(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Carbide Ball End Mills（work material：High Hardness Steel-HRC55）
[What is a carbide ball end mill?]
A type of milling cutter. An end mill characterized by a bottom flute with a spherical (round) cutting edge, mainly used for cutting free-form surface shapes. Its main role is cutting molded parts. Due to the spherical cutting edge, it has features that can support various machining shapes.
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model
MISUMI
High-performance MRC series is available in the industry's largest number of sizes
- Volume Discount
- MR
- General Steel
- 2 Flutes
- S (Short)
Standard Price: MYR 80.72- Days to Ship: 4 Day(s) or more -
Coated (TiSiN) Solid Ball End Mill (2 Flute) IC2BHT
THE_CUT
[Features]
· TiSiN coated, compatible with a wide range of steel materials that are HRC50 or less.
· Suitable for use with high speed machinery.
· Long tool life and outstanding cost performance.Standard Price: MYR 119.80- Days to Ship: 18 Day(s) -
NACHI
·CBN ball end mill.
·Suitable for high-speed finishing of high-hardness material dies.Standard Price: MYR 1,716.88- Days to Ship: 5 Day(s) or more -
CFLB, UT Coat 3-Flute Long Neck Ball End Mill
UNION TOOL
[Features]
· Provides amazing high feed compared to the conventional 2-flute long neck ball.
· With new UTCOAT, outstanding lubricity and long life are achieved.
· Designed with 3-flute variable split to reduce chatter, enabling high precision die cutting.
· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip design (excluding R0.75 and below)
· O.D. Tolerance: 0/-0.02- Volume Discount
Standard Price: MYR 185.80- Days to Ship: 5 Day(s) or more -
XAL series carbide ball end mill, 2-flute / short model
MISUMI
XAL Series is the definitive choice for cost-sensitive customers
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: MYR 62.59- Days to Ship: 2 Day(s) or more -
Ball End Type, 2-Flute FX-MG-EBD
OSG
Machining is possible with a wide range of materials, from general materials to hardened steel. Also usable with high-speed machining center.
- Volume Discount
Standard Price: MYR 579.49- Days to Ship: 5 Day(s) or more -
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_b$)
HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]
UNION TOOL
[Features]
· Significantly enhances machining efficiency.
· The chip discharge capacity is up to 27 times higher (compared to the manufacturer's previous product)
· With the newly developed ball tip shape, the bottom surface is treated with non-polish processing
· Reasonable price setting
· Has 4 flutes but is still cheaper than 3-flute types from other companies- Volume Discount
Standard Price: MYR 197.80- Days to Ship: 5 Day(s) or more -
MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill
NS TOOL
The tuned Infinity coating sustains high precision machining for a long time
Standard Price: MYR 218.91- Days to Ship: 11 Day(s) -
UNION TOOL
[Features]
· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
· Supports a wide range from copper and raw materials to 55 HRC.- Volume Discount
Standard Price: MYR 121.09- Days to Ship: 9 Day(s) or more -
GSX MILL Ball End Mill GSXB20000 Type
SUMITOMO_ELEC_
Adopting a low Co carbide base material simultaneously improves rigidity and abrasion resistance. Adopts an ultra-smooth TiAlN-based coating to reduce cutting resistance, improve abrasion resistance, and enable high-efficiency rough machining.
Standard Price: MYR 203.95 Days to Ship: 5 Day(s) or more -
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 164.60- Days to Ship: 7 Day(s) or more -
CBN-LBF 2-Flute High Grade Long-Neck Ball
UNION TOOL
[Features]
· Uses CBN materials (ideal for machining high hardness materials) and features an improved blade shape for high precision and a long service life.
· Excellent abrasion and chipping resistance, ensuring a good machining surface roughness and precision, even when machining for long periods.
· Shank diameter tolerance: 0/-0.004 mm
· Ball radius accuracy: With nominal radius as a base ±0.003 mmStandard Price: MYR 782.33- Days to Ship: 5 Day(s) or more -
TSC series carbide ball end mill (R accuracy ±3μm)
MISUMI
[Features]
·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of molds with high-quality tools with little variation in quality
·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Standard Price: MYR 214.12- Days to Ship: 4 Day(s) or more -
TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model
MISUMI
[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. High precision tools with little quality variation are ideal for high precision 3D machining of molds
·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Standard Price: MYR 216.32- Days to Ship: 4 Day(s) or more -
TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model
MISUMI
[Features]
·Compatible with shrink fit chucks for high-precision machining
·Designed with short flute length and overall length for shrink fit and emphasis on rigidity
It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Standard Price: MYR 87.88- Days to Ship: 4 Day(s) or more -
XAC series carbide ball end mill, 2-flute / short model
MISUMI
[Features]
·General purpose 2-blade ball end mill for wide range of profiling
·For surface coarse of workpiece, good surface finish can be expected after machining.
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- General Steel
- 2 Flutes
- S (Short)
Standard Price: MYR 98.31- Days to Ship: 4 Day(s) or more -
XAC series carbide ball end mill, 2-flute / short, long shank model
MISUMI
[Features]
·Ideal for high accuracy 3D machining of molds due to high tool rigidity and excellent chip removal capability
·For surface coarse of workpiece, good surface finish can be expected after machining.
·Long shank type, ideal for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- General Steel
- 2 Flutes
Standard Price: MYR 197.32- Days to Ship: 4 Day(s) or more -
TSC Series Carbide Ball End Mill 2-Flute / Short Type
MISUMI
[Features]
·Good finish can be expected for surface coarse of workpiece after processing
It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide ball end mill, regular model
MISUMI
[Features]
·Regular bridge length allows for many regrinding times
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
TSC series carbide ball end mill, 2-flute / short, long shank model
MISUMI
[Features]
·Long shank type ideal for deep cavity milling
It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
MISUMI
A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge
- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC series carbide ball end mill, 3-flute / short model
MISUMI
[Features]
·3-flute shape is resistant to chattering and enables high feed
·Surface coarse of workpiece after processing is very good finish.
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide ball end mill, 3-flute / regular model
MISUMI
[Features]
·3-flute shape is resistant to chattering and enables high feed
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
TSC Series Carbide Ball End Mill 4-Flute / Short Type
MISUMI
[Features]
·Surface coarse of workpiece after processing is very good finish.
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide ball end mill, 4-flute / regular model
MISUMI
[Features]
·Surface coarse of workpiece after processing is very good finish.
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining.
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
MISUMI
[Features]
·High stiffness 2-flute type with length taper shape
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: MYR 172.60- Days to Ship: 4 Day(s) or more -
TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model
MISUMI
[Features]
·High-feed, high stiffness 3-flute taper shape with taper length
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·Ultra-fine particle cemented carbide base material suitable for machining high hardness steel is used (according to the manufacturer cutting test results).
·MISUMI original shape with cutting edge rigid treatment and no side cutting edge. High rigid tool and cutting edge strength, achieving stable cutting edge shape and long tool lifespan in high-speed milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 2 Flutes
Standard Price: MYR 476.68- Days to Ship: 4 Day(s) or more -
MISUMI
The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel
- Volume Discount
- TS
- High-Hardness Steel
- 2 Flutes
- B (Stub)
Standard Price: MYR 216.57- Days to Ship: 4 Day(s) or more -
TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
MISUMI
[Features]
·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining
·Taper neck is effective in suppressing chattering
·Machining of high hardness steel up to 65HRC is possible
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Standard Price: MYR 300.69- Days to Ship: 4 Day(s) or more -
MISUMI
CBN ball end mill that's ideal for precision finishing is available at a value price
- Volume Discount
- High-Hardness Steel
- 2 Flutes
Standard Price: MYR 776.71- Days to Ship: 4 Day(s) or more -
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining. Popular ball end mill for high-hardness machining- Volume Discount
Standard Price: MYR 130.96- Days to Ship: 4 Day(s) or more -
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model
MISUMI
High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!
- Volume Discount
- MR
- General Steel
- 2 Flutes
- S (Short)
Standard Price: MYR 73.93- Days to Ship: 4 Day(s) or more -
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model
MISUMI
The user friendly regular flute length type is released simultaneously
- Volume Discount
- MR
- General Steel
- 2 Flutes
- R (Regular)
Standard Price: MYR 86.45- Days to Ship: 4 Day(s) or more -
XAL Series Carbide Ball End Mill, 2-Flute / Regular Model
MISUMI
The regular flute length type is introduced in the low-price and popular XAL balls
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Days to Ship: 4 Day(s) or more -
GS MILL Long Neck Hard Ball GSBNH2
NACHI
[Features]
· Ideal for fine machining of molds.
· Available in various sizes and can be used for all kinds of machining.
· Cutting blades with a tapered back make contact with a workpiece with a shorter length.
· Tapered back for reduction of cutting resistance and achievement of good roughness of the finished surfaceStandard Price: MYR 211.22 Days to Ship: 5 Day(s) or more -
X's Mill Geo Ball Long Shank 2GEOLSR
NACHI
[Features]
A carbide end mill with 2 flutes.
The high cutting speed and high production efficiency lead to overall production cost reduction.
The long shank allows contouring at deep positions and can be lengthened to suit the application.
[Applications]
Suitable for side milling, curved surface milling, engraving, and R-grooving.Standard Price: MYR 981.36- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 434.42 Days to Ship: 6 Day(s) or more -
NACHI
Ideal for precision mold polish-free machining. Rounding accuracy: ±3 μm, rounding accuracy range: 180°
Standard Price: MYR 957.57- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FX-SS-EBD
OSG
Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.
- Volume Discount
Standard Price: MYR 599.23 Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FX-MG-EBD-3
OSG
A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.
Coated for steel
Standard/Alteration category: Manufacturer's standard product
Number of flutes (pcs.) 2
Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)
R Accuracy (µm) ±10- Volume Discount
Standard Price: MYR 499.80 Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute CBN-EBD
OSG
2-Flute Ball End Type CBN-EBD
·Demonstrates high performance in machining high-rigid materials and cast iron
·With a wide variety of lineup of CBN tools, you can select one of the best tool for your application.Standard Price: MYR 1,842.06- Days to Ship: 7 Day(s) or more -
Ball End Type, 2-Flute CBN-SXB
OSG
Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide
Standard Price: MYR 985.37- Days to Ship: 5 Day(s) or more -
OSG
A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.
- Volume Discount
Standard Price: MYR 198.96 Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute WXS-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated high precision ball end mill. Ideal for high-speed direct engraving of hardened steel as well as, of course, high-speed general steel machining.
- Volume Discount
Standard Price: MYR 179.30 Days to Ship: 5 Day(s) or more
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | THE_CUT | NACHI | UNION TOOL | MISUMI | OSG | UNION TOOL | NS TOOL | UNION TOOL | SUMITOMO_ELEC_ | DIJET | UNION TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI | NACHI | NACHI | NACHI | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model | HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product] | TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model | TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model | XAC series carbide ball end mill, 2-flute / short, long shank model | TSC series carbide ball end mill, 2-flute / short, long shank model | TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model | TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model | TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model | TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model | MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model | MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model | |||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 18 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 11 Day(s) | 9 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||
| R Size(mm) | 0.05 ～ 3 | 1.5 ～ 6 | 0.2 ～ 1 | 0.3 ～ 3 | 0.05 ～ 10 | 0.5 ～ 2 | 1 ～ 6 | 0.05 ～ 3 | 0.1 ～ 5 | 0.3 | 0.5 ～ 10 | 0.15 ～ 0.5 | 1.5 ～ 3 | 0.3 ～ 2 | 0.2 ～ 6 | 0.2 ～ 12.5 | 2 ～ 8 | 0.05 ～ 10 | 0.2 ～ 8 | 0.5 ～ 12.5 | 0.5 ～ 5 | 0.5 ～ 10 | 1 ～ 6 | 1 ～ 10 | 1.5 ～ 6 | 0.15 ～ 5 | 0.5 ～ 3 | 1 ～ 5 | 0.3 ～ 3 | 0.75 ～ 3 | 0.3 ～ 1 | 0.5 ～ 5 | 0.1 ～ 10 | 0.2 ～ 8 | 0.2 ～ 8 | 0.5 | 4 ～ 6 | 1.5 | 0.5 ～ 6 | 3 | 0.75 | 3 ～ 6 | 0.2 ～ 1.5 | 0.6 | 2 |
| Blade length (ℓ)(mm) | 0.07 ～ 6 | 6 ～ 24 | 0.3 ～ 1.4 | 0.48 ～ 4.8 | 0.2 ～ 38 | 2.5 ～ 8 | 3 ～ 18 | 0.1 ～ 10 | 0.3 ～ 15 | 0.9 | 1.5 ～ 30 | 0.24 ～ 0.7 | 4.5 ～ 9 | 0.6 ～ 4 | 0.4 ～ 12 | 0.8 ～ 50 | 8 ～ 30 | 0.2 ～ 25 | 1.5 ～ 30 | 2 ～ 30 | - | 2 ～ 25 | 5 ～ 22 | 3 ～ 25 | 5 ～ 22 | 0.3 ～ 8 | 0.8 ～ 6 | 1 ～ 5 | 0.6 ～ 6 | 1.2 ～ 4.8 | 0.5 ～ 1.2 | 1 ～ 10 | 0.4 ～ 25 | 1.5 ～ 30 | 1.5 ～ 48 | 1.5 | 12 ～ 18 | 3 | 1.5 ～ 18 | 12 | 4 | 4 ～ 7 | 0.3 ～ 1.8 | 3 | 4 |
| Underneck length (ℓ1)(mm) | 0.2 ～ 50 | - | 1.2 ～ 5.5 | 2 ～ 40 | - | - | - | - | - | 1.2 | 3 ～ 12.5 | - | - | - | - | - | - | 15 ～ 75 | 17 ～ 80 | 15 ～ 80 | 4 ～ 55 | 15 ～ 75 | 17 ～ 72 | 15 ～ 75 | 17 ～ 72 | 2 ～ 60 | 7 ～ 60 | 5 ～ 10 | - | 20 ～ 50 | 1.5 ～ 5 | 2.2 ～ 20 | - | - | - | - | - | 4.5 | - | - | - | 20 | 1.2 ～ 6 | - | 8 |
| Shank diameter (d)(mm) | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 | 3 ～ 20 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 10 | 4 | 4 ～ 20 | 4 | 6 | 6 | 4 ～ 12 | 3 ～ 25 | 4 ～ 16 | 3 ～ 20 | 4 ～ 16 | 3 ～ 25 | 6 ～ 10 | 6 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 4 ～ 12 | 4 ～ 8 | 6 ～ 10 | 6 | 4 ～ 8 | 4 | 4 ～ 10 | 4 ～ 20 | 4 ～ 16 | 4 ～ 16 | 4 | 8 ～ 12 | 6 | 4 ～ 12 | 5 | 3 | 6 ～ 12 | 4 ～ 6 | 4 | 4 |
| Number of flutes(sheet) | 2 | 2 | 2 | 3 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 4 | 4 | 2 | 3 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 50 ～ 110 | 50 ～ 75 | 50 | 50 ～ 90 | 40 ～ 160 | 50 ～ 70 | 50 ～ 110 | 50 ～ 80 | 50 ～ 100 | 50 | 50 ～ 180 | 50 | 60 ～ 90 | 40 | 40 ～ 65 | 40 ～ 180 | 100 ～ 250 | 40 ～ 150 | 50 ～ 140 | 70 ～ 280 | 70 ～ 90 | 50 ～ 150 | 50 ～ 110 | 50 ～ 150 | 60 ～ 110 | 50 ～ 110 | 50 ～ 110 | 50 ～ 90 | 40 | 70 ～ 110 | 50 | 50 ～ 100 | 50 ～ 150 | 50 ～ 140 | 50 ～ 140 | 45 | 180 ～ 200 | 60 | 50 ～ 120 | 120 | 40 | 90 ～ 110 | 45 ～ 50 | 50 | 60 |
| work material | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[○] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] | High Hardness Steel-HRC55[◎] |
| R Precision(μm) | ±0.005 | - | - | -0.007～0.007 ～ -0.005～0.005 | -0.007 ~ +0.003 ～ ±0.01 | -0.01～+0.01 | -0.01～0.01 ～ -0.005～0.005 | 0.002～-0.002 | -0.007～0.007 ～ -0.005～0.005 | ±0.01 | 5～-5 ～ 10～-10 | ±3 | -0.005 ~ +0.001 ～ ±0.003 | ±0.003 | -0.007 ~ +0.003 ～ ±0.005 | ±0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | ±0.01 | -0.005 ~ +0.001 ～ ±0.003 | -0.007 ~ +0.003 ～ ±0.005 | ±0.005 | ±10 | ±0.005 ～ ±0.01 | ±0.005 ～ ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | - | 0～-0.03 | - | -0.003～+0.003 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | -0.005～+0.005 | -0.01～+0.01 | -0.007～+0.007 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | R Groove | Curved surface / R Groove | - | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
| Coating | MRC | Other | - | TiCN | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | TiAlN | TiCN | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | MRC | MRC | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | TiAlN | For High Hardness (Silicon Group) |
| Type | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Long-Neck Ball / Spherical Ball | Ball | Ball | Ball | Ball | Tapered neck ball | Tapered neck ball | Ball | Ball | Tapered neck ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball |
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- R0.9
- 0.95
- 1
- R1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 25
-
Blade length (ℓ)(mm)
-
0.01～0.96
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.76
- 0.8
- 0.84
- 0.9
- 0.95
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.25
- 1.26
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.75
- 3.8
- 3.85
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.5
- 7
- 7.1
- 7.2
- 7.4
- 7.5
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.5
- 9
- 9.5
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.5
-
12～12.5
- 12
- 12.5
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.5
-
15
-
16～16.5
- 16
- 16.5
-
17
-
18
-
19
-
20
-
22
-
23
-
24
-
25
-
26
-
28
-
29
-
30
-
32
-
34
-
35
-
36
-
38
-
40
-
45
-
48
-
50
-
55
-
60
-
70
-
80
[5-30/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
R Precision(μm)
-
Machining Application
-
Coating
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Narrow search by specifying Manufacturer
-
- NS TOOL (24)
- OSG (22)
- UNION TOOL (14)
- NACHI (6)
- DIJET (5)
- THE_CUT (4)
- KYOWA SEIKO (3)
- SANDVIK (3)
- KYOCERA (2)
- OKAZAKI SEIKO (2)
- SANKO MFG (2)
- 7 LEADERS (1)
- CREATE TOOL (1)
- SUMITOMO_ELEC_ (1)
- SPEED TIGER (0)
- VAN_HOORN (0)
- GUHRING (0)
- ATOM (0)
- MAPAL (0)
- WIDIN (0)
- ASAHI TOOLS (0)
- EIKOSHA (0)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy