(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Radius End Mills (Carbide)（Machining Application：Groove）
| Days to Ship |
|
|---|
-
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: MYR 299.13- Days to Ship: 4 Day(s) or more -
DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model
MISUMI
In addition to the standard products, the radius can be selected extensively for manufactured products
- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
(Economy series) XAL series carbide radius end mill, 2-flute / short model
MISUMI
Radius end mills are available at low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: MYR 87.64- Days to Ship: 4 Day(s) or more -
VAC Series Carbide 2-Flute Radius End Mill
MISUMI
[Features]
·Cutting edge radius also reinforced cutting edge rigid
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 214.81- Days to Ship: 4 Day(s) or more -
Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose
OSG
Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
- Volume Discount
Standard Price: MYR 778.59- Days to Ship: 5 Day(s) or more -
CNRS 4-flute radius for machining titanium and super heat-resistant alloys
UNION TOOL
[Features]
· High Efficiency 4-Flute Radius for Machining Titanium / Super Heat Resistant Alloy
· Life-span increasing UT coating suitable for heat resistant and difficult to cut materials
· Variable split, high torsion and positive rake angle design enables stable machining
· A blade design that reduces the cutting resistance in helical and inclined use, etc.Standard Price: MYR 557.34- Days to Ship: 6 Day(s) or more -
Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC
KYOWA SEIKO
[Specifications]
· Shape: Radius End Mill (carbide)
· Material: Super Micro Grain Alloy
· Work Materials: Aluminum [◎], Copper [◎]
[Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting- Volume Discount
Standard Price: MYR 397.90- Days to Ship: 6 Day(s) or more -
MISUMI
Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: MYR 594.78- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: MYR 374.66- Days to Ship: 4 Day(s) or more -
XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
MISUMI
3-flute 45° helix radius that's resistant to chattering is available at an affordable price
- Volume Discount
- XAL
- General Steel
- 3 Flutes
Days to Ship: 4 Day(s) or more -
XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
MISUMI
4-Flute Radius for High-Efficiency and High-Speed Machining
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Days to Ship: 7 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Standard Price: MYR 315.37- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
MISUMI
[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Standard Price: MYR 255.89- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type
MISUMI
[Features]
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]
·Radius type of multi-function end mill
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 2-flute stub model
MISUMI
[Features]
·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Standard Price: MYR 164.79- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 2-flute / short model
MISUMI
[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 2-flute / regular model
MISUMI
[Features]
·General purpose 2-flute end mill with regular flute length type with cutting edge radius
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model
MISUMI
[Features]
·Suppresses chattering by adopting short flute length and back taper shape on peripheral edge
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model
MISUMI
By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Standard Price: MYR 337.53- Days to Ship: 4 Day(s) or more -
TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type
MISUMI
The popular radius type for stainless steel processing is also effective in preventing chipping
- Volume Discount
- TS
- SUS
- 3 Flutes
- S (Short)
Standard Price: MYR 427.81- Days to Ship: 4 Day(s) or more -
DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
MISUMI
The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model
MISUMI
Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
MISUMI
Radius type that's also effective in preventing cutter marks
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
MISUMI
Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
Standard Price: MYR 356.86- Days to Ship: 4 Day(s) or more -
Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model
MISUMI
Small radius type that prevents cutter marks on resin
- Volume Discount
- Non-Coated
- Resin
- 2 Flutes
- R (Regular)
Standard Price: MYR 182.81- Days to Ship: 4 Day(s) or more -
TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed
·Long neck type is ideal for deep cavity milling of deep pockets, etc.
·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Standard Price: MYR 295.47- Days to Ship: 4 Day(s) or more -
Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
MISUMI
[Features]
·Alteration end mill that can specify radius size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- General Steel
Days to Ship: 6 Day(s) or more -
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° radius end mill capable of high-speed and high-efficiency machining- Volume Discount
Standard Price: MYR 275.65- Days to Ship: 4 Day(s) or more -
TSC Series Carbide Uneven Lead 4-Flute Radius End Mill
MISUMI
Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)
- Volume Discount
Standard Price: MYR 161.85- Days to Ship: 4 Day(s) or more -
VAC Series Carbide 4-Flute Uneven Lead Radius End Mill
MISUMI
[Features]
·Suppresses chattering with unequal lead and unequal flutes
·Stable machining is possible while maintaining finished surface accuracy
·Cutting edge radius also reinforced cutting edge rigid
·Can process heat-treated steel up to 50HRC
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 214.81- Days to Ship: 4 Day(s) or more -
NACHI
End mill for aluminum and copper alloys. Capable of rounding corners of grooves.
Standard Price: MYR 323.72 Days to Ship: 5 Day(s) or more -
GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius
OSG
Carbide mushroom-shaped end mill with rounded corners developed for shrink-fit types.
- Volume Discount
Standard Price: MYR 402.99 Days to Ship: 5 Day(s) or more -
CBN End Mills 2 Flutes Short with Corner Radius
OSG
2-Flute Short Corner Radius CBN-CR-EDS
·Demonstrates high performance in machining high-rigid materialsStandard Price: MYR 1,474.91- Days to Ship: 7 Day(s) or more -
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)
OSG
End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.
- Volume Discount
Standard Price: MYR 468.24 Days to Ship: 5 Day(s) or more -
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
- Volume Discount
Standard Price: MYR 508.07 Days to Ship: 5 Day(s) or more -
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Standard Price: MYR 3,975.76- Days to Ship: 5 Day(s) or more -
3 Flutes Short for Copper & Aluminum Alloys
OSG
Even with aluminum part machining requiring large volumes of cutting, the unique groove form simultaneously achieves superior chip discharge performance, large cutting depth and a high feed rate.
- Volume Discount
Standard Price: MYR 389.91- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
- Volume Discount
Standard Price: MYR 698.41- Days to Ship: 7 Day(s) or more -
Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys
OSG
High-rigidity recessed short blade that can be used for everything from roughing to finishing using various cutter paths.
Standard Price: MYR 871.43 Days to Ship: 5 Day(s) or more -
Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation
OSG
Ultra-smooth DLC coating enables semi-dry processing as well as high speed processing of aluminum.
- Volume Discount
Standard Price: MYR 1,956.00 Days to Ship: 7 Day(s) or more -
![C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439283.jpg?$product_view_b$)
C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]
UNION TOOL
[Features]
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Available with an extensive lineup of corner radii- Volume Discount
Standard Price: MYR 241.04- Days to Ship: 5 Day(s) or more -
OSG
The three-dimensional negative shape of the R section provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.
- Volume Discount
Standard Price: MYR 799.69- Days to Ship: 7 Day(s) or more
![C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439283.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Type |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | OSG | UNION TOOL | KYOWA SEIKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | OSG |
| Product Series | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model | DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model | (Economy series) XAL series carbide radius end mill, 2-flute / short model | CNRS 4-flute radius for machining titanium and super heat-resistant alloys | Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC | XAL series carbide radius end mill, 3-flute, 45° torsion / regular model | XAL series carbide radius end mill, 4-flute, 45° torsion / regular model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, 3-flute, 45° spiral / stub model | TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type | TSC series carbide radius end mill, 3-flute, 45° spiral / regular model | TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model | TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model | TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model | TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type | DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model | Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model | Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model | Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model | Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model | TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model | Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill | GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank) | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius | Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys | Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation | C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product] | |||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||
| Blade diameter (D)(φ) | 2 ～ 12 | 2 ～ 12 | 1 ～ 12 | 1 ～ 12 | 1 ～ 5 | 6 ～ 12 | 3 ～ 16 | 4 ～ 12 | 4 ～ 12 | 0 ～ 16 | 10 | 2 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 20 | 2 ～ 12 | 1 ～ 12 | 1 ～ 20 | 1 ～ 20 | 0.2 ～ 3 | 3 ～ 12 | 3 ～ 12 | 2 ～ 12 | 2 ～ 12 | 2 ～ 12 | 5 ～ 22 | 1 ～ 10 | 4 ～ 12 | 2 ～ 20 | 3 ～ 12 | 2 ～ 25 | 1.5 ～ 12 | 3 | 12 | 3 ～ 6 | 0.8 | 4 | 16 ～ 20 | 6 ～ 12 | 6 ～ 20 | 12 | 16 | 1.5 ～ 6 | 0.5 ～ 3 |
| R Size(mm) | 0.5 ～ 2 | 0.2 ～ 1 | 0.1 ～ 3 | 0.1 ～ 3 | 0.3 ～ 1 | - | - | 0.813 ～ 2.438 | 0.813 ～ 2.438 | 0.2 ～ 2 | 0.3 | 0.5 ～ 2 | 0.3 ～ 1 | 0.5 ～ 1 | 0.3 ～ 2 | 0.2 ～ 2 | 0.2 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.05 ～ 0.5 | 0.8 ～ 2 | 0.5 ～ 2 | 0.2 ～ 1 | 0.2 ～ 1 | 0.2 ～ 1 | 0.5 ～ 2 | 0.2 | 1 ～ 2 | 0.1 ～ 3 | 0.2 ～ 1 | 0.2 ～ 6.5 | 0.2 ～ 3 | 0.2 | 0.5 | 0.2 ～ 2 | 0.1 | 1 | 2 | 0.5 ～ 2 | 1.5 ～ 3 | 1 | 0.5 | 0.2 ～ 2 | 0.05 ～ 0.5 |
| Blade length (ℓ)(mm) | 4 ～ 24 | 5 ～ 36 | 3 ～ 30 | 2.5 ～ 30 | 2 ～ 10 | 16 ～ 26 | 4.5 ～ 24 | 8 ～ 24 | 8 ～ 24 | 16 ～ 48 | - | 2 ～ 12 | 4.5 ～ 18 | 4.5 ～ 18 | 5 ～ 26 | 5 ～ 56 | 3 ～ 18 | 1.5 ～ 18 | 2 ～ 40 | 3 ～ 60 | 0.16 ～ 6 | 4.5 ～ 18 | 7 ～ 18 | 5 ～ 36 | 5 ～ 36 | 5 ～ 36 | 9 ～ 33 | 3 ～ 30 | 8 ～ 24 | 4 ～ 60 | 7.5 ～ 38 | 4 ～ 50 | 4 ～ 30 | 8 | 12 | 3 ～ 6 | 1.2 | 11 | 48 ～ 56 | 13 ～ 26 | 12 ～ 40 | 18 | 24 | 3 ～ 15 | 0.3 ～ 1.8 |
| Number of flutes(sheet) | 3 | 2 | 2 | 2 | 3 | - | 3 | 3 | 3 | 3 | 4 | 3 | 3 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 2 | 3 | 3 | 2 | 3 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 2 | 2 |
| Overall Length (L)(mm) | 50 ～ 100 | 40 ～ 80 | 50 ～ 75 | 50 ～ 130 | 60 ～ 70 | 90 ～ 120 | 60 ～ 120 | 50 ～ 100 | 80 ～ 160 | 60 ～ 110 | 90 | 50 ～ 100 | 40 ～ 65 | 60 ～ 100 | 60 ～ 100 | 60 ～ 130 | 35 ～ 60 | 40 ～ 75 | 40 ～ 110 | 45 ～ 125 | 40 ～ 100 | 80 ～ 160 | 60 ～ 100 | 40 ～ 80 | 40 ～ 80 | 40 ～ 80 | 80 ～ 200 | 50 ～ 80 | 70 ～ 140 | 40 ～ 125 | 45 ～ 100 | 50 ～ 120 | 50 ～ 150 | 45 | 34 | 45 ～ 50 | 50 | 70 | 140 ～ 160 | 50 ～ 75 | 80 ～ 150 | 90 | 115 | 45 ～ 50 | 45 ～ 50 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | Aluminum[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] / Copper[◎] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] |
| Shank diameter (d)(mm) | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 ～ 12 | 6 | 6 ～ 12 | 6 ～ 16 | 6 ～ 12 | 6 ～ 12 | 6 ～ 16 | 10 | 4 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 4 ～ 6 | 6 ～ 16 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 3 ～ 10 | 4 ～ 12 | 4 ～ 20 | 3 ～ 12 | 6 ～ 25 | 6 ～ 12 | 6 | 6 | 6 | 6 | 6 | 16 ～ 20 | 6 ～ 12 | 6 ～ 20 | 12 | 16 | 4 ～ 6 | 4 ～ 6 |
| Underneck length (ℓ1)(mm) | - | 23 ～ 50 | - | - | 4 ～ 15 | - | - | - | 35 ～ 108 | - | - | - | - | 14 ～ 68 | 18 ～ 70 | 26 ～ 92 | - | 14 ～ 45 | 17 ～ 45 | 23 ～ 55 | 1 ～ 60 | 24 ～ 105 | - | 23 ～ 50 | 23 ～ 50 | 23 ～ 50 | - | - | 28 ～ 90 | - | - | - | - | - | - | - | 2.4 | - | - | - | - | - | - | - | 1.5 ～ 6 |
| Machining Application | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove |
| Coating | For High Hardness (Silicon Group) | DLC | For General Steels (AlCrN, etc.) | - | TiAlN | For General Steels (AlCrN, etc.) | DLC | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | DLC | For General Steels (AlCrN, etc.) | Non-Coated | TiAlN | TiAlN | TiAlN | Non-Coated | For High Hardness (Silicon Group) | Non-Coated | DLC | TiCN | - |
| Type | High-Feed Radius | radius | radius | radius | radius | - | - | High-Feed Radius | High-Feed Radius | radius | - | High-Feed Radius | radius | radius | radius | radius | radius | radius | radius | radius | Tapered neck radius | Tapered neck radius | radius | radius | radius | radius | radius | radius | Long-Neck Radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius |
| Torsion Angle (θ) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | - | Powerful Torsion (45°-60°) | 45° | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | - | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Other | - | Standard torsion (30-40°) | No torsion | No torsion | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | - |
| R Precision(μm) | ±0.015 | ±0.01 ～ ±0.02 | ±0.02 | - | - | - | - | - | - | ±0.02 | 10 | ±0.015 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.005 ～ ±0.01 | ±0.02 | ±0.02 | ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.02 | ±0.02 | ±0.015 | ±0.02 | ±20 | ±0.02 | - | -0.014～-0.028 | - | - | - | - | - | - | - | - | - | - | - |
![C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439283.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
R Size(mm)
- R0
- 0.05
- 0.1
- F0.12
- F0.16
- 0.2
- F0.2
- F0.24
- F0.28
- 0.3
- F0.32
- 0.4
- F0.4
- 0.5
- 0.5R
- 0.6
- 0.7
- 0.75
- 0.8
- 0.813
- 0.9
- 1
- 1R
- R1
- 1.1
- 1.2
- 1.219
- 1.3
- 1.4
- 1.5
- 1.5R
- R1.5
- 1.6
- 1.625
- 1.7
- 1.8
- 1.9
- 2
- 2R
- R2
- 2.031
- 2.1
- 2.2
- 2.3
- 2.4
- 2.438
- 2.465
- 2.5
- 2.5R
- R2.5
- 2.6
- 2.607
- 2.7
- 2.8
- 2.9
- 3
- R3
- 4
- R4
- 5
- R5
- 6
- R6
- 6.5
- 8
[0.1-3/0.1mm Unit(s)]
-
Blade length (ℓ)(mm)
- 0.16
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.5
- 0.6
- 0.64
- 0.7
- 0.75
- 0.8
- 0.9
- 1
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.25
- 2.4
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6.75
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10.5
- 11
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 20
- 21
- 22
- 24
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 41
- 42
- 45
- 48
- 50
- 54
- 56
- 60
- 75
[5-56/1mm Unit(s)]
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Torsion Angle (θ)
-
R Precision(μm)
Narrow search by specifying Manufacturer
-
- KYOWA SEIKO (12)
- OSG (11)
- DIJET (4)
- SANKO MFG (4)
- OKAZAKI SEIKO (3)
- UNION TOOL (2)
- NACHI (1)
- NS TOOL (1)
- SANDVIK (1)
- THE_CUT (1)
- GUHRING (0)
- 7 LEADERS (0)
- MAPAL (0)
- ATOM (0)
- TAIYO-TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Radius End Mills (Carbide)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy