(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Inserts (for Milling)（work material：High Hardness Material Page2）
A type of milling cutter. Cutting edge and shank are separate parts and fixed with screws, etc. It is sometimes called an insert. Major Japanese cutting manufacturer products are now expanding their areas of activity in the world manufacturing industry, and MISUMI also develops its own brand products and offers them to customers.
| Days to Ship |
|
|---|
-
CoroMill R216 Ball End Mill Tip
SANDVIK
Ball end mill insert for semi-finishing profiling that achieves high productivity and high discharge amount of cutting chip
Standard Price: MYR 205.90- Days to Ship: 7 Day(s) or more -
Standard Price: MYR 128.95 Days to Ship: 10 Day(s) -
Standard Price: MYR 99.05- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 121.68- Days to Ship: 10 Day(s) -
Standard Price: MYR 163.90 Days to Ship: 10 Day(s) -
PFR Phoenix Series Insert for Radius End Mills for Finishing
OSG
It is an insert with high corner radius accuracy, full profile bottom edge, and special treatment to improve the cutting edge strength. Good machining accuracy can be obtained.
- Volume Discount
Standard Price: MYR 224.05- Days to Ship: 4 Day(s) or more -
Phoenix Series PSE Insert for Shoulder
OSG
Insert for shoulder milling cutter series, PSE. The insert material and chip breaker shape can be selected according to the work material and machining mode.
Standard Price: MYR 64.16- Days to Ship: 4 Day(s) or more -
(Integrated) Insert for CoroMill 331 (Part Number List)
SANDVIK
A high-precision multi-purpose side milling cutter. [Features]·Diameter 40-315 mm· Shipped with the edge width tolerance preset to ±0.01 mm· Radial runout is ±0.02 mm.· Wide pocket· Strong clamping by wedge· Serration method· Adjustment range is 2-3 mm.· Unique spring-loaded mechanism for smooth adjustment and slip prevention
Standard Price: MYR 115.42- Days to Ship: 10 Day(s) or more -
Face Milling Cutter 75° (15°) S...ED
SANDVIK
[Features]
An insert for face milling cutters.
For face milling.Standard Price: MYR 165.42 Days to Ship: 10 Day(s) -
Milling Insert For CoroMill 490
SANDVIK
Shoulder face milling cutter with amazing performance
● Wide range of applications
Capable of face milling, shoulder milling, grooving and contouring
Improved proximity with the introduction of an oversized cutter
● Amazing productivity
Achieves high cutting conditions with a highly rigid body
High insert mounting rigidity due to flat insert seat
● Outstanding machining accuracy
Low resistance and high accuracy due to sharp tip
Both the bottom and sides are processed with high precision
●GC4330, GC4340
CVD grade for steel milling, ideal for versatile CoroMill® 490
The Inveio coating provides excellent abrasion resistance and long tool lifespanStandard Price: MYR 742.03 Days to Ship: 10 Day(s) -
Wiper Insert For CoroMill 345 - PW5, KW5PW8, KW8
SANDVIK
First choice for face milling machine with high productivity
8-corner inserts have achieved high cost-effective machiningStandard Price: MYR 200.65- Days to Ship: 10 Day(s) -
T-Max Long-Edge Insert For Milling
SANDVIK
Long edge milling cutter for finishing T-Max?tip for long edge
Standard Price: MYR 124.60 Days to Ship: 10 Day(s) -
Insert For Auto AF Finishing, N260.8-FN260.8-L
SANDVIK
Adopting a unique grade and shape using cutting-edge technology to demonstrate high performance
Standard Price: MYR 1,165.83 Days to Ship: 10 Day(s) -
Finishing Insert For Auto FS, SBENSBEXSBEX-11
SANDVIK
Adopting a unique grade and shape using cutting-edge technology to demonstrate high performance
Standard Price: MYR 167.46 Days to Ship: 10 Day(s) -
SANDVIK
Face milling machine inserts that increase competitiveness and support to maintain high productivity
Standard Price: MYR 136.44 Days to Ship: 10 Day(s) -
Inch-Version Insert For CoroMill 300
SANDVIK
[Features]
Insert for CoroMill 300.
A sturdy, non-chipping type thread-rolling cylindrical die insert.
Its low cutting resistance means it can even be used with low mechanical power or under unstable conditions.
For profiling and face milling of stainless steel.
Suitable for semi-roughing, restriking, semi-finishing, for complex profiling of molding materials, turbine blades, etc.Standard Price: MYR 80.51- Days to Ship: 10 Day(s) -
Insert For CoroMill 210 - R210-E-M
SANDVIK
[Features]
Insert for CoroMill 210.
Carbide-coated insert.
Can be used for high feed machining.
For milling of high-hardness materials
For high-feed machining
For plungingStandard Price: MYR 97.43- Days to Ship: 10 Day(s) -
Insert For CoroMill R216 Ball End Mill, R216-E-M
SANDVIK
[Features]
Allows for high cutting conditions
The same inserts are used for the center blade and peripheral cutting edge
For profiling
For molding
Ideal for everything from roughing right through to semi-finishing-type profilingStandard Price: MYR 248.40- Days to Ship: 10 Day(s) or more -
Insert For Interchangeable-Blade-Type Face Milling Cutter CoroMill 345 - 345R
SANDVIK
First choice cutter when high productivity is top priority
[Features]
Exhibits high rigidity and toughness
Excellent performance even with a combination of large depth of cut and high feed per toothStandard Price: MYR 173.99 Days to Ship: 10 Day(s) -
Mirror Bore Only, Mirror S Tip, BNM-TG Shape
DIJET
Blade tip enhanced-type tips for high-hardness materials are newly added to the product range of "Mirror Ball BNM/MBN Type" for high-precision mold finish machining
[Features]
· Reinforced blade tip type that brings out its best under harsh conditions such as long projection length machining, overlay machining, and multiple work material simultaneous cutting.
· Features the new material "DH102", a combination of the new PVD coating "New DH (Dijet Hard) Coat" for high-hardness materials/high-speed machining and micro grain carbide for high-hardness materials.
· The negative blade shape provides long service life even in high-speed machining of high-hardness materials exceeding 60 HRC.Standard Price: MYR 274.21- Days to Ship: 9 Day(s) or more -
DIJET
"Mirror Radius RNM/MRN" insert for high-speed high-efficiency machining of molds, usable for medium finishing to finishing and also supports high hardness materials.
· [Features]
· Uses new material "DH102," a combination of "New DH (Dijet Hard) Coating" (a new PVD coating for hardened materials and high speed machining) and a micrograin ultra-hard alloy for hardened materials to attain long-life use. JC8015 material is available for general steel, etc.
· A positive blade shape is used, like the conventional HRM type, with low cutting resistance and favorable cutting quality.
· Tools can be consolidated by using 1 holder and changing the insert, handling from rough machining to finishing of any work material.Standard Price: MYR 340.51- Days to Ship: 5 Day(s) or more -
Dedicated Radius Insert For Mirror Ball, GRM Type, Large Radius Type
DIJET
[Features]
· Radius insert for shaping.
· Excellent surface roughness, enabling shortening of the polishing process.
· The radius shape makes the tool diameter larger than a ball end mill with the same radius size, which provides high main body rigidity and suppresses chattering during machining and allows for larger pick feeds to improve machining efficiency.
· High accuracy / high efficiency machining can be performed even on machines with low speed rotation.Standard Price: MYR 475.93 Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Shape (initial letter of model number) |
| work material |
| Clearance angle |
| Available corners |
| Data for CAM / Tool Management Software |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | OSG | OSG | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | DIJET | DIJET | DIJET |
| Product Series | PFR Phoenix Series Insert for Radius End Mills for Finishing | Insert For Interchangeable-Blade-Type Face Milling Cutter CoroMill 345 - 345R | Dedicated Radius Insert For Mirror Ball, GRM Type, Large Radius Type | |||||||||||||||||||
| CAD | ||||||||||||||||||||||
| Days to Ship | 7 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 10 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) or more | 10 Day(s) | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more |
| Shape (initial letter of model number) | Other | S (Square) | S (Square) | P (Regular pentagon) | T (Equilateral Triangle Type) | Other | Other | Other | S (Square) | Other | S (Square) | L (Rectangular) | S (Square) | S (Square) | S (Square) | R (Circular) | S (Square) | Other | S (Square) | Other | Other | Other |
| work material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material |
| Clearance angle | Other | C(7°） | N(0°） | N(0°） | N(0°） | - | D(15°） | N(0°） | P (11°) | Other | N(0°） | N(0°） | Other | Other | E(20°） | D(15°） | C(7°） | Other | N(0°） | Other | Other | - |
| Available corners | 2 | 4 | 4 | 5 | 3 | - | - | 2 | 4 | 1 | 4 | 4 | 4 | 4 | 4 | Other | 4 | 2 | 4 | - | - | - |
| Data for CAM / Tool Management Software | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape (initial letter of model number)
- O (Regular octagon)
- P (Regular pentagon)
- S (Square)
- T (Equilateral Triangle Type)
- C (80° Diamond-Shape)
- E (75°Diamond Shape)
- A (85° parallelogram)
- B (82° Parallelogram)
- L (Rectangular)
- W (Hexagonal Type)
- R (Circular)
- Other
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Clearance angle
- C(7°）
- P (11°)
- D(15°）
- E(20°）
- F(25°）
- N(0°）
- Other
-
Available corners
- 1
- 2
- 3
- 4
- 5
- 6
- 8
- Other
-
Data for CAM / Tool Management Software
- zoller
Narrow search by specifying Manufacturer
-
- SANDVIK (30)
- DIJET (22)
- ISCAR (5)
- OSG (3)
- ASAHI TOOLS (1)
- HITACHI TOOL (1)
- KYOCERA (1)
- SUMITOMO_ELEC_ (1)
- WIDIA (0)
- NIKKENKOSAKU (0)
- THE_CUT (0)
- TUNGALOY (0)
- NACHI (0)
- DAISHOWASEIKI (0)
- NGK SPARK PLUG (0)
CAD
-
- 2D
- 3D
Related Categories to Inserts (for Milling)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy