(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
CA3 Series SNMG (PH Breaker)
[Features]
· High film adhesion strength prevents peeling and achieves stable machining
· Hard surface coating: Abrasion resistance is improved with the adoption of a hard surface coating
· High performance α-Al2O3 film: Excellent abrasion resistance and fracture resistance
· High adhesion strength interface: Crystalline structure improvements increase film adhesion strength between each layer
· Fine TiCN coating: Finer TiCN crystals increase hardness and improve abrasion resistance
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Nose R | Inscribed Circle Diameter (mm) | Thickness (mm) | Hole Diameter (mm) | Remarks |
|---|---|---|---|---|---|---|---|---|---|
MYR 45.28 | 10 Piece(s) | 6 Day(s) or more | 0.8 | 12.7 | 4.76 | 5.16 | Material: CA310 Gray Cast Iron (FC) | ||
MYR 45.28 | 10 Piece(s) | 6 Day(s) or more | 0.8 | 12.7 | 4.76 | 5.16 | Material: CA315 Ductile Cast Iron (FCD) | ||
MYR 45.28 | 10 Piece(s) | 6 Day(s) or more | 0.8 | 12.7 | 4.76 | 5.16 | Material: CA320 | ||
MYR 45.28 | 10 Piece(s) | 6 Day(s) or more | 1.2 | 12.7 | 4.76 | 5.16 | Material: CA310 Gray Cast Iron (FC) | ||
MYR 45.28 | 10 Piece(s) | 6 Day(s) or more | 1.2 | 12.7 | 4.76 | 5.16 | Material: CA315 Ductile Cast Iron (FCD) | ||
MYR 45.28 | 10 Piece(s) | 6 Day(s) or more | 1.2 | 12.7 | 4.76 | 5.16 | Material: CA320 | ||
MYR 45.28 | 10 Piece(s) | 6 Day(s) or more | 1.6 | 12.7 | 4.76 | 5.16 | Material: CA310 Gray Cast Iron (FC) | ||
MYR 45.28 | 10 Piece(s) | 6 Day(s) or more | 1.6 | 12.7 | 4.76 | 5.16 | Material: CA315 Ductile Cast Iron (FCD) | ||
MYR 45.28 | 10 Piece(s) | 6 Day(s) or more | 1.6 | 12.7 | 4.76 | 5.16 | Material: CA320 | ||
MYR 81.66 | 10 Piece(s) | 6 Day(s) or more | 1.2 | 15.875 | 6.35 | 6.35 | Material: CA310 Gray Cast Iron (FC) | ||
MYR 81.66 | 10 Piece(s) | 6 Day(s) or more | 1.2 | 15.875 | 6.35 | 6.35 | Material: CA315 Ductile Cast Iron (FCD) | ||
MYR 81.66 | 10 Piece(s) | 6 Day(s) or more | 1.2 | 15.875 | 6.35 | 6.35 | Material: CA320 | ||
MYR 81.66 | 10 Piece(s) | 6 Day(s) or more | 1.6 | 15.875 | 6.35 | 6.35 | Material: CA310 Gray Cast Iron (FC) | ||
MYR 81.66 | 10 Piece(s) | 6 Day(s) or more | 1.6 | 15.875 | 6.35 | 6.35 | Material: CA315 Ductile Cast Iron (FCD) | ||
MYR 81.66 | 10 Piece(s) | 6 Day(s) or more | 1.6 | 15.875 | 6.35 | 6.35 | Material: CA320 |
Loading...
Basic Information
| Shape | S (Square) | work material | Cast Iron | Breaker Use | Rough Cutting |
|---|---|---|---|---|---|
| Rake angle | Negative | Coating Structure | Fine TiCN Coating |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Insert (For SEC-Small Diameter Cut-Off Tool Bit SCT Type), Left-Handed Insert For Right-Handed Holder
- Replacement Blade Insert T (Triangle) TNGG-R-FX
- Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○ZS "for Rough Cutting" for Cast Iron
- 60° Triangle Negative with Hole TNMG16○○XQ "Medium Cutting" Mild Steel
- 80° Hexagon Type Negative with Hole WNGG○○ TK "Medium to Rough Sharp Edge" Stainless Steel Heat-resistant Alloy
- Tip for Lathe, CBN Diamond, Positive TPGB
- Outer Diameter Thread Cutting Tip 16ER/L550○
- Kyocera Turning Insert PV720 PVD Cermet
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy