, MST-3S, MST-2 (M5), MST-2L040 (M6)Standard Price: MYR 76.40- Days to Ship: 11 Day(s) or more -
Dedicated Insert For Double Face Cutter, MT-SDM/H
THE_CUT
Dedicated insert MT-SDM/H for THE CUT replaceable insert double-face chamfer tool.
Standard Price: MYR 80.05 Days to Ship: 11 Day(s) -
Insert For General Purpose Chamfering Cutter, MD-TD
THE_CUT
[Features]
· Carbide base material for a longer tool life. As 3 cutting edges can be used, it is also economical.Standard Price: MYR 115.80 Days to Ship: 18 Day(s) -
Insert For Seat Surface Cutter, MT-DC
THE_CUT
[Features]
Cutting speed (m/min): 40 to 100
Feed speed (mm/t): 0.04 to 0.1
Wrench: MFT-8/MFT-15Standard Price: MYR 245.46- Days to Ship: 10 Day(s) or more -
Chamfering Cutter Super Mentori-Maru MTMS 6.5/9
THE_CUT
[Features]
· Uses a positive lathe insert for a light cutting sharpness.
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used (however, the screws need to be changed).
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· With the insert, the MTMS9 is capable of machining up to C7 and the MTMS6.5 up to C4.5. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.
· Can be used like an end mill for machining materials from an un-machined state.·Standard Price: MYR 1,279.96 Days to Ship: 10 Day(s) or more -
Insert For Super Mentori-Maru ZERO
THE_CUT
[Features]
·The unique shape allows high-precision machining.
Set screw: MST-3S
Wrench: MFT-9Standard Price: MYR 174.88- Days to Ship: 7 Day(s) or more -
Coated Type A 60° High Helix Single End Center Hole Drill_AUCES
YAMAWA MFG
The single-edged shape makes it possible to achieve high-quality center holes, and the constant tool setting in the holder stabilizes the protrusion length.
- Volume Discount
Standard Price: MYR 51.03- Days to Ship: 10 Day(s) or more -
Coated Type A 60° High Helix Single End Center Hole Drill_AUCDS
YAMAWA MFG
The single-edged shape makes it possible to achieve high-quality center holes, and the constant tool setting in the holder stabilizes the protrusion length.
- Volume Discount
Standard Price: MYR 59.88- Days to Ship: 9 Day(s) or more -
Coated Single End Point Drill PE-90°_AUPEQ
YAMAWA MFG
[Features]
·Good sharpness due to the strong helix design and good surface roughness due to improved accuracy due to the single edge shape.
·High-rigidity design enables high-speed cutting.
·Eliminates the problem of center hole drill breakage.
·Simultaneous combined processing of positioning and chamfering is possible, and it can also be used for multiple functions such as grooving.
·Good biting due to the two-step flat shape provides high machining accuracy.
·Single-edged point drills have a greater degree of freedom in projecting, so chips are discharged smoothly.- Volume Discount
Standard Price: MYR 93.88- Days to Ship: 8 Day(s) or more -
Coated Single End Point Drill PE-90°_AUPES
YAMAWA MFG
Single-edged coating point drill capable of simultaneous centering and chamfering. [Features]·Good surface roughness can be obtained by improving accuracy with a single-edged shape. ·High-rigidity design enables high-speed cutting and grooving, etc.
- Volume Discount
Standard Price: MYR 109.76- Days to Ship: 11 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | DAIICHITOOL | OSG | OSG | OSG | OSG | NS TOOL | EIKOSHA | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product Series | FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series | WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P | WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60° | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90° | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120° | Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V | Coated Type A 60° High Helix Single End Center Hole Drill_AUCES | Coated Type A 60° High Helix Single End Center Hole Drill_AUCDS | ||||||||||||||||||||||||
| CAD |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 11 Day(s) | 8 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 18 Day(s) | 5 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) | 18 Day(s) | 10 Day(s) or more | 10 Day(s) or more | 7 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 11 Day(s) or more |
| Tool Material Type | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | - | - | Carbide | - | - | - | - | High-speed steel | High-speed steel | High-speed steel | High-speed steel |
| Tool Diameter (D)(mm) | 1 ～ 3.8 | 8 ～ 46 | - | - | - | - | 4 ～ 6 | 9 ～ 48 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 5 ～ 8.5 | 1 ～ 2.5 | 3 ～ 16 | 3 ～ 10 | 6.3 ～ 31 | 11 ～ 20 | - | - | - | - | - | - | 1 ～ 6 | 1 ～ 6 | 0.5 ～ 5 | 0.5 ～ 5 |
| Tip angle (θ) | 90 | 60° ～ 90° | 90° | - | - | - | 45° | - | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 90 | 120 | 90 | 90° | - | 60 ～ 120 | 90 | 90 | - | - | - | - | - | - | - | 60 | 60 | 90 | 60 |
| Application | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Chamfering/Horizontal | - | - | - | Chamfering/Horizontal | Round Chamfer | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Hole Chamfer / Drilling / Other | Round Chamfer | Centering (Positioning) / Chamfering/Horizontal / V Groove / Drilling / Other | Hole Chamfer | Hole Chamfer | Hole Chamfer / V Groove | - | Hole Chamfer | - | - | Hole Chamfer / Chamfering/Horizontal / V Groove / Other | - | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove |
| work material | general steel[◎] | general steel[○] | general steel[◎] | general steel[○] | general steel[○] | general steel[◎] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] |
| Single blade, two blades | Single blade | Single blade | Single blade | - | - | - | Single blade | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | - | - | - | - | - | - | Single blade | Single blade | Single blade | Single blade |
| Peripheral Blade Y/N | NA | Available | NA | - | - | - | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Available | Available | Available | Available |
| Coating Y/N | Available | - | Available | Available | Available | Available | Available | - | NA | NA | NA | Available | Available | Available | NA | NA | NA | Available | Available | Available | NA | NA | NA | Available | Available | Available | Available | Available | Available | Available | Available | Available | NA | Available | - | - | Available | - | - | - | - | Available | Available | Available | Available |
| Coating Type | TiAlN | - | - | Other | Other | Other | TiAlN | - | - | - | - | TiAlN | TiAlN | TiAlN | - | - | - | TiAlN | TiAlN | TiAlN | - | - | - | TiAlN | TiAlN | TiAlN | TiN | TiN | TiN | TiAlN | TiAlN | TiAlN | - | TiN | - | - | TiAlN | - | - | - | - | - | - | - | - |
| R Size (R)(mm) | - | - | - | - | - | - | - | R0.5 ～ R16 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.25 ～ 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1～6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2~5
- 2～10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3～14
- 3～15
- 3.1
- 3.15
- 3.2
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10.1
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 16.5,20.5,25.0,37.0
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.4
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.5
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Narrow search by specifying Manufacturer
-
- FUJIGEN (59)
- IWATA TOOL (38)
- MAKOTOLOY (22)
- EIKOSHA (19)
- GUHRING (18)
- OSG (18)
- THE_CUT (13)
- ILIX (12)
- YAMAWA MFG (8)
- DAISHOWASEIKI (7)
- KYOWA SEIKO (7)
- OKABE (7)
- SANKO MFG (7)
- ATOM (6)
- FUKUDA (5)
- OKAZAKI SEIKO (4)
- TRUSCO NAKAYAMA (4)
- ASAHI TOOLS (3)
- DIXI (3)
- DAIICHITOOL (2)
- Nine9 (2)
- NS TOOL (2)
- RUKO (2)
- SANDVIK (2)
- 7 LEADERS (1)
- DIJET (1)
- NOGA_JAPAN (1)
- SPEED TIGER (1)
- UNION TOOL (1)
- RYOCO SEIKI (0)
- SKC (0)
- ESCO (0)
- NIKKENKOSAKU (0)
- STAR-M (0)
- ATI (0)
- MAPAL (0)
- ALPEN (0)
- TAIYO-TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Chamfering / Centering Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy