(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Turning Inserts（Page30）
[What is turning?]
A shape is created by rotating the work material and cutting the surface while pressing the cutting edge. Processing methods can be divided into outer diameter processing, threading, inner diameter processing, and cut-off processing. The model numbers written on the insert and holder are codes unique to each tool manufacturer. Understanding how to read the model number provides basic information such as shape, type, and size. In many cases, cutting conditions are written on the label of the insert case, so check it before use.
| Days to Ship |
|
|---|
-
T-Max P Insert for turning, Rhombic 35°, Lathe Negative Tip, VNMG160408-KM-3205
SANDVIK
[Features]
· Coated carbide tip.
· Diamond Shape 35° Tip
· Negative Insert
[Applications]
· For machining of cast iron
· For Medium MachiningStandard Price: MYR 115.00 Days to Ship: 8 Day(s) -
Sandvik T-Max P Lathe Negative Tip 3215
SANDVIK
[Features]
· Coated carbide tip.
· Diamond Shape 35° Tip
· Negative Insert
[Applications]
· For machining of cast iron
· For Medium MachiningStandard Price: MYR 175.08 Days to Ship: 8 Day(s) -
Sandvik CoroTurn 107 Lathe Positive Tip 3205
SANDVIK
[Features]
· Coated carbide tip for machining outer diameter and general inner diameter of small objects and parts
· Diamond Shape 35° Tip
· Positive tips
[Applications]
· For machining of cast iron
· For Rough MachiningStandard Price: MYR 122.23 Days to Ship: 10 Day(s) -
Sandvik CoroTurn 107 Lathe Positive Tip 3215
SANDVIK
[Features]
· Coated carbide tip for machining outer diameter and general inner diameter of small objects and parts
· Diamond Shape 35° Tip
· Positive tips
[Applications]
· For machining of cast ironStandard Price: MYR 85.34- Days to Ship: 8 Day(s) or more -
Sandvik CoroTurn 107 Lathe Positive Tip 1105
SANDVIK
[Features]
· Coated carbide tip for machining outer diameter and general inner diameter of small objects and parts
· Precision Grade
· Diamond Shape 35° Tip
· Positive tips
[Applications]
· For heat-resistant alloy processing
· For Semi-Finishing
· Ideal when cutting edge needs to be sharpStandard Price: MYR 184.73 Days to Ship: 10 Day(s) -
Sandvik CoroTurn 107 Lathe Positive Tip H13A
SANDVIK
[Features]
· Carbide tip for machining outer diameter and general inner diameter of small objects and parts
· Precision Grade
· Diamond Shape 35° Tip
· Positive tips
[Applications]
· For machining cast iron and heat-resistant alloys
· For Semi-Finishing
· Ideal when cutting edge needs to be sharpStandard Price: MYR 132.97- Days to Ship: 10 Day(s) -
T-Max P Insert for turning, Trigon 80°, Lathe Negative Tip, WNMG-MR
SANDVIK
[Features]
· Coated carbide tip.
· Hexagonal 80° Tip
· Negative Insert
[Applications]
· For heat-resistant alloy and stainless steel machining
· For Semi-RoughingStandard Price: MYR 87.85 Days to Ship: 10 Day(s) -
T-Max P Insert for turning, Trigon 80°, Lathe Negative Tip, WNMG080412-QM-1105
SANDVIK
[Features]
· Coated carbide tip.
· Hexagonal 80° Tip
· Negative Insert
[Applications]
· For heat-resistant alloy processing
· For Finish MachiningStandard Price: MYR 101.60 Days to Ship: 10 Day(s) -
T-Max P Insert for turning, Trigon 80°, Lathe Negative Tip, WNMG080408-MF1-1125
SANDVIK
[Features]
· Coated carbide tip.
· Hexagonal 80° Tip
· Negative InsertStandard Price: MYR 93.87 Days to Ship: 10 Day(s) -
T-Max P Insert for turning, Trigon 80°, Lathe Negative Tip 3205, WNMA/WNMG
SANDVIK
[Features]
· Coated carbide tip.
· Hexagonal 80° Tip
· Negative Insert
[Applications]
· For machining of cast ironStandard Price: MYR 102.84- Days to Ship: 10 Day(s) -
Sandvik T-Max P Lathe Negative Tip 3215
SANDVIK
[Features]
· Coated carbide tip.
· Hexagonal 80° Tip
· Negative Insert
[Applications]
· For machining of cast ironStandard Price: MYR 59.31- Days to Ship: 8 Day(s) or more -
Sandvik T-Max P Lathe Negative Tip 3215
SANDVIK
[Features]
· Coated carbide tip.
· Hexagonal 80° Tip
· Wiper Tip
· Negative Insert
[Applications]
· For machining of cast ironStandard Price: MYR 67.32- Days to Ship: 9 Day(s) or more -
Sandvik CoroThread 266 Thread-Cutting Tip
SANDVIK
[Features]
· CoroThread 266, Thread Cutting Tip
· Coated carbide tip.
· New concept tip achieves simple installation and has a high clamp rigidity guide rail
[Applications]
· For outer diameter threading
· For Whitworth 55° screws
· Processing Pitch: for 26-ThreadStandard Price: MYR 202.04 Days to Ship: 10 Day(s) -
Sandvik CoroThread 266 Thread-Cutting Tip 1125
SANDVIK
[Features]
· CoroThread 266, Thread Cutting Tip
· Coated carbide tip.
· New concept tip achieves simple installation and has a high clamp rigidity guide rail
[Applications]
· For outer diameter threadingStandard Price: MYR 279.38 Days to Ship: 10 Day(s) -
Sandvik CoroThread 266 Thread-Cutting Tip
SANDVIK
[Features]
· CoroThread 266, Thread Cutting Tip
· Coated carbide tip.
· New concept tip achieves simple installation and has a high clamp rigidity guide rail
[Applications]
· For internal threading machiningStandard Price: MYR 202.04 Days to Ship: 10 Day(s) -
Sandvik CoroThread 266 Thread-Cutting Tip 1135
SANDVIK
[Features]
· CoroThread 266, Thread Cutting Tip
· Coated carbide tip.
· New concept tip achieves simple installation and has a high clamp rigidity guide rail
[Applications]
· For internal threading machining
· For Whitworth 55° screws
· Processing Pitch: for 11-ThreadStandard Price: MYR 189.29 Days to Ship: 10 Day(s) -
Sandvik CoroThread 266 Thread-Cutting Tip
SANDVIK
[Features]
· CoroThread 266, Thread Cutting Tip
· Coated carbide tip.
· New concept tip achieves simple installation and has a high clamp rigidity guide rail
· Multi-Point
[Applications]
· For internal threading machining
· For Inch Screws
· Multi-Point Edge
· Processing Pitch: for 16-ThreadStandard Price: MYR 304.72 Days to Ship: 10 Day(s) -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PG "for Intermediate to Rough Cutting"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium to Heavy CuttingStandard Price: MYR 36.83- Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PG "for Intermediate to Rough Cutting"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium to Heavy CuttingStandard Price: MYR 48.57- Days to Ship: 5 Day(s) or more -
Square 90°, Negative, with Hole SNMG12○○PG "Semi to Rough"
KYOCERA
[Specifications]
· Shape: S (Quadrilateral)
· Number of Available Corners: 8
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium to Heavy CuttingStandard Price: MYR 48.23 Days to Ship: 6 Day(s) or more -
60° Triangle Negative with Hole TNMG16○○PG "Medium to Rough"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 6
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium to Heavy CuttingStandard Price: MYR 36.07- Days to Ship: 6 Day(s) or more -
KYOCERA
[Specifications]
· Shape: V (35° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
· Sharp edge
· Mirror Surface Specification
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 96.31 Days to Ship: 10 Day(s) or more -
KYOCERA
[Specifications]
· Shape: V (35° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 59.00- Days to Ship: 10 Day(s) or more -
80° Hexagon Type Negative with Hole WNMG08○○PG "Medium to Rough"
KYOCERA
[Specifications]
· Shape: W (Hexagon)
· Number of Available Corners: 6
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium to Heavy CuttingStandard Price: MYR 36.83- Days to Ship: 6 Day(s) or more -
EZVB (Internal Diameter, Internal Face, Profiling)
KYOCERA
[Specifications]
· Has a breaker designed for excellent chip disposal, realizing stable machining.Standard Price: MYR 118.67- Days to Ship: 9 Day(s) or more -
Negative Tip (for IK Clamp Type)
KYOCERA
[Features]
· A clamp method with a round dimple.
· Dedicated insert for IK clamping holder.
· The clamp method prevents concentration of clamp force and reduces the risk of cracks occurring.
· Even stabler machining is achieved with the unique indented shape on the insert, restraining its center as well as both sides.Standard Price: MYR 125.16 Days to Ship: 11 Day(s) or more -
Outer Diameter Threading Tip (Multi-Edged Type / Multi-Edged Tip) ISO (Metric)
ISCAR
[Features]
· Multi-edged threading tips consist of 2 to 3 blades for a reduced number of passes and a shorter machining time (ultra-high productivity tips.)Standard Price: MYR 308.06 Days to Ship: 10 Day(s) or more -
Standard Price: MYR 109.89 Days to Ship: 6 Day(s) or more -
Standard Price: MYR 165.08- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 102.07- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 183.27- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 72.19- Days to Ship: 4 Day(s) or more -
Insert For Bore Type 6-Corner Shoulder Cutter TNKU
OSG
[Features]
· The thick insert gives improved rigidity and together with the positive rake angle provides good cracking resistance and enables the machining of L/D = 5D long protrusions.Standard Price: MYR 124.97- Days to Ship: 9 Day(s) or more -
OSG
[Features]
· 4 tools in one.
Flattening the bases of holes.
High-efficiency machining of internal diameters.- Volume Discount
Standard Price: MYR 69.35- Days to Ship: 9 Day(s) or more -
Triangle-Shape With Hole, Positive 7°, TCMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 30.37- Days to Ship: 10 Day(s) or more -
Triangle-Shape with Hole, Positive 11°, TPMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 30.37- Days to Ship: 10 Day(s) or more -
Triangle-Shape With Hole, Negative, TNMG-EM, For Medium To Rough Cutting
SUMITOMO_ELEC_
[Features]
· Breaker featuring both excellent chipping-resistance as well as crater wear-resistance.Standard Price: MYR 34.54- Days to Ship: 10 Day(s) or more -
Standard Price: MYR 31.39- Days to Ship: 10 Day(s) or more -
Triangle-Shaped With Hole, Negative, TNMG-FE, For Detailed Cutting
SUMITOMO_ELEC_
[Features]
· Breaker with excellent performance in chip control for low- to high-feed machining.Standard Price: MYR 31.39- Days to Ship: 10 Day(s) or more -
Square-Shape With Hole, Positive 11°, SPMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 35.56- Days to Ship: 10 Day(s) or more -
Square-Shape With Hole, Negative, SNMG-EM, For Medium To Rough Cutting
SUMITOMO_ELEC_
[Features]
· Breaker featuring both excellent chipping-resistance as well as crater wear-resistance.Standard Price: MYR 39.73- Days to Ship: 10 Day(s) or more -
Square-Shape With Hole, Positive 7°, SCMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 38.71- Days to Ship: 10 Day(s) or more -
35° Diamond-Shape With Hole, Positive 5°, VBGT○○○-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates a specialized carbide base material and Absotech Platinum coating.
· Significantly reduces defects and damage while providing improved wear-resistance in stainless steel machining.Standard Price: MYR 49.41 Days to Ship: 10 Day(s) or more -
35° Diamond-Shape With Hole, Positive 5°, VBGT○○○-SI, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates Absotech Bronze PVD coating and a specialized, tough carbide base material.
· The high-quality cutting edge reduces adhesion and micro-chipping, allowing for excellent machining surface finish quality.Standard Price: MYR 62.55- Days to Ship: 10 Day(s) or more -
35° Diamond-Shape With Hole, Positive 7°, VCMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 48.07- Days to Ship: 10 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | ISCAR | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | OSG | OSG | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ |
| Product Series | T-Max P Insert for turning, Rhombic 35°, Lathe Negative Tip, VNMG160408-KM-3205 | T-Max P Insert for turning, Trigon 80°, Lathe Negative Tip, WNMG-MR | T-Max P Insert for turning, Trigon 80°, Lathe Negative Tip, WNMG080412-QM-1105 | T-Max P Insert for turning, Trigon 80°, Lathe Negative Tip, WNMG080408-MF1-1125 | T-Max P Insert for turning, Trigon 80°, Lathe Negative Tip 3205, WNMA/WNMG | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PG "for Intermediate to Rough Cutting" | Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PG "for Intermediate to Rough Cutting" | 60° Triangle Negative with Hole TNMG16○○PG "Medium to Rough" | 80° Hexagon Type Negative with Hole WNMG08○○PG "Medium to Rough" | Outer Diameter Threading Tip (Multi-Edged Type / Multi-Edged Tip) ISO (Metric) | Outer Diameter Grooving Chip GBA43 with 3D Breaker (GM Breaker) | Small Bore Slotting Tip (for Models GIV, GIV-E, GIV-W), 2 Corner Specification | Small Bore Slotting Tip (for Models GIV, GIV-E, GIV-W), 2 Corner Specification, Full Radius Groove | Small Bore Slotting Tip (for Models GIV, GIV-E), 1 Corner Specification | Triangle-Shape With Hole, Positive 7°, TCMT-LB, For Light Cutting | Triangle-Shape with Hole, Positive 11°, TPMT-LB, For Light Cutting | Triangle-Shape With Hole, Negative, TNMG-EM, For Medium To Rough Cutting | Triangle-Shape With Hole, Negative, TNMG○○○-FB, For Detailed Cutting | Triangle-Shaped With Hole, Negative, TNMG-FE, For Detailed Cutting | Square-Shape With Hole, Positive 11°, SPMT-LB, For Light Cutting | Square-Shape With Hole, Negative, SNMG-EM, For Medium To Rough Cutting | Square-Shape With Hole, Positive 7°, SCMT-LB, For Light Cutting | 35° Diamond-Shape With Hole, Positive 5°, VBGT○○○-LB, For Light Cutting | 35° Diamond-Shape With Hole, Positive 5°, VBGT○○○-SI, For Light Cutting | 35° Diamond-Shape With Hole, Positive 7°, VCMT-LB, For Light Cutting | ||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) | 8 Day(s) | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 8 Day(s) or more | 9 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more |
| Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | W (Hexagonal Type) | Other | C (80° Diamond-Shape) | - | Other | Other | Other | Other | Other | T (Triangle) | Other | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | S (Rectangular) | S (Rectangular) | S (Rectangular) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) |
| work material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Stainless Steel / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel | Steel | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel | Cast Iron | Steel / Stainless Steel | Steel / Stainless Steel / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Other | Other | Outer Diameter/Inner Diameter | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | - | - | - | - | - | Outer Diameter/Inner Diameter | - | - | - | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - |
| Available corners | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4 | 4 | 8 | 6 | 4 | 4 | 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Breaker Use | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Medium to deep grinding | Medium to deep grinding | Medium to deep grinding | Medium to deep grinding | Medium grinding | Medium grinding | Medium to deep grinding | - | Finish | - | - | - | - | - | - | - | - | Light Cutting | Light Cutting | Medium to coarse grinding | - | - | Light Cutting | Medium to coarse grinding | Light Cutting | Light Cutting | Light Cutting | Light Cutting |
| Rake angle | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | - | - | - | - | - | - | - | - | - | - | Positive | Positive | Negative | Negative | Negative | Positive | Negative | Positive | Positive | Positive | Positive |
| Nose R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.4 ～ 1.6 | 0.4 ～ 1.6 | 0.8 ～ 1.2 | 0.4 ～ 1.2 | 0.2 ～ 0.4 | 0.2 ～ 0.4 | 0.4 ～ 1.6 | Other | 0.8 | - | 0.4 ～ Other | Other | 0.2 | Other | 0.2 | 0.8 | - | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.8 ～ Other | 0.2 ～ 0.8 | 0.2 ～ 1.2 | 0.4 ～ 0.8 | 0.8 ～ Other | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.2 ～ Other | 0.2 ～ 0.8 |
| Selfishly | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Right-hand | - | Right-hand | Right-hand | Right-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Right-hand | - | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand | Right-hand / Left-hand / No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand |
| Groove Width (For Grooving / Plunging) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.5 ～ 4 | 2 ～ 4 | 1 ～ 5 | 2 | 1 ～ 3.4 | - | 0.2 mm ～ 0.8 mm | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Internal Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape
-
work material
-
Application
-
Available corners
-
Breaker Use
-
Rake angle
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Turning Inserts
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy