(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Turning Inserts（Breaker Use：Finish Page8）
[What is turning?]
A shape is created by rotating the work material and cutting the surface while pressing the cutting edge. Processing methods can be divided into outer diameter processing, threading, inner diameter processing, and cut-off processing. The model numbers written on the insert and holder are codes unique to each tool manufacturer. Understanding how to read the model number provides basic information such as shape, type, and size. In many cases, cutting conditions are written on the label of the insert case, so check it before use.
| Days to Ship |
|
|---|
-
Kyocera Turning Insert PV720 PVD Cermet (TNMG/TPGB)
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningStandard Price: MYR 31.11- Days to Ship: 10 Day(s) -
Kyocera Turning Insert PR1225 PVD Coating
KYOCERA
[Features]
· PR1225: Ultrafine particle carbide substrate and MEGACOAT with superior wear resistance and heat resistance.
· Supports a wide range from carbon steel to stainless steel.
[Applications]
· For lathe turning
· PR1225: The foremost recommended PVD coating for stainless steel precision machiningStandard Price: MYR 33.68 Days to Ship: 10 Day(s) -
Kyocera Turning Insert TN620 Cermet
KYOCERA
[Features]
· TN620: Special reinforcing technology (hybrid technology) achieves both superior fracture resistance and wear resistance.
· Achieves stable machining of steel and an excellent finished surface.
[Applications]
· For lathe turning
· TN620: The foremost recommended cermet for steel machiningStandard Price: MYR 20.36- Days to Ship: 8 Day(s) or more -
Kyocera Turning Insert CA510 CVD Coating
KYOCERA
[Features]
· CA510: Special substrate with excellent high-temperature distortion resistance properties and a tough, thick film coating with excellent abrasion resistance.
· Supports both high-speed and high-feed machining.
[Applications]
· For lathe turning
· CA510: High-speed/high-efficiency steel machiningStandard Price: MYR 30.83 Days to Ship: 10 Day(s) -
Kyocera Turning Insert CA515 CVD Coating
KYOCERA
[Features]
· CA515: Abrasion resistance and stability are improved with a special substrate with excellent high-temperature distortion resistance properties and a high-hardness, tough film with a reinforced interface.
· Supports light intermittent machining of steel.
[Applications]
· For lathe turning
· CA515: For high-speed steel machining (wide coverage from finishing to light intermittent machining)Standard Price: MYR 30.83- Days to Ship: 8 Day(s) or more -
Kyocera Turning Insert CA525 CVD Coating
KYOCERA
[Features]
· CA525: Special substrate with excellent high-temperature distortion resistance properties and toughened film with a reinforced interface achieve stable machining and long life.
· Our first recommendation for intermittent through general machining of steel.
[Applications]
· For lathe turning
· CA525: The foremost recommended general purpose grade supporting rough to intermittent machining of steelStandard Price: MYR 30.83 Days to Ship: 10 Day(s) -
Kyocera Turning Insert CA530 CVD Coating
KYOCERA
[Features]
· CA530: Special tough substrate with high stability and tough coating with excellent abrasion resistance.
· Supports general to heavy intermittent machining of steel (with a focus on stability).
[Applications]
· For lathe turning
· CA530: Supports general purpose to heavy intermittent machining of steel (focus on stability)Standard Price: MYR 30.83 Days to Ship: 10 Day(s) -
Kyocera Turning Insert PR1225 PVD Coating
KYOCERA
[Features]
· PR1225: Ultrafine particle carbide substrate and MEGACOAT with superior wear resistance and heat resistance.
· Supports a wide range from carbon steel to stainless steel.
[Applications]
· For lathe turning
· PR1225: The foremost recommended PVD coating for stainless steel precision machiningStandard Price: MYR 33.68 Days to Ship: 10 Day(s) -
Kyocera Turning Insert PV720 PVD Cermet (TPMT/VBET)
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningStandard Price: MYR 24.55- Days to Ship: 10 Day(s) -
Kyocera Turning Insert TN620 Cermet
KYOCERA
[Features]
· TN620: Special reinforcing technology (hybrid technology) achieves both superior fracture resistance and wear resistance.
· Achieves stable machining of steel and an excellent finished surface.
[Applications]
· For lathe turning
· TN620: The foremost recommended cermet for steel machiningStandard Price: MYR 20.36- Days to Ship: 8 Day(s) or more -
Kyocera Turning Insert CA510 CVD Coating
KYOCERA
[Features]
· CA510: Special substrate with excellent high-temperature distortion resistance properties and a tough, thick film coating with excellent abrasion resistance.
· Supports both high-speed and high-feed machining.
[Applications]
· For lathe turning
· CA510: High-speed/high-efficiency steel machiningStandard Price: MYR 50.70- Days to Ship: 10 Day(s) -
Kyocera Turning Insert CA530 CVD Coating
KYOCERA
[Features]
· CA530: Special tough substrate with high stability and tough coating with excellent abrasion resistance.
· Supports general to heavy intermittent machining of steel (with a focus on stability).
[Applications]
· For lathe turning
· CA530: Supports general purpose to heavy intermittent machining of steel (focus on stability)Standard Price: MYR 76.71- Days to Ship: 8 Day(s) or more -
Kyocera Turning Insert PV720 PVD Cermet
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningStandard Price: MYR 42.70- Days to Ship: 10 Day(s) -
Kyocera Turning Insert CA510 CVD Coating
KYOCERA
[Features]
· CA510: Special substrate with excellent high-temperature distortion resistance properties and a tough, thick film coating with excellent abrasion resistance.
· Supports both high-speed and high-feed machining.
[Applications]
· For lathe turning
· CA510: High-speed/high-efficiency steel machiningStandard Price: MYR 48.61- Days to Ship: 8 Day(s) or more -
Kyocera Turning Insert CA530 CVD Coating
KYOCERA
[Features]
· CA530: Special tough substrate with high stability and tough coating with excellent abrasion resistance.
· Supports general to heavy intermittent machining of steel (with a focus on stability).
[Applications]
· For lathe turning
· CA530: Supports general purpose to heavy intermittent machining of steel (focus on stability)Standard Price: MYR 48.61 Days to Ship: 10 Day(s) -
Kyocera Turning Insert PV720 PVD Cermet
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningStandard Price: MYR 40.31- Days to Ship: 8 Day(s) or more -
Kyocera Turning Insert CA510 CVD Coating
KYOCERA
[Features]
· CA510: Special substrate with excellent high-temperature distortion resistance properties and a tough, thick film coating with excellent abrasion resistance.
· Supports both high-speed and high-feed machining.
[Applications]
· For lathe turning
· CA510: High-speed/high-efficiency steel machiningStandard Price: MYR 36.83- Days to Ship: 6 Day(s) or more -
Kyocera Turning Insert CA530 CVD Coating
KYOCERA
[Features]
· CA530: Special tough substrate with high stability and tough coating with excellent abrasion resistance.
· Supports general to heavy intermittent machining of steel (with a focus on stability).
[Applications]
· For lathe turning
· CA530: Supports general purpose to heavy intermittent machining of steel (focus on stability)Standard Price: MYR 38.28 Days to Ship: 10 Day(s) -
Kyocera Turning Insert PV720 PVD Cermet
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningStandard Price: MYR 31.11- Days to Ship: 8 Day(s) or more -
Kyocera Turning Insert CA510 CVD Coating
KYOCERA
[Features]
· CA510: Special substrate with excellent high-temperature distortion resistance properties and a tough, thick film coating with excellent abrasion resistance.
· Supports both high-speed and high-feed machining.
[Applications]
· For lathe turning
· CA510: High-speed/high-efficiency steel machiningStandard Price: MYR 36.83- Days to Ship: 6 Day(s) or more -
Kyocera Turning Insert CA530 CVD Coating
KYOCERA
[Features]
· CA530: Special tough substrate with high stability and tough coating with excellent abrasion resistance.
· Supports general to heavy intermittent machining of steel (with a focus on stability).
[Applications]
· For lathe turning
· CA530: Supports general purpose to heavy intermittent machining of steel (focus on stability)Standard Price: MYR 38.28 Days to Ship: 10 Day(s) -
Kyocera Turning Insert PV720 PVD Cermet
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningStandard Price: MYR 31.11 Days to Ship: 10 Day(s) -
Negative Tip (for IK Clamp Type)
KYOCERA
[Features]
· A clamp method with a round dimple.
· Dedicated insert for IK clamping holder.
· The clamp method prevents concentration of clamp force and reduces the risk of cracks occurring.
· Even stabler machining is achieved with the unique indented shape on the insert, restraining its center as well as both sides.Standard Price: MYR 125.16 Days to Ship: 11 Day(s) or more -
55° Diamond-Shape With Hole, Positive 7°, DCGT○○○-FYS, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates Absotech Bronze PVD coating and a specialized, tough carbide base material.
· The high-quality cutting edge reduces adhesion and micro-chipping, allowing for excellent machining surface finish quality.Standard Price: MYR 64.99- Days to Ship: 8 Day(s) or more -
80° Diamond-Shape With Hole, Positive 7°, CCGT○○○-FY, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates Absotech Bronze PVD coating and a specialized, tough carbide base material.
· The high-quality cutting edge reduces adhesion and micro-chipping, allowing for excellent machining surface finish quality.Standard Price: MYR 69.48 Days to Ship: 10 Day(s) or more -
80° Diamond-Shape With Hole, Positive 7°, CCGT○○○-FYS, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates Absotech Bronze PVD coating and a specialized, tough carbide base material.
· The high-quality cutting edge reduces adhesion and micro-chipping, allowing for excellent machining surface finish quality.Standard Price: MYR 69.48 Days to Ship: 10 Day(s) or more -
80° Diamond-Shape With Hole, Positive 7°, CCGT-T○○○-FX, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates Absotech Bronze PVD coating and a specialized, tough carbide base material.
· The high-quality cutting edge reduces adhesion and micro-chipping, allowing for excellent machining surface finish quality.Standard Price: MYR 76.79 Days to Ship: 10 Day(s) or more -
KYOCERA
[Features]
· High film adhesion strength prevents peeling and achieves stable machining
· Hard surface coating: Abrasion resistance is improved with the adoption of a hard surface coating
· High performance α-Al2O3 film: Excellent abrasion resistance and fracture resistance
· High adhesion strength interface: Crystalline structure improvements increase film adhesion strength between each layer
· Fine TiCN coating: Finer TiCN crystals increase hardness and improve abrasion resistanceStandard Price: MYR 38.70 Days to Ship: 6 Day(s) or more -
KYOCERA
[Features]
· High film adhesion strength prevents peeling and achieves stable machining
· Hard surface coating: Abrasion resistance is improved with the adoption of a hard surface coating
· High performance α-Al2O3 film: Excellent abrasion resistance and fracture resistance
· High adhesion strength interface: Crystalline structure improvements increase film adhesion strength between each layer
· Fine TiCN coating: Finer TiCN crystals increase hardness and improve abrasion resistanceStandard Price: MYR 35.58- Days to Ship: 6 Day(s) or more -
KYOCERA
[Features]
· High film adhesion strength prevents peeling and achieves stable machining
· Hard surface coating: Abrasion resistance is improved with the adoption of a hard surface coating
· High performance α-Al2O3 film: Excellent abrasion resistance and fracture resistance
· High adhesion strength interface: Crystalline structure improvements increase film adhesion strength between each layer
· Fine TiCN coating: Finer TiCN crystals increase hardness and improve abrasion resistanceStandard Price: MYR 40.39- Days to Ship: 6 Day(s) or more -
KYOCERA
[Features]
· High film adhesion strength prevents peeling and achieves stable machining
· Hard surface coating: Abrasion resistance is improved with the adoption of a hard surface coating
· High performance α-Al2O3 film: Excellent abrasion resistance and fracture resistance
· High adhesion strength interface: Crystalline structure improvements increase film adhesion strength between each layer
· Fine TiCN coating: Finer TiCN crystals increase hardness and improve abrasion resistanceStandard Price: MYR 35.58- Days to Ship: 6 Day(s) or more -
KYOCERA
[Features]
· High film adhesion strength prevents peeling and achieves stable machining
· Hard surface coating: Abrasion resistance is improved with the adoption of a hard surface coating
· High performance α-Al2O3 film: Excellent abrasion resistance and fracture resistance
· High adhesion strength interface: Crystalline structure improvements increase film adhesion strength between each layer
· Fine TiCN coating: Finer TiCN crystals increase hardness and improve abrasion resistanceStandard Price: MYR 35.58- Days to Ship: 6 Day(s) or more -
Negative Type Wiper Tip CNMG (WF Breaker)
KYOCERA
[Features]
· New design wiper cutting blade shape achieves high efficiency machining
· WF breaker (improved finished surface quality)
· Excellent scrap processing performance improves cutting performance in finishing region
· Suppresses tearing, excellent finished surface qualityStandard Price: MYR 32.96- Days to Ship: 6 Day(s) or more -
Negative Type Wiper Tip DNMX (WF Breaker)
KYOCERA
[Features]
· New design wiper cutting blade shape achieves high efficiency machining
· WF breaker (improved machining efficiency)
· Supports high feed rates to reduce machining time
· Achieves high efficiency machining
· Excellent scrap processing performance over a wide range of machining tasksStandard Price: MYR 43.09- Days to Ship: 6 Day(s) or more -
Negative Type Wiper Tip TNMX (WF Breaker)
KYOCERA
[Features]
· New design wiper cutting blade shape achieves high efficiency machining
· WF breaker (improved machining efficiency)
· Supports high feed rates to reduce machining time
· Achieves high efficiency machining
· Excellent scrap processing performance over a wide range of machining tasksStandard Price: MYR 32.96- Days to Ship: 6 Day(s) or more -
Negative Type Wiper Tip WNMG (WF Breaker)
KYOCERA
[Features]
· New design wiper cutting blade shape achieves high efficiency machining
· WF breaker (improved machining efficiency)
· Supports high feed rates to reduce machining time.
· Achieves high efficiency machining
· Excellent scrap processing performance over a wide range of machining tasksStandard Price: MYR 32.96- Days to Ship: 6 Day(s) or more -
Square-Shape With Hole, Negative, SNMG-EF, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for finishing with excellent chip control.Standard Price: MYR 39.73- Days to Ship: 10 Day(s) or more -
Standard Price: MYR 62.55 Days to Ship: 10 Day(s) or more -
80° Diamond-Shape With Hole And Wiper Edge, Positive 11°, CPMT-LUW, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· High-performance breaker for finishing, with wiper edge.Standard Price: MYR 34.60 Days to Ship: 10 Day(s) or more -
Hexagon-Shape With Hole And Wiper Edge, Negative, WNMG-SEW, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Breaker with wiper edge for new high-feed finishing.
· Because this product conforms to ISO standards, machining program corrections are not necessary for use.Standard Price: MYR 32.86- Days to Ship: 10 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ |
| Product Series | 55° Diamond-Shape With Hole, Positive 7°, DCGT○○○-FYS, For Finish Cutting | 80° Diamond-Shape With Hole, Positive 7°, CCGT○○○-FY, For Finish Cutting | 80° Diamond-Shape With Hole, Positive 7°, CCGT○○○-FYS, For Finish Cutting | 80° Diamond-Shape With Hole, Positive 7°, CCGT-T○○○-FX, For Finish Cutting | Square-Shape With Hole, Negative, SNMG-EF, For Finish Cutting | 35° Diamond-Shape With Hole, Positive 5°, VBGT○○○-L-FYS, For Finish Cutting | 80° Diamond-Shape With Hole And Wiper Edge, Positive 11°, CPMT-LUW, For Finish Cutting | Hexagon-Shape With Hole And Wiper Edge, Negative, WNMG-SEW, For Finish Cutting | ||||||||||||||||||||||||||||||||
| Days to Ship | 10 Day(s) | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) | 11 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more |
| Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | C (80° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | W (Hexagonal Type) | S (Rectangular) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | W (Hexagonal Type) |
| work material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron | Steel | Steel |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | - | - | - | - | - | - | - | - | - | Outer Diameter/Inner Diameter | - | - |
| Available corners | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Breaker Use | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish |
| Rake angle | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Positive | Positive | Positive | Positive | Negative | Positive | Positive | Positive | Positive | Negative | Negative | Negative | Negative | Negative | Positive | Positive | Negative |
| Nose R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.8 | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.8 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.2 ～ Other | 0.4 ～ 0.8 | 0.4 ～ 1.2 |
| Selfishly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | - | - | - | - | - | - | - | - | - | No-hand | Left-hand | No-hand | No-hand |
| Groove Width (For Grooving / Plunging) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape
- C (80° Diamond-Shape)
- D (55° Diamond-Shape)
- R (Circular)
- S (Rectangular)
- T (Triangle)
- V (35° Diamond-Shaped)
- W (Hexagonal Type)
- Other
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Application
- Outer Diameter/Inner Diameter
- Grooving / Parting
- Threading
- Other
-
Available corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Breaker Use
- Finish
- Medium grinding
- Medium to deep grinding
- Heavy cutting
- Light Cutting
- Rough cutting
- Medium to coarse grinding
-
Rake angle
- Negative
- Positive
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
Narrow search by specifying Manufacturer
-
- KYOCERA (155)
- SUMITOMO_ELEC_ (138)
- SANDVIK (41)
- ISCAR (20)
- DIJET (0)
- ECHAIN (0)
- SANWASEISAKUSYO (0)
- WIDIA (0)
- NOGA_JAPAN (0)
- KOSHUHA (0)
- NGK SPARK PLUG (0)
- TUNGALOY (0)
- OSG (0)
- DAISHOWASEIKI (0)
CAD
-
- 2D
- 3D
Related Categories to Turning Inserts
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy